FreeMotion VMTL839071 Owner's Manual
Model No. VMTL83907.1
Visit our website at
www.weslo.com
new products, prizes,
fitness tips, and much more!
Visit our website at
www.freemotionfitness.com
Serial No.
Write the serial number in the space
above for future reference.
Serial
Number
Decal
QUESTIONS?
At FreeMotion Fitness, we are
committed to providing complete
customer satisfaction. If you have
questions, or if parts are damaged
or missing, PLEASE CONTACT
THE STORE WHERE YOU PURCHASED THIS PRODUCT.
USER’S MANUAL
If you are unable to contact the
store, please see HOW TO
CONTACT CUSTOMER CARE on
page 2.
CAUTION
Read all precautions and instructions in this manual before
using this equipment. Keep this
manual for future reference.
TABLE OF CONTENTS
How to Contact Customer Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
SECTION 1
Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Warning Decal Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
How to Move the Incline Trainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
SECTION 2
Incline Trainer Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
How to Upgrade the Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
SECTION 3
Preventive Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Six-month Preventive Maintenance Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
SECTION 4
Exercise Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
SECTION 5
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Part List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Exploded Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
FREEMOTION is a registered trademark of ICON IP, Inc.
1
HOW TO CONTACT CUSTOMER CARE
If you have questions after reading this manual, if you require assistance, or if you need to order replacement
parts, please contact Customer Care at the address or phone number listed below. Please be prepared to provide the following information:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
When ordering replacement parts, please also provide the KEY NUMBER and DESCRIPTION of the part(s) (see
the PART LIST and the EXPLODED DRAWING near the end of this manual).
Call
Toll-free in the US: 1-866-799-8946, Mon.–Fri. 8 a.m.–5 p.m. MST
International: +1-719-533-2911
Email
US: fmfvmcustomerservice@freemotionfitness.com
International: intlcustomercare@freemotionfitness.com
Write
FreeMotion Fitness
1096 Elkton Drive Suite 600
Colorado Springs, CO 80907
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read all important precautions and in-
tructions in this manual and all warnings on your incline trainer before using your incline trainer.
s
FREEMOTION FITNESS assumes no responsibility for personal injury or property damage sustained
by or through the use of this product.
1. Before beginning any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems.
2. It is the responsibility of the owner to ensure
that all users of the incline trainer are adequately informed of all warnings and precautions.
3. Use the incline trainer only as described in
this manual.
4. Place the incline trainer on a level surface,
with at least 8 ft. (2.4 m) of clearance behind
it and 2 ft. (0.6 m) on each side. Do not place
the incline trainer on any surface that blocks
air openings. To protect the floor or carpet
from damage, place a mat under the incline
trainer.
5. Keep the incline trainer indoors, away from
moisture and dust. Do not place the incline
trainer in a garage or covered patio, or near
water.
6. Do not operate the incline trainer where
aerosol products are used or where oxygen
is being administered.
7. Do not operate the incline trainer until it is
properly assembled (see ASSEMBLY on page
7).
8. Inspect and properly tighten all parts of the
incline trainer regularly.
9. Keep children under the age of 12 and pets
away from the incline trainer at all times.
wear athletic shoes. Never use the incline
trainer with bare feet, wearing only stockings,
or in sandals.
12. When connecting the power cord (see page
13), plug the power cord into a surge suppressor (not included) and plug the surge
suppressor into a grounded circuit capable
of carrying 15 or more amps. No other appli
ance should be on the same circuit. Do not
use an extension cord.
13. Use only a single-outlet surge suppressor
that meets all the specifications described on
page 13. To purchase a surge suppressor,
contact the store where you purchased this
product, or see your local electronics store. If
you are unable to contact a store, please see
HOW TO CONTACT CUSTOMER CARE on
page 2 and order part number 146148.
14. Failure to use a properly functioning surge
suppressor could result in damage to the control system of the incline trainer. If the control
system is damaged, the walking belt may
change speed, accelerate, or stop unexpectedly, which may result in a fall and serious injury.
15. Keep the power cord and the surge suppressor away from heated surfaces.
16. Never move the walking belt while the power
is turned off. Do not operate the incline
trainer if the power cord or plug is damaged
or if the incline trainer is not working properly. (See TROUBLESHOOTING on page 29 if
the incline trainer is not working properly.)
-
The incline trainer should not be used by per-
10.
sons weighing more than 350 lbs. (159 kg).
