Freedom Outline Wall Mirror Assembly Instruction

Assembly Instructions

Outline Wall Mirror

Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone our Customer Service Hotline [phone] (Customers
outside Australia should contact their closest Freedom store.)

Care Information

Periodically check and re-tighten any fasteners. Wipe down all surfaces weekly with a clean cloth. Do not clean any surfaces with
harsh abrasives or chemicals.

Hardware

Parts

Back

Page 1

Step: 1

Assembly Instructions

Outline Wall Mirror

Drill a hole on the wall

Back of mirror

Finished:

Option 1

Option 2

Note: There are 2 option for you to choose to match your furniture.

---"IMPORTANT:

1. Wall fixing are not supplied. Please secure the unit to your wall using the appropriate

fixings for your wall type, these are readily available from your local DIY / home

improvement stores.

2. Before drilling your wall check for pipes or electric cables.

3. If you are in doubt, consult a qualified person.

Page 2