FOXCONN SZ901PWB User Manual
1
7
2
3
1
2
3
Do not remove the battery while the Netbook is still running. This may damage the
data on the hard disk.
C
A
U
T
I
O
N
!
Removing the Battery
Step 1: Shut down the Netbook. Disconnect all cables and devices.
Step 2: Turn the Netbook over and unlock the battery by pushing the Battery Lock
outwards.
Step 3: Push the Battery Latch outwards and hold it in place with your nger. Now use
the other hand to pull the battery out.
1
8
2. Connecting the Power Supply
Step 1: Insert the round end of the power supply transformer into the charging port on
the left side of the Netbook.
Step 2: Insert the other end of the power supply transformer into a power socket.
The power connector for the power socket may vary depending on the local national
standards. The appropriate connector will be bundled with your Netbook. Please
always use the adapter when connecting the power supply. The connector shown
here may not match the type included in the box and is provided for reference
purposes only.
C
A
U
T
I
O
N
!
3. Startup
Step 1: Open the screen of your Netbook.
1
9
Step 2: Turn on the machine by pressing the Power Button.
Power Button
4. Emergency Shutdown
When the Netbook cannot be shut down through normal means, please press and hold
the Power Button until the Netbook powers off.
1
10
1-3 Using the Touchpad
1. Introduction to the Touchpad
The touchpad is like a computer mouse. It senses the pressure from the user's nger
and generates a voltage that is used to control the cursor's movements and issue
commands.
The touchpad senses nger movements. Simply move one nger across the touchpad
to control the movement of the cursor on screen. Below the touchpad is two buttons.
The left button is like the left mouse button and is used for selecting options or launching
programs on screen. The right button works the same way as the right mouse button.
2. Single Tap/ Single Click
To select a window function or press a button icon, move your nger across the touchpad
to move the cursor to the window or button to select. Now tap the touchpad with your
nger to perform the action. This action is equivalent to pressing the left mouse button.
You can also press the left touchpad button for the same effect.
3. Double Tap/ Double Click
To open a le or document, move your nger across the touchpad to move the cursor to
the le you wish to open. Now quickly tap the touchpad twice with your nger to perform
the action. This action is equivalent to pressing the left mouse button twice. You can also
press the left touchpad button twice for the same effect.
4. Drag
Move your nger across the touchpad to move the cursor to the object you wish to drag.
Now hold down the left touchpad button with one hand and move the cursor to the desired
location. Release the button and complete the drag operation. You can also double tap
the object you wish to drag and keep the nger on the touchpad after the second tap to
perform the drag operation with one hand.
Touchpad
Left Button Right Button
This chapter introduces the following information for you:
■ Overview
■ Using Web Camera
■ Special Function Keys
■ MMC/SD/MS Dummy Card
■ Using WWAN
■ Using Wireless LAN
2
12
2-1 Overview
After turning on the Netbook, when you log in Netbook's pre-loaded FoxOS system, the
following screen will appear:
2-2 Using web camera
Click "Play"->"Webcam" to open the web camera, you can take photo and record through
the camera. About detailed information please refer to help page.
Click "Setting" to open the
page to optimize the system.
Click "Help" to open the page, please
refer to the content of the page about
detailed description of the system.
From left to right is in turn:
a. Show Desktop icon b. Bluetooth icon(optional)
c. iBus Input Method icon d. Network Connection status icon
e. Power icon f. Volume icon
g. Exit icon h. Time icon
The four parts
provide various
applications to
meet the needs of
your work, life and
entertainment,
detailed refer to
help page.
You can click these icons to go to
the corresponding utilities.
Loading...