Freedom Phantom Bookcase 5 Tier Assembly Instruction

Phantom Bookcase 5 Tier

23354692

Thank you for purchasing the Phantom Bookcase 5 Tier. Before you begin to assemble your new piece
of furniture, please check to ensure that all hardware and parts have been supplied. This page lists all
contents included in the carton(s).
Follow instructions closely as deviation from them may present a possible safety risk and may void your
warranty.
It is recommended that assembly is done on a soft surface such as carpet to avoid any damage.
If you experience any problems with your new purchase please phone Freedom Customer Service (FCS)
on 1300 135 588. Customers outside Australia should contact their closest Freedom store.

Care Information

Glass cover:The glass used in this product is known as tempered glass. Although it is up to four times
tougher than regular glass, it is not unbreakable. Tempered glass should be cared for like normal glass.
Clean Glass using a recognised glass cleaning product, avoid any overspray. Careless handling or use
sometimes produces damage which may not be visible to the eye. Damaged glass may spontaneously
shatter if subjected to thermal or mechanical stress. Avoid dropping objects on the glass. Do not allow
hard or pointed objects to come into contact.

Metal cover:Periodically check and re-tighten any fasteners. Avoid direct sunlight. Dust the surface
weekly using a soft cloth. Please note that metal surfaces with everyday use, you must expect some visual
signs of wear on the surface of the product. It is important to remove moist substances immediately.
Remove stains with a soft cloth to avoid marks on the surface.

Hardware (Supplied)

1xPart A

Parts

20xPart B

2xPart C

12xPart H

2xPart D

12xPart E

2xPart I

1xPart F

1xPart G

3xPart J

Page 1 of 3Freedom Customer Service: 1300 135 588www.freedom.com.au

Phantom Bookcase 5 Tier

23354692

NOTE: During the process of axing part H to the frame with part E
from Step 1 thru to Step 7, using hand to attach Part E without
tightening it up.when Step 7 is completed.Tightening up all
Part E with Allen Key (Part A ),ensuring all positioning pins are in
the positioning holes beforehand.

Step 1.

Part E

Part A

Part H

Part G

positioning hole

positioning pin

Part H

Part E

Part F

Step 2.

Step 3.

Page 2 of 3Freedom Customer Service: 1300 135 588www.freedom.com.au