Freedom Oslo Storage Unit Assembly Instruction
OSLO
MULTI STORAGE UNIT
(O-MST)
Before you begin to assemble your new piece of furniture please check to ensure all parts and fittings have been supplied. Follow all
instructions closely as deviation from them may void warranty and present possible safety risk. It is recommended that assembly is done on a
soft surface, like carpet, to avoid damage. CARE INSTRUCTIONS: Periodically re-tighten all fasteners. TOOLS REQUIRED: Allen key (provided),
screwdriver, hammer. Some packs may come with timber of a different colour to the model purchased. These pieces are for packing purposes
only.
If you experience any problems with your new purchase please phone our Customer Service staff on (FREE CALL PHONE / FAX) 1800 029 715
Please keep last page of the instruction for warranty information.
CLEANING AND MAINTENANCE: Do not use solvent or alcohol based cleaners on this unit. To clean unit, we recommend using a
warm damp cloth to wipe over surfaces.
PARTS CHECKLIST
J
I
FITTINGS CHECKLIST
CODE PART QTY SIZE
A TOP 1 866 x 427
B RIGHT SIDE 1 1240 x 434
C MID TOP 1 866 x 385
A
B
C
D
H
E
F
G
K
L
Q
M
O
P
R
N
S
N
D FIX SHELF 1 425 x 379
E ADJUSTABLE SHELF 1 423 x 340
F DOOR 1 702 x 419
G B ASE 1 866 x 385
H PARTITION 1 708 x 383
I LEFT SIDE 1 1240 x 434
J BACK PANEL 2 753 x 445
K LGE DWR SIDE (RIGHT) 1 336 x 240
L LGE DWR BACK 1 475 x 240
M LGE DWR SIDE (LEFT) 1 336 x 240
N DWR BASE 2 328 x 387
O LFE DWR FRONT 1 340 x 419
P SML DWR SIDE (LEFT) 1 336 x 120
Q S ML DWR BACK 1 475 x 120
R SML DWR SIDE (RIGHT) 1 336 x 120
S SML DWR FRONT 1 419 x 168.5
CODE DESCRIPTION FITTING QTY CODE DESCRIPTION FITTING QTY CODE DESCRIPTION FITTING QTY
50-001 WOODEN DOWEL 26 50-112 DOOR STOP 1 50-301 DWR BA SE S UPPORT 2
50-007 SHELF SUPPORT 4 50-122 HINGE BLOCK 2 50-490 LAG SCREW 2
50-008 CONFIRMAT 2 50-125 HINGE INSET 2 51-005 350mm RUNNER SET 2
50-009 ALLEN KEY 4mm 1 50-136 MICROFIC CAM 12mm 4 51-183 NAIL ON GLIDE 2
50-010 EURO SCREW 8 50-140 CAM COVER 2/2 51-225 80mm FOOT 3
50-011 SCREW (CSK) 6g x 1/2" 8 50-152 WEDGE (SNAP OFF) 2 51-500 WAVE HANDLE 3
50-015 MINIFIX CAM 15mm 7 50-167 SCREW M4 x 22mm 6 64-004 PLASTIC FILE PROFILE 2
50-016 METAL DOWEL 11 50-221 STUD BOLT 1 80-001 GLUE BOTTLE 2
50-026 NAILS (PACKETS) 1 50-228 METAL INSERT 1
50-043 HI-LO SCREW 8 50-229 ALLEN KEY (8mm) 1
CODE: O-MST MADE IN AUSTRALIA BY KD CONCEPTS
PAGE 1 OF 6
STEP 1: PREPARE FEET FITTINGS
50-490
x 2
51-225
x 2
STEP 2: PREPARE RIGHT SIDE
50-016
x 3
51-183
x 1
50-122
x 2
x 2
B
ARROW TO
FRONT
FOOT FROM
STEP 1
STEP 3: PREPARE LEFT SIDE
50-016
x 3
51-183
x 1
50-010
x 4
POSITION OF SCREWS AND HOLES FOR RUNNER FIXING
LEFT RUNNER SHOWN
STEP 4: PREPARE PARTITION
50-001
x 2
50-015
x 1
50-010
x 4
I
FOOT FROM
STEP 1
TURN OVER
H
CODE: O-MST MADE IN AUSTRALIA BY KD CONCEPTS
H
PAGE 2 OF 6
Loading...