Franke FFPD100 SERIES Installation Manual

FFPD100 SERIES

Swivelling spout faucet with spray head

Installation guide

2

ENGLISH

PARTS LIST

G 1561.XX Handle

G R0171.XX Ring cap

G 01156 Cartridge

G R0338031

Fastening set (rubber washer, triangular ange, metal washer, nut)

G R0593 Valve-holder

G 01735 Supply exible hose

G 01648 Flexible hose
G 28734.XX Spray head
G 01431.XX Aerator

G 01646 Headvalve
G 01418.XX Knob

TECHNICAL FEATURES

Maximum water ow 2.2 gpm - 60 psi
Recommended pressure range 15-75 psi - Over 75 psi PRV required
Complies with Proposition 65, NSF61, UPC and C-UPC requirements

TECHNICAL DATA

· Minimum working pressure 0,5 bar

· Maximum working pressure 5 bar

· Recommended working pressure 3 bar (in case of water pressure
higher than 5 bar it is recommended to install pressure reducers)

· Maximum working temperature 70°C

G 01735

G 01648

G 28734.XX

G 01561.XX

G R0171.XX

G 01156

G R0338031

G R0593

G 01431.XX

G 01418.XX

G 01646

3

ENGLISH

Faucet installation

Please remove all components from package and inspect prior to
installation (see itemized table and picture).

NOTE:

Call us immediately if you see inconsistencies. (1-800-626-5771)

or visit

www.frankeksd.com

TABLE OF CONTENTS

1 Faucet

2 Wall fastening set

3 Wall ange (over the sink)

4 Wall ange (under the sink)

5 Fastening set (rubber washer, triangular ange, metal washer, nut)

6 Non-return valves

3

1

2

4

5

6