Foxconn Cinema Premium User Manual

Cinema Series Motherboard

User’s Manual

Statement:

This manual is the intellectual property of Foxconn, Inc. Although the information

in this manual may be changed or modied at any time, Foxconn does not obligate

itself to inform the user of these changes.

Trademark:

All trademarks are the property of their respective owners.

Version:

User’s Manual V1.0 for Cinema Series motherboard.

P/N: 3A221M700-000-G

Symbol description:

Caution : refers to important information that can help you to use motherboard

better, and tells you how to avoid problems.

Warning : indicating a potential risk of hardware damage or physical injury

may exist.

WEEE:

The use of this symbol indicates that this product may not be treated as household

waste. By ensuring this product is disposed of correctly, you will help prevent potential

negative consequences for the environment and human health, which could other-

wise be caused by inappropriate waste handling of this product. For more detailed

information about recycling of this product, please contact your local city ofce, your

household waste disposal service or the shop where you purchased this product.

More information:

If you want more information about our products, please visit Foxconn’s

website: http://www.foxconnchannel.com

C

A

U

T

I

O

N

!

All trade names are registered trademarks of respective manufacturers listed.

All images are for reference only, please refer to the physical motherboard for specic features.

W

A

R

N

I

N

G

!

Declaration of conformity

HON HAI PRECISION INDUSTRY COMPANY LTD

66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,

TAIPEI HSIEN, TAIWAN, R.O.C.

declares that the product

Motherboard Cinema Premium/Cinema Deluxe

is in conformity with

(reference to the specication under which conformity is declared in

accordance with 89/336 EEC-EMC Directive)

■ EN 55022:1998/A2: 2003 Limits and methods of measurements of radio

disturbance characteristics of information technology equipment

■ EN 61000-3-2/:2000 Electromagnetic compatibility (EMC)

Part 3: Limits Section 2: Limits for harmonic current emissions (equipment input current <= 16A per phase)

■ EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)

Part 3: Limits

Section 2: Limits of voltage uctuations and icker in low

voltage supply systems for equipment with rated current <= 16A

■ EN 55024/A2:2003 Information technology equipment-Immunity

characteristics limits and methods of measurement

Signature : Place / Date : TAIPEI/2009

Printed Name : James Liang

Declaration of conformity

Trade Name: FOXCONN

Model Name:

Cinema Premium/Cinema Deluxe

Responsible Party: PCE Industry Inc.

Address: 458 E. Lambert Rd.

Fullerton, CA 92835

Telephone: 714-738-8868

Facsimile: 714-738-8838

Equipment Classication: FCC Class B Subassembly

Type of Product: Motherboard

Manufacturer: HON HAI PRECISION INDUSTRY

COMPANY LTD

Address: 66 , CHUNG SHAN RD., TU-CHENG

INDUSTRIAL DISTRICT, TAIPEI HSIEN,

TAIWAN, R.O.C.

Supplementary Information:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions : (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Tested to comply with FCC standards.

Signature : Date : 2009

Installation Precautions

Please carefully read the following procedures to install your computer :

■ It is suggested to select high-quality, certied fans in order to avoid damage

to the motherboard and CPU due to high temperature. Never turn on the

computer if the CPU fan is not properly installed.

■ We cannot guarantee that your system can operate normally when your

CPU is overclocked. Normal operation depends on the overclocking capac-

ity of your device.

■ If there is any, when connecting USB, audio, RS232 COM, IrDA or S/PDIF

cables to the internal connectors on the motherboard, make sure their

pinouts are matching with the connectors on the motherboard. Incorrect con-

nections might damage the motherboard.

■ When handling the motherboard, avoid touching any metal leads or connec-

tors.

■ If there is a PCI Express x16 graphics card installed in your system, we

recommend using a 24-pin ATX power supply to get the best performance.

■ Before turning on the power, please make sure the power supply AC input

voltage setting has been congured to the local standard.

■ To prevent damage to the motherboard, do not allow screws to come in contact

with the motherboard circuit or its components. Also, make sure there are no

leftover screws or metal components placed on the motherboard or within the

computer casing.

■ If you are uncertain about any installation steps or have a problem related to

the use of the product, please consult a certied computer technician.

C

A

U

T

I

O

N

!

■ Electrostatic discharge (ESD) is the sudden and momentary electric current

that ows between two objects at different electrical potentials. Normally it

comes out as a spark which will quickly damage your electronic equipment.

Please wear an electrostatic discharge (ESD) wrist strap when handling

components such as a motherboard, CPU or memory.

■ Ensure that the DC power supply is turned off before installing or removing

CPU, memory, expansion cards or other peripherals. It is recommended to

unplug the AC power cord from the power supply outlet. Failure to unplug

the power supply cord may result in serious damage to your system.

W

A

R

N

I

N

G

!

TABLE OF CONTENTS

Chapter 1 Product Introduction

Product Specications ..............................................................................2

Layout.......................................................................................................4

Back Panel Connectors ............................................................................5

Chapter 2 Hardware Install

Install the CPU and CPU Cooler ..............................................................8

Install the Memory ..................................................................................10

Install an Expansion Card ......................................................................12

Install other Internal Connectors ............................................................13

Jumpers ..................................................................................................17

Chapter 3 BIOS Setup

Enter BIOS Setup ...................................................................................19

Main Menu..............................................................................................19

System Information ................................................................................21

Boot Setting Conguration .....................................................................24

Advanced Chipset Features ...................................................................26

Integrated Peripherals ............................................................................30

Power Management ..............................................................................33

Hardware Monitor ...................................................................................35

Overclock Control Center .......................................................................36

BIOS Security Features ..........................................................................47

Load Optimal Defaults ............................................................................48

Save & Exit Setup ..................................................................................48

Exit without Saving .................................................................................48

Chapter 4 CD Instruction

Utility CD Introduction.............................................................................50

FOX ONE

Main Page ........................................................................................53

CPU Control .....................................................................................57

Frequency Control ............................................................................59

Limit Setting......................................................................................60

Voltage Control .................................................................................62

Fan Control.......................................................................................63

FOX LiveUpdate

Local Update ....................................................................................64

Online Update ..................................................................................66

Congure .........................................................................................69

About & Help ....................................................................................71

FOX LOGO .............................................................................................72

FOX DMI ................................................................................................73

Chapter 5 RAID Conguration

RAID Conguration Introduction.............................................................76

Option ROM Utility ..................................................................................78

Create a RAID Driver Diskette ...............................................................80

RAID Enable in BIOS .............................................................................82

Select a RAID Array for Use ...................................................................82

Install a New Windows XP .....................................................................95

Setting Up a Non-Bootable RAID Array..................................................99

Appendix - ATI Hybrid CrossFireX™ Technology ......................................105

Technical Support :

Website :

http://www.foxconnchannel.com

Support Website :

http://www.foxconnsupport.com

Worldwide online contact Support :

http://www.foxconnsupport.com/inquiry.aspx

CPU Support List :

http://www.foxconnsupport.com/cpusupportlist.aspx

Memory, VGA Compatibility List :

http://www.foxconnsupport.com/complist.aspx

Support

Thank you for buying Foxconn Cinema Series motherboard.

Foxconn products are engineered to maximize computing power,

providing only what you need for break-through performance.

With advanced overclocking capability and a range of connectivity

features for today multi-media computing requirements, Cinema

Premium/Cinema Deluxe enables you to unleash more power

from your computer.

This chapter includes the following information:

■ Product Specications

■ Layout

■ Back Panel Connectors

1

2

1-1 Product Specications

CPU Support the AMD PhenomII, Phenom, AMD Athlon II, Athlon, AMD Sempron

processor families, AM2/AM2+/AM3 socket processors

HyperTransport Up to 5200MT/s (HT3.0) for AM2+ CPU

Chipset North Bridge: AMD 785G

South Bridge: SB710

Memory 4 x 240-pin DDR2 DIMM sockets

Support up to 16GB of system memory

Dual channel DDR2 1066(oc*)/800/667MHz architecture (oc*: Overclocking)

Integrated Graphics Integrated ATI RadeonTM 4200 HD GPU

SidePort Memory-DDR3 1333 128MB Memory (only for Cinema Deluxe)

Support Full HD HDMI Technology

Support Hybrid CrossFireX

Dual independent displays support with HDMI/DVI and D-Sub

Audio Realtek 8-channel audio chip

High Denition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

Support Jack-Sensing function

LAN Realtek 10/100/1000Mb/s LAN chip

Expansion Slots 1 x PCI Express x16 slot

2 x PCI Express x1 slots

1 x PCI slot

Onboard Serial ATA 4 x SATA connectors

1 x ESATA connector

300MB/s data transfer rate

Support hot plug and NCQ (Native Command Queuing )

USB Support hot plug

Support up to 12 x USB 2.0 ports (6 rear panel ports, 3 onboard USB

headers supporting 6 extra ports)

Support USB 2.0 protocol up to 480Mb/s

Internal Connectors 1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

4 x SATA connectors

1 x ESATA connector

3 x USB 2.0 connectors (supporting 6 x USB devices)

1 x CPU fan header (4-pin)

1 x System fan header (3-pin)

1 x Front panel connector

1 x CD_IN connector

1 x Front Audio connector

1 x 1394a connector(only for Cinema Deluxe)

1 x IrDA connector

1 x Chassis intrusion alarm header (INTR)

1

3

1 x Speaker connector

1 x COM1 connector

1 x HDA_DH connector

Back Panel 1 x PS/2 port

Connectors 1 x Optical S/PDIF_OUT port

1 x VGA port

1 x HDMI port

1 x DVI-D port

6 x USB 2.0 ports

1 x RJ-45 LAN port

1 x 1394a port (only for Cinema Deluxe)

8-channel Audio ports

Hardware Monitor System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

CPU overheating warning

CPU/System fan speed control

PCI Express x1 Support 250MB/s (500MB/s concurrent) bandwidth

Low power consumption and power management features

PCI Express x16 Support 8GB/s (16GB/s concurrent) bandwidth

Low power consumption and power management features

Green Function Support ACPI (Advanced Conguration and Power Interface)

Support S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4

(suspend to disk), and S5 (soft - off)

Bundled Software FOX ONE

FOX LiveUpdate

FOX LOGO

FOX DMI

Operating System Support for Microsoft® Windows® Vista/XP only

Form Factor Micro ATX Form Factor, 9.6 inches x 9.6 inches (24.4cm x 24.4cm)

The chipset driver of this motherboard does not support Windows® 2000.

C

A

U

T

I

O

N

!

1

4

1. 8-pin ATX 12V Power Connector

2. PCI Express x16 Slot

3. PCI Express x1 Slots

4. PCI Slot

5.CD_IN Connector

6. Front Audio Connector

7. SPDIF_OUT Connector

8. HDA_DH Connector (Option)

9. COM1 Connector

10.

1394a Connector(only for Cinema Deluxe)

11. South Bridge: AMD SB710

12. Front USB Connectors

13. Clear CMOS Jumper

14. Front Panel Connector

15. ESATA Connector

16. Chassis Intrusion Alarm Header

17. SATA Connectors

18. System Fan Header

19. 24-pin ATX Power Connector

20. Speaker Connector

21. IrDA Connector

22. DDR2 DIMM Slots

23. North Bridge: AMD 785G

24.CPU Socket

25. CPU_FAN Header

Note : The above motherboard layout is for reference only, please refer to the physical mother-

board for detail.

1-2 Layout

4

6

7

22

3

5

9

12

11

13

20

2

10

19

17

18

1

8

14

24

25

15

16

21

23

1

5

1-3 Back Panel Connectors

1. PS/2 Port

Use the PS/2 port (purple) to connect a PS/2 keyboard or mouse.

2. USB Ports

The USB ports support the USB 2.0/1.1 specication. Use these ports for USB devices such as an USB keyboard/mouse, USB printer, USB ash drive and etc.

3. VGA Port

To connect with external display devices, such as monitor or LCD display.

4. DVI-D Port

The DVI-D port supports DVI-D specication. Connect a monitor that supports DVI-D connection

to this port.

5. HDMI Port

The HDMI (High-Denition Multimedia Interface) provides an all-digital audio/video interface to

transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI audio/video to this port. The HDMI Technology can support a maximum resolution of 1920x1080p, but the actual resolutions supported depend on the monitor being used.

6. Optical S/PDIF Out Port

This port provides digital audio out to an external audio system that supports digital optical audio.

7. 1394a Port (only for Cinema Deluxe)

This port is used to connect a 1394a device.

8. RJ-45 LAN Port

The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate.

USB Ports

LAN PortVGA PortPS/2 Port

1

Audio Ports

Line Out

Microphone

Subwoofer

Rear Speaker

Side Speaker

Line In

8

DVI-D Port

3

94

USB Ports HDMI Port

6

Optical S/PDIF Out Port

7

1394a Port

LAN Type

Left: Active Right: Link

Status Description Status Description

1000M

Off No Link Off No Link

Green

Blinking

Data Activity

Off 10Mb/s Connection

Green 100Mb/s Connection

Orange 1000Mb/s Connection

Link

LED

Active

LED

2

25

1

6

9. Audio Ports

For the denition of each audio port, please refer to the table below :

Port 2-channel 4-channel 5.1-channel 7.1-channel

Blue Line In Line In Line In Line In

Green Line Out Front Speaker Out Front Speaker Out Front Speaker Out

Pink Microphone In Microphone In Microphone In Microphone In

Orange - - Center/Subwoofer Out Center/Subwoofer Out

Black - Rear Speaker Out Rear Speaker Out Rear Speaker Out

Grey - - - Side Speaker Out

This chapter introduces the hardware installation process, including

the installation of the CPU, memory, power supply, slots, pin headers

and the mounting of jumpers. Caution should be exercised during

the installation of these modules. Please refer to the motherboard

layout prior to any installation and read the contents in this chapter

carefully.

This chapter includes the following information :

■ Install the CPU and CPU Cooler

■ Install the Memory

■ Install an Expansion Card

■ Install other Internal Connectors

■ Jumpers

Please visit the following website for more supporting information about your

motherboard.

CPU Support List:

http://www.foxconnsupport.com/cpusupportlist.aspx

Memory, VGA Compatibility List:

http://www.foxconnsupport.com/complist.aspx

2

8

2-1 Install the CPU and CPU Cooler

Install the CPU

Locate the Pin-1 CPU triangle mark and the Pin-1 of the CPU socket.

Pin-1 triangle

marking of CPU

Pin-1 corner of the

CPU socket

1. Release the CPU socket lever.

2. Align Pin-1 of the CPU with the CPU

socket, and gently put the CPU

onto the socket.

Read the following guidelines before you begin to install the CPU :

■ Make sure that the motherboard supports the CPU.

■ Always turn off the computer and unplug the power cord from the power supply before

installing the CPU to prevent hardware damage.

■ Locate the Pin-1 of the CPU. The CPU cannot be inserted if oriented incorrectly.

■ Apply an even and thin layer of thermal grease on the surface of the CPU.

■ Do not turn on the computer if the CPU cooler is not installed, otherwise overheating

and damage of the CPU may occur.

