Foxconn A9DA User Manual

A9DA Series Motherboard

User’s Manual

Statement:

This manual is the intellectual property of Foxconn, Inc. Although the information

in this manual may be changed or modied at any time, Foxconn does not obligate

itself to inform the user of these changes.

Trademark:

All trademarks are the property of their respective owners.

Version:

User’s Manual V1.0 for A9DA Series motherboard.

Symbol description:

Caution : refers to important information that can help you to use motherboard

better, and tells you how to avoid problems.

Warning : indicating a potential risk of hardware damage or physical injury

may exist.

WEEE:

The use of this symbol indicates that this product may not be treated as household

waste. By ensuring this product is disposed of correctly, you will help prevent potential

negative consequences for the environment and human health, which could other-

wise be caused by inappropriate waste handling of this product. For more detailed

information about recycling of this product, please contact your local city ofce, your

household waste disposal service or the shop where you purchased this product.

More information:

If you want more information about our products, please visit Foxconn’s

website: http://www.foxconnchannel.com

All trade names are registered trademarks of respective manufacturers listed.

All images are for reference only, please refer to the physical motherboard for specic features.

Declaration of conformity

HON HAI PRECISION INDUSTRY COMPANY LTD

66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,

TAIPEI HSIEN, TAIWAN, R.O.C.

declares that the product

Motherboard A9DA-S/A9DA

is in conformity with

(reference to the specication under which conformity is declared in

accordance with 89/336 EEC-EMC Directive)

■ EN 55022:1998/A2: 2003 Limits and methods of measurements of radio

disturbance characteristics of information technology equipment

■ EN 61000-3-2/:2000 Electromagnetic compatibility (EMC)

Part 3: Limits

Section 2: Limits for harmonic current emissions

(equipment input current <= 16A per phase)

■ EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)

Part 3: Limits

Section 2: Limits of voltage uctuations and icker in low

voltage supply systems for equipment with rated current <= 16A

■ EN 55024/A2:2003 Information technology equipment-Immunity

characteristics limits and methods of measurement

Signature : Place / Date : TAIPEI/2010

Printed Name : James Liang

Declaration of conformity

Trade Name: FOXCONN

Model Name: A9DA-S/A9DA

Responsible Party: PCE Industry Inc.

Address: 458 E. Lambert Rd.

Fullerton, CA 92835

Telephone: 714-738-8868

Facsimile: 714-738-8838

Equipment Classication: FCC Class B Subassembly

Type of Product: Motherboard

Manufacturer: HON HAI PRECISION INDUSTRY

COMPANY LTD

Address: 66 , CHUNG SHAN RD., TU-CHENG

INDUSTRIAL DISTRICT, TAIPEI HSIEN,

TAIWAN, R.O.C.

Supplementary Information:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions : (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Tested to comply with FCC standards.

Signature : Date : 2010

Installation Precautions

■ Electrostatic discharge (ESD) is the sudden and momentary electric current

that ows between two objects at different electrical potentials. Normally it

comes out as a spark which will quickly damage your electronic equipment.

Please wear an electrostatic discharge (ESD) wrist strap when handling

components such as a motherboard, CPU or memory.

■ Ensure that the DC power supply is turned off before installing or removing

CPU, memory, expansion cards or other peripherals. It is recommended to

unplug the AC power cord from the power supply outlet. Failure to unplug

the power supply cord may result in serious damage to your system.

Please carefully read the following procedures to install your computer :

■ It is suggested to select high-quality, certied fans in order to avoid damage

to the motherboard and CPU due to high temperature. Never turn on the

computer if the CPU fan is not properly installed.

■ We cannot guarantee that your system can operate normally when your

CPU is overclocked. Normal operation depends on the overclocking capac-

ity of your device.

■ If there is any, when connecting USB, audio, RS232 COM, IrDA or S/PDIF

cables to the internal connectors on the motherboard, make sure their

pinouts are matching with the connectors on the motherboard. Incorrect con-

nections might damage the motherboard.

■ When handling the motherboard, avoid touching any metal leads or connec-

tors.

■ If there is a PCI Express x16 graphics card installed in your system, we

recommend using a 24-pin ATX power supply to get the best performance.

