Foxconn Cinema II Deluxe, Cinema II Series, Cinema II Premium User Manual

Cinema II Series Motherboard

User’s Manual

Statement:

This manual is the intellectual property of Foxconn, Inc. Although the information

in this manual may be changed or modied at any time, Foxconn does not obligate

itself to inform the user of these changes.

Trademark:

All trademarks are the property of their respective owners.

Version:

User’s Manual V1.0 for Cinema II Series motherboard.

P/N: 3A221M800-000-G

Symbol description:

Caution : refers to important information that can help you to use motherboard

better, and tells you how to avoid problems.

Warning : indicating a potential risk of hardware damage or physical injury

may exist.

WEEE:

The use of this symbol indicates that this product may not be treated as household

waste. By ensuring this product is disposed of correctly, you will help prevent potential

negative consequences for the environment and human health, which could other-

wise be caused by inappropriate waste handling of this product. For more detailed

information about recycling of this product, please contact your local city ofce, your

household waste disposal service or the shop where you purchased this product.

More information:

If you want more information about our products, please visit Foxconn’s

website: http://www.foxconnchannel.com

All trade names are registered trademarks of respective manufacturers listed.

All images are for reference only, please refer to the physical motherboard for specic features.

Declaration of conformity

HON HAI PRECISION INDUSTRY COMPANY LTD

66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,

TAIPEI HSIEN, TAIWAN, R.O.C.

declares that the product

Motherboard Cinema II Premium/Cinema II Deluxe

is in conformity with

(reference to the specication under which conformity is declared in

accordance with 89/336 EEC-EMC Directive)

■ EN 55022:1998/A2: 2003 Limits and methods of measurements of radio

disturbance characteristics of information technology equipment

■ EN 61000-3-2/:2000 Electromagnetic compatibility (EMC)

Part 3: Limits Section 2: Limits for harmonic current emissions (equipment input current <= 16A per phase)

■ EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)

Part 3: Limits

Section 2: Limits of voltage uctuations and icker in low

voltage supply systems for equipment with rated current <= 16A

■ EN 55024/A2:2003 Information technology equipment-Immunity

characteristics limits and methods of measurement

Signature : Place / Date : TAIPEI/2009

Printed Name : James Liang

Declaration of conformity

Trade Name: FOXCONN

Model Name:

Cinema II Premium/Cinema II Deluxe

Responsible Party: PCE Industry Inc.

Address: 458 E. Lambert Rd.

Fullerton, CA 92835

Telephone: 714-738-8868

Facsimile: 714-738-8838

Equipment Classication: FCC Class B Subassembly

Type of Product: Motherboard

Manufacturer: HON HAI PRECISION INDUSTRY

COMPANY LTD

Address: 66 , CHUNG SHAN RD., TU-CHENG

INDUSTRIAL DISTRICT, TAIPEI HSIEN,

TAIWAN, R.O.C.

Supplementary Information:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions : (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Tested to comply with FCC standards.

Signature : Date : 2009

Installation Precautions

Please carefully read the following procedures to install your computer :

■ It is suggested to select high-quality, certied fans in order to avoid damage

to the motherboard and CPU due to high temperature. Never turn on the

computer if the CPU fan is not properly installed.

■ We cannot guarantee that your system can operate normally when your

CPU is overclocked. Normal operation depends on the overclocking capac-

ity of your device.

■ If there is any, when connecting USB, audio, RS232 COM, IrDA or S/PDIF

cables to the internal connectors on the motherboard, make sure their

pinouts are matching with the connectors on the motherboard. Incorrect con-

nections might damage the motherboard.

■ When handling the motherboard, avoid touching any metal leads or connec-

tors.

■ If there is a PCI Express x16 graphics card installed in your system, we

recommend using a 24-pin ATX power supply to get the best performance.

■ Before turning on the power, please make sure the power supply AC input

voltage setting has been congured to the local standard.

■ To prevent damage to the motherboard, do not allow screws to come in contact

with the motherboard circuit or its components. Also, make sure there are no

leftover screws or metal components placed on the motherboard or within the

computer casing.

■ If you are uncertain about any installation steps or have a problem related to

the use of the product, please consult a certied computer technician.

