Foxconn A75M Series, A55M Series User Manual

A75M/A55M Series Motherboard

User’s Manual

Statement:

This manual is the intellectual property of Foxconn, Inc. Although the information

in this manual may be changed or modied at any time, Foxconn does not obligate

itself to inform the user of these changes.

Trademark:

All trademarks are the property of their respective owners.

Version:

User’s Manual V1.0 for A75M/A55M Series motherboard.

Symbol description:

Caution : refers to important information that can help you to use motherboard

better, and tells you how to avoid problems.

Warning : indicating a potential risk of hardware damage or physical injury

may exist.

WEEE:

The use of this symbol indicates that this product may not be treated as household

waste. By ensuring this product is disposed of correctly, you will help prevent potential

negative consequences for the environment and human health, which could other-

wise be caused by inappropriate waste handling of this product. For more detailed

information about recycling of this product, please contact your local city ofce, your

household waste disposal service or the shop where you purchased this product.

More information:

If you want more information about our products, please visit Foxconn’s

website: http://www.foxconnchannel.com

All trade names are registered trademarks of respective manufacturers listed.

All images are for reference only, please refer to the physical motherboard for specic features.

Declaration of conformity

HON HAI PRECISION INDUSTRY COMPANY LTD

66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,

TAIPEI HSIEN, TAIWAN, R.O.C.

declares that the product

Motherboard A75M/A55M

is in conformity with

(reference to the specication under which conformity is declared in

accordance with 89/336 EEC-EMC Directive)

■ EN 55022:1998/A2: 2003 Limits and methods of measurements of radio

disturbance characteristics of information technology equipment

■ EN 61000-3-2/:2000 Electromagnetic compatibility (EMC)

Part 3: Limits

Section 2: Limits for harmonic current emissions

(equipment input current <= 16A per phase)

■ EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)

Part 3: Limits

Section 2: Limits of voltage uctuations and icker in low

voltage supply systems for equipment with rated current <= 16A

■ EN 55024/A2:2003 Information technology equipment-Immunity

characteristics limits and methods of measurement

Signature : Place / Date : TAIPEI/2011

Printed Name : James Liang

Declaration of conformity

Trade Name: FOXCONN

Model Name:

A75M/A55M

Responsible Party: PCE Industry Inc.

Address: 458 E. Lambert Rd.

Fullerton, CA 92835

Telephone: 714-738-8868

Facsimile: 714-738-8838

Equipment Classication: FCC Class B Subassembly

Type of Product: Motherboard

Manufacturer: HON HAI PRECISION INDUSTRY

COMPANY LTD

Address: 66 , CHUNG SHAN RD., TU-CHENG

INDUSTRIAL DISTRICT, TAIPEI HSIEN,

TAIWAN, R.O.C.

Supplementary Information:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions : (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Tested to comply with FCC standards.

Signature : Date : 2011

Installation Precautions

Please carefully read the following procedures to install your computer :

■ It is suggested to select high-quality, certied fans in order to avoid damage

to the motherboard and CPU due to high temperature. Never turn on the

computer if the CPU fan is not properly installed.

■ We cannot guarantee that your system can operate normally when your

CPU is overclocked. Normal operation depends on the overclocking capac-

ity of your device.

■ If there is any, when connecting USB, audio, RS232 COM, IrDA or S/PDIF

cables to the internal connectors on the motherboard, make sure their

pinouts are matching with the connectors on the motherboard. Incorrect con-

nections might damage the motherboard.

■ When handling the motherboard, avoid touching any metal leads or connec-

tors.

■ If there is a PCI Express x16 graphics card installed in your system, we

recommend using a 24-pin ATX power supply to get the best performance.

■ Before turning on the power, please make sure the power supply AC input

voltage setting has been congured to the local standard.

■ To prevent damage to the motherboard, do not allow screws to come in contact

with the motherboard circuit or its components. Also, make sure there are no

leftover screws or metal components placed on the motherboard or within the

computer casing.

■ If you are uncertain about any installation steps or have a problem related to

the use of the product, please consult a certied computer technician.

■ Electrostatic discharge (ESD) is the sudden and momentary electric current

that ows between two objects at different electrical potentials. Normally it

comes out as a spark which will quickly damage your electronic equipment.

Please wear an electrostatic discharge (ESD) wrist strap when handling

components such as a motherboard, CPU or memory.

■ Ensure that the DC power supply is turned off before installing or removing

CPU, memory, expansion cards or other peripherals. It is recommended to

unplug the AC power cord from the power supply outlet. Failure to unplug

the power supply cord may result in serious damage to your system.

TABLE OF CONTENTS

Chapter 1 Product Introduction

Product Specications ..............................................................................2

Layout.......................................................................................................4

Back Panel Connectors ............................................................................5

Chapter 2 Hardware Install

Install the CPU and CPU Cooler ..............................................................8

Install the Memory ..................................................................................10

Install an Expansion Card ......................................................................12

Install other Internal Connectors ............................................................13

Jumpers ..................................................................................................17

Chapter 3 BIOS Setup

Enter BIOS Setup ...................................................................................19

Main Menu..............................................................................................19

System Information ................................................................................21

Advanced BIOS Features.......................................................................23

Fox Central Control Unit .........................................................................25

Advanced Chipset Features ...................................................................31

Integrated Peripherals ............................................................................35

Power Management Setup .....................................................................39

PC Health Status ....................................................................................41

BIOS Security Features..........................................................................43

Load Optimal Defaults ............................................................................44

Save Changes and Exit ..........................................................................44

Discard Changes and Exit ......................................................................44

Chapter 4 CD Instruction

Utility CD content....................................................................................46

Install driver and utility ............................................................................47

FOX ONE

Main Page ........................................................................................50

CPU Control .....................................................................................54

Frequency Control ............................................................................56

Limit Setting......................................................................................57

Voltage Control .................................................................................59

Fan Control.......................................................................................60

FOX LiveUpdate

Local Update ....................................................................................61

Online Update ..................................................................................63

Congure .........................................................................................66

About & Help ....................................................................................68

FOX LOGO .............................................................................................69

FOX DMI ................................................................................................70

Browser Conguration Utility .................................................................71

Chapter 5 RAID Conguration

RAID Conguration Introduction.............................................................74

Option ROM Utility ..................................................................................76

Create a RAID Driver Diskette ...............................................................78

RAID Enable in BIOS .............................................................................80

Select a RAID Array for Use ...................................................................80

Install a New Windows XP .....................................................................92

Setting Up a Non-Bootable RAID Array..................................................96

Technical Support :

Website :

http://www.foxconnchannel.com

Support Website :

http://www.foxconnsupport.com

Worldwide online contact Support :

http://www.foxconnsupport.com/inquiry.aspx

CPU Support List :

http://www.foxconnsupport.com/cpusupportlist.aspx

Memory, VGA Compatibility List :

http://www.foxconnsupport.com/complist.aspx

Support

Thank you for buying Foxconn A75M/A55M Series motherboard.

Foxconn products are engineered to maximize computing power,

providing only what you need for break-through performance.

With advanced overclocking capability and a range of connectivity

features for today multi-media computing requirements, A75M/A55M

enables you to unleash more power from your computer.

This chapter includes the following information:

■ Product Specications

■ Layout

■ Back Panel Connectors

(Continued on the next page)

1-1 Product Specications

CPU Support Husky Quad Core APU, Max processor power up to 100 W

For the latest CPU information,

please visit：

http://www.foxconnsupport.com/cpusupportlist.aspx

Chipset Hudson D3 co-lay D2(Default D3)

Memory 4 x 240-pin DDR3 DIMM sockets, Support up to 16GB of syste

memory

Dual channel DDR3 1866/1600/1333MHZ memory architecture

Expansion Slot 1 x PCI Express x16 slot

1 x PCI Express x 1 slot

2 x PCI bus slots

Storage Hudson D3 chipset(Co-lay Hudson D2 chipset)

- 6 x SATA 3.0 ports (Hudson D3 chipset)

- 6 x SATA2.0 ports(Hudson D2 chipset)

- SATA 2.0 support up to 300MB/s data transfer rate

- SATA 3.0 support up to 600MB/s data transfer rate

- Support RAID 0,1,10

- Support hot plug and NCQ (Native Command Queuing)