■ Before turning on the power, please make sure the power supply AC input

voltage setting has been congured to the local standard.

■ To prevent damage to the motherboard, do not allow screws to come in contact

with the motherboard circuit or its components. Also, make sure there are no

leftover screws or metal components placed on the motherboard or within the

computer casing.

■ If you are uncertain about any installation steps or have a problem related to

the use of the product, please consult a certied computer technician.

TABLE OF CONTENTS

Chapter 1 Product Introduction

Product Specications ..............................................................................2

Layout.......................................................................................................4

Back Panel Connectors ............................................................................5

Chapter 2 Hardware Install

Install the CPU and CPU Cooler ..............................................................8

Install the Memory ..................................................................................10

Install an Expansion Card ......................................................................12

Install other Internal Connectors ............................................................13

Jumpers ..................................................................................................17

Chapter 3 BIOS Setup

Enter BIOS Setup ...................................................................................20

Main Menu..............................................................................................20

System Information ................................................................................22

Advanced BIOS Features.......................................................................24

Fox Central Control Unit .........................................................................26

Advanced Chipset Features ...................................................................32

Integrated Peripherals ............................................................................36

Power Management Setup .....................................................................40

PC Health Status ....................................................................................42

BIOS Security Features..........................................................................43

Load Optimal Defaults ............................................................................43

Save Changes and Exit ..........................................................................43

Discard Changes and Exit ......................................................................43

Chapter 4 CD Instruction

Utility CD content....................................................................................45

Install driver and utility ............................................................................46

FOX ONE

Main Page ........................................................................................48

CPU Control .....................................................................................52

Frequency Control ............................................................................54

Limit Setting......................................................................................55

Voltage Control .................................................................................57

Fan Control.......................................................................................58

FOX LiveUpdate

Local Update ....................................................................................59

Online Update ..................................................................................61

Congure .........................................................................................64

About & Help ....................................................................................66

FOX LOGO .............................................................................................67

FOX DMI ................................................................................................68

Chapter 5 RAID Conguration

RAID Conguration Introduction.............................................................71

Option ROM Utility ..................................................................................73

Create a RAID Driver Diskette ...............................................................75

RAID Enable in BIOS .............................................................................77

Select a RAID Array for Use ...................................................................77

Install a New Windows XP .....................................................................93

Setting Up a Non-Bootable RAID Array..................................................97

Appendix - ATI Hybrid CrossFire™ Technology .........................................103

Appendix - ATI CrossFire™ Technology .....................................................106

Technical Support :

Support

Website :

http://www.foxconnchannel.com

Support Website :

http://www.foxconnsupport.com

Worldwide online contact Support :

http://www.foxconnsupport.com/inquiry.aspx

CPU Support List :

http://www.foxconnsupport.com/cpusupportlist.aspx

Memory, VGA Compatibility List :

http://www.foxconnsupport.com/complist.aspx

Thank you for buying Foxconn A9DA Series motherboard. Foxconn

products are engineered to maximize computing power, providing

only what you need for break-through performance.

With advanced overclocking capability and a range of connectivity

features for today multi-media computing requirements, A9DA-S/

A9DA enables you to unleash more power from your computer.

This chapter includes the following information:

■ Product Specications

■ Layout

■ Back Panel Connectors

1-1 Product Specications

CPU

http://www.foxconnsupport.com/cpusupportlist.aspx

HyperTransport Up to 4800MT/s (HT3.0) for AM3 CPU

Chipset North Bridge: RS880D

South Bridge: SB850

Memory 4 x 240-pin DDR3 DIMMs

Support up to 16GB of system memory

Expansion Slots 2 x PCI Express x16 slots

2 x PCI Express x1 slots

2 x PCI slots

VGA Integrated ATI Radeon

SidePort Memory-DDR3 1333 128MB Memory (only for A9DA-S)

Support Full HD HDMI Technology

Support Hybrid CrossFire

Support CrossFire

Dual independent displays support with HDMI/DVI and D-Sub

Storage SB850 chipset:

- 5 x SATA 3.0 connectors

- 1 x ESATA connector

- 600MB/s data transfer rate

- Support RAID 0, 1, 5,10, RAID Ready and JBOD

- Support hot plug and NCQ (Native Command Queuing )

LAN Atheros AR8131M Gigabit LAN chip

Audio Realtek ALC888 audio chip:

- High Denition Audio

- 2/4/5.1/7.1-channel

- Support for S/PDIF Out

- Support Jack-Sensing function

IEEE 1394 VIA VT6308P/S chip

(only for A9DA-S) Up to 2 IEEE 1394a ports (1 rear panel port, 1 onboard header )

USB Support hot plug

Support up to 14 x USB 2.0 ports (6 rear panel ports, 4 onboard USB

headers supporting 8 extra ports)

Support USB 2.0 protocol up to 480Mb/s

Support AM3 socket processors, Max processor power up to 140W

For the latest CPU information,

Dual channel DDR3 1600(oc*)/1333/1066 MHz architecture(oc*: overclocking)

Support DirectX 10.1, Shader Model 4.1, Universal Video Decoder (UVD) 2.0

please visit：

HD4290 GPU

(Continued on the next page)

Internal Connectors 1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

5 x SATA connectors

1 x ESATA connector

4 x USB 2.0 connectors (supporting 8 x USB devices)

1 x CPU fan header (4-pin)

1 x System fan header (4-pin)

1 x NB fan header (4-pin)

1 x Front panel connector

1 x CD_IN connector

1 x Front Audio connector

1 x 1394a connector (only for A9DA-S)

1 x Speaker connector

1 x COM1 connector

Back Panel 1 x PS/2 Keyboard port

Connectors 1 x Optical S/PDIF_OUT port

1 x VGA port

1 x HDMI port

1 x DVI-D port

6 x USB 2.0 ports

1 x RJ-45 LAN port

1 x 1394a port (only for A9DA-S)

8-channel Audio ports

Hardware Monitor System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

CPU overheating warning

CPU/System fan speed control

PCI Express x1 Support 250MB/s (500MB/s concurrent) bandwidth

Low power consumption and power management features

PCI Express x16 Support 8GB/s (16GB/s concurrent) bandwidth

Low power consumption and power management features

Green Function Support ACPI (Advanced Conguration and Power Interface)

Support S0 (normal), S1 (power on suspend), S3 (suspend to RAM),

S4 (suspend to disk), S5 (soft - off)

Bundled Software FOX ONE

FOX LiveUpdate

FOX LOGO

FOX DMI

Operating System Support for Microsoft® Windows® 7/Vista/XP

Form Factor ATX Form Factor, 12 inches x 9.6 inches (30.5cm x 24.4cm)

1-2 Layout

15 17

1614

1. CPU_FAN Header

2. NB_FAN Header

3. PCI Express x16 Slots

4. PCI Express x1 Slots

5. PCI Slots

6. CD_IN Connector

7. Front Audio Connector

8. 1394a Connector (only for A9DA-S)

9. System Fan Header

10. Front USB Connectors

11. Reset Button (only for A9DA-S)

12. Power on Button (only for A9DA-S)

13. Front Panel Connector

14. COM1 Connector

15. Speaker Connector

16. SATA Connectors

17. Clear CMOS Button

18. 24-pin ATX Power Connector

19. DDR3 DIMM Slots

20. South Bridge: AMD SB850

21. CPU Socket

22. North Bridge: RS880D

23. 8-pin ATX 12V Power Connector

Note : The above motherboard layout is for reference only, please refer to the physical mother-

board for detail.

1-3 Back Panel Connectors

PS/2 Keyboard Port

USB Ports HDMI Port

DVI-D Port

Optical S/PDIF Out Port

1394a Port

LAN PortVGA Port

USB Ports

Line Out

Line In

Rear Speaker

Subwoofer

Side Speaker

Microphone

Audio Ports

1. PS/2 Keyboard Port Use the PS/2 port (purple) to connect a PS/2 keyboard.

2. USB Port

The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as an USB keyboard/mouse, USB printer, USB ash drive and etc.

3. VGA Port

To connect with external display devices, such as monitor or LCD display.