■ Electrostatic discharge (ESD) is the sudden and momentary electric current

that ows between two objects at different electrical potentials. Normally it

comes out as a spark which will quickly damage your electronic equipment.

Please wear an electrostatic discharge (ESD) wrist strap when handling

components such as a motherboard, CPU or memory.

■ Ensure that the DC power supply is turned off before installing or removing

CPU, memory, expansion cards or other peripherals. It is recommended to

unplug the AC power cord from the power supply outlet. Failure to unplug

the power supply cord may result in serious damage to your system.

TABLE OF CONTENTS

Chapter 1 Product Introduction

Product Specications ..............................................................................2

Layout.......................................................................................................4

Back Panel Connectors ............................................................................5

Chapter 2 Hardware Install

Install the CPU and CPU Cooler ..............................................................8

Install the Memory ..................................................................................10

Install an Expansion Card ......................................................................12

Install other Internal Connectors ............................................................13

Jumpers ..................................................................................................17

Chapter 3 BIOS Setup

Enter BIOS Setup ...................................................................................19

Main Menu..............................................................................................19

System Information ................................................................................21

Boot Setting Conguration .....................................................................24

Advanced Chipset Features ...................................................................26

Integrated Peripherals ............................................................................30

Power Management ..............................................................................33

Hardware Monitor ...................................................................................35

Overclock Control Center .......................................................................36

BIOS Security Features ..........................................................................47

Load Optimal Defaults ............................................................................48

Save & Exit Setup ..................................................................................48

Exit without Saving .................................................................................48

Chapter 4 CD Instruction

Utility CD Introduction.............................................................................50

FOX ONE

Main Page ........................................................................................53

CPU Control .....................................................................................57

Frequency Control ............................................................................59

Limit Setting......................................................................................60

Voltage Control .................................................................................62

Fan Control.......................................................................................63

FOX LiveUpdate

Local Update ....................................................................................64

Online Update ..................................................................................66

Congure .........................................................................................69

About & Help ....................................................................................71

FOX LOGO .............................................................................................72

FOX DMI ................................................................................................73

Chapter 5 RAID Conguration

RAID Conguration Introduction.............................................................76

Option ROM Utility ..................................................................................78

Create a RAID Driver Diskette ...............................................................80

RAID Enable in BIOS .............................................................................82

Select a RAID Array for Use ...................................................................82

Install a New Windows XP .....................................................................95

Setting Up a Non-Bootable RAID Array..................................................99

Appendix - ATI Hybrid CrossFireX™ Technology ......................................105

Technical Support :

Website :

http://www.foxconnchannel.com

Support Website :

http://www.foxconnsupport.com

Worldwide online contact Support :

http://www.foxconnsupport.com/inquiry.aspx

CPU Support List :

http://www.foxconnsupport.com/cpusupportlist.aspx

Memory, VGA Compatibility List :

http://www.foxconnsupport.com/complist.aspx

Support

Thank you for buying Foxconn Cinema II Series motherboard.

Foxconn products are engineered to maximize computing power,

providing only what you need for break-through performance.

With advanced overclocking capability and a range of connectivity

features for today multi-media computing requirements, Cinema

II Premium/Cinema II Deluxe enables you to unleash more power

from your computer.

This chapter includes the following information:

■ Product Specications

■ Layout

■ Back Panel Connectors

1-1 Product Specications

CPU Support the AMD PhenomII, Athlon II, Athlon x4, Athlon x3, Athlon x2

processor families, AM3 socket processors

HyperTransport Up to 5200MT/s (HT3.0) for AM3 CPU

Chipset North Bridge: AMD 785G

South Bridge: SB710

Memory 4 x 240-pin DDR3 DIMM sockets

Support up to 16GB of system memory

Dual channel DDR3 1066/1333/1600MHz (oc*) architecture(oc*: overclocking)

Integrated Graphics Integrated ATI RadeonTM 4200 HD GPU

SidePort Memory-DDR3 1333 128MB Memory (only for Cinema II Deluxe)

Support Full HD HDMI Technology

Support Hybrid CrossFireX

Dual independent displays support with HDMI/DVI and D-Sub

Audio Realtek 8-channel audio chip

High Denition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

Support Jack-Sensing function

LAN Realtek 10/100/1000Mb/s LAN chip

Expansion Slots 1 x PCI Express x16 slot

2 x PCI Express x1 slots

1 x PCI slot

Onboard Serial ATA 4 x SATA connectors

1 x ESATA connector

300MB/s data transfer rate

Support hot plug and NCQ (Native Command Queuing )

