Foxconn K8S760MG series User Manual
This manual is the intellectual property of FOXCONN, Inc. Although the
information in this manual may be changed or modified at any time,
FOXCONN does not obligate itself to inform the user of these changes.
Statement:
All trademarks are the property of their respective owners.
User’s Manual V1.0 in English for K8S760MG series motherboard.
P/N: 91-181-WFT-10-10
Symbol description:
Note: refers to important information that can help you to use motherboard
better.
Attention: indicates that it may damage hardware or cause data loss,
and tells you how to avoid such problems.
Warning: means that a potential risk of property damage or physical
injury exists.
More information:
If you want more information about our products, please visit FOXCONN
website:
www.foxconnchannel.com
V ersion:
Trademark:
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ＰＲＥＦＡＣＥ．ｐ６５ 2004-9-14, 8:451
Item Checklist:
Thank for your purchasing WinFast’s K8S760MG series motherboard. Please
check the package; if there are missing or damaged items, contact your distributor as soon as possible.
K8S760MG series motherboard (x1)
WinFast Utility CD (x1)
User’s Manual (x1)
SATA RAID user’s manual (x1)
IDE Ribbon cable (x1)
FDD Ribbon cable (x1)
I/O Shield (x1)
SPDIF Cable (x1) (optional)
USB 2.0 Cable (x1) (optional)
S-ATA Signal Cable (x1)
S-ATA Power Cable (x1)
SiS 964 RAID Installation Support Disk
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ＰＲＥＦＡＣＥ．ｐ６５ 2004-9-14, 8:452
Declaration of conformity
HON HAI PRECISION INDUSTRY COMPANY L TD
66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,
T AIPEI HSIEN, TAIWAN, R.O.C.
declares that the product
Motherboard
K8S760MG
is in conformity with
(reference to the specification under which conformity is declared in
accordance with 89/336 EEC-EMC Directive)
EN 55022/A1: 2000 Limits and methods of measurements of radio disturbance
characteristics of information technology equipment
EN 61000-3-2/A14:2000 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits for harmonic current emissions
(equipment input current <= 16A per phase)
EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits of voltage fluctuations and flicker in low-voltage
supply systems for equipment with rated current <= 16A
EN 55024/A1:2001 Information technology equipment-Immunity characteristics limits
and methods of measurement
Signature : Place / Date : TAIPEI/2004
Printed Name : James Liang Position/ Title : Assistant President
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ＰＲＥＦＡＣＥ．ｐ６５ 2004-9-14, 8:453
Declaration of conformity
Supplementary Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions : (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Tested to comply with FCC standards.
Signature : Date : 2004
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ＰＲＥＦＡＣＥ．ｐ６５ 2004-9-14, 8:454
Product Introduction
Main Features .............................................................................................. 2
Motherboard Layout .................................................................................... 4
Installation Instructions
CPU.............................................................................................................. 9
Memory ...................................................................................................... 12
Power Supply ............................................................................................ 15
Rear Panel Connectors .............................................................................. 16
Other Connectors ...................................................................................... 18
Expansion Slots ......................................................................................... 27
Jumpers..................................................................................................... 30
BIOS Description
Enter BIOS Setup ....................................................................................... 35
Main menu ................................................................................................. 35
Standard CMOS Features .......................................................................... 37
BIOS Features ........................................................................................... 40
Advanced BIOS Features .......................................................................... 41
Advanced Chipset Features ...................................................................... 44
Integrated Peripherals ................................................................................ 49
Power Management Setup ......................................................................... 54
PnP/PCI Configurations............................................................................... 58
PC Health Status ........................................................................................ 59
Frequency/Voltage Control......................................................................... 60
Load Fail-Safe Defaults ............................................................................. 61
Load Optimized Defaults ............................................................................ 61
Set Supervisor/User Password ................................................................. 61
Save & Exit Setup ...................................................................................... 62
Exit Without Saving .................................................................................... 62
Table of Contents
Chapter
Chapter
Chapter
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ＰＲＥＦＡＣＥ．ｐ６５ 2004-9-14, 8:455
Driver CD Introduction
Utility CD content........................................................................................
Start to install drivers .................................................................................