4. DVI-D Port

The DVI-D port supports DVI-D specication. Connect a monitor that supports DVI-D connection

to this port.

5. HDMI Port

The HDMI (High-Denition Multimedia Interface) provides an all-digital audio/video interface to

transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI au-

dio/video to this port. The HDMI Technology can support a maximum resolution of 1920x1080p,

but the actual resolutions supported depend on the monitor being used.

6. Optical S/PDIF Out Port

This port provides digital audio out to an external audio system that supports digital optical audio.

7. 1394a Port ( only for A9DA-S)

This port is used to connect a 1394a device.

8. RJ-45 LAN Port

The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate.

LAN Type

1000M

Left: Active Right: Link

Status Description Status Description

Off No Link Off No Link

Green

Blinking

Data Activity

Off 10Mb/s Connection

Green 100Mb/s Connection

Orange 1000Mb/s Connection

Active

LED

Link

LED

9. Audio Ports

For the denition of each audio port, please refer to the table below :

Port 2-channel 4-channel 5.1-channel 7.1-channel

Blue Line In Line In Line In Line In

Green Line Out Front Speaker Out Front Speaker Out Front Speaker Out

Pink Microphone In Microphone In Microphone In Microphone In

Orange - - Center/Subwoofer Out Center/Subwoofer Out

Black - Rear Speaker Out Rear Speaker Out Rear Speaker Out

Grey - - - Side Speaker Out

This chapter introduces the hardware installation process, including

the installation of the CPU, memory, power supply, slots, pin headers

and the mounting of jumpers. Caution should be exercised during

the installation of these modules. Please refer to the motherboard

layout prior to any installation and read the contents in this chapter

carefully.

This chapter includes the following information :

■ Install the CPU and CPU Cooler

■ Install the Memory

■ Install an Expansion Card

■ Install other Internal Connectors

■ Jumpers

Please visit the following website for more supporting information about your

motherboard.

CPU Support List:

http://www.foxconnsupport.com/cpusupportlist.aspx

Memory, VGA Compatibility List:

http://www.foxconnsupport.com/complist.aspx

2-1 Install the CPU and CPU Cooler

Read the following guidelines before you begin to install the CPU :

■ Make sure that the motherboard supports the CPU.

■ Always turn off the computer and unplug the power cord from the power supply before

Install the CPU

Locate the Pin-1 CPU triangle mark and the Pin-1 of the CPU socket.

installing the CPU to prevent hardware damage.

■ Locate the Pin-1 of the CPU. The CPU cannot be inserted if oriented incorrectly.

■ Apply an even and thin layer of thermal grease on the surface of the CPU.

■ Do not turn on the computer if the CPU cooler is not installed, otherwise overheating

and damage of the CPU may occur.

■ Set the CPU host frequency in accordance with the CPU specications. It is not

recommended that the system bus frequency be set beyond hardware specications

since it does not meet the standard requirements for the peripherals. If you want to

set the frequency beyond the standard specications, please do so according to your

hardware specications including the CPU, graphics card, memory, hard drive, etc.

1. Release the CPU socket lever.

Pin-1 corner of the

CPU socket

2. Align Pin-1 of the CPU with the CPU

socket, and gently put the CPU

onto the socket.

Pin-1 triangle

marking of CPU

3. When CPU is properly seated,

push the CPU socket lever back

to its locked position.

Install the CPU Cooler

Follow the steps below to correctly install the CPU cooler. (The following procedures use Foxconn cooler as the example.)

1. Apply and spread an even thermal

grease on the surface of CPU.

2. Buckle the heatsink rmly at one

side of the stand.

3. Buckle the heatsink at another

side, and press the fasten lever

down to tightly seat the cooler.

Use extreme care when removing the CPU cooler because the thermal grease may adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.

4. Attach t he 3-wire C PU cooler

connector to the CPU fan header

on the motherboard .

2-2 Install the Memory

Read the following guidelines before you begin to install the memory :

■ Make sure that the motherboard supports the memory. It is recommended that memory

Dual Channel Memory Conguration

This motherboard provides four DDR3 memory sockets and supports Dual Channel Technology.

