Fowler Xtra-Value Cal Operating Instructions And Parts Manual

Fowler High Precision, Inc.

66 Rowe Street • Newton, MA 02466

1-800-788-2353 • Fax: [phone]

Internet: www.fowlerprecision.com • E-mail: [e-mail]

Thank you for your purchase of the Fowler Xtra-Value Cal Electronic Caliper.
Please carefully review this instruction manual to insure proper and accurate use of your new instrument.

IMPORTANT!

1. Before using this caliper for the rst time, wipe the rust preventive oil from the caliper with a soft cloth.

2. Never apply voltage (e.g. engraving with an electric engraver) on any part of the caliper for fear of damaging

the circuit.

3. After use, take corrosion prevention measures such as a very ne clock oil.

Internal Jaws

Hold

External Jaws

Zero

Battery Cover

Beam

Depth Measurement Rod

Thumbroll

in/mm Locking screw

LCD display

Functions and Features

Turn on the caliper by moving the measuring carriage. Auto switch off after several minutes.

Zero Setting: Press <zero> function button

Changing Measuring Standard: Press <inch/mm> function button to toggle between in/mm

Absolute/Incremental: Press <abs> button, to return to zero function press button again

Hold: Press once to freeze display reading. Press again to resume measuring

Operating Instructions and Parts Manual Model No: 54-101-150-2
74-101-150-2

SEE REVERSE FOR FURTHER INSTRUCTIONS

Cleaning

Clean the caliper with a soft cloth and a few drops of ne clock oil. DO NOT use any type of sol­vent. DO NOT immerse the caliper in liquid.

Battery Replacement

• Slide off the battery cover, then remove the battery by gently tapping the instrument in your hand
(Never try to force or pry the battery out). Insert the new battery with the positive pole "+" facing
upwards and replace the cover

• Please dispose of used batteries at a proper collection center.

Electronic Caliper

®

ABS

Measuring Range:
Resolution:
Accuracy:
Repeatability:
Measuring System:
Display:
Maximum Measuring Speed:
Battery:

Battery Life:
Operational Temperature Range:
Maximum Relative Humidity:

0-6"/150mm

.0005"/.01mm

±.001"/.02mm
.0005"/.01mm

Capacitive

LCD 8.0 mm high

120" per second

3V, CR2032 Lithium Battery

#54-100-350-0

Approximately 1 year

0°C to +40°C

80%

CAUTION

• DO NOT disassemble, short-circuit, charge, or heat the battery.

• The outside and inside measuring jaws of this caliper have sharp edges,
handle it with great care.

TO AVOID INJURY

Fowler High Precision, Inc.

66 Rowe Street • Newton, MA 02466
1-800-788-2353 • Fax: [phone]
Internet: www.fowlerprecision.com • E-mail: [e-mail]

Symptom

• Digits do not change or count correctly

• No Display

Corrective Action

• Remove the battery for 30 seconds then reinstall.

• Check battery contacts or replace battery.

RESET: In order to RESET the instrument, remove the battery, wait 30 seconds, replace the battery and

turn the instrument on.

Precautions: Although a top quality product, certain precautions are required for any
electronic instrument:

• Avoid exposure to all liquids and excessive humidity.

• Avoid exposure to electromagnetic elds.

• Do not expose the instrument to direct sunlight.

• Do not attempt to disassemble the caliper.

Technical Data

Troubleshooting Chart

Electronic Caliper

®

Operating Instructions and Parts Manual Model No: 54-101-150-2
74-101-150-2