Freedom Posture Slats Assembly Instruction

Assembly Instructions

Baoli Posture Slats

Double / King Single / Queen / King

Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone our Customer Service Hotline [phone] (Customers
outside Australia should contact their closest Freedom store.)

Care Information

Periodically check and re-tighten any fasteners. Wipe down all surfaces weekly with a clean cloth. Do not clean any surfaces with
harsh abrasives or chemicals.

Hardware

Parts

M6*55mm / 8xPart A

M4 / 1xPart F

M6*22mm / 8xPart B

1xPart H

16xPart C

8xPart D

1xPart L

M6*20mm / 8xPart E

Page 1

2xPart M

Assembly Instructions

Baoli Posture Slats

Double / King Single / Queen / King

Step: 1

NOTE: Please measure the height of cleat from floor and find which

one is the closest to your figure. There ‘re 4 style for your option:

H

H

Step: 2

H

H

The hardware for support legs were

already affixed to legs.

Page 2