Foster F40, F85, F20, F60, CUBE ICE MAKER F60 User Manual

Loading...

operating instructions

Foster European Operations

France

Foster Refrigerator France SA

Tel: (33) 01 34 30 22 22 Fax: (33) 01 30 37 68 74 Email: info@fosterfrance.com

Germany

Foster Refrigerator Germany

Tel: (0781) 96 93 00 Fax: (0781) 96 93 019 Email: info@fosterrefrigerator.de

Foster Refrigerator

Oldmedow Road, King’s Lynn,

Norfolk, PE30 4JU

England

Tel: 01553 691122

Fax: 01553 691447

Website: www.fosterrefrigerator.co.uk

Email: sales@foster-uk.com

a Division of ITW (UK) Ltd.

FSERIESICECUBER/OP/INS 08/04 00-555226

Cube Ice Maker

F20, F40, F60, F85

installation and operating instructions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GB

Operating instructions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F

Notice d’installation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D

Bedienungsanleitung

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NL

Gebruiksaanwijzing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GB

english

 

harmful to the environment. All old refrigerators must be disposed of by

 

 

 

 

DISPOSAL REQUIREMENTS

 

 

 

 

If not disposed of properly all refrigerators have components that can be

 

 

 

 

appropriately registered and licensed waste contractors, and in accordance

 

 

 

 

with National laws and regulations.

preface

1

of

for

is

General Information

at Delivery

Important:

Carefully read this user manual before installing the machine.

2

Please note the following guidelines:

That the packing does not show any sign of damage.

That the unit corresponds to what is specified on the purchase order.

That the machine is not damaged externally and no parts are missing.

That during transport certain integral parts have not been damaged.

In case of severe damage or parts missing, report immediately to the delivering carrier and your distributor.

The illustrations shown in this manual are generic and can differ in some details from the delivered machine.

Any illustration, schematic or documents supplied with the machine belong to the manufacturer who reserve copyright and expressly forbids any reproduction of them without written permission. The Manufacturer's policy is one of continuous improvement and reserves the right to make changes at any time without prior notice or incurring any obligation whatsoever.

unit description

3

The units described in this manual are self-contained cube ice makers, namely with a built in ice

storage bin.

A percentage of ice production capacity can be stored in the self contained bin in which a sensor controls the collected

ice level.

When this control is in contact with the stored ice, the thermostat cuts-off the unit operation. Another thermostat controls all the process

sequences of the machine related to ice making and release of ice cubes.

safety instructions

4

For the correct unit operation you must carefully read this manual and adhere to its instructions, by doing this your machine will operate safetly and last for several years to come. If in any doubt you

should contact your local distributor.

5

The Manufacturer accepts no responsibility whatsoever for any damage or injury to people resulting from the non-observance of the safety instructions.

Warning

Disconnect the electrical power before beginning any maintenance or cleaning operation.

6

Make sure your hands are properly wiped dry.

8

Important

Do not remove any service panel secured with screws.

7

electrical isolator must be within

reach of the installed machine.

9

10

The water shut-off valve must be within hand reach of the installed machine.

11

Attention

Maintenance and cleaning operations must be performed by authorised service agents.

13

Never push or drag it.

12

If the unit is to be moved, be sure to lift it rather than damage the levelling feet.

14

Make sure that the cabinet is connected to a mains electrical supply complete with an earth connection.

transport

15

As transport protection the ice maker is packed in a heavy cardboard crate.

16

For moving the packed unit to site use a fork lift with forks no thicker than 40mm.

17

For the unpacking of the unit observe the pictorial view.

18

Make sure and locate the ice scoop inside the ice storage bin. Make sure water and drain pipes are inside the ice storage bin.

2

15

location

A minimum clearance of 15cm (6 in) must be left at the sides of the machine for routing cooling air drawn into and exhausted out of the compartment to maintain a proper condensing operation.

Position the ice maker in its final location and make sure that there is everything for its installation, namely:

19

Fused switched power supply.

20

Water supply connection with shut-off valve.

21

Waste drain water connection.

22

Attention

Make sure that water available is connected to a cold drinking water supply. If in doubt consult the installer for the possible installation of a water filter or water conditioner.

To gain full advantage from this unit in terms of performance and durability also make sure that:

23

Minimum water temperature is not lower than +5˚C and maximum water temperature does not exceed +40˚C.

24

Minimum water pressure is not below 1 bar and maximum water pressure does not exceed 5 bar.

25

The electrical suppy available corresponds to machine specifications as indicated on the unit

nameplate.

14

26

The electrical isolator switch must be fitted with the correct fuse rating.

27

The minimum ambient temperature should not be lower than +10˚C and the maximum ambient temperature higher than +40˚C

28

There are no heat sources (kitchen ovens, grills) near the machine and the environment is not too humid.

how the installation is made

Important

The machine installation has to be performed by Authorised Service Personnel

29

Connect the power lead to a suitable electrical supply

30

Check machine is level.

31

The level can be corrected by means of the levelling feet.

32

Make the connection to the water supply using the hoses supplied with the machine.

GB english

33

Water drain is connected and set-up properly using spiralled hose which should have a minimum fall of 3cm per metre.

34

It is recommended that the interior of the storage bin is cleaned with an appropriate mild disinfectant solution.

start up

35

Open water shut-off valve.

36

Plug in machine.

37

Switch the main switch to the ON position.At this stage the unit will start up.

38

The Authorised Service Agent will complete an inspection of the unit interior.

The first batch of ice cubes will drop into the storage bin approximately 30

minutes from start-up. The first batch of ice will

be of poor quality but subsequent batches will be good quality.

39

Attention

If the temperature of the room in which the machine is placed is below +15˚C, the freezing cycle length will be shorter (17 to 20 minutes).

40

Alternatively, if the room temperature is above +30˚C, the freezing cycle length will be longer (25 to 30 minutes).

3

+ 5 hidden pages