High efciency single and multizone ductless
with Fast Pro™, Friedrich's contractor-friendly
features for easy installation and faster service
PREMIER Series
Exceptional quality and our highest efciency line
with Fast Pro™, Friedrich's contractor-friendly
features for easy installation and faster service
SELECTSeries
Excellent efciency and outstanding quality
make Select a truly exceptional value line
THE EXPERTS IN ROOM AIR CONDITIONING
THE CONTRACTOR'S CHOICE FOR DUCTLESS.
Three exceptional lines of ductless with unique features for easy installation and
fast service. All with the performance and value you expect from Friedrich.
Friedrich Precision Inverter® delivers
exceptional energy efficiency and
smooth performance
Precision Inverter technology varies the
compressor, the outdoor and the indoor fan
speeds, eliminating constant compressor
start-ups/shut-downs that traditional
systems require to maintain the set
temperature. Soft start technology starts
the compressor with minimal amperage at
start up, saving energy versus compressors
utilizing locked rotor amperage (LRA).
Each system can adjust capacity and cooling
output to provide only the amount of cooling
needed at a given time. The result is optimal
comfort with low energy costs.
2 | FLOATING AIR® SERIES DUCTLESS
THE ADVANTAGES OF INVERTER DUCTLESS SYSTEMS
TRADITIONAL SYSTEMINVERTER SYSTEM
At initial start up, a xed capacity
system slowly reaches the set
temperature.
Complete shutdown once set
temperature is achieved.
Temperature within the space
rises until 2nd system start up.
System works at full capacity to
again reach set temperature.
System cycles on and off
continually to maintain the set
temperature.
At initial start up, utilizes
variable capacity to quickly
reach the set temperature.
Reduces capacity as set
temperature is achieved.
Variable capacity maintains
set temperature keeping
space comfortable with
reduced energy consumption.
MULTIZONE SYSTEMS PROVIDE TOTAL FLEXIBILITY.
MIX AND MATCH SYSTEMS TO FIT MOST APPLICATIONS.
Zone cooling and heating
provides unmatched
customized comfort and
energy savings
Occupants have the ability to
set the temperature of each
zone to their preferred comfort
level*, or turn off units in
unoccupied rooms without
affecting other zones.
That’s the beauty and efficiency
of a Friedrich Ductless
Multizone System.
*Multizone units cannot heat and cool simultaneously.
3
A UNIQUE DESIGN THAT MAKES FRIEDRICH—
THE EASIEST DUCTLESSTO
INSTALL, CLEAN & SERVICE
THE PROBLEM:
On typical ductless indoor units, accessing
the indoor coils is extremely difcult and
takes so much time that a thorough cleaning
may be next to impossible.
Access to piping, wire terminal blocks, the
fan and fan components is also a challenge.
THE SOLUTION:
Friedrich FastPro was designed with the
HVAC technician in mind. In a few easy steps
that can be performed in minutes, the entire
blower wheel assembly can be removed for
easier, faster cleaning and service.
Also, you'll have easy access to the terminal
blocks. FastPro will save you hours on the
jobsite.
MODEL IDENTIFICATION GUIDE
Model Type:
FR- Floating Air Premier
FP- Floating Air Pro
FS- Floating Air Select
Function:
HS – Heat Pump Single
HM – Heat Pump Multi
HF – Heat Pump Flex Single and
Multizone
28 1/8 x 19 x 9 7/1631 7/8 x 23 x 1128 1/8 x 19 x 9 7/1631 7/8 x 23 x 11
657859.572.5
6882.56579
859879.592.5
92.25106.7589.25103.25
7500
3.42
1
/4
3
/
8
Your operating costs will depend on your utility rates and use. The estimated operating cost is based on a electricity cost of $ .12 per kWh.
For more information, visit w ww.ftc.gov/energy.
Due to continuing research in new energy-saving technology, specications are subject to change without notice.
7
Pro Series|Ductless Split Systems
SINGLE ZONE • WALL-MOUNTED HEAT PUMPS
The contractor’s line with extensive features to make installation and service
faster and easier. Exceptional efficiency and dependable performance.