Freeplay Energy Sherpa LED User Manual

a

herp
S

To self-charge, fold
handle out fully

Wind handle clockwise
or anticlockwise
illuminating the green LED

The Freeplay Sherpa LED Eco-Charge Flashlight,
designed for absolute reliability, offers the choice
of 2 brightness settings providing bright and dependable
light in one compact rugged unit for both everyday
and emergency use with the peace of mind of never
needing to ever replace batteries or bulbs.

With the Freeplay Sherpa LED you’ve got light
anytime, anywhere.

Controls

1. USB input socket

2. 3 way switch

3. Lens enclosure

4. Optimum charge level indicator

5. Winder handle

Switch Controls

Normal beam
Off
High Beam

Congratulations on purchasing the Freeplay Eco-Charge Sherpa LED flashlight

Please read these operating instructions carefully before using your flashlight
and retain them for easy reference

FEATURES

• Mini USB recharge capability with internal
rechargeable Ni-MH battery for ultra bright light

• Freeplay direct charge alternator

• The Sherpa LED gives you a choice between
energy saving and full power settings

• Up to 18 hours of continuous shine time when
fully charged

• Optimum charge level indicator for ease of use

• Ultra bright white LED with a 100 000 hour life

• Splash resistant

• Non Slip rubberised gip

External charging

To charge from the wall, switch the flashlight off.
Plug a Mini USB lead into the USB socket located
at the side of the flashlight.
After approx 4 hours the flashlight will be fully
charged. Do not charge for longer than a maximum
of 5 hours.

Self charge operation

To operate, hold the flashlight firmly and crank the
winder handle in any direction. A self charge of
about 60 seconds will provide approximately 30
minutes of light (normal beam setting). The
flashlight can be cranked further at anytime to
extend shine times.
The Sherpa LED flashlight is equipped with a LED
charge level indicator, situated next to the winder
handle, which signals when the optimum input effort
is reached. Cranking faster will put a higher level of
charge rate into the battery and consequently
increase shine times.
Cranking the winder handle drives the internal
alternator via a transmission, generating
self-powered energy which is stored in the internal
battery.

OPERATION

To prolong battery life, always switch the flashlight
off after use. A constant drain on a fully discharged
battery will shorten the battery life. Do not open
the casing other than when disposing of the unit.
Cover the USB input socket with the attached
rubber cap when not charging the product.
When cleaning, do not use abrasives or chemicals.
Only use a damp cloth and mild detergents.

Internal battery
For best results, the internal battery requires a
brisk conditioning wind for 30 seconds, followed by
a charge for 4 hours prior to first use.
The flashlight can, however, be used immediately
in the “self charge” mode if required.

USB charger

A standard 5V 500mA mini USB charging protocol
means that one charger will now be able to charge
most Freeplay products. You may already own a
compatible charger (received with a mobile phone,
PDA or digital camera). A compatible accessory
range increases your charging options from the wall
to the car, the sun and from your PC.
We recommend that our products are externally
charged for extended usage needs. Before you
purchase a USB charging accessory, consider the
environment and be sure that you don't already
own an appropriate charging device.

LED

The Light source is a ultra bright high power white
LED. The LED operates at 2 different brightness
settings, the high intensity beam is designed for very

PRECAUTIONS

Please consider the environment before printing this manual

2

5

4

1

bright high-powered illumination after charging the
flashlight. The low intensity setting provides greatly
increased shine time and delivers extended
illumination performance in self-charge mode should
the battery become discharged.
Do not look directly into the LED when switched on.

SPECIFICATIONS

Power source
Self charge : AC alternator driven by the
crank via a 2 stage transmission

Rechargeable battery

Non-removeable rechargeable 3.6V Ni-MH
battery pack

Light source
An ultra bright white 8mm LED

Adaptor charge rate

4 hours -100% capacity
Do not charge for longer than 5 hours
As a guide a constant input effort of 40 minutes
would fully charge the battery

FREEPLAY 1 YEAR WARRANTY

The manufacturer undertakes that, if within 1 (one) year of purchase, this appliance or any part
thereof is proved to be defective by reason of faulty workmanship of materials , we will, at our
option repair or replace the same free of charge for labour or materials on condition that:

1. The original invoice or sales receipt (indicating
the date of purchase, product type and dealers
name is presented with the defective unit.

2. The complete unit is returned, postage paid, to
the manufacturer or country distributor.

3. The unit has not been serviced, maintained,
repaired, taken apart or tampered with by
any person not authorised by the manufacturer.

To learn more about Freeplay products visit us at

www.freeplayenergy.com

The LEDS have a useful life of up to 100 000 hours
and never require replacing.

Disposal of unit

Ni-MH batteries should be recycled or disposed
of in a environmentally friendly way as prescribed
by your local regulations.

Performance
Shine time

Fully charged battery - 18 hours
60 second self charge - 30 min

Dimensions
Metric (mm) Imperial (Inches)

Height 55 2.1
Length 160 6.3
Width 60 2.4
Weight 349g 12.3 oz

4. All service work is undertaken by the
manufacturer or appointed agents.

5. Any defective unit or part shall become the
property of the manufacturer.

6. This warranty is in addition to your statutory
rights.

7. This warranty excludes damage caused by
misuse or neglect.

3