Foxconn 865A01-PE-6EKRS User Manual
Statement:
This manual is the intellectual property of Foxconn, Inc. Although the information
in this manual may be changed or modified at any time, Foxconn does not
obligate itself to inform the user of these changes. Additionally, Foxconn does
not accept responsibility for any direct or indirect accident relating with the use
of this manual.
Trademark:
All trademarks are the property of their respective owners.
®
Intel
and Pentium® are registered trademarks of Intel Corporation.
PS/2 and OS/2 are the registered trademarks of IBM, Inc.
Windows
Award
®
95/98/2000/NT/XP/Me is the registered trademark of Microsoft.
®
is the registered trademark of Award, Inc.
Version:
User manual V1.3 in English for 865A01 series
P/N:91-181-613-14-40
Symbol description:
Note: refers to important information that can help you use motherboard better.
Attention: indicates that it may damage hardware or cause data loss, and tells
you how to avoid such problems.
Warning: means that a potential risk of property damage or physical injury exists.
More information:
If you want more information about our products, please visit Foxconn’s
website:
Foxconn:
865A01-English preface-V1.3-121603.p65 2004-5-27, 18:121
www.foxconnchannel.com
Item Checklist:
Thanks for your purchasing Foxconn’s 865A01 series motherboard. Please check
the package; if there are missing or damaged items, contact your distributor as
soon as possible.
865A01 series motherboard (x1)
Foxconn Utility CD (x1)
User manual (x1)
IDE ribbon cable (x1)
Floppy ribbon cable (x1)
I/O shield (x1)
S-ATA signal cable (x1) (optional)
S-ATA power cable (x1) (optional)
SPDIF cable (x1) (optional)
USB 2.0 cable (x1) (optional)
Floppy Driver disk (x1) (optional)
865A01-English preface-V1.3-121603.p65 2004-5-27, 18:122
Declaration of conformity
HON HAI PRECISION INDUSTRY COMPANY LTD
66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,
TAIPEI HSIEN, TAIWAN, R.O.C.
declares that the product
Mainboard
865A01 G/PE series
is in conformity with
(reference to the specification under which conformity is declared in
accordance with 89/336 EEC-EMC Directive)
EN 55022/A1: 2000 Limits and methods of measurements of radio disturbance
characteristics of information technology equipment
EN 61000-3-2/A14:2000 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits for harmonic current emissions
(equipment input current <= 16A per phase)
EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits of voltage fluctuations and flicker in lowvoltage supply systems for equipment with rated current
<= 16A
EN 55024/A1:2001 Information technology equipment-Immunity characteristics
limits and methods of measurement
Signature : Place / Date : TAIPEI/2003
Printed Name : James Liang Position/ Title : Assistant President
865A01-English preface-V1.3-121603.p65 2004-5-27, 18:123
Declaration of conformity
Trade Name: FOXCONN
Model Name:
Responsible Party: PCE Industry Inc.
Address: 458 E. Lambert Rd.
Telephone: 714-738-8868
Facsimile: 714-738-8838
Equipment Classification: FCC Class B Subassembly
Type of Product: Mainboard
Manufacturer: HON HAI PRECISION INDUSTRY
Address: 66 , CHUNG SHAN RD., TU-CHENG
865A01 G/PE
Fullerton, CA 92835
COMPANY LTD
INDUSTRIAL DISTRICT, TAIPEI HSIEN,
TAIWAN, R.O.C.
Supplementary Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions : (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
Tested to comply with FCC standards.