66
Install USB 2.0 Driver ................................................................................. 68
Using 4-/6-Channel Audio .......................................................................... 68
Install LAN Driver ....................................................................................... 75
....................................................................................... 76
76
Install Norton Internet Security 2004 .......................................................... 77
Directions for Bundled Software
SuperStep ................................................................................................. 79
SuperLogo ................................................................................................. 82
SuperUpdate.............................................................................................. 84
Special BIOS Functions
SuperSpeed............................................................................................... 90
SuperBoot ................................................................................................. 91
SuperBIOS-Protect .................................................................................... 92
SuperRecovery ......................................................................................... 93
Table of Contents
Chapter
Chapter
Chapter
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ＰＲＥＦＡＣＥ．ｐ６５ 2004-9-14, 8:456
1. Attach the CPU and heatsink using silica gel to ensure full contact.
2. It is suggested to select high-quality, certified fans in order to avoid
damage to the motherboard and CPU due to high temperature.
3. Never turn on the machine if the CPU fan is not properly installed.
4. Ensure that the DC power supply is turned off before inserting or
removing expansion cards or other peripherals, especially when
you insert or remove a memory module. Failure to switch off the DC
power supply may result in serious damage to your system or
memory module.
Warning:
We cannot guarantee that your system will operate normally while
over-clocked. Normal operation depends on the over-clock capacity of
your device.
Warning:
Attention:
Since BIOS programs are upgraded from time to time, the BIOS
description in this manual is just for reference. We do not guarantee
that the content of this manual will remain consistent with the actual
BIOS version at any given time in the future.
Attention:
The pictures of objects used in this manual are just for your reference.
Please refer to the physical motherboard.
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ＰＲＥＦＡＣＥ．ｐ６５ 2004-9-14, 8:457
Chapter
Thank you for buying WinFast’s K8S760MG series
motherboard. This series of motherboard is one of our new
products, and offers superior performance, reliability and
quality, at a reasonable price. This motherboard adopts the
advanced SiS 760 + SiS 964 chipset, providing users a computer platform with a high integration-compatibility-performance price ratio.
This chapter includes the following information:
Main Features
Motherboard Layout
1
1
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:401
Chapter 1 Product Introduction
2
Main Features
Size
ATX form factor of 9.6” x 9.1”
Microprocessor
Supports AMD
Athlon 64 Processor
Supports Hyper Transport
TM
Technology with 8/8 links
Supports Hyper Transport
TM
Technology up to 1600MT/s bandwidth
Chipset
SiS Chipset: SiS 760 (North Bridge) + SiS 964 (South Bridge)
System Memory
Two 184-pin DDR DIMM slots
Supports PC3200/2700/2100 memory
Supports 128/256/512 Mb technology up to 2 GB
USB 2.0 Ports
Supports hot-plug
Eight USB 2.0 ports (four rear panel ports, two onboard USB headers
providing four extra ports)
Supports wake-up from S1 and S3 mode
Supports USB 2.0 protocol up to 480 Mbps transmission rate
Onboard Serial ATA
150 MBps transfer rate
Supports two S-ATA devices, such as HDD, etc
Supports RAID 0, RAID 1 and JBOD
Onboard 1394 (optional)
Supports hot-plug
With rate of transmission at 400 Mbps
Self-configured addressing
Supports two independent 1394 units synchronously at most, such as HDD,
CD-ROM
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:402
3
Chapter 1 Product Introduction
Onboard LAN
Supports 10/100 Mbps Ethernet
LAN interface built-in on board
Onboard Audio
AC’ 97 2.3 Specification Compliant
Supports SPDIF output
Onboard Line-in jack, Microphone-in jack, Line-out jack
Supports 5.1 channels audio (setting via software)
Onboard Graphics
AGP 8X Support
Universal AGP v3.5 Compliant
Supports AGP 8X/4X Interface Fast Write Transaction
BIOS
Licensed advanced AWARD (Phoenix) BIOS, supports flash ROM, Plug-and-
Play
Supports IDE, CD-ROM, SCSI HDD or USB device boot up
Green Function
Supports ACPI (Advanced Configuration and Power Interface)
Supports S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4
(suspend to disk-depends on OS), and S5 (soft-off)
Expansion Slots
3 PCI slots
1 AGP slot
Advanced Features
PCI 2.3 Specification Compliant
Supports Windows 98/2000/ME/XP soft-off
Supports Wake-up On LAN functions
Supports PC Health function
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:403
Chapter 1 Product Introduction
4
Motherboard Layout
4
5
6
910
11
12
1
2
3
13
7
8
14
15
16
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:404
5
Chapter 1 Product Introduction
LAN PHY
The RTL8201BL is a single-port PHY ceiver with an MII (Media Independent
Interface). It supports 10/100 Mbps data transfer rate.
Flash ROM
This 4 Mb firmware contains the programmable BIOS program.
The IT8705F controller Super I/O provides supports including floppy, serial
ports, and parallel port to rest of platform through the SiS 760 and SiS 964 via
the Low Pin Count (LPC) interface.
DDR DIMM slots
These two 184-pin DIMM slots support up to 2 GB system memory using
unbuffered non-ECC PC3200/2700/2100 DDR DIMMs.
CPU socket
A 754-pin surface mount, Zero Insertion Force (ZIF) Socket for the AMD
Athlon 64 Processor, supports Hyper Transport
TM
technology with 8/8 links,
up to 1600MT/s bandwidth.
North Bridge controller
The SiS 760, a Hyper Transport
TM
to AGP/MuTIOL Bridge with Ultra256
GPU, integrates a high performance Hyper TransportTM interface for AMD
AthlonTM 64 processor family, AGP interface, Ultra 256 GPU, local frame
buffer interface and SiS MuTIOL technology, which connects with SiS 964
MuTIOLTM Media IO.
This 20-pin connector connects to an ATX power supply. The power supply
must have at least 1 A on the +5 V standby lead (+5VSB).
ATX 12 V connector
This power connector connects the 4-pin 12 V plug from the ATX 12 V power
supply.
1
3
4
5
6
7
2
8
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:405
Chapter 1 Product Introduction
6
9
10
11
12
13
14
Floppy disk connector
This connector accommodates the provided ribbon cable for the floppy disk
drive. One side of the connector is slotted to prevent incorrect insertion of
the floppy disk cable.
IDE connectors
These Dual-Channel bus master IDE connectors support Ultra DMA 133/
100/66. Both the primary (blue) and secondary (white) connectors are slotted
to prevent incorrect insertion of the IDE ribbon cable.
Serial A TA connectors
These two 7-pin connectors accommodate the thin cables for Serial ATA
devices.
South Bridge controller
Referred to as the SiS
964 MuTIOL Media I/O, this controller integrates the
audio controller with AC’97 interface, Ethernet MAC, Universal Serial Bus
Host controller, S-ATA interface, IDE Master/Slave controllers and the
MuTIOL connect to PCI bridge.
1394 controller (optional)
VT6307 is the controller for IEEE1394a on motherboard. The VT6307 is a
complete small package single chip PCI solution at 400Mbps, low power
seamless plug and play connections to the latest IEEE 1394 enabled
devices.
AGP slot
This Accelerated Graphics Port (AGP) slot supports 1.5V AGP 8X mode
graphics cards for 3D graphical applications.
PCI slots
These three 32-bit PCI 2.3 expansion slots support bus master PCI cards
like SCSI or LAN cards with 133MB/s maximum throughput.
Audio CODEC
The ALC655 is an AC’97 CODEC that allows 6-Channel audio playback. The
audio CODEC provides six DAC channels for 5.1 surround sound, SPDIF
output and Line-in stereo inputs, integrated headphone amplifier, greater
than 90dB dynamic range with the jack sense and jack enumeration feature.
15
16
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:406
7
Chapter 1 Product Introduction
This chapter introduces the hardware installation process,
including the installation of the CPU and memory. It also
addresses the connection of your power supply, usage of
the rear panel connectors, connection of hard drive and floppy
drive data cables, and setting up various other feature of the
motherboard. Caution should be exercised during the installation process. Please refer to the motherboard layout
prior to any installation and read the contents in this chapter
carefully.
This chapter includes the following information:
CPU
Memory
Power Supply
Rear Panel Connectors
Other Connectors
Expansion Slots
Jumpers
Chapter
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:407
8
Chapter 2 Installation Instructions
K8S760MG Series User Manual
Take note of the following precautions before you install components
or change settings.