When memory is installed, the BIOS will automatically check the memory in your system.

Four DDR3 memory sockets are divided into two channels :

Channel 0 : DIMM1, DIMM3

Channel 1 : DIMM2, DIMM4

The combinations of DIMM modules are :

of the same capacity, brand, speed, and chips be used.

■ Always turn off the computer and unplug the power cord from the power outlet before

installing the memory to prevent hardware damage.

■ Memory modules have a foolproof design. A memory module can be installed in only

one direction. If you are unable to insert the memory, switch the direction.

DIMM1 DIMM2 DIMM3 DIMM4

Single Channel DS/SS - - -

Single Channel DS/SS - DS/SS -

Single Channel - DS/SS - -

Single Channel - DS/SS - DS/SS

Dual Channel DS/SS DS/SS - -

Dual Channel - - DS/SS DS/SS

Dual Channel DS/SS DS/SS DS/SS DS/SS

(DS : Dual Side, SS : Single Side, - : No Memory)

It is recommended that memory of the same capacity, brand, speed, and chips be

used and please select dual channel rst to achieve optimum performance.

Installing a Memory

Before installing a memory module, make sure to turn off the computer and unplug the

power cord from the power outlet to prevent damage to the memory module. Be sure

to install DDR3 DIMMs on this motherboard.

144-Pin96-Pin

Notch

If you take a look at front side of memory module, it has asymmetric pin counts on both sides separated

by a notch in the middle, so it can only t in one direction. Follow the steps below to correctly install

your memory modules into the sockets.

Step 1: Spread the clips at both ends of the memory socket. Place the memory module onto the socket, then put

your ngers on top edge of the module, and push it down rmly and seat it vertically into the memory

socket.

Step 2:

The clips at both ends of the socket will snap into place when the memory module is securely inserted.

2-3 Install an Expansion Card

■ Make sure the motherboard supports the expansion card. Carefully read the manual

that came with your expansion card.

■ Always turn off the computer and unplug the power cord from the power outlet before

installing an expansion card to prevent hardware damage.

PCI Express x1

PCI Express x16

PCI

Follow the steps below to correctly install your expansion card in the expansion slot.

1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis

back panel.

2. Align the card with the slot, and press down on the card until it is fully seated in the slot.

3. Make sure the metal contacts on the card are completely inserted into the slot.

4. Secure the card's metal bracket to the chassis back panel with a screw.

5. After installing all expansion cards, replace the chassis cover.

6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for

your expansion card(s).

7. Install the driver provided with the expansion card in your operating system.

Installing and Removing a PCI Express x16 Graphics Card :

• Installing a Graphics Card:

Gently insert the graphics card into the PCI Express x16 slot. Make

sure the graphics card is locked by the latch at the end of the PCI

Express x16 slot.

• Removing the Card:

Push the latch at the end of the PCI Express x16 slot to release the card and then pull the card straight up from the slot.

2-4 Install other Internal Connectors

Power Connectors

This motherboard uses an ATX power supply. In order not to damage any device, make sure all the devices have been installed properly before applying the power supply.

24-pin ATX power connector : PWR1

PWR1 is the ATX power supply connector. Make sure that the power supply cable and pins are properly aligned with the connector on the motherboard. Firmly plug the power supply cable into the connector and make sure it is secure.

Pin # Denition Pin # Denition

1 3.3V 13 3.3V

2 3.3V 14 -12V

3 GND 15 GND

4 +5V 16 PS_ON(Soft On/Off)

5 GND 17 GND

6 +5V 18 GND

7 GND 19 GND

8 Power Good 20 NC

9 +5V SB(Stand by +5V) 21 +5V

PWR1

We recommend you using a 24-pin power supply.

If you are using a 20-pin power supply, you need

to align the ATX power connector according to the picture.

8-pin ATX 12 V Power Connector : PWR2

The 8-pin ATX 12V power supply connects to PWR2 and provides power to the CPU.