USB Support hot plug

Support up to 12 x USB 2.0 ports (6 rear panel ports, 3 onboard USB

headers supporting 6 extra ports)

Support USB 2.0 protocol up to 480Mb/s

Internal Connectors 1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

4 x SATA connectors

1 x ESATA connector

3 x USB 2.0 connectors (supporting 6 x USB devices)

1 x CPU fan header (4-pin)

1 x System fan header (3-pin)

1 x Front panel connector

1 x CD_IN connector

1 x Front Audio connector

1 x 1394a connector (only for Cinema II Deluxe)

1 x IrDA connector

1 x Chassis intrusion alarm header (INTR)

1 x Speaker connector

1 x COM1 connector

Back Panel 1 x PS/2 port

Connectors 1 x Optical S/PDIF_OUT port

1 x VGA port

1 x HDMI port

1 x DVI-D port

6 x USB 2.0 ports

1 x RJ-45 LAN port

1 x 1394a port (only for Cinema

II Deluxe)

8-channel Audio ports

Hardware Monitor System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

CPU overheating warning

CPU/System fan speed control

PCI Express x1 Support 250MB/s (500MB/s concurrent) bandwidth

Low power consumption and power management features

PCI Express x16 Support 8GB/s (16GB/s concurrent) bandwidth

Low power consumption and power management features

Green Function Support ACPI (Advanced Conguration and Power Interface)

Support S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4

(suspend to disk), and S5 (soft - off)

Bundled Software FOX ONE

FOX LiveUpdate

FOX LOGO

FOX DMI

Operating System Support for Microsoft® Windows® Vista/XP only

Form Factor Micro ATX Form Factor, 9.6 inches x 9.6 inches (24.4cm x 24.4cm)

The chipset driver of this motherboard does not support Windows® 2000.

1-2 Layout

Note : The above motherboard layout is for reference only, please refer to the physical mother-

board for detail.

1816

1. 8-pin ATX 12V Power Connector

2. North Bridge: AMD 785G

3. PCI Express x16 Slots

4. PCI Express x1 Slots

5. PCI Slots

6. CD_IN Connector

7. Front Audio Connector

8. SPDIF_OUT Connecter

9. COM1 Connector

10. 1394a Connector (only for Cinema

II Deluxe)

11. Front USB Connectors

12. Front Panel Connector

13. ESATA Connector

14. Clear CMOS Jumper

15. SATA Connectors

16. System Fan Header

17. Chassis Intrusion Alarm Header

18. 24-pin ATX Power Connector

19. Speaker Connector

20. IrDA Connector

21. DDR3 DIMM Slots

22. South Bridge: AMD SB710

23. CPU Socket

24. CPU_FAN Header

1413

1-3 Back Panel Connectors

1. PS/2 Port

Use the PS/2 port (purple) to connect a PS/2 keyboard or mouse.

2. USB Ports

The USB ports support the USB 2.0/1.1 specication. Use these ports for USB devices such as an USB keyboard/mouse, USB printer, USB ash drive and etc.

3. VGA Port

To connect with external display devices, such as monitor or LCD display.

4. DVI-D Port

The DVI-D port supports DVI-D specication. Connect a monitor that supports DVI-D connection

to this port.

5. HDMI Port

The HDMI (High-Denition Multimedia Interface) provides an all-digital audio/video interface to

transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI audio/video to this port. The HDMI Technology can support a maximum resolution of 1920x1080p, but the actual resolutions supported depend on the monitor being used.

6. Optical S/PDIF Out Port

This port provides digital audio out to an external audio system that supports digital optical audio.

7. 1394a Port (only for Cinema II Deluxe)

This port is used to connect a 1394a device.

8. RJ-45 LAN Port

The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate.

