Foxconn T77H543 User Manual



Lenovo Yoga 3 14

User Guide



Read the safety notices and important tips in the included manuals before using your computer.

• Before using the product, be sure to read Lenovo Safety and General

Information Guide first.

• Some instructions in this guide may assume that you are using

Windows

8.1. If you are using another Windows operating system, some operations may be slightly different. If you are using other operating systems, some operations may not apply to you.

• The features described in this guide are common to most models. Some

features may not be available on your computer or your computer may include features that are not described in this user guide.

• The illustrations in this manual may differ from the actual product.

Please refer to the actual product.

• For details, refer to Guides & Manuals at http://support.lenovo.com

Notes

Regulatory Notice

First Edition (December 2014) © Copyright Lenovo 2014.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.

Contents

Chapter 1. Getting to know your computer ......................................... 1

Top view ..................................................................................................................... 1

Left-side view ............................................................................................................ 8

Right-side view ........................................................................................................ 11

Bottom view ............................................................................................................. 14

Chapter 2. Starting to use Windows 8.1 ............................................ 15

Configuring the operating system for the

first time .................................................................................................................... 15

Operating system interfaces .................................................................................. 15

The charms ............................................................................................................... 16

Putting the computer to sleep or shutting

it down ...................................................................................................................... 19

Touch screen operation .......................................................................................... 22

Connecting to a wireless network ........................................................................ 26

Help and support .................................................................................................... 27

Chapter 3. Lenovo OneKey Recovery system .................................. 28

Chapter 4. Troubleshooting ................................................................ 30

Frequently asked questions ................................................................................... 30

Troubleshooting ...................................................................................................... 33

Trademarks ...........................................................................................36

Chapter 1. Getting to know your computer

Top view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Note: The dashed areas indicate parts that are not visible externally.

 Attention:

• When closing the display panel, be careful not to leave pens or any other objects in between

the display panel and the keyboard. Otherwise, the display panel may be damaged.

Chapter 1. Getting to know your computer

a Integrated

Use the camera for video communication.

camera (on select models)

b Multi-touch

screen

c Windows button

d Built-in

microphones

e Wireless LAN

antennas

f Touch pad

Note: You can enable/disable the touch pad by pressing F6 ().

The LCD display with LED backlight provides brilliant visual output. Multi-touch function is available on this display.

Press this button to: Toggle between the current view and the Start screen.

-or-

Wake up the computer from sleep mode.

Capture sound which can be used for video conferencing, voice narration, or audio recording.

Connect to a wireless LAN adapter to send and receive wireless radio signals.

The touch pad functions as a conventional mouse.

Touch pad: To move the pointer on the screen, slide your fingertip over the pad in the direction in which you want the pointer to move. Touch pad buttons: The functions of the left/right side correspond to those of the left/right mouse button on a conventional mouse.

Chapter 1. Getting to know your computer

 Using the keyboard

Hotkeys

You can access certain system settings quickly by pressing the appropriate hotkeys.

Mutes/unmutes the

sound.

Decreases the volume

level.

Increases the volume level.

Closes the currently active

window.

Refreshes the desktop or the currently active

window.

Enables/disables the touch

pad.

Note: If you changed the Hotkey Mode from Enabled to Disabled in the BIOS setup utility,

you will need to press the Fn key in combination with the appropriate hotkey.

Enables/disables Airplane

mode.

Displays all currently

active apps.

Turns on/off the backlight

of the LCD screen.

Toggles the display between the computer and

an external device.

Decreases display

brightness.

Increases display

brightness.

Chapter 1. Getting to know your computer

Function key combinations

Through the use of the function keys, you can change operational features instantly. To use this function, press and hold Fn a; then press one of the function keys b.

The following describes the features of each function key.

Fn + Esc: Switches to paper display mode.

Fn + Home: Activate the pause function.

Fn + End: Activate the break function.

Fn + PgUp: Enable/Disable the scroll lock.

Fn + PgDn: Activate the insert function.

Fn + Space (on select models):

Turn on/off the keyboard backlight.

Chapter 1. Getting to know your computer

 Positioning the display panel

The display panel can be opened to any angle up to 360 degrees.

Notebook Mode

Suitable for tasks that require a keyboard and mouse (such as creating documents, writing e-mails, and so on).

Chapter 1. Getting to know your computer

Stand Mode (Theater Mode)

Suitable for tasks that require little or no touch (such as viewing photos or playing videos).

Tablet Mode

Suitable for tasks that require touching the screen often (such as surfing the Web, playing games, and so on).

Chapter 1. Getting to know your computer

Tent Mode (Presentation Mode)

Suitable for tasks that require limited interaction with the touch screen (such as displaying graphs or PowerPoint presentations).

 Attention:

• Do not open the display with too much force, otherwise the panel or hinges may be

damaged.

Note: The keyboard and touch pad are automatically locked when the screen is opened

beyond 190 degrees (approximately).

Chapter 1. Getting to know your computer

Notes:

a b c d

Left-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

a AC power adapter

Connects to the AC power adapter.

jack

b USB 3.0 port

Note: If the battery charge is more than 20%, the USB port with a mark supports charging

of an external USB device, even when the computer is turned off.

Combo audio

Connects to USB devices.

Connects to headsets.

jack

• The combo audio jack does not support conventional microphones.

• The recording function may not be supported if third-party headphones or headsets are

connected, due to different industry standards.

d Memory card slot

Note: For details, see “Using memory cards (not supplied)” on page 10.

Insert memory cards (not supplied) here.

Chapter 1. Getting to know your computer

 Connecting USB devices

You can connect a USB device to your computer by inserting its USB plug (Type A) into the USB port on your computer.

The first time you plug a USB device into a particular USB port on your computer, Windows automatically installs a driver for that device. After the driver has been installed, you can disconnect and reconnect the device without performing any additional steps.

Note: Typically, Windows detects a new device after it has been connected, and then installs

the driver automatically. However, some devices may require you to install the driver before connecting. Check the documentation provided by the device’s manufacturer before connecting the device.

Before disconnecting a USB storage device, make sure your computer has finished transferring data to that device. Click the Safely Remove Hardware and Eject Media icon in the Windows notification area to remove the device before disconnecting.

Note: If your USB device uses a power cord, connect the device to a power source before

connecting it. Otherwise, the device may not be recognized.

+ 30 hidden pages