10 +12V 22 +5V

11 +12V 23 +5V

12 3.3V 24 GND

Pin No. 24

20-Pin Power

+12V

PWR2

Pin # Denition Pin # Denition

GND

1 GND 5 +12V

2 GND 6 +12V

3 GND 7 +12V

4 GND 8 +12V

We recommend you using an 8-pin ATX 12V power supply. If you are using a 4-pin power supply, you need to align the ATX

power connector according to the picture on the right.

Fan Connectors : CPU_FAN, SYS_FAN,

NB_FAN

There are three main fan headers on this motherboard. The fan speed can be controlled and monitored in “PC Health Status” section of the BIOS Setup. These fans can be automatically turned off after the system enters

S3, S4 and S5 sleeping states.

Connect a 4-pin

power plug

GND POWER SENSE CONTROL

CPU_FAN/SYS_FAN/NB_FAN

Speaker Connector : SPEAKER

The speaker connector is used to connect speaker of the chassis.

SPKJ

EMPTY

SPKJ

SPEAKER

COM Connector : COM1

This motherboard supports one serial RS232 COM port

for legacy compatibility. User must purchase another

RS232 cable with a 9-pin D-sub connector at one end to connect with the external RS232 device and another

end with 10-pin female connector to connect with COM1

connector in the motherboard.

COM1

SIN

DTR

DSR

CTS

EMPTY

RLSD

SOUT

GND

RTS

Front Panel Connector : FP1

This motherboard includes one connector for connecting the front panel switch and LED Indicators.

Hard Disk LED Connector (HDD-LED)

Connect to the chassis front panel IDE indicator LED. It

indicates the active status of the hard disks. This 2-pin

connector is directional with +/- sign.

Reset Switch (RESET-SW)

Attach the connector to the Reset switch on the front panel of the case; the system will restart when the switch is pressed.

Power LED Connector (PWR-LED)

Connect to the power LED indicator on the front panel of the chassis. The Power LED indicates the system’s status. When the system is in operation (S0 status), the LED is on. When the system gets into sleep mode (S1) , the LED

is blinking; When the system is in S3/S4 sleep state or power off mode (S5), the LED is off. This 2-pin connector

is directional with +/- sign.

Power Switch Connector (PWR-SW)

Connect to the power button on the front panel of the chassis. Push this switch allows the system to be turned on and off rather than using the power supply button.

HDD-LED

RESET-SW

PWR-LED

PWR-SW

EMPTY

FP1

Serial ATA Connectors : SATA1_SATA2, SATA3_

SATA4, SATA5_ESATA

The Serial ATA connector is used to connect with SATA Hard Disk or CD devices which supporting this feature. The current Serial ATA III interface allows up to 600MB/s data transfer rate. Note: There will be an ESATA cable in the package, you can

use it to connect an ESATA hard disk to the upper SATA port

of SATA5_ESATA on the motherboard(as depicted).

ESATA

GND TX+ TXGND RXRX+

GND

SATA1_SATA2/SATA3_SATA4/

SATA5_ESATA

Audio Connector : CD_IN

CD_IN is a Sony standard audio connector, it can be connected to a CD/DVD-ROM drive through a CD/DVD

audio cable.

CD_L GND CD_R

CD_IN

Audio Connector : F_AUDIO

The audio connector supports HD Audio standard. It provides the Front Audio output choice.

PORT1_L

PORT1_R

PORT2_R

SENSE_SEND

PORT2_L

1 2

AUD_GND

PRESENCE_J SENSE1_RETURN EMPTY

SENSE2_RETURN

109

F_AUDIO

1394a Connector : F_1394

( only for A9DA-S )

The 1394a expansion cable can be connected to either

the front (provided that the front panel of your chassis is equipped with the appropriate interface) or real

panel of the chassis.

TPA+

GND

TPB+

+12V

EMPTY

TPAGND TPB-

+12V

GND

F_1394

USB Connectors : F_USB 1/2/3/4

In addition to the six USB ports on the rear panel, this product also provides four 10-pin USB headers on its motherboard. By connecting through USB cables with them, user can quickly expand another eight USB ports on the front panel.

VCC

DD+

GND

EMPTY

F_USB 1/2/3/4

VCC DD+

GND NC

2-5 Jumpers

For some features needed, users can change the jumper settings on this motherboard to modify them. This section explains how to use the various functions of this motherboard by changing the jumper settings. Users should read the following content carefully prior to modifying any jumper setting.

