FreeVision Vilta Quick Start Quide

VILTA

Operation Manual

QUICK START

www.freevisiontech.com

welcome

1. VILTA contains two modes: Denoising and Performance
Denoising is default mode, suitable for all scenarios. Be sure
to select Denoising mode when you have high requirement
on audio quality.
The Performance is strengthen mode, which will greatly
improve the stability of gimbal. The motor response is radical
that will be accompanied with some noise.

The Performance only applies to scenes that require extreme

high stability accuracy and do not need camera to do audio
recording. (Denosing and Performance can be switched in App)

2. The GoPro5 adaptive recording function will greatly amplify the
background sound. Please select Wind Only mode on GoPro 5

to minimize the noise to the lowest. GoPro3 and GoPro4 do

not have this problem.

Important Statement

Please visit official website to download the latest User Mannual

01

02

1

2

3

4

5

6

7

8

9

10

11

11

12

13

14

17

21

17

18

19

22

20

15

16

1. Tilt Axis

2. Roll Axis

3. Pan Axis

4. Power Switch

5. Record Button

6. Status Indicator

7. Joystick

8. Charging Port

9. Dismantle Button

10. Lanyard Hole

11.Camera Knob

12.Camera Frame

13.Pan Axis Lock

14.Extended Interface

15. Trigger

16.VILTA Pocket

17. Golden Finger Connector

18. 1/4 Screw Hole

19. Accessory Mounting Port

20. Power Status Indicator

21. Charging Port

22. Charging Adapter (optional)

Product Overview

03

04

Installation

1

Unlock Gimbal

1

Install Camera

2

Handle Dismantle and Mantle

3

Install Accessory

4

Accessory Connector

1/4 Screw Hole

User Guide

1) Slide the Pan Axis Lock down

2) Twist the Tilt Aixs and Roll Axis to unlock

The Statu Indicator will flash red if any axis is locked

Insert GoPro in the Camera Frame
Fasten the knob as indicated

1. If you are Hero 3/3+/4 user, insert camera in the
VILTA Pocket before install

2. To avoid the camera falling, please ensure the
knob is fastened before power on

Dismantle: Press Dismantle Button, hold gimbal,
move forward and release

Mantle: Release Dismantle Button, match the base
with the handle, slight push the base forward

Ensure you hear a clicking sound while mantling
handle

Adapt with GoPro accessories and tripod