USB Ports

LAN PortVGA PortPS/2 Port

Audio Ports

Line Out

Microphone

Subwoofer

Rear Speaker

Side Speaker

Line In

DVI-D Port

USB Ports HDMI Port

Optical S/PDIF Out Port

1394a Port

LAN Type

Left: Active Right: Link

Status Description Status Description

1000M

Off No Link Off No Link

Green

Blinking

Data Activity

Off 10Mb/s Connection

Green 100Mb/s Connection

Orange 1000Mb/s Connection

Link

LED

Active

LED

9. Audio Ports

For the denition of each audio port, please refer to the table below :

Port 2-channel 4-channel 5.1-channel 7.1-channel

Blue Line In Line In Line In Line In

Green Line Out Front Speaker Out Front Speaker Out Front Speaker Out

Pink Microphone In Microphone In Microphone In Microphone In

Orange - - Center/Subwoofer Out Center/Subwoofer Out

Black - Rear Speaker Out Rear Speaker Out Rear Speaker Out

Grey - - - Side Speaker Out

This chapter introduces the hardware installation process, including

the installation of the CPU, memory, power supply, slots, pin headers

and the mounting of jumpers. Caution should be exercised during

the installation of these modules. Please refer to the motherboard

layout prior to any installation and read the contents in this chapter

carefully.

This chapter includes the following information :

■ Install the CPU and CPU Cooler

■ Install the Memory

■ Install an Expansion Card

■ Install other Internal Connectors

■ Jumpers

Please visit the following website for more supporting information about your

motherboard.

CPU Support List:

http://www.foxconnsupport.com/cpusupportlist.aspx

Memory, VGA Compatibility List:

http://www.foxconnsupport.com/complist.aspx

2-1 Install the CPU and CPU Cooler

Install the CPU

Locate the Pin-1 CPU triangle mark and the Pin-1 of the CPU socket.

Pin-1 triangle

marking of CPU

Pin-1 corner of the

CPU socket

1. Release the CPU socket lever.

2. Align Pin-1 of the CPU with the CPU

socket, and gently put the CPU

onto the socket.

Read the following guidelines before you begin to install the CPU :

■ Make sure that the motherboard supports the CPU.

■ Always turn off the computer and unplug the power cord from the power supply before

installing the CPU to prevent hardware damage.

■ Locate the Pin-1 of the CPU. The CPU cannot be inserted if oriented incorrectly.

■ Apply an even and thin layer of thermal grease on the surface of the CPU.

■ Do not turn on the computer if the CPU cooler is not installed, otherwise overheating

and damage of the CPU may occur.

■ Set the CPU host frequency in accordance with the CPU specications. It is not

recommended that the system bus frequency be set beyond hardware specications

since it does not meet the standard requirements for the peripherals. If you want to

set the frequency beyond the standard specications, please do so according to your

hardware specications including the CPU, graphics card, memory, hard drive, etc.

3. When CPU is properly seated,

push the CPU socket lever back

to its locked position.

Install the CPU Cooler

Follow the steps below to correctly install the CPU cooler. (The following procedures use Foxconn cooler as the example.)

1. Apply and spread an even thermal

grease on the surface of CPU.

2. Buckle the heatsink rmly at one side of the stand.

3. Buckle the heatsink at another

side, and press the fasten lever

down to tightly seat the cooler.

4. Attach the 3-wire CPU cooler

connector to the CPU fan header

on the motherboard .

Use extreme care when removing the CPU cooler because the thermal grease may adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.

2-2 Install the Memory

Dual Channel Memory Conguration

This motherboard provides four DDR3 memory sockets and supports Dual Channel Technology.

When memory is installed, the BIOS will automatically check the memory in your system.

Four DDR3 memory sockets are divided into two channels :

Channel 0 : DIMM1, DIMM3

Channel 1 : DIMM2, DIMM4

The combinations of DIMM modules are :

It is recommended that memory of the same capacity, brand, speed, and chips be

used and please select dual channel rst to achieve optimum performance.

Read the following guidelines before you begin to install the memory :

■ Make sure that the motherboard supports the memory. It is recommended that memory

of the same capacity, brand, speed, and chips be used.

■ Always turn off the computer and unplug the power cord from the power outlet before

installing the memory to prevent hardware damage.

■ Memory modules have a foolproof design. A memory module can be installed in only

one direction. If you are unable to insert the memory, switch the direction.