Description of Jumpers

1. For any jumper on this motherboard, pin 1 can be identied by the bold silkscreen next to it.

However, in this manual, pin 1 is simply labeled as “1”.

2. The following table explains different types of the jumper settings. "Closed" means placing a jumper

cap on the two pins to temporarily short them. The shorting can also be done by touching two

pins by a screwdriver for a few seconds, but using jumper cap is recommended. It can prevent

hazardous ESD (Electrical Static Discharge) problem.

Jumper Diagram Denition Description

1-2 Set Pin 1 and Pin 2 closed

2-3 Set Pin 2 and Pin 3 closed

Clear CMOS Jumper: CLR_CMOS

The motherboard uses CMOS RAM to store the basic hardware information (such as BIOS data, date, time information, hardware password...etc.). Clear CMOS data is the fast way to go back to

factory default when the BIOS settings were mistakenly modied.

The steps to clear CMOS data are :

1. Turn off the computer, unplug the power cord from the power outlet.

2. Remove jumper cap from pins 2-3, put it onto pins 1-2 to short them. This will clear CMOS

data.

3. Return the setting to its original with pins 2-3 closed.

4. Plug in the power cord to your computer and turn it on.

5. Go to BIOS Setup to congure new system as described in next chapter.

Clear

Normal (Default)

CLR_CMOS

■ Disconnect the power cable before adjusting the jumper settings.

■ Do not clear the CMOS while the system is turned on.

2-6 OnBoard Button (only for A9DA-S)

Power on Button: POWER_ON

Push the power on button to power on the system.

Reset Button: RESET

Push the reset button to reboot the system.

PWR_ON RST

This chapter tells how to change system settings through the BIOS

Setup menus. Detailed descriptions of the BIOS parameters are

also provided.

You have to run the Setup Program when the following cases oc-

cur:

1. An error message appears on the screen during the system

Power On Self Test (POST) process.

2. You want to change the default CMOS settings.

This chapter includes the following information :

■ Enter BIOS Setup

■ Main Menu

■ System Information

■ Advanced BIOS Features

■ Fox Central Control Unit

■ Advanced Chipset Features

■ Integrated Peripherals

■ Power Management Setup

■ PC Health Status

■ BIOS Security Features

■ Load Optimal Defaults

■ Save Changes and Exit

■ Discard Changes and Exit

Since BIOS could be updated some other times, the BIOS information described

in this manual is for reference only. We do not guarantee the content of this

manual will remain consistent with the newly released BIOS at any given time in

the future. Please visit our website for updated manual if it is available.

Enter BIOS Setup

The BIOS is the communication bridge between hardware and software, correctly setting up the BIOS parameters is critical to maintain optimal system performance. Power on the computer,

when the message "Press <DEL> to enter Setup, <ESC> to boot menu" appears at the bottom

of the screen, you can press <DEL> key to enter SETUP.

We do not suggest that you change the default values in the BIOS Setup, and we shall not be responsible for any damage which resulted from the change you made.

Main Menu

The main menu allows you to select from a list of setup functions together with two exit choices.

Use the arrow keys to select a specic item and press <Enter> to go to the submenu.

► System Information

► System Information ► PC Health Status

► Advanced BIOS Features ► BIOS Security Features

► Fox Central Control Unit Load Optimal Defaults

► Advanced Chipset Features Save Changes and Exit

► Integrated Peripherals Discard Changes and Exit

► Power Management Setup

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit

F1:General Help F9:Optimized Defaults

Configure Time and Date. Display System Information...

Each item in the main menu is explained below:

► System Information

It displays the basic system conguration, such as BIOS ID, CPU Name, memory size plus

system date, time and Floppy drive. They all can be viewed or set up through this menu.

► Advanced BIOS Features

The advanced system features can be set up through this menu. There are boot up settings.

► Fox Central Control Unit

Some special proprietary features (such as overclocking) can be set up through this menu.

► Advanced Chipset Features

The values for the chipset can be changed through this menu, and the system performance

can be optimized.