Signature : Date : 2003
865A01-English preface-V1.3-121603.p65 2004-5-27, 18:124
Table of Contents
Chapter
Main Features ............................................................................................. 2
865A01 Layout ........................................................................................... 5
Chapter
CPU ........................................................................................................... 11
Memory ..................................................................................................... 17
Power Supply ........................................................................................... 21
Rear Panel Connectors ............................................................................. 22
Other Connectors ..................................................................................... 24
Expansion Slots ........................................................................................ 34
Jumpers ................................................................................................... 37
Chapter
Enter BIOS Setup ...................................................................................... 42
Main menu ................................................................................................ 42
Standard CMOS Features Setup ............................................................... 44
BIOS Features .......................................................................................... 47
Advanced BIOS Features ......................................................................... 48
Advanced Chipset Features ..................................................................... 51
Integrated Peripherals ............................................................................... 53
Power Management Setup ........................................................................ 58
PnP/PCI Configuration Setup ..................................................................... 62
PC Health Status ....................................................................................... 63
Frequency/Voltage Control ....................................................................... 65
Load Fail-Safe Defaults ............................................................................ 66
Load Optimized Defaults ........................................................................... 66
Set Supervisor/User Password ................................................................ 66
Save & Exit Setup ..................................................................................... 67
Exit Without Saving ................................................................................... 67
1
1
2
2
3
3
Product Introduction
Installation Instructions
BIOS Description
865A01-English preface-V1.3-121603.p65 2004-5-27, 18:125
Table of Contents
Chapter
Utility CD content ...................................................................................... 69
Start to install Driver ................................................................................. 70
Install Chipset Software............................................................................ 70
Install IAA-RAID (optional) ......................................................................... 71
Install DirectX ............................................................................................ 72
Install VGA Driver (optional) ....................................................................... 73
Install USB2.0 Driver ................................................................................. 74
Install LAN Driver (For Realtek 10/100M LAN) (optional) ........................... 75
Install Intel
Install and Use 4- or 6- Channel Audio Function ........................................ 78
Install Norton
Chapter
SuperStep ................................................................................................. 86
SuperUpdate ............................................................................................ 89
Chapter
SuperSpeed .............................................................................................. 95
SuperBoot ................................................................................................. 97
SuperBIOS-Protect ................................................................................... 98
SuperRecovery ......................................................................................... 99
4
4
®
PRO Network Driver (For Intel® 1G LAN) (optional) ................. 76
Internet Security 2004 ....................................................... 84
5
5
6
6
Driver CD Introduction
Directions for Bundled Software
Special BIOS Feature
Installing WinXP & Win2K With RAID 108
865A01-English preface-V1.3-121603.p65 2004-5-27, 18:126
Appendix
Warning:
1. Attach the CPU and heatsink using silica gel to ensure full contact.
2. It is suggested to select high-quality, certified fans in order to avoid
damage to the motherboard and CPU due high temperature.
3. Never turn on the machine if the CPU fan is not properly installed.
4. Ensure that the DC power supply is turned off before inserting or re
moving expansion cards or other peripherals, especially when you
insert or remove a memory module. Failure to switch off the DC
power supply may result in serious damage to your system or memory
module.
Warning:
We cannot guarantee that your system will operate normally while
over-clocked. Normal operation depends on the over-clock capacity
of your device.
Note:
Since BIOS programs are upgraded from time to time, the BIOS
description in this manual is just for reference. We do not guarantee
that the content of this manual will remain consistent with the actual BIOS version at any given time in the future.
Note:
The pictures of objects used in this manual are just for your reference.
Please refer to the physical motherboard.
865A01-English preface-V1.3-121603.p65 2004-5-27, 18:127
This page is intentionally left blank
865A01-English preface-V1.3-121603.p65 2004-5-27, 18:128
Chapter
Thank you for buying Foxconn’s 865A01 series
motherboard. This series of motherboard is one of our
new products, and offers superior performance, reliability
and quality, at a reasonable price. This motherboard
adopts the advanced Intel ® 865 G/PE+ICH5/5R chipset,
providing users a computer platform with a high integra-
tion-compatibility-performance price ratio.
