Freeplay Energy ML-1 Mini Lantern User Manual
ML-1
To self-charge, fold
handle out fully
E
C
O
-
C
H
A
R
G
E
lantern
www.freeplayenergy.com
Wind handle clockwise
or anticlockwise, illuminating
the green LED
The Freeplay ML-1 Eco-Charge LED Lantern,
incorporating Freeplay's self-sufficient energy
technology, is a compact, lightweight and
dependable lantern on the market - providing
clean and convenient light anytime, anywhere.
English
1
5
2
3
4
Controls
1. Hanging/Carry Handle
2. Lens
LED
3. task light
4. Control Panel:
A. Thumbwheel (LED array)
B. Power Switch (Task light)
5. Winder Knob
6. Ultra bright LED array
7. Charging Indicator LED
8. Power Input Socket
9. Battery Pack
10. Battery Cover Screws
Congratulations on purchasing the Freeplay ML-1 Eco-Charge LED lantern
Please read these operating instructions carefully before using your lantern and retain them for
easy reference. Record the serial number, to be quoted when dealing with Freeplay
Serial number:_____________________________________________________________
or a recognized Freeplay distributor regarding this product:
FEATURES PRECAUTIONS
• Light weight (300 grams with battery)
• 8 hours of Bright light shine time on full charge
• Ultra fast charge via AC/DC , 90% charge within
3 hours
• Up to 100 hours constant shine
• Removable, replaceable battery pack
• Nichia LEDs
• Energy efficiency meter
• Extremely durable – built to last
• Glow-in-the-dark locator
External Charging
To charge from a wall socket, switch the lantern off.
Plug the wall charger into the Power Input Socket (8).
The green LED (7) above the crank handle will
illuminate, indicating a rapid charge. After approx. 3hours the lantern will be 90% charged. The charge
indicator will then flash, indicating that the charge
rate has decreased to a constant trickle charge for
the balance of the charge cycle. The adapter can
remain safely plugged in while providing this
continuous trickle charge. The battery will be fully
charged in 8 hours from.
A
Ultra bright
Night light
(ON/OFF)
B
OPERATION
Self-charge Operation
To operate, hold the lantern firmly and crank the
winder handle in either direction, making sure that
you are cranking fast enough to illuminate the
Charging Indicator LED (7) constantly. A selfcharge of about 1 minute will provide up to 60
minutes of night light. The lantern can be cranked
further at any time to extend shine times.
Cranking the winder handle drives the internal
alternator via a transmission, generating selfpowered energy which is stored in the internal
battery.
9
10
To prolong battery life, always switch the
flashlight off after use. A constant drain on a fully
discharged battery will shorten the battery life.
Do not open the casing, other than when
removing or replacing the battery pack.
Do not crank the lantern without the battery
pack inserted.
When cleaning, do not use abrasives or
chemicals. Only use a damp cloth and mild
detergents.
Internal battery
For best results, the internal battery requires a
conditioning charge for 8 hours prior to first use.
The lantern can, however, be used immediately in
the "self-charge mode" if required.
6
7
8
Light Options
The ML-1 has 2 light options: A space
illuminating 4 LED array and an LED task light
.
The brightness of the 4 LED array is controlled
by a dimmer switch and can be adjusted using the
thumbwheel control (4A) to give you the option of
selecting any brightness - from night light to ultra
bright. This unique feature lets you match your
lighting requirements to your specific application,
maximizing your energy efficiency.
An energy efficiency meter is incorporated into
the thumbwheel. As you rotate the thumbwheel,
the switch will illuminate to indicate the efficiency
of the light setting selected. Green indicates a low
energy usage and a prolonged total shine time.
Red indicates a high energy use and a shorter
total shine time.
A glow-in-the-dark band around the thumbwheel
helps to help locate the lantern in the dark.
The directional Task Light LED has a fixed
brightness, and is independently controlled by the
power switch below the dimmer switch (4B). This
LED can also be used while the LED array is on.
The downward angle of the LED makes it an ideal
task light for illuminating specific areas for reading
or working, and can also be used as a handy
flashlight.
Replacing the Battery Pack
Spare battery packs can be carried with the
lantern to conveniently extend shine times when
you are away from grid access for prolonged
periods.
To replace the battery pack, remove the 2 battery
cover screws (10) at the base of the ML-1.
Remove the cover, exposing the battery pack.
Pull the release catch, ejecting the battery. Insert
a replacement battery, replace the cover and
screws.
Do not crank the lantern with the battery pack
removed.
When disposing of the unit, the battery pack
should be removed first. Ni-MH batteries should
be recycled or disposed of in an environmentally
friendly way as prescribed by your local
regulations.
SPECIFICATIONS
Power Source:
Self-charge: AC alternator driven by the crank via a
transmission
Rechargeable Battery
Removable rechargeable 3.6 V Ni-MH battery pack.
Light Source:
Ultra Bright white Nichia LED array (4 LEDs)
5 mm Single Ultra Bright white Nichia LED
Adapter Charge rate:
3 90
hours - % capacity
8 hours - 100% capacity
Shine Time:
4 LED Array
Fully recharged battery - 100 hours (night light)
Fully recharged battery - 8 hours (max-bright)
60-second self-charge - 1 hour (night light)
60-second self-charge - 7 minutes (max-bright)
Single LED
Fully Charged - 40 hours
60 second self-charge - 45 minutes
Dimensions: Metric (mm) Imperial (inches)
Height 165 (6.5) Width 56 (2.2)
Length 62 (2.5) eight 300g 10.5 ozW ( )
FREEPLAY 2 YEAR WARRANTY
The manufacturer undertakes that, if within 2 (two) years of purchase, this appliance or any part
thereof is proved to be defective by reason of faulty workmanship or materials, we will, at our
option repair or replace the same free of charge for labour or materials on condition that:
1. The original invoice or sales receipt (indicating
the date of purchase, product type and dealer's
name) is presented together with the defective
unit.
2. The complete unit is returned to the manufacturer
or country distributor, postage paid.
3. The unit has not been serviced, maintained,
repaired, taken apart or tampered with by
This warranty excludes damage caused by misuse or neglect. To register please complete the online
Customer Care: info@freeplayenergy.com
To learn more about Freeplay products visit us at:
registration form at:
www.freeplayenergy.com
www.freeplayenergy.com
any person not authorised by the manufacturer.
4. All service work is undertaken by the
manufacturer or appointed agents.
5. Any defective unit or part shall become the
property of the manufacturer.
6. This warranty is in addition to your statutory
rights.
Please consider the environment before printing this manual
Loading...