Do not allow more than one person on the incline trainer at a time.
11. Wear appropriate exercise clothes when
using the incline trainer. Do not wear loose
clothes that could become caught in the incline trainer. Athletic support clothes are recommended for both men and women.
Always
17. Read, understand, and test the emergency
stop procedure before using the incline
trainer (see page 16).
18. Never start the incline trainer while you are
standing on the walking belt. Always hold the
handrails while using the incline trainer.
19. The incline trainer is capable of high speeds.
Adjust the speed in small increments to
avoid sudden jumps in speed.
3
20. Never leave the incline trainer unattended
hile it is running. Always remove the key, un-
w
plug the power cord, and move the reset/off
circuit breaker to the “off” position when the
incline trainer is not in use. (See the drawing
n page 6 for the location of the reset/off cir-
o
cuit breaker.)
21. Do not change the incline of the incline
trainer by placing objects under it.
22. Never insert or drop any object into any
opening on the incline trainer.
23. Make sure to perform all maintenance proce-
dures outlined in this manual. Failure to do
SAVE THESE INSTRUCTIONS
so will void the warranty and may result in
amage to the incline trainer.
d
DANGER: Always unplug the power
24.
cord immediately after use, before cleaning
the incline trainer, and before performing the
aintenance and adjustment procedures de-
m
scribed in this manual. Servicing other than
the procedures in this manual should be performed by an authorized service representative only.
25. The incline trainer is intended for in-home
use or light commercial use only. Do not use
the incline trainer in a commercial, rental, or
institutional setting.
4
WARNING DECAL PLACEMENT
Disconnect line cord from outlet
before servicing.
HAZARDOUS
VOLTAGE
Disconnect power
before servicing.
The decals shown have been
applied in the indicated locations. If a decal is missing or
llegible, see the front cover
i
of this manual and request a
free replacement decal.
Apply the decal in the location shown.
may not be shown at actual
size.
Note: The decals
Note: There is one decal on
each side.
5
BEFORE YOU BEGIN
Congratulations for selecting the revolutionary
FREEMOTION®i7.7 incline trainer. The i7.7 incline
trainer offers an impressive array of features designed
o help you achieve your fitness goals in the conve-
t
nience and privacy of your home.
For your benefit, read this manual carefully before
using the incline trainer. If you have questions after
Handgrip Pulse Sensor
Accessory Tray
Handrail
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
odel number and the location of the serial number
m
decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Console
Roller
Adjustment
Bolts
Walking Belt
Foot Rail
Reset/Off Circuit
Breaker
Power Cord
Key/Clip
Platform Cushion
6
ASSEMBLY
1/2” Screw (119)–1
5
/16” Star
Washer (48)–4
3 1/2” Bolt (64)–2
1/2" Jamnut (5)–4
1/2" Star
Washer (7)–4
5/16" Star
Washer (8)–4
3/8" Star
Washer (9)–4
3/8" Nut (42)–2
3/8" Wheel
Washer (57)–2
3/8" x 2" Bolt (3)–4
1/2" x 3 1/4" Bolt (1)–4
3/8" x 2 1/2" Wheel
Bolt (34)–2
5/16" x 1" Bolt (2)–4
Assembly requires two persons. Set the incline trainer in a cleared area and remove all packing materials. Do
not dispose of the packing materials until assembly is completed. Assembly can be completed using the in-
cluded hex key and your own adjustable wrench .
Note: The underside of the incline trainer walking belt is coated with high-performance lubricant. During shipping,
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a nor-
a
mal condition and does not affect incline trainer performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
shows the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preat-
tached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic
parts, do not use power tools for assembly.
7
1. Place the Uprights (96) near the front of the
Base Frame (75) as shown.
Connect the 80" Wire Harness (46) in the Base
rame (75) to the 55" Wire Harness (48) in the
F
right Upright (96). See the inset drawing. The
connectors should slide easily and snap into
place. If they do not, turn one connector and try
again. IF THE CONNECTORS ARE NOT INSERTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN THE POWER IS
TURNED ON.
1
96
48
46
2. With the help of a second person, align the indicated holes in the Uprights (96) above the holes
in the Base Frame (75), and slide the Uprights
down onto the Base Frame.
pinch the wires. Make sure to keep the holes
aligned.
Tighten four 1/2" x 3 1/4" Bolts (1) with four 1/2"
Star Washers (7) and four 1/2" Jamnuts (5)
(only two of each are shown) into the Uprights
(96) and the Base Frame (75). Start all four
Bolts before tightening any of them.
Be careful not to
75
2
Holes
7
5
75
48
46
96
1
7
1
8
he Wheels (91) may be preattached; if they
3.T
are not, complete this step.
With the help of a second person, carefully raise
he Uprights (96) and insert a Wheel (91) into
t
the bottom of each Upright.
Attach each Wheel (91) with a 3/8" x 2 1/2"
Wheel Bolt (34), a 3/8" Wheel Washer (57), and
a 3/8" Nut (42) (only one side is shown).
overtighten the Nuts; the Wheels must turn
freely.
Do not
3
6
9
2
4
57
34
91
4. The Upright Brackets (98, 99) may be preat-
tached; if they are not, complete this step.
Insert the TV/audio cables through the Left
Upright Bracket (99). Press the Left Upright
Bracket onto the left Upright (96). Be careful
not to pinch the wires.
Insert the 55" Wire Harness (48) through the
Right Upright Bracket (98). Press the Right
Upright Bracket onto the right Upright (96). Be
careful not to pinch the Wire Harness.
Attach the Upright Brackets (98, 99) with four
3/8" x 2" Bolts (3) and four 3/8" Star Washers (9).
4
TV/Audio
Cables
3
99
9
3
96
9
48
98
9
5. Have a second person hold the Handrail (100)
near the Upright Brackets (98, 99). Connect the
V/audio cables in the Handrail to the TV/audio
T
cables in the Left Upright Bracket.
Next, connect the 35" Wire Harness (47) to the
55" Wire Harness (48) in the Right Upright
Bracket (98).
The connectors should slide easily and snap
into place. If they do not, turn one connector
and try again. IF THE CONNECTORS ARE
NOT INSERTED PROPERLY, THE CONSOLE
MAY BE DAMAGED WHEN THE POWER IS
TURNED ON.
See the inset drawing in step 1.
5
TV/Audio
Cables
8
8
2
99
2
100
47
Attach the Handrail (100) to the Upright
Brackets (98, 99) with four 5/16" x 1" Bolts (2)
and four 5/16" Star Washers (8). Start all four
Bolts before tightening any of them. Be careful not to pinch the wires.
6. Make sure that all parts are properly tightened before you use the incline trainer. To protect the floor or
carpet, place a mat beneath the incline trainer.
98
48
2
8
2
10
If you purchased the optional personal television, follow the steps below.
7. Remove the three Accessory Tray Screws (121)
from the Console Cover (105). Discard the
Console Cover.
8. Have a second person hold the TV Console
(138) near the Console Back (49). Connect the
TV cable (A) in the TV Console to the 45" TV
Cable (125) in the Console Back.
Connect the wire harness (B) in the TV Console
(138) to the wire harness (C) in the Console
Back (49).
The connectors should slide easily and snap
into place. If they do not, turn one connector
and try again. IF THE CONNECTORS ARE
NOT INSERTED PROPERLY, THE CONSOLE
MAY BE DAMAGED WHEN THE POWER IS
TURNED ON.
See the inset drawing in step 1.
7
8
121
05
1
121
138
C
A
49
B
125
Attach the TV Console (138) to the Console
Back (49) with the Accessory Tray Screws (121)
that you removed in step 7. Be careful not to
pinch the wires.
1
1
HOW TO MOVE THE INCLINE TRAINER
Before moving the incline trainer, unplug the power
cord.
Due to the size and weight of the incline trainer, moving it requires two or three persons. Hold the metal
frame firmly in the location shown at the right. CAUTION: To decrease the possibility of damage to the
incline trainer or of injury, do not lift the frame by the
plastic front cover or by the handrail. Carefully roll the
incline trainer on the wheels to the desired location and
then lower it to the level position.
the risk of injury, use extreme caution while moving
the incline trainer. Do not attempt to move the incline
trainer over uneven surfaces.
After the incline trainer is placed in the location where it
will be used, make sure that both leveling feet and the
base pads rest firmly on the floor (only one side is
shown). If the incline trainer rocks even slightly, turn one
of the leveling feet clockwise or counterclockwise until
the rocking motion is eliminated.
CAUTION: To reduce
Frame
Wheels
Base
Pads
Leveling
Foot
12
Loading...