DIMM1 DIMM2 DIMM3 DIMM4

Single Channel DS/SS - - -

Single Channel DS/SS - DS/SS -

Single Channel - DS/SS - -

Single Channel - DS/SS - DS/SS

Dual Channel DS/SS DS/SS - -

Dual Channel - - DS/SS DS/SS

Dual Channel DS/SS DS/SS DS/SS DS/SS

(DS : Dual Side, SS : Single Side, - : No Memory)

Installing a Memory

If you take a look at front side of memory module, it has asymmetric pin counts on both sides separated

by a notch in the middle, so it can only t in one direction. Follow the steps below to correctly install

your memory modules into the sockets.

Step 1: Spread the clips at both ends of the memory socket. Place the memory module onto the socket, then put

your ngers on top edge of the module, and push it down rmly and seat it vertically into the memory

socket.

Step 2: The clips at both ends of the socket will snap into place when the memory module is securely inserted.

Before installing a memory module, make sure to turn off the computer and unplug the

power cord from the power outlet to prevent damage to the memory module. Be sure

to install DDR3 DIMMs on this motherboard.

Notch

144-Pin96-Pin

2-3 Install an Expansion Card

Follow the steps below to correctly install your expansion card in the expansion slot.

1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis

back panel.

2. Align the card with the slot, and press down on the card until it is fully seated in the slot.

3. Make sure the metal contacts on the card are completely inserted into the slot.

4. Secure the card's metal bracket to the chassis back panel with a screw.

5. After installing all expansion cards, replace the chassis cover.

6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for

your expansion card(s).

7. Install the driver provided with the expansion card in your operating system.

Installing and Removing a PCI Express x16 Graphics Card :

• Installing a Graphics Card:

Gently insert the graphics card into the PCI Express x16 slot.

Make sure the graphics card is locked by the latch at the end of

the PCI Express x16 slot.

• Removing the Card:

Push the latch at the end of the PCI Express x16 slot to release the card and then pull the card straight up from the slot.

PCI

PCI Express x1

PCI Express x16

■ Make sure the motherboard supports the expansion card. Carefully read the manual

that came with your expansion card.

■ Always turn off the computer and unplug the power cord from the power outlet before

installing an expansion card to prevent hardware damage.

2-4 Install other Internal Connectors

Power Connectors

This motherboard uses an ATX power supply. In order not to damage any device, make sure all the devices have been installed properly before applying the power supply.

24-pin ATX power connector : PWR1

PWR1 is the ATX power supply connector. Make sure that the power supply cable and pins are properly aligned with the connector on the motherboard. Firmly plug the power supply cable into the connector and make sure it is secure.

8-pin ATX 12 V Power Connector : PWR2

The 8-pin ATX 12V power supply connects to PWR2 and provides power to the CPU.

We recommend you using a 24-pin power supply.

If you are using a 20-pin power supply, you need to align the ATX power connector according to the picture.

20-Pin Power

Pin No. 24

Pin # Denition Pin # Denition

1 3.3V 13 3.3V

2 3.3V 14 -12V

3 GND 15 GND

4 +5V 16 PS_ON(Soft On/Off)

5 GND 17 GND

6 +5V 18 GND

7 GND 19 GND

8 Power Good 20 NC

9 +5V SB(Stand by +5V) 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 3.3V 24 GND

PWR1

Pin # Denition Pin # Denition

1 GND 5 +12V

2 GND 6 +12V

3 GND 7 +12V

4 GND 8 +12V

PWR2

GND

+12V

Front Panel Connector : FP1

This motherboard includes one connector for connecting the front panel switch and LED Indicators.

Hard Disk LED Connector (HDD-LED)

Connect to the chassis front panel IDE indicator LED. It indicates the active status of the hard disks. This 2-pin connector is directional with +/- sign.

Reset Switch (RESET-SW)

Attach the connector to the Reset switch on the front panel of the case; the system will restart when the switch is pressed.

Power LED Connector (PWR-LED)

Connect to the power LED indicator on the front panel of the chassis. The Power LED indicates the system’s status. When the system is in operation (S0 status), the LED is on. When the system gets into sleep mode (S1) , the LED

is blinking; When the system is in S3/S4 sleep state or power off mode (S5), the LED is off. This 2-pin connector

is directional with +/- sign.

Power Switch Connector (PWR-SW)

Connect to the power button on the front panel of the chassis. Push this switch allows the system to be turned on and off rather than using the power supply button.