■ Set the CPU host frequency in accordance with the CPU specications. It is not

recommended that the system bus frequency be set beyond hardware specications

since it does not meet the standard requirements for the peripherals. If you want to

set the frequency beyond the standard specications, please do so according to your

hardware specications including the CPU, graphics card, memory, hard drive, etc.

C

A

U

T

I

O

N

!

2

9

3. When CPU is properly seated,

push the CPU socket lever back

to its locked position.

Install the CPU Cooler

Follow the steps below to correctly install the CPU cooler. (The following procedures use Foxconn cooler as the example.)

1. Apply and spread an even thermal

grease on the surface of CPU.

2. Buckle the heatsink rmly at one side of the stand.

3. Buckle the heatsink at another

side, and press the fasten lever

down to tightly seat the cooler.

4. Attach the 3-wire CPU cooler

connector to the CPU fan header

on the motherboard .

Use extreme care when removing the CPU cooler because the thermal grease may adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.

C

A

U

T

I

O

N

!

2

10

2-2 Install the Memory

Dual Channel Memory Conguration

This motherboard provides four DDR2 memory sockets and supports Dual Channel Technology.

When memory is installed, the BIOS will automatically check the memory in your system.

Four DDR2 memory sockets are divided into two channels :

Channel 0 : DIMM1, DIMM3

Channel 1 : DIMM2, DIMM4

The combinations of DIMM modules are :

It is recommended that memory of the same capacity, brand, speed, and chips be

used and please select dual channel rst to achieve optimum performance.

C

A

U

T

I

O

N

!

Read the following guidelines before you begin to install the memory :

■ Make sure that the motherboard supports the memory. It is recommended that memory

of the same capacity, brand, speed, and chips be used.

■ Always turn off the computer and unplug the power cord from the power outlet before

installing the memory to prevent hardware damage.

■ Memory modules have a foolproof design. A memory module can be installed in only

one direction. If you are unable to insert the memory, switch the direction.

C

A

U

T

I

O

N

!

DIMM1 DIMM2 DIMM3 DIMM4

Single Channel DS/SS - - -

Single Channel DS/SS - DS/SS -

Single Channel - DS/SS - -

Single Channel - DS/SS - DS/SS

Dual Channel DS/SS DS/SS - -

Dual Channel - - DS/SS DS/SS

Dual Channel DS/SS DS/SS DS/SS DS/SS

(DS : Dual Side, SS : Single Side, - : No Memory)

2

11

Installing a Memory

If you take a look at front side of memory module, it has asymmetric pin counts on both sides separated

by a notch in the middle, so it can only t in one direction. Follow the steps below to correctly install

your memory modules into the sockets.

Step 1: Spread the clips at both ends of the memory socket. Place the memory module onto the socket, then put

your ngers on top edge of the module, and push it down rmly and seat it vertically into the memory

socket.

Step 2: The clips at both ends of the socket will snap into place when the memory module is securely inserted.

Before installing a memory module, make sure to turn off the computer and unplug the

power cord from the power outlet to prevent damage to the memory module. Be sure

to install DDR2 DIMMs on this motherboard.

C

A

U

T

I

O

N

!

Notch

112-Pin128-Pin

2

12

2-3 Install an Expansion Card

Follow the steps below to correctly install your expansion card in the expansion slot.

1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis

back panel.

2. Align the card with the slot, and press down on the card until it is fully seated in the slot.

3. Make sure the metal contacts on the card are completely inserted into the slot.

4. Secure the card's metal bracket to the chassis back panel with a screw.

5. After installing all expansion cards, replace the chassis cover.

6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for

your expansion card(s).

7. Install the driver provided with the expansion card in your operating system.

Installing and Removing a PCI Express x16 Graphics Card :

• Installing a Graphics Card:

Gently insert the graphics card into the PCI Express x16 slot.

Make sure the graphics card is locked by the latch at the end of

the PCI Express x16 slot.

• Removing the Card:

Push the latch at the end of the PCI Express x16 slot to release the card and then pull the card straight up from the slot.

PCI

PCI Express x1

PCI Express x16

■ Make sure the motherboard supports the expansion card. Carefully read the manual

that came with your expansion card.

■ Always turn off the computer and unplug the power cord from the power outlet before

installing an expansion card to prevent hardware damage.

C

A

U

T

I

O

N

!

2

13

2-4 Install other Internal Connectors

Power Connectors

This motherboard uses an ATX power supply. In order not to damage any device, make sure all the devices have been installed properly before applying the power supply.

24-pin ATX power connector : PWR1

PWR1 is the ATX power supply connector. Make sure that the power supply cable and pins are properly aligned with the connector on the motherboard. Firmly plug the power supply cable into the connector and make sure it is secure.

8-pin ATX 12 V Power Connector : PWR2

The 8-pin ATX 12V power supply connects to PWR2 and provides power to the CPU.

We recommend you using a 24-pin power supply.

If you are using a 20-pin power supply, you need to align the ATX power connector according to the picture.

C

A

U

T

I

O

N

!

20-Pin Power

Pin No. 24

Pin # Denition Pin # Denition

1 3.3V 13 3.3V

2 3.3V 14 -12V

3 GND 15 GND

4 +5V 16 PS_ON(Soft On/Off)

5 GND 17 GND

6 +5V 18 GND

7 GND 19 GND

8 Power Good 20 NC

9 +5V SB(Stand by +5V) 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 3.3V 24 GND

PWR1

24

13

12

1

Pin # Denition Pin # Denition

1 GND 5 +12V

2 GND 6 +12V

3 GND 7 +12V

4 GND 8 +12V

15

48

PWR2

GND

+12V

2

14

Front Panel Connector : FP1

This motherboard includes one connector for connecting the front panel switch and LED Indicators.

Hard Disk LED Connector (HDD-LED)

Connect to the chassis front panel IDE indicator LED. It indicates the active status of the hard disks. This 2-pin connector is directional with +/- sign.

Reset Switch (RESET-SW)

Attach the connector to the Reset switch on the front panel of the case; the system will restart when the switch is pressed.

Power LED Connector (PWR-LED)

Connect to the power LED indicator on the front panel of the chassis. The Power LED indicates the system’s status. When the system is in operation (S0 status), the LED is on. When the system gets into sleep mode (S1) , the LED

is blinking; When the system is in S3/S4 sleep state or power off mode (S5), the LED is off. This 2-pin connector

is directional with +/- sign.

Power Switch Connector (PWR-SW)

Connect to the power button on the front panel of the chassis. Push this switch allows the system to be turned on and off rather than using the power supply button.

Chassis Intrusion Alarm Header : INTR

The connector can be connected to a security switch on the chassis. The system can detect the chassis intrusion through the function of this connector. If eventually the chassis was closed, the system will send a message out.

Speaker Connector : SPEAKER

The speaker connector is used to connect speaker of the chassis.

EMPTY

HDD-LED

RESET-SW

NC

+

-

PWR-SW

+

-

PWR-LED

1

2

10

9

FP1

Connect a 4-pin

power plug

NC

SPKJ

EMPTY

SPEAKER

SPKJ

1 2 3

4

INTR

GND

INTRUDERJ

1

2

We recommend you using an 8-pin ATX 12V power supply. If

you are using a 4-pin power supply, you need to align the ATX

power connector according to the picture on the right.

C

A

U

T

I

O

N

!

2

15

COM Connector : COM1

This motherboard supports one serial RS232 COM port for legacy compatibility. User must purchase another RS232 cable with a 9-pin D-sub connector at one end to connect with the external RS232 device and another end with 10-

pin female connector to connect with COM1 connector in the motherboard.

1394a Connector : F_1394 (only for Cinema Deluxe)

The 1394a expansion cable can be connected to either

the front (provided that the front panel of your chassis is equipped with the appropriate interface) or real panel of

the chassis.

IrDA Connector : IR

This connector supports infrared wireless transmitting and receiving device.

USB Connectors : F_USB1/2/3

In addition to the six USB ports on the rear panel, this product also provides three 10-pin USB headers on its motherboard. By connecting through USB cables with them, user can quickly expand another six USB ports on the front panel.

NC

GND

5V_DUAL

D+

D-

D+

GND

D-

5V_DUAL

EMPTY

1

2

10

9

F_USB 1/2/3

Serial ATA Connectors : SATA_1/2/3/4

The Serial ATA connector is used to connect with SATA Hard Disk or CD devices which supporting this feature. The current Serial ATA II interface allows up to 300MB/s data transfer rate.

1

2

3

4

5

+5V

EMPTY

IRRX

GND

IRTX

IR

RLSD

SOUT

RI

GND

RTS

DSR

DTR

CTS

EMPTY

SIN

1

2

10

9

COM1

GND

+12V

TPA-

TPB-

GND TPB+ +12V

GND

TPA+

EMPTY

1

2

10

9

F_1394

SATA_1/2/3/4

GND

TX+

TX-

GND

RX-

RX+

GND

1

2

16

Audio Connector : F_AUDIO

The audio connector supports HD Audio standard. It provides the Front Audio output choice.

Audio Connector : CD_IN

CD_IN is a Sony standard audio connector, it can be connected to a CD/DVD-ROM drive through a CD/DVD audio cable.

S/PDIF Out Connector : SPDIF_OUT

The connector is used for S/PDIF output.

Fan Headers : CPU_FAN, SYS_FAN,

FAN1, FAN2

There are ve main fan headers on this motherboard.

The fan speed can be controlled and monitored in “PC Health Status” section of the BIOS Setup. These fans can be automatically turned off after the system enters

S3, S4 and S5 sleeping states.

FAN1/2

GND +12V SENSE

1

CPU_FAN

GND POWER SENSE

CONTROL

1

SYS_FAN

GND +12V SENSE

1

CD_IN

CD_L GND CD_R

PORT1_L

PORT1_R

PORT2_L

SENSE_SEND

SENSE1_RETURN

PRESENCE_J

EMPTY SENSE2_RETURN

AUD_GND

1 2

109

F_AUDIO

PORT2_R

SPDIF_OUT

+5V

EMPTY

SPDIF_OUT

GND

1

2

3

4

2

17

2-6 Jumpers

For some features needed, users can change the jumper settings on this motherboard to modify them. This section explains how to use the various functions of this motherboard by changing the jumper settings. Users should read the following content carefully prior to modifying any jumper setting.

Description of Jumpers

1. For any jumper on this motherboard, pin 1 can be identied by the bold silkscreen next to it.

However, in this manual, pin 1 is simply labeled as “1”.

2. The following table explains different types of the jumper settings. "Closed" means placing a jumper

cap on the two pins to temporarily short them. The shorting can also be done by touching two

pins by a screwdriver for a few seconds, but using jumper cap is recommended. It can prevent

hazardous ESD (Electrical Static Discharge) problem.

Clear CMOS Jumper: CLR_CMOS

The motherboard uses CMOS RAM to store the basic hardware information (such as BIOS data,

date, time information, hardware password...etc.). Clear CMOS data is the fast way to go back to

factory default when the BIOS settings were mistakenly modied.

The steps to clear CMOS data are :

1. Turn off the computer, unplug the power cord from the power outlet.

2. Remove jumper cap from pins 2-3, put it onto pins 1-2 to short them. This will clear CMOS

data.

3. Return the setting to its original with pins 2-3 closed.

4. Plug in the power cord to your computer and turn it on.

5. Go to BIOS Setup to congure new system as described in next chapter.

Clear

1

2

3

Normal (Default)

1

2

3

CLR_CMOS

Jumper Diagram Denition Description

1-2 Set Pin 1 and Pin 2 closed

2-3 Set Pin 2 and Pin 3 closed

Closed Set two pins closed

Opened Set two pins opened

1

Since BIOS could be updated some other times, the BIOS information described

in this manual is for reference only. We do not guarantee the content of this

manual will remain consistent with the newly released BIOS at any given time in

the future. Please visit our website for updated manual if it is available.

This chapter tells how to change system settings through the BIOS

Setup menus. Detailed descriptions of the BIOS parameters are

also provided.

You have to run the Setup Program when the following cases oc-

cur:

1. An error message appears on the screen during the system

Power On Self Test (POST) process.

2. You want to change the default CMOS settings.

This chapter includes the following information :

■ Enter BIOS Setup

■ Main Menu

■ System Information

■ Boot Setting Conguration

■ Advanced Chipset Features

■ Integrated Peripherals

■ Power Management

■ Hardware Monitor

■ Overclock Control Center

■ BIOS Security Features

■ Load Optimal Defaults

■ Save & Exit Setup

■ Exit without Saving

3

19

Enter BIOS Setup

The BIOS is the communication bridge between hardware and software, correctly setting up the BIOS parameters is critical to maintain optimal system performance. Power on the computer, when show the post logo, you can press <DEL> key to enter SETUP.

Main Menu

The main menu allows you to select from a list of setup functions together with two exit choices.

Use the arrow keys to select a specic item and press <Enter> to go to the submenu.

Each item in the main menu is explained below:

► System Information

It displays the basic system conguration, such as BIOS ID, CPU Name, memory size plus

system date, and time. They all can be viewed or set up through this menu.

► Boot Setting Conguration

The advanced system features can be set up through this menu. There are boot up settings.

► Advanced Chipset Features

The values for the chipset can be changed through this menu, and the system performance

can be optimized.

► Integrated Peripherals

All onboard peripherals can be set up through this menu. There are SATA devices, Super I/O

devices such as Serial I/O and other USB devices... etc.

► Power Management Setup

All the items related with Green function features can be set up through this menu.

► Overclock Control Center

We do not suggest that you change the default values in the BIOS Setup, and we shall not be responsible for any damage which resulted from the change you made.

C

A

U

T

I

O

N

!

► System Information ► Overclock Control Center

► Boot Setting Conguration ► BIOS Security Features

► Advanced Chipset Features Load Optimal Defaults

► Integrated Peripherals Save & Exit Setup

► Power Management Setup Exit without Saving

► Hardware Monitor

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

Basic CMOS Configuration

► System Information

3

20

Some special proprietary features (such as overclocking) can be set up through this menu.

► Hardware Monitor

This setup enables you to read/change Fan speeds, and displays temperatures and voltages

of your CPU/System.

► BIOS Security Features

The Supervisor/User password can be set up through this menu to prevent unauthorized use

of your computer. If you set a password, the system will ask you to key in correct password

before boot or access to Setup.

► Load Optimal Defaults

The optimal performance settings can be loaded through this menu. However, it may offer bet-

ter performance in some ways (such as less I/O cards, less memory ...etc.), still, it may cause

problem if you have more memory or I/O cards installed. It means, if your system loading is

heavy, set to optimal default may sometimes come out an unstable system. What you need

now is to adjust BIOS setting one by one, trial and error, to nd out the best setting for your

current system.

► Save & Exit Setup

Save setting values to CMOS and exit.

► Exit Without Saving

Do not change anything and exit the setup.

3

21

System Information

This sub-menu is used to set up the standard BIOS features, such as the date, time, oppy drive

and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change

the setting.