This chapter includes the following information:
1
1
Motherboard Features
865A01 Layout
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:021
Chapter 1 Product Introduction
Main Features
Size:
ATX form factor of 12” x 9.6”
Microprocessor:
Supports Intel
Supports Intel
Supports FSB at 400MHz/533MHz/800MHz
Supports Hyper-Threading technology
Chipset:
®
Intel
System Memory:
Provides four 184-pin DDR DIMM Sockets
Supports for PC3200/2700/2100
Supports for 128/256/512Mb technology up to 4GB
Supports Dual-channel DDR
®
Pentium®4 Socket 478 (Willamette/Northwood/Prescott) processors
®
Celeron® Socket 478 (Willamette/Northwood) processors
Springdale Chipset: Intel® 865G/PE (NorthBridge) +ICH5/5R (SouthBridge)
Attention:
1. Use the same memory modules for Dual-Channel.
2. The memory operating frequency is 320MHz while FSB800 CPU
works with DDR333.
USB 2.0 Port:
Supports hot-Plug
Eight USB 2.0 ports (four rear panel ports, two onboard USB headers
providing four extra ports)
Supports wake-up from S1 and S3 mode
Supports USB 2.0 Protocol up to480 Mbps transmission rate
2
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:022
865A01 G/PE User Manual
Chapter 1 Product Introduction
Onboard Serial ATA:
150MBps transfer rate
Supports two S-ATA devices, such as HDD, etc.
Supports Raid0, Raid1 (Supported by ICH5R (SouthBridge) motherboard only)
Onboard 1394 (Optional):
Supports hot-Plug
With rate of transmission at 400Mbps
Self-configured addressing
Supports two independent 1394 units synchronously at most, such as HDD,
CD-ROM
Onboard LAN (Optional):
Supports 10/100Mbit/sec Ethernet
LAN interface built-in on board
10M/100M/1G LAN interface (Optional)
Onboard Audio:
AC’ 97 2.2 Specification Compliant
Supports S/PDIF output/input
Onboard Line-in jack, Microphone-in jack, Line-out jack
Supports 5.1 channels audio (setting via software)
Onboard Graphics :
Supports integrated VGA display function (Intel Extreme Graphics)
(Supported on 865A01G only)
Supports external AGP3.0 specification; supports 4X/8X display cards
BIOS:
Licensed advanced AWARD (Phoenix) BIOS, supports flash ROM, Plug-and-
Play
Supports IDE CD-ROM, SCSI HDD or USB device boot up
865A01 G/PE User Manual
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:023
3
Chapter 1 Product Introduction
Green Function:
Supports ACPI (Advanced Configuration and Power Interface)
Supports five system modes-S0 (normal), S1 (power on suspend), S3
(suspend to RAM), S4 (suspend to disk-depends on OS), and S5 (soft-off)
Expansion Slots:
5 PCI slots
1 AGP slot
AGP 8X support:
AGP 8X (AGP 3.0) is the VGA interface specification that enabled enhanced
graphics performance with high handwidth speeds up to 2.12 GB/s.
Advanced Features:
PCI 2.2 Specification Compliant
Supports Windows98/2000/ME/XP soft-off
Supports Wake-on-LAN, Wake-on-Modem function
Supports PC Health function (capable of monitoring system voltage, CPU,
system temperature, and fan speed)
4
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:024
865A01 G/PE User Manual
865A01 Layout
Chapter 1 Product Introduction
17
16
15
1
3 42
5
6
7
8
9
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:025
12 111314
865A01 G/PE User Manual
10
5
Chapter 1 Product Introduction
ATX 12V connector
1
This power connector connects the 4-pin 12V plug from the ATX 12V power
supply.
2
CPU socket
A 478-pin surface mount, Zero Insertion Force (ZIF) Socket for the intel
Pentium® 4 processor (and Intel’s future Prescott CPU) Supports 800/533/
400 MHz system bus and allows up to 6.4GB/s data transfer rates.
3
North bridge controller
The Intel® 865G Graphics Memory Controller Hub(GMCH) and the Intel® 865PE
Memory Controller Hub(MCH) provide the processor interface with 800/533/
400 MHz frequency, system memory interface at 400/333/266MHz operation,
and 1.5V AGP interface that supports AGP 3.0 specification including 8X Fast
Write protocol, the GMCH provides an integrated graphics accelerator.
4
DDR DIMM sockets
These four 184-pin DIMM sockets support up to 4GB system memory using
unbuffered non-ECC PC3200/2700/2100 DDR DIMMs.