Chassis Intrusion Alarm Header : INTR

The connector can be connected to a security switch on the chassis. The system can detect the chassis intrusion through the function of this connector. If eventually the chassis was closed, the system will send a message out.

Speaker Connector : SPEAKER

The speaker connector is used to connect speaker of the chassis.

EMPTY

HDD-LED

RESET-SW

PWR-SW

PWR-LED

FP1

Connect a 4-pin

power plug

SPKJ

EMPTY

SPEAKER

SPKJ

1 2 3

INTR

GND

INTRUDERJ

We recommend you using an 8-pin ATX 12V power supply. If

you are using a 4-pin power supply, you need to align the ATX

power connector according to the picture on the right.

COM Connector : COM1

This motherboard supports one serial RS232 COM port for legacy compatibility. User must purchase another RS232 cable with a 9-pin D-sub connector at one end to connect with the external RS232 device and another end with 10-

pin female connector to connect with COM1 connector in the motherboard.

1394a Connector : F_1394 (only for Cinema II

Deluxe)

The 1394a expansion cable can be connected to either

the front (provided that the front panel of your chassis is equipped with the appropriate interface) or real panel of

the chassis.

IrDA Connector : IR

This connector supports infrared wireless transmitting and receiving device.

USB Connectors : F_USB1/2/3

In addition to the six USB ports on the rear panel, this product also provides three 10-pin USB headers on its motherboard. By connecting through USB cables with them, user can quickly expand another six USB ports on the front panel.

GND

5V_DUAL

D+

D-

D+

GND

D-

5V_DUAL

EMPTY

F_USB 1/2/3

Serial ATA Connectors : SATA_1/2/3/4

The Serial ATA connector is used to connect with SATA Hard Disk or CD devices which supporting this feature. The current Serial ATA II interface allows up to 300MB/s data transfer rate.

+5V

EMPTY

IRRX

GND

IRTX

RLSD

SOUT

GND

RTS

DSR

DTR

CTS

EMPTY

SIN

COM1

GND

+12V

TPA-

TPB-

GND TPB+ +12V

GND

TPA+

EMPTY

F_1394

SATA_1/2/3/4

GND

TX+

TX-

GND

RX-

RX+

GND

Audio Connector : CD_IN

CD_IN is a Sony standard audio connector, it can be connected to a CD/DVD-ROM drive through a CD/DVD audio cable.

Audio Connector : F_AUDIO

The audio connector supports HD Audio standard. It provides the Front Audio output choice.

S/PDIF Out Connector : SPDIF_OUT

The connector is used for S/PDIF output.

Fan Headers : CPU_FAN, SYS_FAN,

FAN1, FAN2

There are ve main fan headers on this motherboard.

The fan speed can be controlled and monitored in “PC Health Status” section of the BIOS Setup. These fans can be automatically turned off after the system enters

S3, S4 and S5 sleeping states.

FAN1/2

GND +12V SENSE

CPU_FAN

GND POWER SENSE

CONTROL

SYS_FAN

GND +12V SENSE

CD_IN

CD_L GND CD_R

PORT1_L

PORT1_R

PORT2_L

SENSE_SEND

SENSE1_RETURN

PRESENCE_J

EMPTY SENSE2_RETURN

AUD_GND

1 2

109

F_AUDIO

PORT2_R

SPDIF_OUT

+5V

EMPTY

SPDIF_OUT

GND

2-6 Jumpers

For some features needed, users can change the jumper settings on this motherboard to modify them. This section explains how to use the various functions of this motherboard by changing the jumper settings. Users should read the following content carefully prior to modifying any jumper setting.

Description of Jumpers

1. For any jumper on this motherboard, pin 1 can be identied by the bold silkscreen next to it.

However, in this manual, pin 1 is simply labeled as “1”.

2. The following table explains different types of the jumper settings. "Closed" means placing a jumper

cap on the two pins to temporarily short them. The shorting can also be done by touching two

pins by a screwdriver for a few seconds, but using jumper cap is recommended. It can prevent

hazardous ESD (Electrical Static Discharge) problem.

Clear CMOS Jumper: CLR_CMOS

The motherboard uses CMOS RAM to store the basic hardware information (such as BIOS data,

date, time information, hardware password...etc.). Clear CMOS data is the fast way to go back to

factory default when the BIOS settings were mistakenly modied.