► Integrated Peripherals

All onboard peripherals can be set up through this menu. There are IDE devices, Super I/O

devices such as Serial I/O and other USB devices... etc.

► Power Management Setup

All the items related with Green function features can be set up through this menu.

► PC Health Status

This setup enables you to read/change Fan speeds, and displays temperatures and voltages

of your CPU/System.

► BIOS Security Features

The Supervisor/User password can be set up through this menu to prevent unauthorized use

of your computer. If you set a password, the system will ask you to key in correct password

before boot or access to Setup.

► Load Optimal Defaults

The optimal performance settings can be loaded through this menu. However, it may offer bet-

ter performance in some ways (such as less I/O cards, less memory ...etc.), still, it may cause

problem if you have more memory or I/O cards installed. It means, if your system loading is

heavy, set to optimal default may sometimes come out an unstable system. What you need

now is to adjust BIOS setting one by one, trial and error, to nd out the best setting for your

current system.

► Save Changes and Exit

Save setting values to CMOS and exit.

► Discard Changes and Exit

Do not change anything and exit the setup.

System Information

This sub-menu is used to set up the standard BIOS features, such as the date, time, oppy drive

and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change

the setting.

System Information

Date (mm:dd:yy) [Fri , 12/26/2009] Help Item Time (hh:mm:ss) [11 : 59 : 49] ► SATA Port 1 ► SATA Port 2 ► SATA Port 3 ► SATA Port 4

► SATA Port 5 ► eSATA Port

Date. Halt On [All Errors, But ...]

Keyboard [Disabled]

Mouse [Enabled]

Model Name :A9DA-S/A9DA

BIOS ID :994F1D12 BIOS Version : 08.00.15 Memory Size : 2048MB

MAC Address :00-00-00-00-00-00

CPU Name : AMD Phenom(tm) II X4 945 Processor

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F2/F3:Change Colors F9:Optimized Defaults

► Date (mm:dd:yy)

<weekday><month><date> <year> format.

Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read

Only).

Month—month from 1 to 12.

Date—date from 1 to 31.

Year—year, set up by users.

Use [ENTER], [TAB] or [SHIFT-TAB] to select a eld. Use [+] or [-] to input the value.

► Time (hh:mm:ss)

This item allows you to congure the desired time. Use [ENTER] to enter the setting, then use

[TAB] to move forward a eld. Use [+] or [-] to input the value.

The three elds of the setting are <hour> : <minute> : <second> respectively.

► SATA1 / SATA2 / SATA3 / SATA4 / SATA5 / E-SATA

When OnChip SATA Type is set to [Native IDE], while entering setup, BIOS automatically

detects the presence of SATA devices.

SATA1 is the lower SATA port of SATA1_SATA2 of the motherboard.

SATA2 is the upper SATA port of SATA1_SATA2.

SATA3 is the lower SATA port of SATA3_SATA4.

SATA4 is the upper SATA port of SATA3_SATA4.

SATA5 is the lower SATA port of SATA5_ESATA.

E-SATA is the upper SATA port of SATA5_ESATA.

► Halt On

This category determines whether or not the computer will stop if an error is detected during

powering up.

[Not Detected] Use [Enter], [TAB] [Not Detected] or [SHIFT-TAB] to [Not Detected] select a eld. [Not Detected] [Not Detected] Use [+] or [-] to [Not Detected] congure the system

[All Errors] : All errors can result in system halt.

[All Errors But...] : All errors but keyboard or mouse or oppy can result in system halt. The

halt condition can be enabled/disabled in the next three settings.

► Keyboard

The system boot will not stop for a keyboard error if you enabled this item.

► Mouse

The system boot will not stop for a mouse error if you enabled this item.

► Model Name

Model name of this product.

► BIOS ID / BIOS Version

It displays the current BIOS ID/version. User can check this information and discuss with the field service people if a BIOS upgrade is needed.

► Memory Size

This item displays the current memory size. The size is depending on how many memory mod-

ules were installed in your system before powering on.

► MAC Address

This item shows the onboard LAN MAC address.

► CPU Name

It displays the current CPU name.

+ 85 hidden pages