LAN Realtek RTL8112B Gigabit LAN chip

Audio Realtek ALC888 audio chip: (Co-lay Realtek ALC662 audio chip)

- High Denition Audio

- 2/4/7.1-channel(Co-lay 2/4/5.1-channel)

- Support for S/PDIF Out

- Support Jack-Sensing function

USB Hudson D3 chipset:

-Support up to 10 x USB 2.0 ports (6 rear panel ports, 2 onboard USB

headers supporting 4 extra ports)

-Support up to 4 x USB 3.0 ports(2 rear panel ports, 1 onboard USB

header supporting 2 extra ports)

Hudson D2 chipset:

-Support up to 10 x USB 2.0 ports (6 rear panel ports, 2 onboard USB

headers supporting 4 extra ports)

Support USB 2.0 protocol up to 480Mbps

Support USB 3.0 protocol up to 5Gbps

Support hot plug

Internal Connectors 1 x 24-Pin ATX main power connector

1 x 4-pin ATX 12V power connector

2 x CPU fan header (4-pin)

The chipset driver of this motherboard does not support Windows® 2000.

1 x system fan header (4-pin)

1 x CD-in connector

1 x Front panel connector

1 x Front Audio connector

1 x TPM connector

1 x LPT connector

1 x IR/CIR connector

1 x S/PDIF out connector

1 x Speaker header(Co-lay 1 x Buzzer conncetor)

6 x Serial ATA connectors

2 x USB 2.0 connectors

1 x USB 3.0 connectors(Hudson D3 chipset)

1 x Chassis intrusion alarm header

1 x COM connector

Back Panel

Connectors

1 x PS/2 keyboard port

1 x VGA port

1 x DVI port

1 x HDMI port

1 x RJ-45 LAN port

6-channel Audio ports(Co-lay 8-channel audio ports)

6 x USB 2.0 ports

2 x USB 3.0 ports(Hudson D3 chipset)

Hardware Monitor System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

CPU overheating warning

CPU/System fan speed control

PCI Express x16 Transfer rate per lane are 2.5GT/s for PCIe Gen 1 and 5GT/s for PCIe

Gen 2. Low power consumption and power management features

Green Function Support ACPI (Advanced Conguration and Power Interface)

Support S0 (normal), S3 (suspend to RAM), S4 (suspend to disk),

S5 (soft - off)

Support EuP function

Bundled Software FOX ONE

FOX LiveUpdate

FOX LOGO

FOX DMI

Operating System Support for Microsoft® Windows® 7/Vista/XP

Form Factor uATX Form Factor, 9.6 inches x 9.6 inches (24.4cm x 24.4cm)

1-2 Layout

1. 4-pin ATX 12V Power Connector

2. SYS_FAN Header

3. PCI Express Slots

4. PCI Slots

5. Front Audio Connector

6. CD_IN Connector

7. SPDIF-OUT Connector

8. Front USB 3.0 Connector

9. Clear CMOS Button

10.Front USB 2.0 Connectors

11.Speack Connector

12. Front Panel Connector

13. SATA Connectors

14. TPM connector

15. 24-pin ATX Power Connector

16. IrDA/CIR Connector

17. LPT Connector

18. Chassis Intrusion Alarm Header

19.COM1 Connector

20. DDR3 DIMM Slots

21. Chipset: Hudson D3(Co-lay Hudson D2)

22. CPU_FAN Headers

23. CPU Socket

Note : The above motherboard layout is for reference only, please refer to the physical mother-

board for detail.

16 1714

1-3 Back Panel Connectors

1. PS/2 Keyboard Port

Use the PS/2 port (purple) to connect a PS/2 keyboard.

2. USB Ports

The USB port supports the USB 3.0 (blue) /2.0/1.1 specication. Use this port for USB devices

such as an USB keyboard/mouse, USB printer, USB ash drive and etc. But you need to install

the USB 3.0 driver in the Driver CD before using it. (Hundson D2 don’t support USB 3.0)

3. VGA Port

To connect with external display devices, such as monitor or LCD display.

4. DVI-D Port

The DVI-D port supports DVI-D specication. Connect a monitor that supports DVI-D connection

to this port.

5. HDMI Port

The HDMI (High-Denition Multimedia Interface) provides an all-digital audio/video interface to

transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI audio/

video device to this port. The HDMI Technology can support a maximum resolution of 1920x1080p

but the actual resolutions supported depend on the monitor being used.

6. RJ-45 LAN Port

The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate.

LAN Type

Left: Active Right: Link

Status Description Status Description

1000M

Off No Link Off No Link

Green

Blinking

Data Activity

Off 10Mb/s Connection

Green 100Mb/s Connection

Orange 1000Mb/s Connection

Link

LED

Active

LED

LAN PortVGA PortPS/2 Keyboard Port

Audio Ports

Line Out

Microphone

Subwoofer

Rear Speaker

Side Speaker

Line In

DVI-D Port

USB Ports

HDMI Port

USB Ports

7. Audio Ports

For the denition of each audio port, please refer to the table below :

Port 2-channel 4-channel 5.1-channel 7.1-channel

Blue Line In Line In Line In Line In

Green Line Out Front Speaker Out Front Speaker Out Front Speaker Out

Pink Microphone In Microphone In Microphone In Microphone In

Orange - - Center/Subwoofer Out Center/Subwoofer Out

Black - Rear Speaker Out Rear Speaker Out Rear Speaker Out

Grey - - - Side Speaker Out

This chapter introduces the hardware installation process, including

the installation of the CPU, memory, power supply, slots, pin headers

and the mounting of jumpers. Caution should be exercised during

the installation of these modules. Please refer to the motherboard

layout prior to any installation and read the contents in this chapter

carefully.

This chapter includes the following information :

■ Install the CPU and CPU Cooler

■ Install the Memory

■ Install an Expansion Card

■ Install other Internal Connectors

■ Jumpers

Please visit the following website for more supporting information about your motherboard.

CPU Support List:

http://www.foxconnsupport.com/cpusupportlist.aspx

Memory, VGA Compatibility List:

http://www.foxconnsupport.com/complist.aspx

2-1 Install the CPU and CPU Cooler

Install the CPU

Locate the Pin-1 CPU triangle mark and the Pin-1 of the CPU socket.

Pin-1 triangle

marking of CPU

Pin-1 corner of the

CPU socket

1. Release the CPU socket lever.

2. Align Pin-1 of the CPU with the CPU

socket, and gently put the CPU

onto the socket.

Read the following guidelines before you begin to install the CPU :

■ Make sure that the motherboard supports the CPU.

■ Always turn off the computer and unplug the power cord from the power supply before

installing the CPU to prevent hardware damage.

■ Locate the Pin-1 of the CPU. The CPU cannot be inserted if oriented incorrectly.

■ Apply an even and thin layer of thermal grease on the surface of the CPU.

■ Do not turn on the computer if the CPU cooler is not installed, otherwise overheating

and damage of the CPU may occur.

■ Set the CPU host frequency in accordance with the CPU specications. It is not

recommended that the system bus frequency be set beyond hardware specications

since it does not meet the standard requirements for the peripherals. If you want to

set the frequency beyond the standard specications, please do so according to your

hardware specications including the CPU, graphics card, memory, hard drive, etc.

3. When CPU is properly seated,

push the CPU socket lever back

to its locked position.

Install the CPU Cooler

Follow the steps below to correctly install the CPU cooler. (The following procedures use Foxconn cooler as the example.)

1. Apply and spread an even thermal

grease on the surface of CPU.

2. Buckle the heatsink rmly at one

side of the stand.

3. Buckle the heatsink at another

side, and press the fasten lever

down to tightly seat the cooler.

4. Attach the 4-wire CPU cooler

connector to the CPU fan header

on the motherboard .

Use extreme care when removing the CPU cooler because the thermal grease may adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.

2-2 Install the Memory

Dual Channel Memory Conguration

This motherboard provides four DDR3 memory sockets and supports Dual Channel Technology.

When memory is installed, the BIOS will automatically check the memory in your system.

Four DDR3 memory sockets are divided into two channels :

Channel A : DIMM1, DIMM2

Channel B : DIMM3, DIMM4

The combinations of DIMM modules are :

It is recommended that memory of the same capacity, brand, speed, and chips be

used and please select dual channel rst to achieve optimum performance.

Read the following guidelines before you begin to install the memory :

■ Make sure that the motherboard supports the memory. It is recommended that memory

of the same capacity, brand, speed, and chips be used.

■ Always turn off the computer and unplug the power cord from the power outlet before

installing the memory to prevent hardware damage.

■ Memory modules have a foolproof design. A memory module can be installed in only

one direction. If you are unable to insert the memory, switch the direction.

DIMM1 DIMM2 DIMM3 DIMM4

Single Channel DS/SS - - -

Single Channel DS/SS DS/SS - -

Single Channel - - DS/SS -

Single Channel - - DS/SS DS/SS

Dual Channel DS/SS - DS/SS -

Dual Channel - DS/SS - DS/SS

Dual Channel DS/SS DS/SS DS/SS DS/SS

(DS : Dual Side, SS : Single Side, - : No Memory)

Installing a Memory

If you take a look at front side of memory module, it has asymmetric pin counts on both sides separated

by a notch in the middle, so it can only t in one direction. Follow the steps below to correctly install

your memory modules into the sockets.

Step 1: Spread the clips at both ends of the memory socket. Place the memory module onto the socket, then put

your ngers on top edge of the module, and push it down rmly and seat it vertically into the memory

socket.

Step 2:

The clips at both ends of the socket will snap into place when the memory module is securely inserted.

Before installing a memory module, make sure to turn off the computer and unplug the

power cord from the power outlet to prevent damage to the memory module. Be sure

to install DDR3 DIMMs on this motherboard.

Notch

96-Pin

144-Pin

2-3 Install an Expansion Card

Follow the steps below to correctly install your expansion card in the expansion slot.

1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis

back panel.

2. Align the card with the slot, and press down on the card until it is fully seated in the slot.

3. Make sure the metal contacts on the card are completely inserted into the slot.

4. Secure the card's metal bracket to the chassis back panel with a screw.

5. After installing all expansion cards, replace the chassis cover.

6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for

your expansion card(s).

7. Install the driver provided with the expansion card in your operating system.

Installing and Removing a PCI Express x16 Graphics Card :

• Installing a Graphics Card:

Gently insert the graphics card into the PCI Express x16 slot. Make

sure the graphics card is locked by the latch at the end of the PCI

Express x16 slot.

• Removing the Card:

Push the latch at the end of the PCI Express x16 slot to release the card and then pull the card straight up from the slot.

■ Make sure the motherboard supports the expansion card. Carefully read the manual

that came with your expansion card.

■ Always turn off the computer and unplug the power cord from the power outlet before

installing an expansion card to prevent hardware damage.

PCI

PCI Express x1

PCI Express x16

2-4 Install other Internal Connectors

Power Connectors

This motherboard uses an ATX power supply. In order not to damage any device, make sure all the devices have been installed properly before applying the power supply.

24-pin ATX power connector : PWR1

PWR1 is the ATX power supply connector. Make sure that the power supply cable and pins are properly aligned with the connector on the motherboard. Firmly plug the power supply cable into the connector and make sure it is secure.

4-pin ATX 12 V Power Connector : PWR2

The 4-pin ATX 12V power supply connects to PWR2 and provides power to the CPU.

We recommend you using a 24-pin power supply. If you are using a 20-pin power supply, you need

to align the ATX power connector according to the picture.

20-Pin Power

Pin No. 24

Pin # Denition Pin # Denition

1 3.3V 13 3.3V

2 3.3V 14 -12V

3 GND 15 GND

4 +5V 16 PS_ON(Soft On/Off)

5 GND 17 GND

6 +5V 18 GND

7 GND 19 GND

8 Power Good 20 NC

9 +5V SB(Stand by +5V) 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 3.3V 24 GND

PWR1

3 1

GND

+12V

4 2

PWR2

Pin # Denition

1 GND

2 GND

3 +12V

4 +12V

Connect a 4-pin

power plug

Fan Connectors : SYS_FAN, CPU_FAN 1

CPU_FAN 2

There are three main fan headers on this motherboard. The fan speed can be controlled and monitored in “PC Health Status” section of the BIOS Setup. These fans can be automatically turned off after the system enters

S3, S4 and S5 sleeping states.

Speaker Connector : SPEAKER

The speaker connector is used to connect speaker of the chassis.

COM Connector : COM1

This motherboard supports one serial RS232 COM port

for legacy compatibility. User must purchase another

RS232 cable with a 9-pin D-sub connector at one end to connect with the external RS232 device and another

end with 10-pin female connector to connect with COM1 connector in the motherboard.

LPT Connector (optional) : LPT

The connector supports parallel port which can be connected to a printer or a scanner. System usually assign IRQ7 as it’s default interrupt request and the parallel port has three operation mode: [SPP], [EPP],

[ECP].

SPKJ

EMPTY

SPEAKER

SPKJ

RLSD

SOUT

GND

RTS

DSR

DTR

CTS

EMPTY

SIN

COM1

GND POWER SENSE

CONTROL

CPU_FAN/SYS_FAN

Strobe Auto Feed

1 2

25 26

Error

SLCT IN

INIT

Ground

Empty

Data it [0]

Data it [1]

Data it [2]

Data it [3]

Data it [4]

Data it [6]

Data it [5]

Data it [7]

ACK

Busy

Paper End

Select

LPT

S/PDIF Connector : SPDIF_OUT

The connector is used for S/PDIF output.

Front Panel Connector : FP1

This motherboard includes one connector for connecting the front panel switch and LED Indicators.

Hard Disk LED Connector (HDD-LED)

Connect to the chassis front panel IDE indicator LED. It

indicates the active status of the hard disks. This 2-pin

connector is directional with +/- sign.

Reset Switch (RESET-SW)

Attach the connector to the Reset switch on the front panel of the case; the system will restart when the switch is pressed.

Power LED Connector (PWR-LED)

Connect to the power LED indicator on the front panel of the chassis. The Power LED indicates the system’s status. When the system is in operation (S0 status), the LED is on. When the system gets into sleep mode (S1) , the LED

is blinking; When the system is in S3/S4 sleep state or power off mode (S5), the LED is off. This 2-pin connector

is directional with +/- sign.

Power Switch Connector (PWR-SW)

Connect to the power button on the front panel of the chassis. Push this switch allows the system to be turned on and off rather than using the power supply button.

Serial ATA Connectors : SATA1/2/3/4/5/6

The Serial ATA connector is used to connect with SATA Hard Disk or CD devices which support this feature. Serial ATA II interface allows up to 300MB/s

data transfer rate. (Hundson

D3 supports SATA III)

HDD-LED

RESET-SW

PWR-SW

PWR-LED

EMPTY

FP1

SPDIF_OUT

+5V

EMPTY

SPDIF_OUT

GND

SATA1/2/3/4/5/6

GND TX+

TXGND

RXRX+

GND

Audio Connector : F_AUDIO

The audio connector supports HD Audio standard. It provides the Front Audio output choice.

Audio Connector : CD_IN

CD_IN is a Sony standard audio connector, it can be

connected to a CD/DVD-ROM drive through a CD/DVD audio cable.

USB Connectors : F_USB 1/2

In addition to the six USB ports on the rear panel, this product also provides two 10-pin USB headers on its motherboard. By connecting through USB cables with them, user can quickly expand another four USB ports on the front panel.

IR Connector : IR/CIR

This connector supports infrared wireless transmitting and receiving device.

Chassis Intruder Connector : INTR

The connector can be connected to a security switch on the chassis. The system can detect the chassis intrusion through the function of this connector. If eventually the chassis is closed, the system will send a message out.

PORT1_L

PORT1_R

PORT2_L

SENSE_SEND

SENSE1_RETURN

PRESENCE_J

EMPTY

SENSE2_RETURN

AUD_GND

1 2

109

F_AUDIO

PORT2_R

CD_IN

CD_L GND CD_R

INTR

GND

INTRUDERJ

CIR

+5VSB

EMPTY

GND

+5VSB

CIRRX

GND

CIRTX

EMPTY

1 2

9 10

GND

VCC

D+

D-

D+

GND

D-

VCC

EMPTY

F_USB1/2

USB Connectors : F_USB

In addition to the six USB ports on the rear panel, this product also provides one 10-pin USB headers on its motherboard. By connecting through USB cables with them, user can quickly expand another two USB ports

on the front panel

TPM Connector : TPM

The TPM (Trusted Platform Module) provides the ability to the PC to run applications more secure and to make transactions and communication more trustworthy. To utilize this function, you should purchase additional device and install it.

LCLK#

LFRAME#

LRESET#

LAD3

VDD

LAD0

SB3V

GND

LPCPD#

GND

EMPTY

LAD2

LAD1

GND NC SERIRQ

CLKRUN#

1 2

19 20

TPM

USB2.0 D+

USB2.0 D-

GND

USB3.0 SS TX+

USB3.0 SS TX-

GND

USB3.0 SS RX+

VCC

USB2.0 D+

USB2.0 D-

GND

USB3.0 SS TX+

USB3.0 SS TX-

GND

USB3.0 SS RX+

USB3.0 SS RX-

VCC

EMPTY

USB3.0

2-5 Jumpers

For some features needed, users can change the jumper settings on this motherboard to modify them. This section explains how to use the various functions of this motherboard by changing the jumper settings. Users should read the following content carefully prior to modifying any jumper setting.

Description of Jumpers

1. For any jumper on this motherboard, pin 1 can be identied by the bold silkscreen next to it.

However, in this manual, pin 1 is simply labeled as “1”.

2. The following table explains different types of the jumper settings. "Closed" means placing a jumper

cap on the two pins to temporarily short them. The shorting can also be done by touching two

pins by a screwdriver for a few seconds, but using jumper cap is recommended. It can prevent

hazardous ESD (Electrical Static Discharge) problem.

Clear CMOS Jumper: CLR_CMOS1

The motherboard uses CMOS RAM to store the basic hardware information (such as BIOS data, date, time information, hardware password...etc.). Clear CMOS data is the fast way to go back to

factory default when the BIOS settings were mistakenly modied.

The steps to clear CMOS data are :

1. Turn off the computer, unplug the power cord from the power outlet.

2. Remove jumper cap from pins 2-3, put it onto pins 1-2 to short them. This will clear CMOS

data.

3. Return the setting to its original with pins 2-3 closed.

4. Plug in the power cord to your computer and turn it on.

5. Go to BIOS Setup to congure new system as described in next chapter.

Clear

Normal (Default)

CLR_CMOS1

■ Disconnect the power cable before adjusting the jumper settings.

■ Do not clear the CMOS while the system is turned on.

Jumper Diagram Denition Description

1-2 Set Pin 1 and Pin 2 closed

2-3 Set Pin 2 and Pin 3 closed

Since BIOS could be updated some other times, the BIOS information described

in this manual is for reference only. We do not guarantee the content of this

manual will remain consistent with the newly released BIOS at any given time in

the future. Please visit our website for updated manual if it is available.

This chapter tells how to change system settings through the BIOS

Setup menus. Detailed descriptions of the BIOS parameters are

also provided.

You have to run the Setup Program when the following cases oc-

cur:

1. An error message appears on the screen during the system

Power On Self Test (POST) process.

2. You want to change the default CMOS settings.

This chapter includes the following information :

■ Enter BIOS Setup

■ Main Menu

■ System Information

■ Advanced BIOS Features

■ Fox Central Control Unit

■ Advanced Chipset Features

■ Integrated Peripherals

■ Power Management Setup

■ PC Health Status

■ BIOS Security Features

■ Load Optimal Defaults

■ Save Changes and Exit

■ Discard Changes and Exit

Enter BIOS Setup

The BIOS is the communication bridge between hardware and software, correctly setting up the BIOS parameters is critical to maintain optimal system performance. Power on the computer,

when the message "Press <DEL> to enter Setup, <F7> to boot menu" appears at the bottom of

the screen, you can press <DEL> key to enter SETUP.

Main Menu

The main menu allows you to select from a list of setup functions together with two exit choices.

Use the arrow keys to select a specic item and press <Enter> to go to the submenu.

Each item in the main menu is explained below:

► System Date

<weekday><month><date> <year> format. Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read Only).

Month—month from 1 to 12.

Date—date from 1 to 31. Year—year, set up by users.

Use [ENTER], [TAB] or [SHIFT-TAB] to select a eld. Use [+] or [-] to input the value.

► System Time

This item allows you to congure the desired time. Use [ENTER], [TAB] or [SHIFT-TAB] to select a eld. Use [+] or [-] to input the value. The three elds of the setting are <hour> : <minute> : <second> respectively.

We do not suggest that you change the default values in the BIOS Setup, and we shall not be responsible for any damage which resulted from the change you made.

Main F-Center Advanced Boot Power Health Security Exit

BIOS Information

System Date [Mon

07/18/2011]

System Time [09:31:53]

Access Level Administrator Model Name A75M BIOS Version B44F1D06 Build Date and Time 06/16/2011 16:20:56

Halt On [All, but keyboard]

CPU Brand Name: AMD Engineering Sample Total Memory 4096 MB (DDR3 1333) MAC Address D0-27-88-18-3D-04

→ ←: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Reset ESC: Exit

Set the Date. Use Tab to switch between Date elements.

Main

► Access Level

It displays your current access level. If you enter system with a user password, it will dispaly “User”. If no password is set or you enter system with administrator password, this item will dispaly “Administrator”.

► Model Name

This item shows the model name of this product.

► BIOS Version

It displays the current BIOS version. User can check this information and discuss with the eld

service people if a BIOS upgrade is needed.

► Build Date and Time

This item shows the BIOS building date and time.

► Halt On

This category determines whether or not the computer will stop if an error is detected during powering up. [All Errors]: All errors can result in system halt. [No Errors]: No error can result in system halt. [All, but keyboard]: All errors but keyboard can result in system halt.

► CPU Brand Name

It displays the current CPU name.

► Total Memory

This item displays the total memory size. The size is depending on how many memory modules are installed in your system before powering on.

► MAC Address

This item displays the onboard LAN MAC address.

Fox Control Center

► Super BIOS Protect

To protect the system BIOS from FLASH BIOS attack, there is a BIOS write-protection mecha-

nism

provided. Super BIOS Protect function protects your BIOS from being affected by FLASH BIOS,

e.g.

CIH.

► Auto Detect PCI/PCIE Clock

This option is used to auto detect PCI/PCIE slot. When enabled, the system will turn off clock

of the empty PCI/PCIE slot to reduce EMI (Electromagnetic Interference).

► Smart BIOS / Fox Intelligent Stepping / Voltage Options / CPU Configuration

Press <Enter> to go to the submenu.

Main Advanced Chipset Boot Power Health Security Save & Exit

Fox Control Center

Super BIOS Protect [Disabled] Auto Detect PCI Clock [Disabled] ▶ Smart BIOS ▶ Fox Intelligent Stepping ▶ Voltage Options ▶ CPU Configuration

→ ←: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values

F3: Optimized Defaults F4: Save & Reset ESC: Exit

Super BIOS Protection Settings

F-Center

Smart BIOS

► Smart Power LED

Smart Power LED is a feature built on your motherboard to indicate different states during

Power On Self Test (POST). The LED is located at the front panel, and it displays POST state

by different long-short blinking intervals. You can always leave this state enabled.

► Smart Boot Menu

When PC starts, it will ask you to press [Del] key to enter setup or press [F7] key to enter

smart boot menu. If [Disabled] is selected, then pressing [F7] has no function. This also pre-

vents user without password trying to get into your computer through smart boot menu.

Smart BIOS

Smart Power LED [Disabled]

Smart Boot Menu [Enable]d

→ ←: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Reset ESC: Exit

Smart Power LED Settings

F-Center

System Status Power LED Status Stop Blinking Condition

Normal Always On Always On

No Memory Continue blinking On (1sec.), Off (1sec.) Reboot & Memory OK

No Display Continue blinking On (2sec.), Off (2sec.) Reboot & Display OK

Post Error Message

Quick blinking twice (1/3sec. On, 1/3sec. Off), one long On (1sec.), continuously.

Enter Setup or Skip

No CPU Fan Continue blinking On (1/2sec.), Off (1/2sec.) Reboot & Fan OK

+ 74 hidden pages

Foxconn A75M Series, A55M Series User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual