Freedom Que ETU Assembly Instruction

Assembly Instructions

Que ETU

Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone Freedom Customer Service (FCS) on 1300 135 588
(Customers outside Australia should contact their closest Freedom store.)

Care Information

Periodically check and re-tighten all fasteners. Wipe down all surfaces using a clean cloth. For Timber Veneer tops, dust weekly
with a clean cloth. Use a Freedom recommended polish every three months. For Hi - Gloss tops, wipe down using a clean cloth.

Assembly Information

The top is affixed to the base using screws. A screwdriver is required to fasten them. Should you not feel comfortable
fastening the top yourself, please contact your nearest Freedom store to arrange assembly at an additional charge.

Hardware

12 x Part A

M8 x 30

Tools

Parts

10 x Part J 4 x Part K 2 x Part L 2 x Part M

10 x Part B

M5 x 65

4 x Part C

M10 x 80

4 x Part D

1 x Part I (Supplied)1 x Part H (Supplied)

M5 x 25

4 x Part E 4 x Part F 4 x Part G

Required: 1 x Phillips Head

Screwdriver

Page 1

4 x Part O

2 x Part P 2 x Part Q

Step 1.

Part K

Assembly Instructions

Que ETU

x 2

Part L

Step 2.

Part K

x 2

Part I

Part A

Page 2

Step 3.

Step 4.

Assembly Instructions

Que ETU

Part P

Part M

Part P

Step 5.

Part I

Part A

Page 3