► Time (hh:mm:ss)

This item allows you to congure the desired time. Use [ENTER] to enter the setting, then use

[TAB] to move forward a eld. Use [+] or [-] to input the value.

The three elds of the setting are <hour> : <minute> : <second> respectively.

► Date (mm:dd:yy)

<weekday><month><date> <year> format.

Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read

Only).

Month—month from 1 to 12.

Date—date from 1 to 31.

Year—year, set up by users.

Use [ENTER], [TAB] or [SHIFT-TAB] to select a eld. Use [+] or [-] to input the value.

► SATA Port 1 / SATA Port 2 / SATA Port 3 / SATA Port 4 / eSATA Port

When OnChip SATA Type is set to [Native IDE], while entering setup, BIOS automatically

detects the presence of SATA devices.

SATA Port 1 is the lower SATA port of SATA1_SATA2 of the motherboard.

SATA Port 2 is the upper SATA port of SATA1_SATA2 of the motherboard.

SATA Port 3 is the lower SATA port of SATA3_SATA4 of the motherboard.

SATA Port 4 is the upper SATA port of SATA3_SATA4 of the motherboard.

E-SATA Port is on the motherboard.

► Halt On

This category determines whether or not the computer will stop if an error is detected during

powering up.

[All Errors] : All errors can result in system halt.

[All Errors But...] : All errors but keyboard or mouse can result in system halt. The halt condi-

System Information

System Time [11 : 59 : 49] Help Item System Date [Sun 04/26/2009] Use [Enter], [TAB] ► SATA Port 1

[Not Detected] or the a torrow keys to

► SATA Port 2

[Not Detected] select a eld.

► SATA Port 3

[Not Detected]

► SATA Port 4

[Not Detected] Use [+] or [-] to

► eSATA Port

[Not Detected] congure the system

time.

Halt On [All Errors, But ...]

Keyboard [Disabled] Mouse [Disabled]

System Overview

BIOS Information Mainboard Model : Cinema

BIOS ID : 912F1P01

BIOS Build Date :06/01/09

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

12

3

22

tion can be enabled/disabled in the next three settings.

► Keyboard

The system boot will not stop for a keyboard error if you enabled this item.

► Mouse

The system boot will not stop for a mouse error if you enabled this item.

► BIOS Information

It displays the mainboard model of this product, and the current BIOS ID/Build Date/ver-

sion. User can check this information and discuss with the field service people if a BIOS

upgrade is needed.

► Memory Information

This item displays the current memory size/memory tinings/memory clock/tCL/tRCD/tRP/tRAS.

The size is depending on how many memory modules were installed in your system before

powering on.

► tCL (CAS Latency)

The number of memory clocks it takes a DRAM to return data after the read CAS_L is assert-

ed depends on the memory clock frequency. The value that BIOS programs into the memory

controller is a function of the target clock frequency. The target clock frequency is determined

from the supported CAS latencies at given clock frequencies of each DIMM.

► tRCD (RAS-to-CAS Delay)

This item displays the delay time (in clock cycles) between the CAS# and RAS# strobe sig-

nals.

► tRP (Precharge Command Period)

This item displays the row precharge time (in clock cycles).

► tRTP (Internal Read to Precharge Command Delay)

This time displays the delay time (in clock cycles) between read command and precharge

command.

► tRAS (Active-to-Precharge Delay)

This item displays the minimum RAS# active time (in clock cycles).

► Subtimings Information

Press <Enter> to go to relative submenu.

► LAN Information

This item shows the onboard LAN MAC address.

3

23

Subtimings Information

► tRTP (Internal Read to Precharge Command Delay)

This time displays the delay time (in clock cycles) between read command and precharge

command.

► tRC (Active-to-Active/Auto-Refresh Command Period)

This item displays the row cycle time (in clock cycles). tRC = tRAS + tRP.

► tWR (Write Recovery)

This item displays the write recovery time (in clock cycles).

► tRRD (Active-to-Active of a Different Bank)

This item displays the delay time (in clock cycles) between the RAS# and RAS# strobe sig-

nals.

Subtimings Information

tRTP : 3-5 Help Item tRC : 20

tWR : 5

tRRD : 3

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Color F9:Optimized Defaults

3

24

Boot Setting Conguration

► Smart Boot Menu

When PC starts, you can press [F11] key to enter smart boot menu. If [Disabled] is selected,

then pressing [F11] has no function. This also prevents user without password trying to get into

your computer through smart boot menu.

► IDE Detect Time Out

This item is used to select the time out value for detecting ATA/ATAPI devices. If the checking

time is over the set value, the system will skip it.

► MPS Revision

This feature is only applicable to multiprocessor motherboards as it species the version of the

MPS that the motherboard will use. The MPS is a specication by which PC manufacturers

design and build CPU architecture systems with two or more processors. MPS 1.1 was the

original specication. MPS version 1.4 adds extended conguration tables for improved

support of multiple PCI bus congurations and greater expandability in the future. In addition,

MPS 1.4 introduces support for a secondary PCI bus without requiring a PCI bridge. If your

operating system comes with support for MPS 1.4, you should keep the setting as the default

1.4. You also need to enable MPS 1.4 support if you need to make use of the secondary PCI

bus on a motherboard that doesn't come with a PCI bridge. You should only leave it as 1.1

only if you are running an older operating system that only supports MPS 1.1.

► Quiet Boot

This item is used to enable/disable the quiet boot.

[Disabled] : Displays the normal POST messages.

[Enabled] : Displays OEM customer logo instead of POST messages.

► Quick Boot

While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten the

time needed to boot the system.

► Bootup Num-Lock

This item denes if the keyboard Num Lock key is active when your system is started. The

available settings are: On (default) and Off.

► Boot Device Priority

Smart Boot Menu Enabled Help Item

IDE Detect Time Out [35] MPS Revision [1.4] Smart Boot Menu Quiet Boot [Enabled] definition Quick Boot [Enabled] Bootup Num-Lock [ON] ► Boot Device Priority

[Press Enter]

► Hard Disk Drives

[Press Enter]

► Removable Drives

[Press Enter]

► CD/DVD Drives

[Press Enter]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Color F9:Optimized Defaults

[Enabled]

3

25

This option is used to select the priority for boot devices. After pressing <Enter>, you can

select the device using the Up/Down arrow keys, and change the device priority using <+> or

<->; you can exit this menu by pressing <Esc>.

► Hard Disk Drives

This option is used to specify the boot priority sequence from available hard disk drives.

► Removable Drives

This option is used to specify the boot priority sequence from available removable drives.

► CD/DVD Drives

This option is used to specify the boot priority sequence from available CD/DVD drives.

3

26

Advanced Chipset Features

► PCIe Port #2 / 6 / 7 / 9 / 10 / NB-SB Configuration

Press [Enter] to go to its submenu.

► PCIEx16 Slot Clock

This option is used to adjust the speed of PCI Express slot. It may enhance the graphics card

speed.

► Auto Detect PCI/PCIE Clock

This option is used to auto detect PCI/PCIE slots. Setting values are: [Auto], [Disabled]. When

selected [Auto], the system will turn off clock of the empty PCI slot to reduce EMI (Electromag-

netic Interference).

► PCI Latency Timer

This item is used to set the PCI latency timer. The value is in unit of PCI cycle for PCI device

latency timer register. Setting values are 32, 64, 96, 128, 160, 192, 224, 248.

This feature controls how long each PCI device can hold the bus before another takes over.

The larger the value, the longer the PCI device can retain control of the bus. Low values for

the PCI Latency Timer will reduce the effective PCI bandwidth while higher values means

every PCI device will have to wait longer before they can get access to the bus, but when they

do get access, they can conduct their transactions for a longer time. Normally, a default value

of 64 cycles is set. Some PCI devices may not agree with longer latency times so if you start

facing problems like stuttering sound or a less responsive system, reduce the latency. Higher

values will actually reduce performance as too much time may be allocated to each PCI device

to the disadvantage of other devices on the bus.

► Allocate IRQ to PCI VGA

[YES]: Assigns interrupt request (IRQ) to PCI VGA card if the card requests IRQ.

[NO]: Does not assign interrupt request (IRQ) to PCI VGA card even if the card requests an

IRQ.

Advanced Chipset Features

PCI/PCI Express Conguration

Help Item

► PCIe Port #2 Configuration

► PCIe Port #6 Configuration [Press Enter]

► PCIe Port #7 Configuration

[Press Enter]

► PCIe Port #9 Configuration

[Press Enter] ► PCIe Port #10 Configuration [Press Enter] ► NB-SB Port Configuration [Press Enter]

PCIE x16 Slot Clock [100]

Auto Detect PCI/PCIE Clock [Auto] PCI Latency TImer [64] Allocate IRQ to PCI VGA [Yes]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[Press Enter]

3

27

PCIe Port #2 Conguration

► Gen2 High Speed Mode

This item is used to select the Generation II speed mode of PCI Express slots. Select [Auto],

RC will only advertize Generation II capability; Select [Software Initiated], the speed mode is

determined by software initiated; Select [Advertised RC], the speed mode is determined by RC

initiated; Select [Disabled], BIOS will turn off Generation II speed mode of PCI Express slots.

► Link ASPM

This item is used to select the link mode between ASPMs.

► Link Width

This item is used to set the link width between PCI Express slots.

► Slot Power Limit, W

This item is used to adjust the power limit of PCI Express slots. You can use [+]/ [-] to change

the value or directly input a value from 0 to 255.The default option is [75].

PCIe Port #2 Conguration

Gen2 High Speed Mode

Help Item

Link ASPM

[Disabled]

Link Width [Auto] Enable Gen2 speed

Slot Power Limit, W [75] based HW or SW

support

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[Auto]

3

28

PCIe Port #6

► Gen2 High Speed Mode

This item is used to select the Generation II speed mode of PCI Express slots. Select [Auto],

RC will only advertize Generation II capability; Select [Software Initiated], the speed mode is

determined by software initiated; Select [Advertised RC], the speed mode is determined by RC

initiated; Select [Disabled], BIOS will turn off Generation II speed mode of PCI Express slots.

► Link ASPM

This item is used to select the link mode between ASPMs.

PCIe Port #6 Conguration

Gen2 High Speed Mode

Help Item

Link ASPM

[Disabled]

Enabled Gen2 speed based HW or SW support

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[Auto]

The item of the PCIe Port #7 / 9 / 10 is the same of the PCIe #6.

C

A

U

T

I

O

N

!

3

29

NB-SB Port Conguration

► NB-SB Link ASPM

This item is used to select the ASPM link mode between north bridge and sourth bridge.

► NP NB-SB VC1 Traffic Support

This item is used to enable or disable the VC1 data trafc support between north bridge and

sourth bridge.

► Link ASPM

This item is used to select the link mode between ASPMs.

NB-SB Port Conguration

NB-SB Link ASPM

Help Item

NP NB-SB VC1 Traffic Support [Disabled] Link Width [Auto]

Disabled

L1

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[Disabled]

Options

3

30

Integrated Peripherals

► SATA Configuration / USB Configuration

Press <Enter> to go to relative submenu.

► LAN Controller

This item is used to enable or disable the LAN controller.

► LAN Boot ROM

This item is used to enable or disable the LAN boot optional ROM. A LAN boot ROM

lets you set up a diskless workstation on the network. By installing a boot ROM in the network

board, you can enable a client PC system on the network to be booted remotely.

► 1394 FireWire

This item is used to enable or disable the onboard 1394 controller.

► USB Controller

This item is used to enable or disable the USB controller.

► Azalia HD Audio Controller

This item is used to enable or disable the Azalia HD Audio Controller.

► Serial Port Address

This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial

port 1.

► IR Port Address

This item is used to assign the I/O address and interrupt request (IRQ) for the IR port.

► IR Port Mode

This item is used to set the IR mode. The available settings are :

[IrDA] : An IrDA device for maximum 115200 bit/s.

[ASK IR] : A faster IrDA for 1152000 bit/s.

► IR Port Duplex Mode

This item enables you to determine the infrared function of the onboard infrared chip.

Integrated Peripherals

► SATA Conguration

[Press Enter] Help Item

► USB Conguration

[Press Enter]

LAN Controller [Enabled] Congure the SATA LAN Boot ROM [Disabled] device(s). 1394 FireWire [Enabled] USB Controller [Enabled] Azalia HD Audio Controller [Enabled] Serial Port Address [3F8/IRQ4] Ir Port Address [2F8/IRQ3] Ir Port Mode [IrDA] Ir Port Duplex Mode [Half Duplex]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[Press Enter]

3

31

SATA Conguration

► SB710 SATA Controller

This item is used to enable or disable the SB710 SATA controller.

► SB710 SATA Mode

This item is used to set the operating mode of your SATA ports.

Options : [Native IDE]; [RAID]; [AHCI]; [Legacy IDE].

[Native IDE] - This congures the SATA ports to support native IDE mode.

[RAID] - When you enable RAID, it means all your SATA drives must also support AHCI.

[AHCI] - The Advanced Host Controller Interface (AHCI) specication describes the register

level interface for a Host Controller for Serial ATA. The specication includes a description of

the hardware/software interface between system software and the host controller hardware.

AHCI provides more advanced features including SATA features, but some SATA drives may

not support AHCI, unless they are labeled with AHCI support in its specication.

If your motherboard supporting AHCI, and you have a SATA device, which also supports AHCI,

then you can select IDE option to have fair performance (only PATA, SATA level), or you can

select AHCI to get its best performance.

[Legacy IDE] - This congures the SATA ports to support legacy IDE mode which is running

for old Windows system.

SB710 SATA Controller Help Item

SB710 SATA Mode [Native IDE]

Enables or Disables the SB710 SATA Controller

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[Enabled]

3

32

USB Conguration

► Legacy USB Support

This item is used to enable the support for USB devices on legacy OS. If you have a USB

keyboard or mouse, set to auto or enabled.

► USB 2.0 Controller Mode

This item is used to set the transmission rate mode of USB 2.0. The available settings are :

[High Speed] in 480Mbps; [Full Speed] in 12Mbps.

► BIOS EHCI Hand-Off

Windows XP supports a number of features in the Enhanced Host Controller Interface (EHCI)

specication, but there are a few features that are not implemented. Microsoft said preliminary

support for EHCI BIOS handoff will be available in Windows XP SP2.

This item allows you to enable support for OS without EHCI hand-off feature.

This is a workaround for OS without EHCI hand-Off support .

The EHCI ownership change should claim by EHCI driver.

If USB devices are connected to the computer, the following item will appear :

► USB Mass Storage Device Con

After pressing <Enter>, you can set the reset delay for the USB mass storage device. There

are many different emulation types of this USB device, such as oppy, hard disk and CDROM

can be selected.

USB Configuration Help Item

Module Version - 2.24.4-13.4 Enabled support for legacy USB. AUTO USB Device Enabled : disables legacy 1 Keyboard support if no USB devices are connected Legacy USB Support

USB 2.0 Controller Mode [HiSpeed] BIOS EHCI Hand-Off [Enabled]

► USB Mass Storage Device Con

[Press Enter]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[Enabled]

3

33

Power Management Setup

ACPI (Advanced Conguration and Power Interface) is an open industry standard interfaces

enabling OS-directed conguration, power management, and thermal management of mobile,

desktop, and server platforms. It denes ve sleeping states, they are :

S1 - The S1 sleeping state is a low wake latency sleeping state. In this state, no system

context is lost (CPU or chip set) and hardware maintains all system context. (also called

Power On Suspend)

S2 - The S2 sleeping state is a low wake latency sleeping state. This state is similar to the S1

sleeping state except that the CPU and system cache context is lost (the OS is respon-

sible for maintaining the caches and CPU context). Control starts from the processor’s

reset vector after the wake event.

S3 - The S3 sleeping state is a low wake latency sleeping state where all system context

is lost except system memory. CPU, cache, and chip set context are lost in this state.

Hardware maintains memory context and restores some CPU and L2 conguration

context. Control starts from the processor’s reset vector after the wake event. (also called

Suspend to RAM)

S4 - The S4 sleeping state is the lowest power, longest wake latency sleeping state supported

by ACPI. In order to reduce power to a minimum, it is assumed that the hardware plat-

form has powered off all devices. Platform context is maintained. (also called Suspend

to Disk)

S5 - The S5 state is similar to the S4 state except that the OS does not save any context. The

system is in the “soft” off state and requires a complete boot when it wakes. Software

uses a different state value to distinguish between the S5 state and the S4 state to allow

for initial boot operations within the BIOS to distinguish whether or not the boot is going

to wake from a saved memory image.

Power Managemeng Setup

Suspend mode Help Item

Repost Video on S3 Resume [No] PWR on after PWR fail [Power Off] ACPI state used for

Resume by PME [Disabled] system Suspend,

Resume by Onboard LAN [Disabled] S1=basic standby mode Resume by USB Devices [Disabled] S3=advanced standby Resume by PS2 Keyboard [Disabled]

mode

RTC Resume [Disabled] NB Power Managment [Auto]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:change Colors F9:Optimized Defaults

[Auto]

3

34

►Suspend Type

This item is used to set the energy saving mode of the ACPI function. When you select “S1

(POS)” mode, the power is always on and computer can be resumed at any time. When

you select “S3 (STR)” mode, the power will be down after a period of time. The status of the

computer before it entering STR will be saved in memory, and the computer can quickly return

to previous state when the STR function wakes.

► Repost Video on S3 Resume

This item is used to Re-initialize the graphics card when waking up from S3/STR standby

mode.

► PWR On after PWR Fail

This item is used to set which state the PC will take with when it resumes after an AC power

loss.

► Resume by PME

This item is used to enable/disable the PME to generate a wake up.

► Resume by Onboard LAN

This item is used to enable/disable the LAN to generate a wake up.

► Resume by USB Devices

This item is used to enable/disable the USB devices to generate a wake up.

► Resume by PS2 Keyboard

This item is used to enable/disable the PS2 keyboard to generate a wake up.

► RTC Resume

This item is used to enable/disable RTC alarm event to generate a wake up.

RTC is system real time clock.

► NB Power Managment

This item is used to enable/disable dynamic clock gating for IOC/NT/MCN/CFG.

3

35

Hardware Monitor

► Case Intrustion Alert

This item is used to enable or disable a warning message once the case intrusion alert has

been triggered.

► Hardware Monitor

This item is used to enable or disable Hardware Health Monitoring Device.

► CPU/System/NB Temperature

The CPU/System/NB temperature are automatically detected and displayed by the system.

► CPU Fan/System Fan Speed

The CPU fan/System fan speed are automatically detected and displayed by the system.

► CPU VCore/DRAM Voltage/+ 3.3V/+12.0V/NT/SB Voltage/VBAT

The current voltages are automatically detected and displayed by the system.

► Smart Power LED

Smart Power LED is a feature built on your motherboard to indicate different states during

Power On Self Test (POST). The LED is located at the front panel, and it displays POST state

by different long-short blinking intervals. You can always leave this state enabled.

► CPU Smart Fan Function / System Smart Fan Function

[Full On Mode]; [Automatic Mode].

This option is used to enable or disable smart fan function.

Hardware Monitor

Case Intrustion Alert Help Item

Hardware Monitor [Enabled]

CPU Temperature :45 oC/113 oF Enables a warning

System Temperature :40

o

C/104 oF message once the case

North Bridge Temperature :45 oC/113 oF intrusion alert has

CPU Fan Speed :2136 RPM been triggered System Fan Speed :N/A

CPU VCore Voltage :1.200V DRAM Voltage :1.920V +3.30V :3.360V

+12.0V :11.840V

HT/SB Voltage :1.200V VBAT :3.104V

Smart Power LED [Disabled]

CPU Smart Fan Control [Automatic mode]

Fan off Temperature (

o

C) [000]

Fan on Temperature (oC) [035]

Fan on Startup speed (Z) [064] Fan slope (Z) [2]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[Disabled]

System Status Power LED Status Stop Blinking Condition

Normal Always On Always On

No Memory Continue blinking On (1sec.), Off (1sec.) Reboot & Memory OK

No Display Continue blinking On (2sec.), Off (2sec.) Reboot & Display OK

Post Error Message

Continue blinking On (1/2sec.), Off (1/2sec.)

Enter Setup or Skip

No CPU Fan Continue blinking On (1/2sec.), Off (1/2sec.) Reboot & Fan OK

3

36

Overclock Control Center

► Fox Intelligent Stepping/ CPU Configuration/ Memory Configuration/IGP Configuration

Press <Enter> to go to its submenu.

Fox Intelligent Stepping

► CPU Multiplier

This option is used to adjust the CPU Clock Ratio. Multiply CPU clock with this ratio, you can

get the CPU speed. Increase this ratio may overclock your CPU. This option will be valid if your

CPU ratio is unlocked and will be displayed only if your CPU is supporting this feature.

If your CPU is Phenom, the setting values are: [Auto], [Manual].When you select [Manual], you

may set the value of the CPU Multiplier ID/Divider. It also displys the value of the Current Multi-

plier ID(by CPU)/Divider, the Current CPU Speed(by CPU) and the Target CPU Speed.

► Cool ’N’ Quiet (Appears only when CPU supports)

Overclock Control Center

► Fox Intelligent Stepping

[Press Enter] Help Item

► CPU Conguration

[Press Enter]

► Memory Conguration [Press Enter] Configure Fox

► IGP Conguration

[Press Enter] Intelligent Stepping

Function

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[Press Enter]

Fox Intelligent Stepping

AMD CPU Overclocking Conguration Help Item

Multipliers unlocked :Yes Multiplies the

CPU Multipler (FID) [Auto] Reference Clock (FSB) Cool ’n’ Quiet [Enabled]

resulting in the CPU CPU Voltage Offset [Auto] Core Frequency

Current CPU Voltage :1.232 V (Auto) Target CPU Voltage :1.232 V (Auto)

Advanced Clock Calibration [Disabled]

ClockGen Conguration

Reference Clock (FSB) [200] PCIEx16 Slot Clock [100] CPU-NB HT Multiplier [Auto] HT Uplink Width [Auto] HT Downlink Width [Auto] ► Advanced HT Settings

[Press Enter]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[Auto]

3

37

This option helps lowering down the CPU frequency and voltage when system is idling. When

the CPU speed is slowing down, the temperature will drop as well.

► CPU Voltage Offset

This option is used to change the CPU voltage in a step of 25mV. The voltage can be incre-

mented from +25mV to +775mV.

► Reference Clock (FSB)

This clock signal is multiplied to create CPU Core, CPU Uncore, Memory and HyperTransport

Frequencies.

► PCIEx16 Slot Clock

This option is used to adjust the speed of PCI Express slot. It may enhance the graphics card

speed.

► CPU-NB HT Multiplier

HT stands for HyperTransport bus. The CPU<->NB HT Multiplier option controls the physical

speed of the CPU to Northbridge HT link using multipliers ranging 1x to 13x. The physical

speed of the link is determined by multiplying the CPU FSB with the CPU<->NB HT Speed

setting.

► HT Uplink Width / HT DownLink Width

The coherency refers to the caching of memory, and the HT links between processors are co-

herent HT links as the HT protocol includes messages for managing the cache protocol. Other

(non processor-processor) HT links are Non-Coherent HT links, as they do not have memory

cache.

The HyperTransport link width and frequency are initialized between the adjacent coherent

and/or noncoherent HyperTransport technology devices during the reset sequence.

It is highly recommended to set to [Auto] for overall performance.

► Advanced HT Setting

This option is used to congure HyperTransport Function.

► NB VID

This option is used to specify the alternate VID while in low power states.

► NB Voltage Offset

This option is used to change the North Bridge voltage in a step of 30mV. The voltage can be

incremented from +30mV to +360mV.

► HT/SB Voltage Offset

This option is used to change the HyperTransport/South Bridge voltage in a step of 30mV. The

voltage can be incremented from +30mV to +360mV.

► DRAM Voltage Offset

This option is used to change the DRAM voltage in a step of 50mV. The voltage can be incre-

mented from +50mV to +600mV.

3

38

CPU Conguration

This menu shows most of the CPU specications.

► Allow Microcode Updates

It allows the CPUs Microcode to be updated/patched.

► Secure Virtual Machine

This option is used to enable or disable Secure Virtual Machine Mode (SVM) Support.

► Cool ‘N‘ Quiet (Appear only when CPU supports)

This option helps lowering down the CPU frequency and voltage when system is idling. When

the CPU speed is slowing down, the temperature will drop as well.

► Advanced CPU Settings

Press <Enter> to go to its submenu.

► CPU-NB HT Link Control

HT stands for HyperTransport bus. The CPU<->NB HT Link Control option controls the Link of

the CPU to Northbridge HT.

► CPU-NB HT Multiplier

HT stands for HyperTransport bus. The CPU<->NB HT Multiplier option controls the physical

speed of the CPU to Northbridge HT link using multipliers ranging 1x to 13x. The physical

speed of the link is determined by multiplying the CPU FSB with the CPU<->NB HT Speed

setting.

► HT Uplink Width / HT DownLink Width

The coherency refers to the caching of memory, and the HT links between processors are co-

herent HT links as the HT protocol includes messages for managing the cache protocol. Other

(non processor-processor) HT links are Non-Coherent HT links, as they do not have memory

cache.

The HyperTransport link width and frequency are initialized between the adjacent coherent

and/or noncoherent HyperTransport technology devices during the reset sequence.

It is highly recommended to set to [Auto] for overall performance.

CPU Conguration

Help Item

Module Version: 13.53 AGESA Version : 3.5.0.0 Allow the CPUs

Physical Count : 1

Microcode to be

Logical Count : 4 updated/patched

AMD Athlon(tm) 9750 Quad-Core Processor

Revision : B3

L1 Cache: 512KB

L2 Cache: 2048KB

L3 Cache: 2MB HT Speed : 1800MHz, Up/Down Width: 16/16bit

Speed : 2400MHz, NB Clk: 1800MHz

Multipliers unlocked : Yes

uCode Patch Level : 0x1000095

CPU Conguration Control

Allow Microcode Updates

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change colors F9:Optimized Defaults

[Enabled]

3

39

Advanced CPU settings

► GRAT Error Reporting

This option is used to enable for debugging, recommended setting is Disabled.

► ACPI SRAT Table

This option is used to enable the OS to use the ACPI SRAT table.It may increase OS boot times and overall system performance.

► CPU Prefetching

The processor has a CPU prefetcher that automatically analyzes its requirements and

prefetches data and instructions from the main system memory into cache that are likely to be

required in the near future. This reduces the latency associated with memory reads.

When enabled, the processor’s CPU prefetcher will be enabled and allowed to automatically

prefetch data and code for the processor.

When disabled, the processor’s hardware prefetcher will be disabled.

► C1E Support (Appears only when CPU supports)

C1E represents Enhanced HALT State. It is a feature which CPU uses to reduce power

consumption when in halt state. C1E drops the CPU’s multiplier and voltage to lower levels

when a HLT (halt) command is issued. This item is used to enable/disable the C1E support.

Advanced CPU setting

GRAT Error Reporting

Help Item

ACPI SRAT Tabled [Enabled] CPU Prefetching [Enabled] Enable for debugging, C1E Support [Disabled] recommended setting

is Disabled

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[Press Enter]

3

40

Memory Conguration

► Memory Features / ECC Conguration

Press <Enter> to go to its submenu.

► DRAM Clock Mode

This option is used to conguation Memory Frequency,Timings and Subtimings. Setting values

are: [Auto], [Limit],[Manual].

[Auto]: DRAM SPD prole1;

[Limit]: DRAM SPD prole2;

[Manual]: DRAM by Manual.

► DRAM Voltage Offset

This option is used to change the DRAM voltage in a step of 50mV. The voltage can be incre-

mented from +50mV to +600mV.

► DRAM Timing Mode

When both DCTs (DRAM controller) are enabled in unganged mode, BIOS must initialize the

frequency of each DCT in order, you also can congure the timings manually. Settings are : [Auto], [Both].[Both] will appear only in AM2+ CPU.

► tCL (CAS Latency)

The number of memory clocks it takes a DRAM to return data after the read CAS_L is assert-

ed depends on the memory clock frequency. The value that BIOS programs into the memory

controller is a function of the target clock frequency. The target clock frequency is determined

from the supported CAS latencies at given clock frequencies of each DIMM.

► tRCD (RAS-to-CAS Delay)

This item allows you to select a delay time (in clock cycles) between the CAS# and RAS#

strobe signals.

► tRP (Precharge Command Period)

This item allows you to select the row precharge time (in clock cycles).

► tRAS (Active-to-Precharge Delay)

This item allows you to set the minimum RAS# active time (in clock cycles).

► tRTP (Internal Read to Precharge Command Delay)

Internal READ Command to PRECHARGE Command delay

Memory Conguration

► Memory Features

Help Item

► ECC Conguration

[Press Enter]

DRAM Clock Mode [Auto] Adjust the CPUs DRAM Voltage Offset [+100mV] Integrated Memory

Current DRAM Voltage :1.920 V (+100mV) Controller Target DRAM Voltage :1.920 V (+100mV)

DRAM Timing Mode [Auto]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[Press Enter]

3

41

► tRC (Active-to-Active/Auto-Refresh Command Period)

This item allows you to set the row cycle time (in clock cycles). tRC = tRAS + tRP.

► tWR (Write Recovery)

This item allows you to select the write recovery time (in clock cycles).

► tRRD (Active-to-Active of a Different Bank)

This item allows you to select a delay time (in clock cycles) between the RAS# and RAS#

strobe signals.

► tRWTTO (Read-to-Write Turnaround for Data. Optional only if CPU supports)

This timing parameter ensures read-to-write data-bus turnaround.

► tWRRD (Write to Read DIMM Termination Turn-around. Optional only if CPU supports)

This timing parameter accounts for termination timing when a write is followed by a read to a

different DIMM.

► tWTR (Internal Write to Read Command Delay)

This item allows you to select a delay time (in clock cycles) between sending the last data from

a write operation to the memory and issuing a read command.

► tWRWR (Write to Write Timing. Optional only if CPU supports)

This timing parameter accounts for turn-around timing when a write is followed by a write to a

different DIMM.

► tRDRD (Read to Read Timing. Optional only if CPU supports)

This timing parameter accounts for turn-around and termination timing when a read is followed

by a read to a different chip select.

► tRFC0, 1, 2, 3 (Auto-Refresh-to-Active/Auto-Refresh Command Period)

Refresh to Refresh or Refresh to Active command interval.

Trfc3: auto-refresh row cycle time for logical DIMM 3

Trfc2: auto-refresh row cycle time for logical DIMM 2

Trfc1: auto-refresh row cycle time for logical DIMM 1

Trfc0: auto-refresh row cycle time for logical DIMM 0

Memory Features

Help Item

Bank Inter Leaving Sligthly improves

Channel Inter leaving [XOR of Address bit] memory performance Enable Clock to All DIMMs [Disabled] MemCLK Tristate C3/ATLVID [Disabled] Memory Hole Remapping [Enabled] DCT Unganged Mode [Always] Power Down Enable [Enabled] Power Down Mode [Channel] Auto Tweak Performance [Disabled] DRAM Cong_High Control [Auto]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[Auto]

3

42

► Bank Interleaving

Interleaving allows banks of SDRAM to alternate their refresh and access cycles. One bank

will undergo its refresh cycle while another is being accessed. This improves memory perfor-

mance by masking the refresh cycles of each memory bank.

However, bank interleaving only works if the addresses requested consecutively are not in the

same bank.

► Channel Interleaving

Dual channel (Interleaved) mode offers the highest throughput for real world applications. Dual

channel mode is enabled when the installed memory capacities of both DIMM channels are

equal. If different speed DIMMs are used between channels, the slowest memory timing will be

used.

To achieve Dual Channel Interleaving mode, the following conditions must be met:

Matched DIMM conguration in each channel

Same Density (128MB, 256MB, 512MB, etc.)

Matched in both Channel 0 and Channel 1 memory channels

► Enable Clock to All DIMMs

This setting is to control EMI.

When disabled, the system will turn off clock on the empty DIMM slots and to reduce EMI

(Electro-Magnetic Interference).

► MemClk Tristate C3/ALTVID

Enables the DDR memory clocks to be tristated when alternate VID mode is enabled.

► Memory Hole Remapping

This item is used to enable/disable memory remapping around memory hole.

PCI doesn't actually care much which addresses are used, but by convention the PC platform

puts them at the top of the 32-bit address space. For many years it wasn't possible or practical

to put that much RAM into a PC. But now it is, so it's up to the memory controller and host

bridge to gure out what to do. Many systems cause that high RAM to simply be ignored,

resulting in the loss of effective RAM. More complex systems will take the RAM that would

occupy that 3.5-4GB address space and re-map it into the 4.0-4.5 address space. The RAM

doesn't care because it's just an array of storage cells, it's up to the memory controller to as-

sociate addresses with those storage cells.

Of course, that only works if you're using a 64-bit (or 32bit physical address extension (PAE)

enabled) OS that can deal with physical addresses larger than 32 bits.

Once this option is enabled, the BIOS can see 4096MB of memory.

► DCT Unganged Mode

DCT stands for DRAM Controller.

1GB

512MB

1GB

512MB

Channel 0 DIMM1 Channel 1 DIMM2 Channel 0 DIMM3

Channel 1 DIMM4

Channel 0 DIMM1 Channel 1 DIMM2 Channel 0 DIMM3

Channel 1 DIMM4

3

43

Ganged refers to the use of both DRAM controllers within a memory controller acting in con-

cert to access memory. For a description of ganged (128-bit DRAM data width) and unganged

(64-bit DRAM data width) DRAM modes :

Ganged channels (DDR2) :

■ DCT channels A and B can be ganged as a single logical 128-bit DIMM.

■ Offers highest DDR2 bandwidth.

■ Requires both DIMMs in a logical pair to have identical size and timing parameters, both

DCTs programmed identically.

Unganged channels

■ DCT channels A and B operate as two completely independent 64-bit channels (both chan-

nels operate at the same frequency).

■ Reduce DRAM page conicts – more concurrent open dram pages .

■ Better bus efciency.

Burst lengths supported

When both DCTs are enabled in unganged mode, BIOS must initialize the frequency of each

DCT in order.

► Power Down Enable

When power down mode is enabled, if all pages of the DRAMs associated with a CKE pin are

closed, then these parts are placed in power down mode.

► Power Down Mode

For non-mobile systems, power down mode should be set to [Channel] CKE control.

A DIMM or a group of DIMMs enters power down mode by deasserting the corresponding

clock enable signal when the DRAM controller detects that there are no transactions

scheduled to any of the DIMMs connected to the clock enable signal. A DIMM or a group of

DIMMs exits power down mode by asserting the corresponding clock enable signal when a

transaction is scheduled to any DIMM connected to the clock enable signal. There are two

CKE pins per DRAM channel. For each channel :

[Channel] CKE control. The DRAM channel is placed in power down when all chip selects

associated with the channel are idle.

[Chip Select] CKE control. A chip select or pair of chip selects is placed in power down

when no transactions are pending for the chip select(s).

► Auto Tweak Performance

Enables the DDR memory clocks to be tristated when alternate VID mode is enabled.

► DRAM Cong_High Control

This item is used to set the memory conguration. Options are [Auto] and [Manual].

When select [Manual], the following two items will appear.

► DcqBypassMax

The DRAM controller arbiter normally allows transactions to pass other transactions in order to

optimize DRAM bandwidth. This eld species the maximum number of times that the oldest

memory-access request in the DRAM controller queue may be bypassed before the arbiter

decision is overridden and the oldest memory-access request is serviced instead.

► FourActWindow

This item species the rolling tFAW window during which no more than 4 banks in a 8-bank

device are activated, per JEDEC DDR2 specication. For example, if this item is set to 10

clocks and an activate command is issued in clock N, then no more than three further activate

3

44

commands may be issued in clocks N+1 through N+9. To program this eld, BIOS must con-

vert the tFAW parameter into MEMCLK cycles by dividing the highest tFAW (in ns) across all

DIMMs connected to the channel by the lowest period (highest frequency) of MEMCLK (in ns)

over all P-states and rounding up to the next integer.

ECC Conguration

► ECC Mode

This item is used to set the level of the ECC (Error Checking and Correcting) protection. If you

select the ‘Super’ mode, you can dynamically sets the DRAM scrub rate so all of the memory

is scrubbed in 8 hours. When you select the ‘User’, you can enabled or disable the following

items.

► DRAM ECC

It allows hardware to report and correct memory errors automatically maintaining system

integrity.

► DRAM SCRUB REDIRECT

It allows the system to correct DRAM ECC errors immediately, when they occur, even if back-

ground scrubbing is on.

► 4-Bit ECC Mode

It is used to enable or disable 4-BIT ECC Mode.(Note: Also known as CHIPKILL ECC Mode)

► DRAM BG Scrub

This item is used to correct memory errors so later reads are correct. Doing this while memory

is not being used improves performance.(Note: When AMD’s node interleave feature is en-

abled, BIOS will force DRAM scrub off.)

► Data Cache BG Scrub

It allows the L1 Data Cache ram to be corrected while idle.

► L2 Cache BG Scrub

It allows the L2 Data Cache ram to be corrected while idle.

► L3 Cache BG Scrub

It allows the L3 Data Cache ram to be corrected while idle.

ECC Conguration

Help Item

ECC Mode Set the level of ECC DRAM ECC [Disabled] protection. Note:The DRAM SCRUB REDIRECT [Disabled]

‘Super’ ECC mode

4-Bit ECC Mode [Disabled]

dynamically sets the

DRAM BG Scrub [Disabled]

DRAM scrub rate so

Data Cache BG Scrub [Disabled] all of memory is L2 Cache BG Scrub [Disabled] scrubbed in 8 hours. L3 Cache BG Scrub [Disabled]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[Disabled]

3

45

IGP Conguration

► IGP Mode

It allows you to determine whether to allocate memory for the integrated graphics controller

from the system memory or SidePort memory.

Options: [Disabled], [UMA], [UMA+SIDEPORT].

[Disabled]- Disables the integrated graphics controller.

[UMA]-In UMA mode, the only memory to which the integrated graphics has access is a

dynamically allocated partition of system memory. The size of the parition is selectable from

within the BIOS.

[UMA+SIDEPORT]-The SidePort is a 32-bit DDR memory interface that the integrated graph-

ics can use either instead of or alongside the Athlon 64’s memory controller. In this mode, the

integrated graphics cores will request data from both the UMA space and SidePort memory.

► UMA Frame Buffer Size

Allocates system memory for use as video memory to ensure the most efcient use of

available resources for maximum 2D/3D graphics performance.

This is a memory allocation method addition to the Unied Memory Architecture (UMA)

concept, wherein a static amount of page-locked graphics memory is allocated during driver

initialization. This xed amount of memory will provide the user with a guaranteed graphics

memory at all times, and will no longer be available to the OS.

► SIDEPORT Clock Speed

This item will appear only when "IGP Mode" is set to [UMA+SIDEPORT], it used to adjust

sideport clock speed.

► UMA-SP Interleave Mode

This item will appear only when "Internal Graphics Mode" is set to [UMA+SIDEPORT], it used

to set the UMA and sideport interleave mode. Setting values are: [Auto], [Coarse], [Fine]. The

interleave Ratio/Size selected based on system conguration.

► IGP Core Clickspeed

This item is used to enable or disable the IGP Core Clickspeed.

► GPU Clock

It allows you to change the clock rate of graphics engine.

IGP Conguration

IGP Mode

Help Item

UMA Frame Buffer Size [Auto] SIDEPORT memory clock [667MHz] UMA-SP Interleave Mode [Auto] IGP Core Clickspeed [Enable] I Disable GPU Clock [500] UMA NB Core Voltage Offset [Auto] SIDEPORT Surround View [Auto] UMA+SIDEPORT HDMI Audio [Enable] Primary Video Controller [PCI-GFXO-IGFX] PCIEx16 Slot Clock [100]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[UMA+SIDEPORT]

Options

3

46

► NB Core Voltage Offset

This option is used to change the North Bridge voltage in a step of 30mV. The voltage can be

incremented from +30mV to +360mV.

► Surround View

SurroundView is the ATI technology that provides multi-graphics controller display capability

for both the ATI PCIe-based graphics card and the ATI integrated graphics processor (IGP).

Enabling SurroundView does not impact display modes (resolution and color depth) or perfor-

mance. The display mode of each output is controlled independently by the graphics controller

connected to it.

1. When using a non-ATI PCI Express (PCIe) graphics card, SurroundView is not supported.

The integrated graphics processor (IGP) is automatically disabled, and the system memory

allocated to the IGP is freed for other use.

2. When installing an ATI PCIe graphics card, SurroundView is disabled by default. Enabling

SurroundView in the BIOS enables the integrated UMA graphics controller, which in turn

makes available up to two additional graphics outputs. When enabling the integrated UMA

graphics controller, system memory will be reallocated.

► HDMI Audio

This item is used to enable or disable the audio operation of your High Denition Multimedia

Interface.

► Primary Video Controller

This item allows you to select the priority of boot sequence from different display devices. Set-

ting values are: [GFX0-IGFX-PCI], [PCI-GFX0-IGFX], [IGFX-GFX0-PCI]. (GFX0-PCI Express

x16 graphics card; IGFX-onboard VGA; PCI-PCI graphics card.)

► PCIEx16 Slot Clock

This option is used to adjust the speed of PCI Express slot. It may enhance the graphics card

speed.

3

47

BIOS Security Features

► Change Supervisor Password

This item is used to install or change supervisor password.

After you input Supervisor password, it then will ask you to

input user password optionally.

► Change User Password

This item is used to install or change user password.

BIOS Security Features

Supervisor Password : Not Installed

Help Item

User Password : Not Installed

Install or change the Change Supervisor Password

[Press Enter] password.

Change User Password

[Press Enter]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[Press Enter]

Enter New Password :

3

48

Load Optimal Defaults

Optimal defaults are the best settings of this motherboard. Always load the Optimal defaults after updating the BIOS or after clearing the CMOS values. Select this option and press Enter, it will pop out a dialogue box to let you load the defaults. Select <OK> and then press <Enter> to load the defaults. Select <Cancel> and press <Enter>, it will not load. By this default, BIOS have set the optimal performance parameters of system to improve the performances of system components. But if the optimal performance parameters to be set cannot be supported by your hardware devices (for example, too many expansion cards were installed), the system might fail to work.

Save Changes and Exit

When you select this option and press <Enter>, a message will be displayed in the center of the screen:

Select [OK] to save your changes to CMOS and exit the program, select [Cancel] or <ESC> to return to the main menu.

Discard Changes and Exit

If you select this option and press <Enter>, the following message will be displayed in the center of the screen:

Select [OK] to exit CMOS without saving your modications, select [Cancel] or <ESC> to return to the main menu.

Save configuration changes and exit setup?

[OK] [Cancel]

[OK]

Discard changes and exit setup?

[OK] [Cancel]

[OK]

Load Optimal Defaults?

[OK] [Cancel]

[OK]

The utility CD that came with the motherboard contains useful

software and several utility drivers that enhance the mother-

board features.

This chapter includes the following information:

■ Utility CD Introduction

■ FOX ONE

■ FOX LiveUpdate

■ FOX LOGO

■ FOX DMI

Note : Because each module is independent, so the section

number will be reorganized and unique to each module, please

understand.

4

50

Utility CD introduction

This motherboard comes with one Utility CD. To begin with, simply insert the CD into your CD drive. The CD will automatically run and display the main menu on the screen.

1. Driver

Select "Driver", then use these options to install all the necessary drivers for your motherboard.

You need to restart your computer after nishing all the installations of drivers.

AMD chipset Driver

Use it to install AMD chipset driver.

Realtek HDA Audio Driver

Use it to install Realtek Audio driver.

Realtek 811X LAN Driver

Use it to install Realtek 811X LAN driver.

AMD Raid Driver

Use it to install AMD RAID driver.

ATI HDMI Audio Driver

Use it to install ATI HDMI Audio driver.

4

51

2. Utility

Use these options to install additional software programs.

FOX ONE

The FOX ONE allows you to monitor various temperature values, voltage values, frequencies and fan speeds at any time. See “FOX ONE” for details.

Fox LiveUpdate

The Fox LiveUpdate allows you to backup or update the system BIOS, drivers and utilities in Windows® environment. See “Fox LiveUpdate” for details.

FOX LOGO

The FOX LOGO is a simple and useful utility to backup, change and delete the boot time Logo. See “FOX LOGO” for details.

FOX DMI

The FOX DMI is a full Desktop Management Interface viewer, and it provides three DMI data formats. See “FOX DMI” for details.

Microsoft DirectX 9.0

Use it to install Microsoft DirectX 9.0.

Adobe Acrobat Reader

Installs Adobe® Acrobat® Reader that is used for viewing and printing the PDF document.

Norton Internet Security

Installs Norton® Internet Security to protect your PC from being affected by viruses.

AMD RAID Utility

Use it to install AMD RAID uitlity.

3. Foxconn WebSite

Click it to visit Foxconn’s website.

4. Browse CD

Click it to browse the CD content.

4

52

FOX ONE

FOX ONE is a powerful utility for easily modifying system settings. It also allows users

to monitor various temperature values, voltage values, frequencies and fan speeds at

any time.

With FOX ONE, you can :

■ Modify system performance settings, such as the CPU and memory bus speeds,

CPU voltages, fan speeds, and other system performance options.

■ Monitor hardware temperatures, voltages, frequencies and fan speeds.

Supporting Operating Systems :

■ Windows XP (32-bit and 64-bit) ■ Windows Vista (32-bit and 64-bit)

Using FOX ONE :

The very rst time you run FOX ONE, F.I.S. Calibration function (FOX Intelligent

Stepping) will require you to calibrate the CPU’s loading. Click “OK” to proceed

and start the Utility. F.I.S. is a feature of FOX ONE, which can automatically adjust your

CPU clock based on your current system loading.

Before you running the FOX ONE program, the system parameters (such as CPU

clock, voltage...etc.) are controlled by BIOS settings. After you run FOX ONE, it will

take over, and the controlling right will be transferred to FOX ONE. Later, if you exit

FOX ONE, then BIOS control will be back again.

C

A

U

T

I

O

N

!

Depending on hardware support, voltage monitoring and Fox Intelligent Stepping features are optional and only supported in some models. If the option is selectable, it also means the feature is supported.

■ Voltage Monitoring is supported only in FOX ONE Premium & Deluxe products.

■ Fox Intelligent Stepping is supported only in FOX ONE Deluxe products.

C

A

U

T

I

O

N

!

4

53

1. Main Page

Toolbar

Use the toolbar to navigate to other pages.

Alert Lamp

When the system is in healthy state, the color of alert lamp is green. When the system

is in abnormal state, the alert lamp color is red.

Switch Button

Click this button, it will simplify the whole FOX ONE control panel to a smaller

information bar (i.e. Simple Mode) as depicted below, you can drag this bar to any

place on your screen to help you monitoring system status.

Click here to go back to

FOX ONE full screen

Click here will drop the FOX ONE to Windows system tray

Exit FOX ONE

Show CPU

Information

Toolbar

Alert Lamp

Switch Button

Exit

Minimum

Homepage

Monitor Frequency/Voltage/Fan

speed/Temperature value

Conguration

Skin Button

4

54

Skin Button

There are more choices of FOX ONE screen panels. Click this button, you can select

your favorite skin (FOX ONE Panel).

Exit

Click this button to exit the program.

Minimum

Click this button to drop the FOX ONE to Windows system tray located at the lower

right corner of your screen.

Homepage

Click this button to visit Foxconn motherboard website :

http://www.foxconnchannel.com

Apply the changes

Click the new skin

picture to select

the new skin

Cancel the changes

4

55

Conguration

This menu allows you to congure :

1). Monitor interval (ms) :

This is to dene the interval of different messages of system settings which are to

be displayed on Simple Mode screen. Minimum value is 1 second.

2). Simple Mode :

To select which message of system settings are to be displayed in the Simple

Mode. Messages such as CPU frequency, voltage...etc., they can be displayed one

by one in Simple Mode.

3). F.I.S. Calibration (FOX Intelligent Stepping, Optional)

This function will re-calibrate the CPU's loading, and it may take several minutes

to proceed. The FOX ONE calibration process will apply different loadings to

your CPU, record PWM IC voltage together with the CPU clock running at these

loadings, so it can dene and estimate within a particular range of system loading,

what the CPU clock should be.

4

56

Step 1 : Click Calibration icon, a message pops out to ask for continue. Select Yes.

Step 2 : After data is collected, it will ask you to restart your computer now.

Later on, when the FOX ONE program is activated, and F.I.S. feature (in CPU

Page) is also enabled, FOX ONE will automatically adjust your CPU clock

according to your system loadings. (Loadings are like Power Gaming, Data

Mining...etc.)

4

57

2. CPU Page - CPU Control

This page lets you select (or overclock) CPU clock to meet the current performance

level of the system. The fastest and suitable CPU clock running for current system can

be calculated by FOX ONE automatically or manually input by yourselves.

Manual :

You can press the up/down button to adjust your CPU clock.

Auto :

Click this button to let FOX ONE check the highest CPU clock you can use. System

will raise the CPU clock step by step until it hangs, you can then push the RESET

button on your PC panel to restart the system. When system restarts, run FOX ONE

again, it will display a recommended highest CPU clock for you, click <Yes> to apply it.

A message informs you to

push RESET button later if

the system hangs nally.

Click Yes to continue.

Press Auto button to let FOX

ONE check the highest CPU

clock you can use.

Go to CPU page

FIS Features :

Select the different

benchmarks

Adjust by manual

Apply the

changes

Reset the

changes

4

58

You can see the system is

raising CPU clock until the

system hangs.

Push RESET button on the

front panel of your system to

restart the computer.

Run FOX ONE program

again, it will inform you

the previous test found

that 255MHz is the

recommended CPU clock for

your system.

Click Yes to apply it to your

system.

Now, your system is running

at a CPU clock of 255MHz.

4

59

FOX Intelligent Stepping (F.I.S., Optional)

Select FOX Intelligent Stepping will allow your system to automatically adjust your

CPU clock rate based on different system loadings. For example, if you select Power

Gaming, CPU clock will be driven to run at its maximum speed. While in Energy

Saving, CPU will lower down its speed to a minimum. The four benchmarks - Power

Gaming, Data Mining, Ofce and Energy Saving, the references of their system

loading were calculated and dened in the FIS Calibration option of Conguration

menu. Select Auto, CPU will automatically adjust its clock according to current system

loading.

3. Frequency Page - Frequency Control

This page lets you set memory and PCI Express frequencies by manual.

Go to Freq. page

Close this page

Reset the changes

Apply the changes

Select the option

you want to set

Adjust by manual

4

60

4. Limit Setting

4.1 Limit Setting - CPU Temperature

This page lets you to set CPU high limit temperature and enable the alert function.

4.2 Limit Setting - System Temperature

This page lets you to set system high limit temperature and enable the alert function.

Go to Limit

Setting page

Set high limit by

dragging the lever

Show current CPU

temperature value

Enable alert function

when the CPU

temperature is higher

than high limit value

Show current high

limit value of the CPU

temperature

Set high limit by

dragging the lever

Show current system

temperature value

Enable alert function

when the system

temperature is higher

than high limit value

Show current high

limit value of system

temperature

4

61

4.3 Limit Setting - CPU Fan

This page lets you to set CPU fan low limit rpm and enable the alert function.

4.4 Limit Setting - System Fan

This page lets you to set system fan low limit rpm and enable the alert function.

Set low limit rpm by

dragging the lever

Show current CPU

fan rpm value

Enable alert function

when the CPU fan runs

slower than the low

limit rpm value

Show current low limit

rpm value of CPU fan

Set low limit rpm by

dragging the lever

Show current system

fan rpm value

Enable alert function

when the system fan

runs slower than low

limit rpm value

Show current low limit

rpm value of system

fan

4

62

4.5 Limit Setting - FAN1 Fan

This page lets you to set FAN1 fan low limit rpm and enable the alert function.

5. Voltage Page - Voltage Control (Optional)

This page lets you set CPU voltage, memory voltage and North Bridge voltage

manually. CPU voltage can be stepped up/down by a unit of 12.5mV, while memory is

0.05V/step, and North Bridge is 0.04V/step.

Set low limit rpm by

dragging the lever

Show current FAN1

fan rpm value

Enable alert function

when the FAN1 fan

runs slower than low

limit rpm value

Show current low limit

rpm value of FAN1 fan

Go to Voltage page

Select the option

you want to set

Adjust by manual

Reset the changes

Apply the changes

4

63

6. Fan Page - Fan Control

This page lets you enable Smart Fan function or set the fan speed by manual.

When Smart Fan is selected, you must use a 4-pin CPU cooler in your system.

Go to Fan page

Set fan speed by

dragging the lever

Enable or disable

smart fan function

Apply the changes

4

64

FOX LiveUpdate

FOX LiveUpdate is a useful utility to backup and update your system BIOS, drivers and utilities by

local or online.

Supporting Operating Systems :

■ Windows XP (32-bit and 64-bit)

■ Windows Vista (32-bit and 64-bit)

Using FOX LiveUpdate :

1. Local Update

1-1 Local Update - BIOS Information

This page lets you know your system BIOS information.

*** : please refer to the physical motherboard for detail.

Exit

Toolbar

Minimum

Show current

BIOS information

Link to website

4

65

1-2 Local Update - Backup

This page can backup your system BIOS. You can click “Backup”, and key in a le name, then

click “Save” to nish the backup operation. The extension of this backup le is ".BIN" for Award

BIOS and ".ROM" for AMI BIOS. Default directory is "C:\Desktop\My Documents" in Windows XP

and "Documents" in Vista. Make sure you can remember the le name together with the directory

which it is stored, prevented that you may need them to recover your BIOS later.

1-3 Local Update - Update

This page helps you to update your BIOS from a local le. After click “Update”, An alert message

will be displayed to ensure if you really want to continue, click “Yes” to conrm. A setup wizard

will guide you to load a local BIOS le to nish the operation. You must remember from which

directory to load your new BIOS le (with an extension of ".BIN" for Award BIOS, ".ROM" for AMI

BIOS) before the setup wizard starts.

Key in a BIOS name

Click here

FOX LiveUpdate can automatically backup old BIOS before update. This feature can be

enabled in the "Congure-System" setup. Please refer to "Congure-System" section

for more detail. The default backup directory is C:\LiveUpdate_Temp, but the backup

le name will be automatically generated. It is hard to nd it out from a backup directory,

and we recommend you using Explorer to check date/time message of this backup le

to nd it out and write its name down to remember it.

C

A

U

T

I

O

N

!

4

66

2. Online Update

2-1 Online Update - Update BIOS

This page lets you update your system BIOS from Internet. Click “start”, it will search the new

BIOS from Internet. Then follow the wizard to nish the update operation.

2-2 Online Update - Update Driver

This page lets you update your system drivers from Internet. Click “start”, it will search the new

drivers from Internet. Then follow the wizard to nish the update operation.

Click here

Current information

Search new BIOS

from Internet

Browse detailed

information

Update BIOS

Close the window

Select BIOS to update

Click here

Current information

Search new drivers

from Internet

4

67

2-3 Online Update - Update Utility

This page lets you update utilities from Internet. Click “start”, it will search the new utilities from

Internet. Then follow the wizard to nish the update operation.

Browse detailed

information

Install the selected

driver

Close the window

Select the driver to update

Click here

Current information

Search new utilities

from Internet

Browse detailed

information

Install the selected

utility

Close the window

Select the utility to update

4

68

2-4 Online Update - Update All

This page lets you update your system drivers from Internet. Click “start”, it will search all new

BIOS/drivers/utilities from Internet. Then follow the wizard to nish the update operation.

Click here

Current information

Search all new BIOS/

drivers/utilities from

Internet

Browse detailed

BIOS information

Close the window

Browse detailed

driver information

Browse detailed

utility information

4

69

3. Congure

3-1 Congure - option

This page lets you set auto search options. After you enable the auto search function, FOX

LiveUpdate will start its searching from Internet and if any qualied item found, it will pop out a

message on the task bar to inform you to do the next step.

Double click on the icon as show below, you can see the detailed information.

Double click here

Apply the changes

Reset to default value

Click here

Set auto

search options

Select search

which kind of

versions

Set auto search

the latest

FOX LiveUpdate

4

70

When you enable "Auto Search FOX LiveUpdate", if your FOX LiveUpdate version is older, it will

auto search from internet and prompt you to install the new version.

3-2 Congure - System

This page lets you set the backup BIOS location and change different skin of the FOX LiveUpdate

utility.

Click here

Set the location of

download les or

auto backup BIOS

Determine if the FOX LiveUpdate can

auto run when the system starts up

Select different skin

of the software

Apply the changes

Reset to default value

Prompt you to

install the new

FOX LiveUpdate

4

71

3-3 Congure - Advance

This page lets you select to ash BIOS / Boot Block and clear CMOS. If you choose Flash Boot

Block, it means BIOS is not protective, and you must make sure the ash process is continuous

and without any interruption.

4. About & Help

This page shows some information about FOX LiveUpdate.

C

A

U

T

I

O

N

!

We recommend that you had better keep the default setting unchanged to avoid any

damage.

Click here

Select which BIOS ROM

to ash(Only available to

motherboard with backup

BIOS ROM )

Apply the changes

Reset to default value

Select to ash Boot Block

Select to clear CMOS

Click here

Show information about

FOX LiveUpdate

4

72

FOX LOGO

FOX LOGO is a simple and useful utility to backup, change and delete the boot time

Logo. The boot Logo is the image that appears on screen during POST (Power-On

Self-Test).

You can prepare a JPG image (640x480) le, then use FOX LOGO to open it and

change the boot time Logo. Boot time Logo will be displayed if you enable the BIOS

"Quiet Boot" setting in "Advanced BIOS Features" menu.

Supporting Operating Systems :

■ Windows XP (32-bit and 64-bit)

■ Windows Vista (32-bit and 64-bit)

Using FOX LOGO:

Main Page

When you change Logo or delete current Logo, the system will ash BIOS le auto-

matically. During this time, please DO NOT shut down the application and the system,

or the motherboard will be damaged seriously.

W

A

R

N

I

N

G

!

Minimize

Exit

Website

About

Backup

Change

De l e t e

Main screen

4

73

FOX DMI

FOX DMI is a full Desktop Management Interface viewer, and it provides three DMI data

formats : Report, Data Fields and Memory Dump.

With DMI information, system maker can easily analyze and troubleshoot your mother-

board if there is any problem occurred.

Supporting Operating Systems :

■ Windows XP (32-bit and 64-bit)

■ Windows Vista (32-bit and 64-bit)

Using FOX DMI:

Please operate this utility as the comments shows.

Click here to select the DMI Data format you need

Click here to select the type you want to view.

This chapter will cover two topics :

■ Creating a Bootable Array - Installing a new Windows XP

(or Vista) in a brand new RAID system.

■ Creating a Non-Bootable Array - Existing Windows XP

(or Vista) system with new RAID built as data storage.

It includes the following information :

■ RAID Conguration Introduction

■ Option ROM Utility

■ Create a RAID Driver Diskette

■ RAID Enable in BIOS

■ Select a RAID Array for use

■ Install a New Windows XP

■ Setting up a Non-Bootable RAID Array

The RAID BIOS Setup pictures shown in this chapter are for reference only, please refer to the practical screen.

5

75

Creating a Bootable Array - Installing a new Windows XP (or Vista) in

a brand new RAID system.

1. Follow 5-1 to create a RAID driver diskette.

2. Follow 5-2 to set RAID enabled in BIOS.

3. Follow 5-3 to select a RAID array for use.

4. Follow 5-4 to Install a new Windows Operating System.

What kinds of hardware and software you need here :

1. A oppy drive.

2. A DVD-ROM drive.

3. Several SATA hard disks.

4. A RAID driver diskette.

5. A motherboard driver CD. (To create RAID driver diskette if it is not bundled.)

6. Windows XP or Vista Install CD.

Creating a Non-Bootable Array - Existing Windows XP (or Vista)

system with new RAID built as data storage.

Follow 5-5 to go through the processes to build a new RAID array in your existing

Windows XP system, it includes :

1. Set RAID enabled in BIOS.

2. Follow 5-3 to select a RAID array for use.

3. Run setup program to install AMD RAID driver into your current Windows XP system.

4. Use Administrative Tools in Control Panel to format new RAID array.

What kinds of hardware and software you need here :

1. A DVD-ROM drive.

2. Several SATA hard disks.

3. A motherboard driver CD.

5

76

RAID Conguration Introduction

RAID (Redundant Array of Independent Disks) is a method for computer data storage

schemes that divide and/or replicate data among multiple hard drives. RAID can be

designed to provide increased data reliability (fault tolerance) or increased I/O (input/

output) performance, or both. The following RAID congurations are provided for

users.

There are three major key concepts in RAID:

1. Mirroring : The copying of data to more than one disk;

2. Striping : The splitting of data across more than one disk;

3. Error correction : Where redundant data is stored to allow problems to be detected

and possibly xed (known as fault tolerance).

Different RAID levels use one or more of these techniques, depending on the system

requirements. The main aims of using RAID are to improve reliability, important for

protecting information that is critical to a business, for example a database of customer

orders; or where speed is important, for example a system that delivers video on

demand TV programs to many viewers.

The conguration affects reliability and performance in different ways. The problem

with using more disks is that it is more likely that one will go wrong, but by using

error checking the total system can be made more reliable by being able to survive

and repair the failure. Basic mirroring can speed up reading data as a system can

read different data from both the disks, but it may be slow for writing if it insists that

both disks must conrm that the data is correctly written. Striping is often used for

performance, where it allows sequences of data to be read off multiple disks at the

same time. Error checking typically will slow the system down as data needs to be

read from several places and compared. The design of RAID systems is therefore a

compromise and understanding the requirements of a system is important. Modern

disk arrays typically provide the facility to select the appropriate RAID conguration.

RAID is often used in high availability systems, where it is important that the system

keeps running as much of the time as possible.

5

77

RAID 0 (Striped)

RAID 0 reads and writes sectors of data interleaved among multiple drives. If any disk member fails, it affects the entire array. The disk array data capacity is equal to the number of drive members times the capacity of the smallest member. RAID 0 does not support fault tolerance.

RAID 1 (Mirror)

RAID 1 writes duplicate data onto a pair of drives and reads both sets of data in parallel. If one of the mirrored drives suffers a mechanical failure or does not respond, the remaining drive will continue to function. Due to redundancy, the drive capacity of the array is the capacity of the smallest drive.

RAID Ready

A "RAID Ready" system is a specic system conguration that, with the addition of a second Serial ATA hard drive, can be seamlessly migrated to a conguration that

provides either improved storage performance or data protection from a single hard drive failure.

RAID 10 (Striped Mirror)

RAID 10 is a combination of striping and mirroring. This conguration provides optimal

speed and reliability, but you need four SATA hard disks.

Span (JBOD)

JBOD stands for “Just a Bunch of Disks”. Each drive is accessed as if it were on a

standard SCSI host bus adapter. This is useful when a single drive conguration is

needed, but it offers no speed improvement or fault tolerance. A spanned volume is a formatted partition which data is stored on more than one hard disk, yet appears as one volume. Unlike RAID, spanned volumes have no fault-tolerance, so if any disk fails, the data on the whole volume could be lost. Additionally, the system or boot

partitions cannot be included in a spanned volume. FAT16/32 and NTFS le systems

may be used, and the volume can span up to 32 hard disks.

Comparison Table :

Solution Hard Disks No. Capacity Performance Reliability Application

RAID0 >=2 All Highest Dangerous Look for speed

RAID1 2 50% Read faster Excellent 100% Data backup

RAID10 >=4 (Even number) Smallest*2 High Excellent Unlimited budget

Span >=1 All none Dangerous Big disk space

5

78

Option ROM Utility

The Option ROM Utility supports RAID 0, RAID 1 and RAID10 functions. It allows you to get high performance with fault tolerance, big capacity, or data safety provided by different RAID functions.

Here, we will use four SATA hard disks as an example to guide you through how

to congure your RAID system. Assume four hard disks are connected to the

motherboard :

Lower SATA port of SATA1_SATA2 - HDS728090PLA380, 82.34GB

Upper SATA port of SATA1_SATA2 - WDC WD1200JD-98HBB0, 120.03GB

Lower SATA port of SATA3_SATA4 - Hitachi HDT725025VLA3, 250.05GB

Upper SATA port of SATA3_SATA4 - ST3320620AS, 320.07GB

The relationships between port numbers in the Option ROM Utility and SATA ports on

the motherboard are shown below. They are :

Channel 1 is the lower SATA port of SATA1_2 of the motherboard.

Channel 2 is the upper SATA port of SATA1_2.

Channel 3 is the lower SATA port of SATA3_4.

Channel 4 is the upper SATA port of SATA3_4.

To achieve the best performance and reliability, we highly recommend you

using the hard disks with the same brand, size and model number. Though

we are using four different hard disks as an example to describe RAID

function in this chapter, it is only helpful in explaining what the nal disk

volume of the RAID array will be. In the real world, using the same model to

build a disk array is strongly recommended.

W

A

R

N

I

N

G

!

Channel :ID Drive Model Compatibilities Capacity(GB) Assignment

Extent 1 82.28 Free

2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G 120.03

Extent 1 119.96 Free

3 :Mas Hitachi HDT725025VLA3 SATA 3G 250.05 Extent 1 249.99 Free 4 :Mas ST3320620AS SATA 1.5G 320.07

Extent 1 320.00 Free

[↑] Up [↓] Down [ESC] Exit [Ctrl+H] Secure Erase [PgUp/Dn] Page Change

[ Keys Available ]

1 :Mas HDS728090PLA380 SATA 3G 82.34

[ View Drives Assignment ]

5

79

Two topics will be covered in the following sections :

1). Creating a Bootable Array - Installing a new Windows XP in a brand new RAID

system.

2). Creating a Non-Bootable Array - Existing Windows XP system with new RAID

built as data storage.

Install SATA Hard Disks before we continue :

■ Shut down your computer.

■ Install SATA hard disks into the drive bays, connect all power and SATA cables.

■ Before installing the SATA hard disks, make sure to turn off the computer

and unplug the power cord from the power outlet to prevent damage to the

hardware.

C

A

U

T

I

O

N

!

5

80

1. Find a PC, put a diskette into its oppy

drive A:, this diskette will be formatted later.

Put the driver CD into DVD-ROM drive.

2. Depending on which platform your system

is, normally, it is a 32-bit XP system. Use

Windows explorer, and go to CD:\Driver\

AMD\RAID\Floppy\WinXP\, click on

RaidTool icon to start the creation.

3. Click "GO" to start.

4. Select the desired destination FDD drive.

It can be the default drive A: or any USB

FDD. Click "OK" to continue.

5. Insert a diskette, click "OK" to continue.

5-1 Create a RAID Driver Diskette

If you want to install a brand new Windows XP on a RAID system, you need to create a

RAID driver oppy diskette which will be used during Windows XP installation later.

5

81

6. You can input a volume label for this diskette,

click on "Start" to format.

7. Click on "OK" to go through this warning

message.

8. Format nished. Click "OK" to continue copying of

RAID driver into this diskette.

9. Check if the diskette contains the driver les.

5

82

5-2 RAID Enable in BIOS

1. Enter the BIOS setup by pressing <DEL> key when boot up.

2. Select the “Integrated Peripherals” from the “Main menu”, then select the “SATA

Conguration” menu and press <Enter> to go to the conguration items.

3. Enable RAID function and individual SATA port for hard drive or DVD connection.

4. Press <F10> to save the setting then PC will reboot itself.

5-3 Select a RAID Array for Use

When BIOS is restarted, it will display a message asking you to press [Ctrl-F] key to

enter the main menu of Option ROM Utility. Press [Ctrl-F], the Main Menu appears.

View Drive Assignment. . . . . . . [ 1 ]

Define LD . . . . . . . . . . . . . . . . . [ 2 ]

Delete LD . . . . . . . . . . . . . . . . . [ 3 ]

Controller Configuration . . . . . . [ 4 ]

[ Main Menu ]

Press 1..4 to Select Option [ESC] Exit

[ Keys Available ]

SB710 SATA Controller [Enabled] Help Item

SB710 SATA Mode

Native IDE RAID AHCI Legacy IDE

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

[RAID]

Options

5

83

Create RAID 0 (Striped)

Here, we will show you how to create two RAID 0 Logical Drives (LD) by using two

hard disks.

1. Select [2] from the main menu, "Dene LD Menu" appears.

2. Press [Enter], the screen appears as below, select RAID 0.

3. Use [↓] key to select the hard disks, press [Space] key to change its assignment

status to "Y".

4. Press [Ctrl-Y] to save the setting.

[ Dene LD Menu ]

LD No RAID Mode Total Drv Capacity(GB) Status

LD 1 RAID 0

2 163.99 Functional

LD 2 −−−− −−−− −−−−−−−− −−−− LD 3 −−−− −−−− −−−−−−−− −−−− LD 4 −−−− −−−− −−−−−−−− −−−− LD 5 −−−− −−−− −−−−−−−− −−−− LD 6 −−−− −−−− −−−−−−−− −−−− LD 7 −−−− −−−− −−−−−−−− −−−− LD 8 −−−− −−−− −−−−−−−− −−−− LD 9 −−−− −−−− −−−−−−−− −−−− LD10 −−−− −−−− −−−−−−−− −−−−

[↑] Up [↓] Down [ESC] Exit [Enter] Select

[ Keys Available ]

LD 1 −−−− −−−− −−−−−−−− −−−−

[ Dene LD Menu ]

LD No RAID Mode Total Drv

LD 1 RAID 0 0

Stripe Block: 64 KB Fast Init: ON Gigabyte Boundary: ON Cache Mode: WriteThru

Channel :ID Drive Model Compatibilities Capacity(GB) Assignment

1 :Mas HDS728090PLA380 SATA 3G 82.34 Y 2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G 120.03 Y 3 :Mas Hitachi HDT725025VLA3 SATA 3G 250.05 N 4 :Mas ST3320620AS SATA 1.5G 320.07 N

[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change

[ Keys Available ]

[ Dene LD Menu ]

[ Drives Assignment ]

Y

5

84

5. A message prompts.

Press [Ctrl-Y] to erase the RAID array.

6. Another screen prompts.

Press [Ctrl-Y]. Input 80GB to select the rst

logical drive (LD1) and press [Enter].

7. The selection of LD1 array is completed.

As we want to introduce how to create two logical drives by using the same two hard

drives here, so we will press [↓] to select LD2.

[ Dene LD Menu ]

LD No RAID Mode Total Drv Capacity(GB) Status

LD 1 RAID 0

2 163.99 Functional

LD 2 −−−− −−−− −−−−−−−− −−−− LD 3 −−−− −−−− −−−−−−−− −−−− LD 4 −−−− −−−− −−−−−−−− −−−− LD 5 −−−− −−−− −−−−−−−− −−−− LD 6 −−−− −−−− −−−−−−−− −−−− LD 7 −−−− −−−− −−−−−−−− −−−− LD 8 −−−− −−−− −−−−−−−− −−−− LD 9 −−−− −−−− −−−−−−−− −−−− LD10 −−−− −−−− −−−−−−−− −−−−

[↑] Up [↓] Down [ESC] Exit [Enter] Select

[ Keys Available ]

LD 1 RAID 0 2 79.99 Functional

[ Dene LD Menu ]

Fast Initialization Option has been selected It will erase the MBR data of the disks, <Press Ctrl-Y Key if you are sure to erase it> <Press any other key to ignore this option>

Press Ctrl-Y to Modify Array Capacity or press any other key to use maximum capacity...

[ Dene LD Menu ]

LD No RAID Mode Total Drv Capacity(GB)

LD 1 RAID 0

2 164.56

Stripe Block: 64 KB Fast Init: ON Gigabyte Boundary: OFF Cache Mode: WriteThru

Channel :ID Drive Model Compatibilities Capacity(GB) Assignment

1 :Mas HDS728090PLA380 SATA 3G 82.34 Y 2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G 120.03 Y 3 :Mas Hitachi HDT725025VLA3 SATA 3G 250.05 N 4 :Mas ST3320620AS SATA 1.5G 320.07 N

[0-9] Input Capacity [Enter] Save [Backspace] Delete [ESC] exit

[ Keys Available ]

RAID 0

[ Dene LD Menu ]

[ Drives Assignment ]

Enter array capacity (in GB) here:

5

85

8. When LD2 is selected, press [Enter] to continue.

9. You can see in the previous example, about 40GB of Channel 1 and 2 hard disks were

allocated. Select the remaining spaces from them for RAID 0 again.

Press [Ctrl-Y] to save the setting.

[ Dene LD Menu ]

LD No RAID Mode Total Drv Capacity(GB) Status

LD 1 RAID 0

2 79.99 Functional

LD 2 −−−− −−−− −−−−−−−− −−−− LD 3 −−−− −−−− −−−−−−−− −−−− LD 4 −−−− −−−− −−−−−−−− −−−− LD 5 −−−− −−−− −−−−−−−− −−−− LD 6 −−−− −−−− −−−−−−−− −−−− LD 7 −−−− −−−− −−−−−−−− −−−− LD 8 −−−− −−−− −−−−−−−− −−−− LD 9 −−−− −−−− −−−−−−−− −−−− LD10 −−−− −−−− −−−−−−−− −−−−

[↑] Up [↓] Down [ESC] Exit [Enter] Select

[ Keys Available ]

LD 2 −−−− −−−− −−−−−−−− −−−−

[ Dene LD Menu ]

LD No RAID Mode Total Drv

LD 2 RAID 0 2

Stripe Block: 64 KB Fast Init: ON Gigabyte Boundary: ON Cache Mode: WriteThru

Channel :ID Drive Model Compatibilities Capacity(GB) Assignment

1 :Mas HDS728090PLA380 SATA 3G 42.34 Y 2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G 80.03 Y 3 :Mas Hitachi HDT725025VLA3 SATA 3G 250.05 N 4 :Mas ST3320620AS SATA 1.5G 320.07 N

[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change

[ Keys Available ]

[ Dene LD Menu ]

[ Drives Assignment ]

Y

5

86

10. A message prompts.

Press [Ctrl-Y] to erase the RAID array.

11. The remaining disk spaces are assigned to LD2. The size is about 42GB*2 =

84GB.

