Franke FRI604B1 User Manual

You’re about to begin a very happy and delicious

relationship. Let’s get started.

This is no ordinary Appliance.

Welcome to your new

Franke Cooktop

FRI604B1 - 60CM INDUCTION COOKTOP

2

AN IMPORTANT NOTE

Please read this document and the safety information carefully before you first use

your cooktop.

SUPPORT

Speak to our customer service representatives.

Australia: 03 9700 9100 | [e-mail]

New Zealand: 09 964 0400 | [e-mail]

WARRANTY

Your Franke product is protected by a 2-year warranty. Should you ever need to make a

warranty enquiry, simply contact our service department.

Australia: 03 9700 9100 | [e-mail]

New Zealand: 09 964 0400 | [e-mail]

GET SOCIAL

Keep up to date on all things Franke by following us on Facebook and Instagram.

@FrankeAUS

#makeitwonderful

“Let’s let everyone else be ordinary,

while we make it wonderful”

Contents 3

Chapter 1: Ready, set up, go

5 Introducing your new Franke cooktop

6 Cooking advices

7 First time use

7 Installation instructions

10 Warnings and safety

10 Appliance use warnings

10 Intended function

10 Environmental information

10 Disposal

Chapter 2: Life with your Franke Cooktop

12 Induction principle

12 Using the controls

12 Setting a timer

12 Operating your cooktop

12 Child lock

Chapter 3: Getting the most out of your Franke Cooktop

14 Cleaning and care

14 Various cooking power cells

14 Ventilation system

14 Precautions not to damage the appliance

Chapter 4: Problem, meet solution

16 Trouble shooting

Chapter 5: Last, but not least

18 Warnings, hazards, risks and legal

Looking for something?

19 Glossary

CONTENTS

Chapter 1 Ready, set up, go

4

READY, SET UP, GO

CHAPTER 1

Your Franke cooktop is designed to be set up

quickly and easily - so you can start creating delicious

masterpieces even sooner.

5Introducing: Your new Franke cooktop

INTRODUCING: YOUR NEW FRANKE COOKTOP

DISPLAY

ICON

FUNCTION EXPLANATION

0 Zero

Heating zone is activated, and waiting for power level

1-9 Power level rating

The selection of cooking level power

U Pan detection

No pan or pot is detected, or pan is not suited for
induction cooking

E Error message

There has been a failure, or error in one of the
components. Please read the error section of this
manual to diagnose the error

H Residual heat

The heating zone or surface is still hot, please be
careful not to burn yourself

L Child lock

Control panel is locked

Control light timer

[ - ] key

Selection key

Timer and

Power display

Timer keys

[ + ] key

Power display

On/off key

Chapter 1 Ready, set up, go

6

COOKING ADVICES

PAN QUALITY

Adapted materials: steel, enamelled steel, cast iron, ferromagnetic stainless-steel, aluminium with

ferromagnetic bottom.

Not adapted materials: aluminium and stainless-steel without ferromagnetic bottom, cupper, brass,

glass, ceramic, porcelain.

The manufacturers specify if their products are compatible induction.

To check if pans are compatibles:

• Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This water must
heat in a few seconds.

• A magnet stucks on the bottom of the pan.

Certain pans can make noise when they are placed on an induction cooking zone. This noise doesn’t
mean any failure on the appliance and doesn’t influence the cooking operating.

PAN DIMENSIONS

The cooking zones are, until a certain limit, automatically adapted to the diameter of the pan.
However the bottom of this pan must have a minimum of diameter according to the corresponding
cooking zone.

To obtain the best efficiency of your hob, please place the pan well in the centre of the cooking zone.