Freedom Que Dining Table 150-90 Marble1 Assembly Instruction
Assembly Instructions
Que Dining Table 150 x 90cm (Marble Tops)
Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.
Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.
It is recommended that assembly is done on a soft surface like carpet to avoid any damage.
If you experience any problems with your new purchase please phone Freedom Customer Service (FCS) on 1300 135 588
(Customers outside Australia should contact their closest Freedom store.)
Care Information
Periodically check and re-tighten all fasteners. Wipe down all surfaces using a clean cloth. For marble tops, dust weekly
with a clean cloth. Clean spills as quickly as possible. Refer to the care card for more information on care and handling.
Assembly Information
The marble top for this table is heavy and must be lifted with care. It is recommended that at least two people do this. Should you
require your table to be assembled, please contact your nearest Freedom store to arrange assembly at an additional charge.
Hardware
16 x Part A 4 x Part C
Tools
Parts
4 x Part I
10 x Part B
(Not required for Marble Tops)
1 x Part G
(Supplied)
4 x Part J
(Affixed to Part I)
(Affixed to Part I)
1 x Part H
(Supplied)
4 x Part D
2 x Part K
4 x Part E
(Affixed to Part I)
Required: 1 x Phillips Head
Screwdriver
4 x Part L
4 x Part F
Page 1
1 x Part M 2 x Part N
10 x Part O
Step 1.
Part J
Assembly Instructions
Que Dining Table 150 x 90cm (Marble Tops)
x 2
Part K
Step 2.
Part J
x 2
Part H
Part A
Page 2
Loading...