[ Dene LD Menu ]

LD No RAID Mode Total Drv Capacity(GB) Status

LD 1 RAID 0

2 79.99 Functional

LD 2 −−−− −−−− −−−−−−−− −−−− LD 3 −−−− −−−− −−−−−−−− −−−− LD 4 −−−− −−−− −−−−−−−− −−−− LD 5 −−−− −−−− −−−−−−−− −−−− LD 6 −−−− −−−− −−−−−−−− −−−− LD 7 −−−− −−−− −−−−−−−− −−−− LD 8 −−−− −−−− −−−−−−−− −−−− LD 9 −−−− −−−− −−−−−−−− −−−− LD10 −−−− −−−− −−−−−−−− −−−−

[↑] Up [↓] Down [ESC] Exit [Enter] Select

[ Keys Available ]

LD 2 RAID 0 2 83.99 Functional

[ Dene LD Menu ]

LD No RAID Mode Total Drv

LD 2 RAID 0 2

Stripe Block: 64 KB Fast Init: ON Gigabyte Boundary: ON Cache Mode: WriteThru

Channel :ID Drive Model Compatibilities Capacity(GB) Assignment

1 :Mas HDS728090PLA380 SATA 3G 42.28 Y 2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G 79.96 Y 3 :Mas Hitachi HDT725025VLA3 SATA 3G 250.05 N 4 :Mas ST3320620AS SATA 1.5G 320.07 N

[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change

[ Dene LD Menu ]

[ Keys Available ]

[ Dene LD Menu ]

Fast Initialization Option has been selected It will erase the MBR data of the disks, <Press Ctrl-Y Key if you are sure to erase it> <Press any other key to ignore this option>

5

87

Create RAID 1 (Mirror)

Here, we will show you how to create one Mirrored Logical Drives (LD) by using two

hard disks.

1. Select [2] from the main menu, "Dene LD Menu" appears.

2. Press [Enter], the screen appears as below, select RAID 1.

3. Use [↓] key to select the hard disks, press [Space] key to change its assignment

status to "Y".

4. Press [Ctrl-Y] to save the setting.

[ Dene LD Menu ]

LD No RAID Mode Total Drv Capacity(GB) Status

LD 1 RAID 0

2 163.99 Functional

LD 2 −−−− −−−− −−−−−−−− −−−−

LD 3 −−−− −−−− −−−−−−−− −−−− LD 4 −−−− −−−− −−−−−−−− −−−− LD 5 −−−− −−−− −−−−−−−− −−−− LD 6 −−−− −−−− −−−−−−−− −−−− LD 7 −−−− −−−− −−−−−−−− −−−− LD 8 −−−− −−−− −−−−−−−− −−−− LD 9 −−−− −−−− −−−−−−−− −−−− LD10 −−−− −−−− −−−−−−−− −−−−

[↑] Up [↓] Down [ESC] Exit [Enter] Select

[ Keys Available ]

LD 1 −−−− −−−− −−−−−−−− −−−−

[ Dene LD Menu ]

LD No RAID Mode Total Drv

LD 1 RAID 1 2

Stripe Block: NA Fast Init: ON Gigabyte Boundary: ON Cache Mode: WriteThru

Channel :ID Drive Model Compatibilities Capacity(GB) Assignment

1 :Mas HDS728090PLA380 SATA 3G 82.34 N 2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G 120.03 N 3 :Mas Hitachi HDT725025VLA3 SATA 3G 250.05 Y 4 :Mas ST3320620AS SATA 1.5G 320.07 Y

[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change

[ Keys Available ]

[ Dene LD Menu ]

[ Drives Assignment ]

Y

5

88

5. A message prompts.

Press [Ctrl-Y] to erase the RAID array.

6. Another screen prompts.

Press any key to use the maximum capacity.

7. The creation of RAID 1 is completed.

The nal capacity of 249.99GB (250GB) is the smaller size of the two hard drives.

[ Dene LD Menu ]

LD No RAID Mode Total Drv Capacity(GB) Status

LD 1 −−−− −−−− −−−−−−−− −−−−

LD 2 −−−− −−−− −−−−−−−− −−−− LD 3 −−−− −−−− −−−−−−−− −−−− LD 4 −−−− −−−− −−−−−−−− −−−− LD 5 −−−− −−−− −−−−−−−− −−−− LD 6 −−−− −−−− −−−−−−−− −−−− LD 7 −−−− −−−− −−−−−−−− −−−− LD 8 −−−− −−−− −−−−−−−− −−−− LD 9 −−−− −−−− −−−−−−−− −−−− LD10 −−−− −−−− −−−−−−−− −−−−

[↑] Up [↓] Down [ESC] Exit [Enter] Select

[ Keys Available ]

LD 3 RAID 1 2 249.99 Functional

[ Dene LD Menu ]

LD No RAID Mode Total Drv

LD 1 RAID 1 2

Stripe Block: NA Fast Init: ON Gigabyte Boundary: ON Cache Mode: WriteThru

Channel :ID Drive Model Compatibilities Capacity(GB) Assignment

1 :Mas HDS728090PLA380 SATA 3G 82.34 N 2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G 120.03 N 3 :Mas Hitachi HDT725025VLA3 SATA 3G 250.05 Y 4 :Mas ST3320620AS SATA 1.5G 320.07 Y

Fast Initial

[ Dene LD Menu ]

[ Drives Assignment ]

Press Ctrl-Y to Modify Array Capacity or press any other key to use maximum capacity...

Fast Initialization Option has been selected It will erase the MBR data of the disks, <Press Ctrl-Y Key if you are sure to erase it> <Press any other key to ignore this option>

5

89

Create RAID 10 (Striped Mirror)

Here, we will show you how to create one Striped Mirror Logical Drives (LD) by using

four hard disks.

1. Select [2] from the main menu, "Dene LD Menu" appears.

2. Press [Enter], the screen appears as below, select RAID 10.

3. Use [↓] key to select the hard disks, press [Space] key to change its assignment

status to "Y".

4. Press [Ctrl-Y] to save the setting.

[ Dene LD Menu ]

LD No RAID Mode Total Drv Capacity(GB) Status

LD 1 RAID 0

2 163.99 Functional

LD 2 −−−− −−−− −−−−−−−− −−−−

LD 3 −−−− −−−− −−−−−−−− −−−− LD 4 −−−− −−−− −−−−−−−− −−−− LD 5 −−−− −−−− −−−−−−−− −−−− LD 6 −−−− −−−− −−−−−−−− −−−− LD 7 −−−− −−−− −−−−−−−− −−−− LD 8 −−−− −−−− −−−−−−−− −−−− LD 9 −−−− −−−− −−−−−−−− −−−− LD10 −−−− −−−− −−−−−−−− −−−−

[↑] Up [↓] Down [ESC] Exit [Enter] Select

[ Keys Available ]

LD 1 −−−− −−−− −−−−−−−− −−−−

[ Dene LD Menu ]

LD No RAID Mode Total Drv

LD 1 RAID 10 4

Stripe Block: 64 KB Fast Init: ON Gigabyte Boundary: ON Cache Mode: WriteThru

Channel :ID Drive Model Compatibilities Capacity(GB) Assignment

1 :Mas HDS728090PLA380 SATA 3G 82.34 Y 2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G 120.03 Y 3 :Mas Hitachi HDT725025VLA3 SATA 3G 250.05 Y 4 :Mas ST3320620AS SATA 1.5G 320.07 Y

[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change

[ Keys Available ]

[ Dene LD Menu ]

[ Drives Assignment ]

Y

5

90

5. A message prompts.

Press [Ctrl-Y] to erase the RAID array.

6. Another screen prompts.

Press any key to use the maximum capacity.

7. The creation of RAID 10 is completed.

The nal capacity of 163.99GB (81.995GB*2) is twice capacities of the smallest size

of the four hard drives.

[ Dene LD Menu ]

LD No RAID Mode Total Drv Capacity(GB) Status

LD 1 RAID 0

2 163.99 Functional

LD 2 −−−− −−−− −−−−−−−− −−−− LD 3 −−−− −−−− −−−−−−−− −−−− LD 4 −−−− −−−− −−−−−−−− −−−− LD 5 −−−− −−−− −−−−−−−− −−−− LD 6 −−−− −−−− −−−−−−−− −−−− LD 7 −−−− −−−− −−−−−−−− −−−− LD 8 −−−− −−−− −−−−−−−− −−−− LD 9 −−−− −−−− −−−−−−−− −−−− LD10 −−−− −−−− −−−−−−−− −−−−

[↑] Up [↓] Down [ESC] Exit [Enter] Select

[ Keys Available ]

LD 1 RAID 10 4 163.99 Functional

[ Dene LD Menu ]

LD No RAID Mode Total Drv

LD 1 RAID 10 4

Stripe Block: 64 KB Fast Init: ON Gigabyte Boundary: ON Cache Mode: WriteThru

Channel :ID Drive Model Compatibilities Capacity(GB) Assignment

1 :Mas HDS728090PLA380 SATA 3G 82.34 Y 2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G 120.03 Y 3 :Mas Hitachi HDT725025VLA3 SATA 3G 250.05 Y 4 :Mas ST3320620AS SATA 1.5G 320.07 Y

Fast Initial

[ Dene LD Menu ]

[ Drives Assignment ]

Press Ctrl-Y to Modify Array Capacity or press any other key to use maximum capacity...

Fast Initialization Option has been selected It will erase the MBR data of the disks, <Press Ctrl-Y Key if you are sure to erase it> <Press any other key to ignore this option>

5

91

Create RAID Ready

A "RAID Ready" system is a specic system conguration that, with the addition of

a second Serial ATA hard drive, can be seamlessly migrated to a conguration that

provides either improved storage performance or data protection from a single hard

drive failure.

1. Select [2] from the main menu, "Dene LD Menu" appears.

2. Press [Enter], the screen appears as below, select RAID Ready.

3. Use [↓] key to select the hard disk, press [Space] key to change its assignment

status to "Y".

4. Press [Ctrl-Y] to save the setting.

[ Dene LD Menu ]

LD No RAID Mode Total Drv Capacity(GB) Status

LD 1 RAID 0

2 163.99 Functional

LD 2 −−−− −−−− −−−−−−−− −−−− LD 3 −−−− −−−− −−−−−−−− −−−− LD 4 −−−− −−−− −−−−−−−− −−−− LD 5 −−−− −−−− −−−−−−−− −−−− LD 6 −−−− −−−− −−−−−−−− −−−− LD 7 −−−− −−−− −−−−−−−− −−−− LD 8 −−−− −−−− −−−−−−−− −−−− LD 9 −−−− −−−− −−−−−−−− −−−− LD10 −−−− −−−− −−−−−−−− −−−−

[↑] Up [↓] Down [ESC] Exit [Enter] Select

[ Keys Available ]

LD 1 −−−− −−−− −−−−−−−− −−−−

[ Dene LD Menu ]

LD No RAID Mode Total Drv

LD 1 RAID READY 1

Stripe Block: NA Fast Init: ON Gigabyte Boundary: NA Cache Mode: WriteThru

Channel :ID Drive Model Compatibilities Capacity(GB) Assignment

1 :Mas HDS728090PLA380 SATA 3G 82.34 N 2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G 120.03 N 3 :Mas Hitachi HDT725025VLA3 SATA 3G 250.05 N 4 :Mas ST3320620AS SATA 1.5G 320.07 Y

[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change

[ Keys Available ]

[ Dene LD Menu ]

[ Drives Assignment ]

Y

5

92

5. A message prompts.

Press [Ctrl-Y] to erase the RAID array.

6. The creation of RAID Ready is completed.

[ Dene LD Menu ]

LD No RAID Mode Total Drv Capacity(GB) Status

LD 1 RAID 0

2 163.99 Functional

LD 2 −−−− −−−− −−−−−−−− −−−− LD 3 −−−− −−−− −−−−−−−− −−−− LD 4 −−−− −−−− −−−−−−−− −−−− LD 5 −−−− −−−− −−−−−−−− −−−− LD 6 −−−− −−−− −−−−−−−− −−−− LD 7 −−−− −−−− −−−−−−−− −−−− LD 8 −−−− −−−− −−−−−−−− −−−− LD 9 −−−− −−−− −−−−−−−− −−−− LD10 −−−− −−−− −−−−−−−− −−−−

[↑] Up [↓] Down [ESC] Exit [Enter] Select

[ Keys Available ]

LD 1 RAID READY 1 319.99 Functional

[ Dene LD Menu ]

LD No RAID Mode Total Drv

LD 1 RAID READY 1

Stripe Block: NA Fast Init: ON Gigabyte Boundary: NA Cache Mode: WriteThru

Channel :ID Drive Model Compatibilities Capacity(GB) Assignment

1 :Mas HDS728090PLA380 SATA 3G 42.28 N 2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G 79.96 N 3 :Mas Hitachi HDT725025VLA3 SATA 3G 250.05 N 4 :Mas ST3320620AS SATA 1.5G 320.07 Y

[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change

[ Dene LD Menu ]

[ Keys Available ]

[ Dene LD Menu ]

Fast Initialization Option has been selected It will erase the MBR data of the disks, <Press Ctrl-Y Key if you are sure to erase it> <Press any other key to ignore this option>

5

93

Create JBOD

Here, we will show you how to create a JBOD Logical Drives (LD) by using four hard

disks.

1. Select [2] from the main menu, "Dene LD Menu" appears.

2. Press [Enter], the screen appears as below, select JBOD.

3. Use [↓] key to select the hard disks, press [Space] key to change its assignment

status to "Y".

4. Press [Ctrl-Y] to save the setting.

[ Dene LD Menu ]

LD No RAID Mode Total Drv Capacity(GB) Status

LD 1 RAID 0

2 163.99 Functional

LD 2 −−−− −−−− −−−−−−−− −−−− LD 3 −−−− −−−− −−−−−−−− −−−− LD 4 −−−− −−−− −−−−−−−− −−−− LD 5 −−−− −−−− −−−−−−−− −−−− LD 6 −−−− −−−− −−−−−−−− −−−− LD 7 −−−− −−−− −−−−−−−− −−−− LD 8 −−−− −−−− −−−−−−−− −−−− LD 9 −−−− −−−− −−−−−−−− −−−− LD10 −−−− −−−− −−−−−−−− −−−−

[↑] Up [↓] Down [ESC] Exit [Enter] Select

[ Keys Available ]

LD 1 −−−− −−−− −−−−−−−− −−−−

[ Dene LD Menu ]

LD No RAID Mode Total Drv

LD 1 JBOD 4

Stripe Block: NA Fast Init: ON Gigabyte Boundary: NA Cache Mode: NA

Channel :ID Drive Model Compatibilities Capacity(GB) Assignment

1 :Mas HDS728090PLA380 SATA 3G 82.34 Y 2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G 120.03 Y 3 :Mas Hitachi HDT725025VLA3 SATA 3G 250.05 Y 4 :Mas ST3320620AS SATA 1.5G 320.07 Y

[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change

[ Keys Available ]

[ Dene LD Menu ]

[ Drives Assignment ]

Y

Foxconn Cinema Premium User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual