Freedom Palam Table and Bench Assembly Instruction

Assembly Instructions

Palam Tables and Benches

Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone Freedom Customer Service (FCS) on 1300 135 588
(Customers outside Australia should contact their closest Freedom store.)

Care Information:

Periodically check and re-tighten all fasteners. Wipe down all surfaces weekly using a clean cloth. Use table runners and
coasters to help protect the surface. Avoid placing hot items directly such as coffee mugs on the surface. Avoid direct sunlight
as this will cause the colour to change. If the product is in direct sunlight, move items such as vases around to avoid spotting.
Use only Freedom recommended polishes and waxes every 3 - 6 months. Avoid polishes with high amounts of silicone and
petroleum distillate.

Hardware

8 x Part A 8 x Part B 1 x Part C

Parts

1

3

2

4

Page 1

4 x Part D 1 x Part E

Step 1 of 3.

Assembly Instructions

Match up the number on Part D
(Leg) with the one printed on the

!

Corner of Part E (Table Top)

Palam Tables and Benches

Part D

1

1

Part E

2

2

Part D

Step 2 of 3. Step 3 of 3.

Part D

4

4

3

3

Part D

Page 2

Part B

Part A

Part D

Part C

Do not overtighten bolts

!