1. Use a grounded wrist strap or touch a safely grounded object,
such as an attached power supply, before handling components
to avoid damaging them due to static electricity.
2. Unplug the power cord before opening your chassis or touching
any components.
3. Hold components by their edges to avoid touching any exposed
integrated circuits (ICs).
4. Whenever you uninstall a component, place it on a grounded
anti-static pad or into the anti-static bag that it came in.
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:408
9
Chapter 2 Installation Instructions
This motherboard supports AMD Athlon64 processors with a 1600 MT/s bandwidth and Hyper Thansport
TM
Technology.
1. Unlock the socket by pressing the lever sideways, then lift it up to a 90
o
angle.
2. Align the cut edge to the gap in the
base of the socket. Carefully insert
the CPU into the socket until it fits in
place.
When the CPU is in place, press it
firmly on the socket while you push
down the socket lever to secure the
CPU. The lever clicks on the side tab
indicates that it is locked.
Gap in the base
Installation of CPU
Follow these steps to install the CPU.
Push down the socket
lever to secure the CPU.
Cut edge
Attention:
The CPU pins must be properly aligned with the holes in the
socket, otherwise the CPU may be damaged.
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:409
10
Chapter 2 Installation Instructions
K8S760MG Series User Manual
2.If required, apply a light coating of
silica gel to the top of the CPU.
NOTE: The CPU heatsink may have
a pre-applied thermal compound. In
that case, the silica gel is not required.
4. Connect the fan’s power cable
to the appropriate 3-pin terminal
on the motherboard.
1. Locate the CPU retention mechanism base (surrounds the CPU
socket).
3. Attach the fan to the base.
Installation of CPU Fan
New technology allows processors to run at higher and higher frequencies.
To avoid problems arising from high-speed operation, for example,
overheating, you need to install the proper fan. The following procedure is
provided for reference only, please refer to your CPU fan user guide for the
actual procedure.
Warning:
Excessive temperature will severely damage the CPU and
system. Therefore, make sure that the cooling fan works normally at all times in order to prevent overheating and damaging
to the CPU.
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:4010
11
Chapter 2 Installation Instructions
CPU Qualified Vendor List
The following table lists the CPUs that have been tested and qualified for use
with this motherboard.
Package
754 Pin Lidded Oµ PGA
754 Pin Lidded Oµ PGA
754 Pin Lidded Oµ PGA
754 Pin Lidded Oµ PGA
754 Pin Lidded Oµ PGA
754 Pin Lidded Oµ PGA
754 Pin Lidded Oµ PGA
Cache Size
512 KB
512 KB
1 MB
512 KB
1 MB
512 KB
1 MB
Frequency
1800 MHz
2000 MHz
2000 MHz
2200 MHz
2200 MHz
2400 MHz
2400 MHz
Model Number
2800+
3000+
3200+
3200+
3400+
3400+
3700+
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:4011
12
Chapter 2 Installation Instructions
K8S760MG Series User Manual
Memory
This motherboard includes two 184-pin slots with 266/333/400 MHz Single
Channel DDR DRAM interface, You must install at least one memory module to
ensure normal operation. If you install two modules, they must be the same
speed. Mixing memory modules from different manufactures are not
recommended.
DIMM1
DIMM2
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:4012
13
Chapter 2 Installation Instructions
Vendor Type Size
Infineon PC2100 (DDR266) 256 MB
Samsung PC2100 (DDR266) 256 MB
Kingmax PC2100 (DDR266) 256 MB
Nanya PC2100 (DDR266) 512 MB
Hynix PC2100 (DDR266) 256 MB
Kingston PC2100 (DDR266) 512 MB
RamBo PC2700 (DDR333) 256 MB
Twinmos PC2700 (DDR333) 512 MB
Ramaxel PC2700 (DDR333) 256 MB
Transcend PC2700 (DDR333) 512 MB
Nanya PC2700 (DDR333) 256 MB
Samsung PC2700 (DDR333) 1 GB
Kingmax PC2700 (DDR333) 256 MB
Apacer PC2700 (DDR333) 512 MB
Micron PC2700 (DDR333) 128 MB
A-DATA PC3200 (DDR400) 256 MB
Apacer PC3200 (DDR400) 256 MB
HLX PC3200 (DDR400) 256 MB
V-DATA PC3200 (DDR400) 256 MB
GeiL PC3200 (DDR400) 256 MB
Transcend PC3200 (DDR400) 512 MB
Twinmos PC3200 (DDR400) 512 MB
Kingston PC3200 (DDR400) 512 MB
Memory Qualified Vendor List
The following table lists the memory modules that have been tested and qualified for use with this motherboard.
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:4113
14
Chapter 2 Installation Instructions
K8S760MG Series User Manual
Installation of DDR Memory
1. There is only one gap in the middle of the DIMM slot, and the memory module
can be fixed in one direction only.
2. Align the memory module to the DIMM slot, and insert the module
vertically into the DIMM slot.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
Note:
Be sure to unplug the AC power supply before adding or removing expansion cards or other system peripherals, especially the memory devices, otherwise your motherboard or the
system memory might be seriously damaged.
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:4114
15
Chapter 2 Installation Instructions
Power Supply
This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting
the power supply.
ATX 12V Power Connector: PWR2
The 4 pin ATX 12 V power supply connects to PWR2 and provides power to the
CPU.
ATX Power Connector: PWR1
PWR1 is the ATX power supply connector. Make sure that the power supply
cable and pins are properly aligned with the connector on the motherboard.
Firmly plug the power supply cable into the connector and make sure it is secure.
Attention:
You have to press the power button for more than four seconds if
you change the default Instant-off setting to “Delay 4 Sec” for the
“Soft-Off by Power Button” option in the BIOS Power Management
Setup.
ATX 12V Power Connector
GND
12V
GND
12V
ATX Power Connector
1
11
-12V_SYS
Ground
NC 5V_SYS
Ground
Ground
PS-ON
Ground
10
20
12V_SYS
Ground
Power OK
3D3V_SYS
5V_SB
3D3V_SYS
3D3V_SYS
Ground
Ground
5V_SYS5V_SYS
5V_SYS
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:4115
16
Chapter 2 Installation Instructions
K8S760MG Series User Manual
Rear Panel Connectors
This motherboard provides the following ports as below:
PS/2 Mouse Port
This green 6-pin connector is for a PS/2 mouse.
PS/2 Keyboard Port
This purple 6-pin connector is for a PS/2 keyboard.
Serial Port: COM1
This 9-pin COM1 port is for pointing devices or other serial devices.
VGA Connector
The VGA connector is for output to VGA-compatible device.
Parallel Port: Printer Port
The 25-pin port connects a parallel printer, a scanner, or other devices.
USB Ports
These four Universal Serial Bus (USB) ports are available for connecting USB 2.
0/1.1 devices.
1
2
3
5
4
Serial Port
(COM1)
USB 2.0 Ports
PS/2 Mouse Port
Line-in
Line-out
MIC
1
2
3
6
PS/2 Keyboard Port
9
6
VGA Connector
4
Parallel Port
(Printer Port)
LAN Port
7
1394 Port
(optional)
5
8
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:4116
17
Chapter 2 Installation Instructions
1394 Port (optional)
This digital interface supports electronic devices such as digital cameras,
scanners, and printers.
LAN Port
This port allows connection to a Local Area Network (LAN) through a network
hub.
Audio Port
When using a two-channel sound source, the Line-out jack is used to connect
to speaker or headphone; the Line-in port connects to an external CD player,
tape player or other audio devices. The MIC is used to connect to microphone.
When using a 6-channel sound source, connect the front speaker to the green
audio output; connect the surround sound speaker to the blue audio input;
connect the central speaker/sub woofer to the red MIC input, as being shown in
the following figure:
8
Line-out
Line-in
MIC
7
9
Front Left
Rear Left
Subwoofer
Center
Blue
Green
Red
Front Right
Rear Right
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:4117
18
Chapter 2 Installation Instructions
K8S760MG Series User Manual
Other Connectors
This motherboard includes interfaces for Floppy, IDE HDD, SATA, USB, 1394, IR
module, CPU fan, system fan, and others.
FDD Connector: FLOPPY
This motherboard includes a standard FLOPPY interface, supporting 360 K, 720 K,
1.2 M, 1.44 M, and 2.88 M FDDs.
FDD Connector
1
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:4118
19
Chapter 2 Installation Instructions
HDD Connectors: PIDE & SIDE
These connectors support the provided Ultra DMA133/100/66 IDE hard disk
ribbon cable. Connect the cable’s blue connector to the primary (recommended)
or secondary IDE connector, then connect the gray connector to the Ultra DMA133/
100/66 slave device (hard disk drive) and the black connector to the Ultra DMA133/
100/66 master device. If you install two hard disks, you must configure the
second drive as a slave device by setting its jumper accordingly. Refer to the
hard disk documentation for the jumper settings.
Attention:
Ribbon cables are directional, therefore, be sure to always connect
with the cable on the same side as pin 1 of the PIDE/SIDE or
FLOPPY connector on the motherboard.
PIDE
SIDE
1
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:4119
20
Chapter 2 Installation Instructions
K8S760MG Series User Manual
Front Panel Connector: FP1
This motherboard includes one connector for connecting the front panel switch
and LED indicator.
Hard Disk LED Connector (HD-LED)
The connector connects to the case’s IDE indicator LED indicating the activity
status of hard disks.
Reset Switch (RESET-SW)
Attach the connector to the Reset switch on the front panel of the case; the
system will restart when the switch is pressed.
Power LED Connector (PWR-LED)
Attach the connector to the power LED on the front panel of the case. The Power
LED indicates the system’s status. When the system is in S0 status, the LED is
on. When the system is in S1 status, the LED is blink. When the system is in S3,
S4, S5 status, the LED is off.
Power Switch Connector (PWR-SW)
Attach the connector to the power button on the front panel of the case. Pushing
this switch allows the system to be turned on and off rather than using the
power supply button.
NC
HD-LED
RESET-SW
PWR-LED
PWR-SW
+ -
+ -
9 10
1 2
FPFP1!
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:4120
21
Chapter 2 Installation Instructions
IrDA Header: IR
The IrDA infrared transmission allows your computer to send and receive data
via an infrared ray. The relevant parameters for the BIOS Integrated Peripherals
should be set prior to using this function.
USB Header: F_USB 1, F_USB 2
Besides four USB ports on the rear panel, the series of motherboard also have
two 10-pin headers on board which may connect to front panel USB cable
(optional) to provide additional four USB ports.
F_USB 1
F_USB 2
D4-
VCC
D5+
D5-
Empty
GND
NC
VCC
GND
D4+
1
2
9
10
D6-
VCC
D7+
D7-
Empty
GND
NC
VCC
GND
D6+
1
2
9
10
+5V
GND
IRRXIRTX
Empty
IR
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:4121
22
Chapter 2 Installation Instructions
K8S760MG Series User Manual
Fan Connectors: CPU_FAN, F AN1
There are two fan headers on this motherboard. These fans will be automatically turned off after the system enters suspend mode.
Audio Connectors: CD_IN, AUX_IN
CD_IN, AUX_IN is Sony standard CD audio connector. It can be connected to a
CD-ROM drive through a CD audio cable.
CPU_FAN
+12V
SENSE
GND
1
+12V
SENSE
GND
1
CD_IN
GND
CD_L
CD_R
AUX_IN
AUX_L
GND
AUX_R
FAN1
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:4122
23
Chapter 2 Installation Instructions
1394 Header: F_1394 (optional)
The 1394 expansion cable can be connected to either the front (provided that
the front panel of your chassis is equipped with the appropriate interface) or
rear panel of the chassis.
Wake-up On LAN: WOL
Through the Wake-Up On LAN function, a wake event occurring from the network can wake up the system. To utilize this function, please be sure to use an
A TX 12 V power supply with a 5VSB line capable of delivering a current of at least
1 A, and a LAN adapter which supports this function. Then connect the header to
the relevant connector on the LAN adapter, set “MACPME Power Up Control” to
“Enabled” in the “Power Management Setup” section of the CMOS SETUP. Save
and exit, then boot the operating system once to make sure this function takes
effect.
WOL
Signal for waking up
+5VSB
GND
1
F_1394
Empty
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:4123
Loading...