®
5
Super I/O
The Winbond W83627HF Low Pin Count (LPC) interface provides the
commonly used Super I/O functionality. The chip supports a high-performance
floppy disk controller for a 360k/720K/1.44M/2.88M floppy disk drive, a multi-
mode parallel port, two serial ports, the mouse and keyboard interface and
the LPC (Low Pin Count) interface.
6
ATX power connector
This 20-pin connector connects to an ATX power supply. The power supply
must have at least 1A on the +5V standby lead (+5VSB).
7
IDE connectors
These 2-channel bus master IDE connectors support Ultra DMA 100/66/33,
PIO Modes 3 & 4 IDE devices. Both the primary (blue)and secondary (white)
connectors are slotted to prevent incorrect insertion of the IDE ribbon cable.
6
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:026
865A01 G/PE User Manual
Chapter 1 Product Introduction
8
AGP slot
This Accelerated Graphics Port (AGP) slot supports 1.5V AGP8X mode graphic
card for 3D graphical applications.
Serial ATA connectors
9
These two 7-pin connectors accommodate the thin cables for Serial ATA
devices.
10
Floppy disk connector
This connector accommodates the provided ribbon cable for the floppy disk
drive. One side of the connector is slotted to prevent incorrect insertion of the
floppy disk cable.
11
Flash ROM
This 4Mb flash ROM contains the programmable BIOS program.
12
South bridge
The Intel ICH5/5R are subsystem that integrate various I/O functions including
2-channel ATA100 bus master IDE controller, SATA RAID controller (Supported
by ICH5R only), up to eight USB 2.0/1.1 ports, I/O APIC ,AC’97 2.2 interface,
and PCI 2.2 interface.
13
PCI Slots
These five 32-bit PCI 2.2 expansion slots support bus master PCI cards like
SCSI or LAN cards with 133MB/s maximum throughput.
14
Audio CODEC
The ALC650 is an AC’97 CODEC that allows 6-channel audio playback. The
audio CODEC provides six DAC for 5.1 surround sound, S/PDIF output, AUX
and CD-IN, Line-in, Line-out and Speaker out.
15
1394 controller (optional)
VT6307 is the controller for IEEE1394a on Motherboard. The VT6307 is a
complete small package single chip PCI solution at 400Mbps, low power
seamless plug and play connections to the latest IEEE 1394 enabled devices.
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:027
865A01 G/PE User Manual
7
Chapter 1 Product Introduction
16
10/100M LAN controller (optional)
The RTL8101L is a single-chip solution for LAN On Motherboard (LOM)
applications. The RTL8101L supports 10/100 Mbps data transfer rate.
17
1G LAN controller (Optional)
The 82547EI Gigabit Ethernet is a single-chip solution for LAN on
Motherboard (LOM) applications, and supports 10/100/1000 Mbps data
transfer rates.
8
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:028
865A01 G/PE User Manual
Chapter
This chapter introduces the hardware installation process,
including the installation of the CPU and memory. It also
addresses the connection of your power supply, use of
the rear panel connectors, connection of hard drive and
floppy drive data cables, and setting up various other
feature of the motherboard. Caution should be exercised
during the installation process. Please refer to the
motherboard layout prior to any installation and read the
contents in this chapter carefully.
2
2
Chapter 1 Product Introduction
This chapter includes the following information:
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:029
CPU
Memory
Power Supply
Rear Panel Connectors
Other Connectors
Expansion Slots
Jumpers
865A01 G/PE User Manual
9
Chapter 1 Product Introduction
Notes:
Take note of the following precautions before you install components or change settings.
1. Use a grounded wrist strap or touch a safely grounded object,
such as an attached power supply, before handling components
to avoid damaging them due to static electricity.
2. Unplug the power cord before opening your chassis or touching
any component.
3. Hold components by their edges to avoid touching any exposed
integrated circuits (ICs).
4. Whenever you uninstall a component, place it on a grounded
anti-static pad or into the anti-static bag that it came in.
10
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0210
865A01 G/PE User Manual
Chapter 2 Installation Instructions
CPU
This motherboard accepts Intel socket 478 processors (CPUs) with a front side
bus (FSB) of 400/533/800 MHz Processors with Hyper-Threading technology
are supported.
Attention:
The CPU pins must be properly aligned with the holes in the
socket, otherwise the CPU may be damaged.
Installation of CPU
Follow these steps to install the CPU.
1. Unlock the socket by pressing the lever sideways, then lift it up to a 90
o
angle.
2. Align the cut edge to the gap in the
base of the socket. Carefully insert
the CPU into the socket until it fits in
place.
3. When the CPU is in place, press it
firmly on the socket while you push
down the socket lever to secure the
CPU. The lever clicks on the side tab
to indicate that it is locked.
Cut edge
90
o
Gap in the base
Push down the socket
lever to secure the CPU.
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0211
865A01 G/PE User Manual
11
Chapter 2 Installation Instructions
Installation of CPU Fan
New technology allows processors to run at higher and higher frequencies.
To avoid problems arising from high-speed operation, for example,
overheating, you need to install the proper fan. The following procedure is
provided for reference only, please refer to your CPU fan user guide for the
actual procedure.
1.Locate the CPU retention mechanism
base (surrounds the CPU socket).
3. Attach the fan to the base.
2.If required, apply a light coating of
silica gel to the top of the CPU.
NOTE: The CPU heatsink may have
a pre-applied thermal compound. In
that case, the silica gel is not required.
4.Connect the fan’s power cable
to the appropriate 3-pin terminal
on the motherboard.
Warning:
Excessive temperatures will severely damage the CPU and
system. Therefore, make sure that the cooling fan works normally at all times in order to prevent overheating and damaging
to the CPU.
12
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0212
865A01 G/PE User Manual
Chapter 2 Installation Instructions
Attention:
1.Position the fan with the retention mechanism on top of the
heatsink. Align and snap the four hooks of the retention mechanism to the holes on each corner of the module base.
2.Make sure that the fan and retention mechanism assembly
perfectly fits the headtsink and module base, otherwise you
cannot snap the hooks into the holes.
Retention Hole
Retention Lock
Warning:
Keep the retention locks lifted upward while fitting the retention
mechanism to the module base.
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0213
Retention Hook snapped
to the Retention Hole
865A01 G/PE User Manual
13
Chapter 2 Installation Instructions
Attention:
1.Push down the locks on the retention mechanism to secure
the heatsink and fan to the module base.
2.When secure,the retention locks should point to opposite
directions.
14
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0214
865A01 G/PE User Manual
Chapter 2 Installation Instructions
CPU Qualified Vendor List
The following table lists the CPU modules that have been tested and quali-
fied for use with this motherboard.
Vendor Type FSB Frequency
Intel Pentium(Willamette) 400 1.7G,1.8G
Intel Celeron(Willamette) 400 1.7G,1.8G,
Intel Pentium(Northwood) 400 2.0G,2.2G,2.4G,2.5G,2.6G
Intel Celeron(Northwood) 400 2.0G,2.1G,2.2G,2.4G,2.6G
Intel Pentium(Northwood) 533 2.4G,2.53G,2.66G,2.8G,3.06G
Intel Pentium(Northwood) 800 2.4G,2.6G,2.8G,3.0G,3.2G
Intel Pentium(Prescott) 800 2.8G
Intel P4PXE(Northwood) 800 3.0G
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0215
865A01 G/PE User Manual
15
Chapter 2 Installation Instructions
Memory
This motherboard includes four 184-pin slots with 2.6V Double Data Rate
(DDR) Dual Inline Memory Module (DIMM) sockets, so you can install PC3200/
2700/2100 memory. You must install at least one memory bank to ensure
normal operation.
DIMM1
DIMM2
DIMM3
DIMM4
DDR Memory
The DDR SDRAM technology evolved from the mainstream PC66, PC100,
PC133 memory known as Single Data Rate (SDR) SDRAM. DDR memory,
however, has the ability to perform two data operations in one clock cycle,
thus providing twice the throughput of SDR memory.
A DDR DIMM has the same physical dimensions as an SDR DIMM, but it
has a 184-pin footprint compared to the 168-pin of the SDR DIMM. Also, a
DDR DIMM is single notched while an SDR DIMM is double notched.
Therefore, a DDR DIMM is not backward compatible with SDR, and should
be installed only in a socket specially designed for DDR DIMMs.
16
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0216
865A01 G/PE User Manual
Chapter 2 Installation Instructions
Memory configurations
You may install 64MB, 128MB, 256MB, 512MB, and 1GB DDR DIMMs into the
DIMM sockets using the memory configurations in this section.
The following is important information on memory configurations:
1. Installing DDR DIMMs other than the recommended configurations may
cause memory sizing errors or system boot failures. Use any of the
recommended configurations in the following table.
Sockets
Mode
Single-channel
Dual-channel
DIMM1 DIMM2 DIMM3 DIMM4
Populated
Populated
xxx
x
x
Populated
xx
xx
Populated
x
x
x
Populated
Populated
xx
xxx
Populated
x
Populated
Populated Populated
x
PopulatedPopulated
x
PopulatedPopulatedPopulated Populated
x
Populated
xx
Populatedx
PopulatedPopulated
Note:
1. Use only identical DDR DIMM pairs
2. For dual-channel configuration, you may install identical
DIMMS in all four sockets or install identical DIMM pairs
in DIMM1 and DIMM3 (yellow sockets), and identical DIMM
pairs in DIMM2 and DIMM4 (blue sockets).
2. In dual-channel configurations, install only identical (the same type and
size) DDR DIMMs for each channel.
3. Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor. See the following list of qualified vendors. The
following table lists the PC3200/2700/2100 memory modules that have
been tested and qualified for use with this motherboard.
865A01 G/PE User Manual
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0217
17
Chapter 2 Installation Instructions
Vender Type Size
Infineon PC2100 (DDR 266) 256M
Infineon PC2700 (DDR 333) 128M,256M,512M
Infineon PC3200 (DDR 400) 256M,512M
Micron PC2100 (DDR 266) 128M,256M,512M
Micron PC2700 (DDR 333) 128M,256M,512M
Micron PC3200 (DDR 400) 256M
Samsung PC2100 (DDR 266) 256M
Samsung PC2700 (DDR 333) 256M,512M,1G
Samsung PC3200 (DDR 400) 256M,512M,1G
Kingmax PC2100 (DDR 266) 128M,256M
Kingmax PC2700 (DDR 333) 256M,512M
Kingmax PC3200 (DDR 400) 256M,512M
Kingston PC2100 (DDR 266) 128M,256M
Kingston PC2700 (DDR 333) 256M,512M
Kingston PC3200 (DDR 400) 256M,512M
Hynix PC2100 (DDR 266) 128M,256M
Hynix PC2700 (DDR 333) 256M,512M
Hynix PC3200 (DDR 400) 256M,512M
Transcend PC2100 (DDR 266) 256M
Transcend PC2700 (DDR 333) 256M,512M
Transcend PC3200 (DDR 400) 256M,512M
Apacer PC2100 (DDR 266) 256M
Apacer PC2700 (DDR 333) 256M,512M
Apacer PC3200 (DDR 400) 256M,512M
A-DATA PC2 700 (DDR 333) 256M
A-DATA PC3 200 (DDR 400) 256M
Nanya PC2100 (DDR 266) 128M,256M,512M
Nanya PC2700 (DDR 333) 128M,256M,512M
Winbond PC2700 (DDR 333) 256M,512M
TwinMos PC3200 (DDR 400) 256M,512M
Geil PC3200 (DDR 400) 256M
Note:
Make sure to use only the tested and qualified DDR DIMMS
listed above. Other DDR DIMMs manufactured by other ven-
dors may not be suitable for this motherboard.
18
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0218
865A01 G/PE User Manual
Chapter 2 Installation Instructions
4. Make sure that the memory frequency matches the CPU FSB (Front Side
Bus). Refer to the following table.
CPU FSB DDR DIMM Type Memory Frequency
800 MHz PC3200/PC2700/PC2100 400/333/266 MHz
533 MHz PC2700/PC2100 333/266 MHz
400 MHz PC2100 266 MHz
Note:
1. When using 800MHz CPU FSB,PC2700DDR DIMMs may
run only at 320MHz(not 333MHz) due to chipset limitation.
2.The following FSB/DDR ratios are not supported:400/333,
400/400,533/400.
3. FSB/DDR setting 800/333 is recognized as FSB/DDR 800/
320.
5. DIMMs installed into any three sockets will function in single Channel
mode.
6. When all four sockets are populated with 1GB DIMMs (total 4GB), the
system may detect over 3GB (a little less than 4GB) to ICH5R resource
allocation.
7. Double-sided DDR DIMMs with X16 (databus width=16-bit) memory chips
are not supported due to chipset limitations.
8. lt is recommended to use the yellow DIMM slots first.
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0219
865A01 G/PE User Manual
19
Chapter 2 Installation Instructions
Installation of DDR Memory
1. There is only one gap in the center of the DIMM slot, and the memory
module can be fixed in one direction only.
2. Align the memory module to the DIMM slot, and insert the module
vertically into the DIMM slot.
104 Pins 80 Pins
3. The plastic clips at both sides of the DIMM slot will lock automatically.
Note:
Be sure to unplug the AC power supply before adding or
removing expansion cards or other system peripherals, es-
pecially the memory devices, otherwise your motherboard
or the system memory might be seriously damaged.
20
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0220
865A01 G/PE User Manual
Chapter 2 Installation Instructions
Power Supply
This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting the power supply.
ATX 12V Power Connector: CN11
The 4 pin ATX 12V power supply connects to CN11 and provides power to the
CPU.
ATX Power Connector: CN25
CN25 is the ATX power supply connector. Make sure that the power supply
cable and pins are properly aligned with the connector on the motherboard.
Firmly plug the power supply cable into the connector and make sure it is
secure.
ATX 12V Power Connector
24
GND
GND
1
12V
12V
3
Attention:
You have to press the power button for more than four seconds if you
change the default Instant-off setting to “Delay 4 Sec” for the soft-off
by Power Button option in the BIOS Power Management Setup.
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0221
ATX 20-pin Power Connector
20
10
12V
865A01 G/PE User Manual
5V GND 3.3V GND GND
5V
-5V GND PS-ON -12V
5V
5V
Pw-OK 3.3V
5VSB
GND
11
1
GND 3.3V GND
21
Chapter 2 Installation Instructions
Rear panel Connectors
This motherboard provides the following ports, as below:
1
PS/2 Mouse Port
2
PS/2 Keyboard
Port
1
PS/2 Mouse Port
3
COM 1 Port
SPP/EPP/ECP
4
Parallel Interface
(Printer Port)
(Supported on
865A01G only)
VGA Port
5
1394Port
7 8
(Optional)
6
LAN Port
(Optional)
USB 2.0 Port
This motherboard includes one standard PS/2 mouse port. You can connect the PS/2 mouse directly into this port.
2
PS/2 Keyboard Port
This motherboard includes one standard PS/2 keyboard port. If you use a
standard AT keyboard, then you will need a converter to use this port.
3
Serial port: COM1
This motherboard includes one 9-pin common adapter for serial port COM1.
This port is the 16550 high-speed communication interface used to transfer and receive 16-byte FIFO. You can connect the sequential mouse or
other sequential devices directly to the port.
Line-in
Line-out
MIC
9
4
Parallel Port (Printer Port)
This motherboard includes one 25-pin mother connector for LPT. The parallel port is a standard printer port which supports the enhanced parallel
port (EPP), ECP mode, etc.
5
VGA Connector (supported on 865A01G only)
The VGA connector is for output to a VGA-compatible device.
6
USB 2.0 Ports
These four Universal Serial Bus (USB) ports are available for connecting
USB 2.0 devices.
22
865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0222
865A01 G/PE User Manual
Loading...