The steps to clear CMOS data are :

1. Turn off the computer, unplug the power cord from the power outlet.

2. Remove jumper cap from pins 2-3, put it onto pins 1-2 to short them. This will clear CMOS

data.

3. Return the setting to its original with pins 2-3 closed.

4. Plug in the power cord to your computer and turn it on.

5. Go to BIOS Setup to congure new system as described in next chapter.

Clear

Normal (Default)

CLR_CMOS

Jumper Diagram Denition Description

1-2 Set Pin 1 and Pin 2 closed

2-3 Set Pin 2 and Pin 3 closed

Closed Set two pins closed

Opened Set two pins opened

Since BIOS could be updated some other times, the BIOS information described

in this manual is for reference only. We do not guarantee the content of this

manual will remain consistent with the newly released BIOS at any given time in

the future. Please visit our website for updated manual if it is available.

This chapter tells how to change system settings through the BIOS

Setup menus. Detailed descriptions of the BIOS parameters are

also provided.

You have to run the Setup Program when the following cases oc-

cur:

1. An error message appears on the screen during the system

Power On Self Test (POST) process.

2. You want to change the default CMOS settings.

This chapter includes the following information :

■ Enter BIOS Setup

■ Main Menu

■ System Information

■ Boot Setting Conguration

■ Advanced Chipset Features

■ Integrated Peripherals

■ Power Management

■ Hardware Monitor

■ Overclock Control Center

■ BIOS Security Features

■ Load Optimal Defaults

■ Save & Exit Setup

■ Exit without Saving

Enter BIOS Setup

The BIOS is the communication bridge between hardware and software, correctly setting up the BIOS parameters is critical to maintain optimal system performance. Power on the computer, when show the post logo, you can press <DEL> key to enter SETUP.

Main Menu

The main menu allows you to select from a list of setup functions together with two exit choices.

Use the arrow keys to select a specic item and press <Enter> to go to the submenu.

Each item in the main menu is explained below:

► System Information

It displays the basic system conguration, such as BIOS ID, CPU Name, memory size plus

system date, and time. They all can be viewed or set up through this menu.

► Boot Setting Conguration

The advanced system features can be set up through this menu. There are boot up settings.

► Advanced Chipset Features

The values for the chipset can be changed through this menu, and the system performance

can be optimized.

► Integrated Peripherals

All onboard peripherals can be set up through this menu. There are SATA devices, Super I/O

devices such as Serial I/O and other USB devices... etc.

► Power Management Setup

All the items related with Green function features can be set up through this menu.

► Overclock Control Center

We do not suggest that you change the default values in the BIOS Setup, and we shall not be responsible for any damage which resulted from the change you made.

► System Information ► Overclock Control Center

► Boot Setting Conguration ► BIOS Security Features

► Advanced Chipset Features Load Optimal Defaults

► Integrated Peripherals Save & Exit Setup

► Power Management Setup Exit without Saving

► Hardware Monitor

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

Basic CMOS Configuration

► System Information

Some special proprietary features (such as overclocking) can be set up through this menu.

► Hardware Monitor

This setup enables you to read/change Fan speeds, and displays temperatures and voltages

of your CPU/System.

► BIOS Security Features

The Supervisor/User password can be set up through this menu to prevent unauthorized use

of your computer. If you set a password, the system will ask you to key in correct password

before boot or access to Setup.

► Load Optimal Defaults

The optimal performance settings can be loaded through this menu. However, it may offer bet-

ter performance in some ways (such as less I/O cards, less memory ...etc.), still, it may cause

problem if you have more memory or I/O cards installed. It means, if your system loading is

heavy, set to optimal default may sometimes come out an unstable system. What you need

now is to adjust BIOS setting one by one, trial and error, to nd out the best setting for your

current system.

► Save & Exit Setup

Save setting values to CMOS and exit.

► Exit Without Saving

Do not change anything and exit the setup.

System Information

This sub-menu is used to set up the standard BIOS features, such as the date, time, oppy drive

and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change

the setting.

► Time (hh:mm:ss)

This item allows you to congure the desired time. Use [ENTER] to enter the setting, then use

[TAB] to move forward a eld. Use [+] or [-] to input the value.

The three elds of the setting are <hour> : <minute> : <second> respectively.

► Date (mm:dd:yy)

<weekday><month><date> <year> format.

Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read

Only).

Month—month from 1 to 12.

Date—date from 1 to 31.

Year—year, set up by users.

Use [ENTER], [TAB] or [SHIFT-TAB] to select a eld. Use [+] or [-] to input the value.

► SATA Port 1 / SATA Port 2 / SATA Port 3 / SATA Port 4 / eSATA Port

When OnChip SATA Type is set to [Native IDE], while entering setup, BIOS automatically

detects the presence of SATA devices.

SATA Port 1 is the lower SATA port of SATA1_SATA2 of the motherboard.

SATA Port 2 is the upper SATA port of SATA1_SATA2 of the motherboard.

SATA Port 3 is the lower SATA port of SATA3_SATA4 of the motherboard.

SATA Port 4 is the upper SATA port of SATA3_SATA4 of the motherboard.

E-SATA Port is on the motherboard.

► Halt On

This category determines whether or not the computer will stop if an error is detected during

powering up.

[All Errors] : All errors can result in system halt.

[All Errors But...] : All errors but keyboard or mouse can result in system halt. The halt condi-

System Information

System Time [11 : 59 : 49] Help Item System Date [Sun 04/26/2009] Use [Enter], [TAB] ► SATA Port 1

[Not Detected] or the a torrow keys to

► SATA Port 2

[Not Detected] select a eld.

► SATA Port 3

[Not Detected]

► SATA Port 4

[Not Detected] Use [+] or [-] to

► eSATA Port

[Not Detected] congure the system

time.

Halt On [All Errors, But ...]

Keyboard [Disabled] Mouse [Disabled]

System Overview

BIOS Information Mainboard Model : Cinema II

BIOS ID : 941F1P01

BIOS Build Date : 07/01/09

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors F9:Optimized Defaults

tion can be enabled/disabled in the next three settings.

► Keyboard

The system boot will not stop for a keyboard error if you enabled this item.

► Mouse

The system boot will not stop for a mouse error if you enabled this item.

► BIOS Information

It displays the mainboard model of this product, and the current BIOS ID/Build Date/ver-

sion. User can check this information and discuss with the field service people if a BIOS

upgrade is needed.

► Memory Information

This item displays the current memory size/memory tinings/memory clock/tCL/tRCD/tRP/tRAS.

The size is depending on how many memory modules were installed in your system before

powering on.

► tCL (CAS Latency)

The number of memory clocks it takes a DRAM to return data after the read CAS_L is assert-

ed depends on the memory clock frequency. The value that BIOS programs into the memory

controller is a function of the target clock frequency. The target clock frequency is determined

from the supported CAS latencies at given clock frequencies of each DIMM.

► tRCD (RAS-to-CAS Delay)

This item displays the delay time (in clock cycles) between the CAS# and RAS# strobe sig-

nals.

► tRP (Precharge Command Period)

This item displays the row precharge time (in clock cycles).

► tRAS (Active-to-Precharge Delay)

This item displays the minimum RAS# active time (in clock cycles).

► Subtimings Information

Press <Enter> to go to relative submenu.

► LAN Information

This item shows the onboard LAN MAC address.

Subtimings Information

► Subtimings

Press <Enter> to go to relative submenu.

► tRTP (Internal Read to Precharge Command Delay)

This time displays the delay time (in clock cycles) between read command and precharge

command.

► tRC (Active-to-Active/Auto-Refresh Command Period)

This item displays the row cycle time (in clock cycles). tRC = tRAS + tRP.

► tWR (Write Recovery)

This item displays the write recovery time (in clock cycles).

► tRRD (Active-to-Active of a Different Bank)

This item displays the delay time (in clock cycles) between the RAS# and RAS# strobe sig-

nals.

Subtimings Information

Subtimings DIMM1/3, DIMM2/4 Help Item

tRTP : 2-4 , N/A tRC : 33 , N/A

tWR : 10 , N/A

tRRD : 4 , N/A

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Color F9:Optimized Defaults

+ 84 hidden pages

Foxconn Cinema II Deluxe, Cinema II Series, Cinema II Premium User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual