Foscam FI9805P User Manual
V1.1
User
User
Manual
Manual
Model: FI9805P
Outdoor HD Wireless IP Camera
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
1
Table of Contents
Security Warning
......................................................................................................................................................
3
1 Overviews
...............................................................................................................................................................
3
1.1 Key Features.......................................................................................................................................................................4
1.2 Read Before Use................................................................................................................................................................4
1.3 Packing Contents............................................................................................................................................................... 4
1.4 Physical Description.......................................................................................................................................................... 5
2 Accessing the Network Camera
........................................................................................................................
6
2.1 Access the Camera in LAN...............................................................................................................................................6
2.2 Access the Camera in WAN............................................................................................................................................. 7
2.2.1 Static IP Addresses.....................................................................................................................................................7
2.2.2 Dynamic IP Addresses............................................................................................................................................... 9
2.3 Using the VLC player...................................................................................................................................................... 12
2.4 IP camera connection to the server.............................................................................................................................. 14
3 Surveillance Software GUI
...............................................................................................................................
15
3.1 Login Window................................................................................................................................................................... 15
3.2 Surveillance Window....................................................................................................................................................... 18
4 Advanced Camera Settings
..............................................................................................................................
23
4.1 Setup Wizard.................................................................................................................................................................... 23
4.2 Device Status....................................................................................................................................................................24
4.2.1 Device Information.................................................................................................................................................... 24
4.2.2 Device Status.............................................................................................................................................................24
4.2.3 Session status........................................................................................................................................................... 25
4.2.4 Log...............................................................................................................................................................................25
4.3 Basic Settings................................................................................................................................................................... 26
4.3.1 Camera Name........................................................................................................................................................... 26
4.3.2 Camera Time............................................................................................................................................................. 26
4.3.3 User Accounts........................................................................................................................................................... 27
4.3.4 Multi-Camera............................................................................................................................................................. 29
4.4 Network..............................................................................................................................................................................34
4.4.1 IP Configuration.........................................................................................................................................................34
4.4.2 Wireless Settings...................................................................................................................................................... 36
4.4.3 PPPoE........................................................................................................................................................................ 37
4.4.4 DDNS..........................................................................................................................................................................38
4.4.5 UPnP........................................................................................................................................................................... 41
4.4.6 Port..............................................................................................................................................................................42
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
2
4.4.7 Mail Settings.............................................................................................................................................................. 44
4.4.8 FTP Settings.............................................................................................................................................................. 46
4.4.9 P2P..............................................................................................................................................................................47
4.5 Video.................................................................................................................................................................................. 47
4.5.1 Video Settings........................................................................................................................................................... 47
4.5.2 On Screen Display.................................................................................................................................................... 48
4.5.3 Privacy Zone.............................................................................................................................................................. 49
4.5.4 Snapshot Settings.....................................................................................................................................................51
4.5.5 IR LED Schedule.......................................................................................................................................................51
4.6 Alarm.................................................................................................................................................................................. 52
4.7 Record............................................................................................................................................................................... 55
4.7.1 Storage Location....................................................................................................................................................... 55
4.7.2 Alarm Record............................................................................................................................................................. 56
4.7.3 Local Alarm Location................................................................................................................................................ 56
4.7.4 Record Schedule....................................................................................................................................................... 56
4.8 Firewall.............................................................................................................................................................................. 57
4.9 System............................................................................................................................................................................... 58
4.9.1 Back-up& Restore.....................................................................................................................................................58
4.9.2 System Upgrade....................................................................................................................................................... 59
4.9.3 Patch Installation.......................................................................................................................................................61
4.9.4 Factory Reset............................................................................................................................................................ 62
4.9.5 Reboot........................................................................................................................................................................ 62
5 Phone APPs
..........................................................................................................................................................
62
6 Appendix
...............................................................................................................................................................
63
6.1 Frequently Asked Questions.......................................................................................................................................... 63
6.1.1 Install the ActiveX of Firefox browser, Google Chrome and IE Chrome.......................................................... 63
6.1.2 Uninstall the ActiveX of Firefox browser, Google Chrome and IE Chrome..................................................... 66
6.1.3 I have forgotten the administrator password........................................................................................................ 67
6.1.4 Subnet doesn’t match...............................................................................................................................................67
6.1.5 Camera can not record............................................................................................................................................ 67
6.1.6 No Pictures Problems...............................................................................................................................................67
6.1.7 Can’t access IP camera in internet........................................................................................................................ 68
6.1.8 UPnP always failed...................................................................................................................................................69
6.1.9 Camera can not connect wireless.......................................................................................................................... 69
6.2 Default Parameters..........................................................................................................................................................69
6.3 Specification......................................................................................................................................................................69
6.4 CE & FCC..........................................................................................................................................................................70
7 Obtaining Technical Support
...........................................................................................................................
71
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
3
Security Warning
Safeguarding Your Privacy
Foscam cameras require good security practices to safeguard your privacy. You can help protect your camera
by changing the default username and/or password. Input a username and/or password that is at least 8 – 10
characters or longer. Try to use a combination of lower-case and upper-case letters as well as numbers and
special characters. The more complex the username and password, the harder it will be to guess by an
unauthorized user.
You should update your camera regularly at http://www.foscam.us/firmware.html. Make sure your camera has
the latest firmware installed for your specific camera model. The latest firmware for Foscam cameras utilizes
protection against various types of online hacking, cracking, and unauthorized access. Doing so will make your
device more secure, may add features, and will contain bug fixes to make your device work faster.
1 Overviews
FOSCAM FI9805P is an integrated wireless IP Camera with a color CMOS sensor enabling viewing resolution
1280 x 960. It combines a high quality digital video camera, with a powerful web server, to bring clear video to
your desktop from anywhere on your local network or over the Internet.
FI9805P supports the industry-standard H.264 compression technology, drastically reducing file sizes and
conserving valuable network bandwidth.
The IPCAM is based on the TCP/IP standard. There is a WEB server inside which could support Internet
Explore. Therefore the management and maintenance of your device is simplified by using the network to
achieve the remote configuration and start-up.
The camera is designed for outdoor surveillance applications such as courtyards, supermarket, and school.
Controlling the IPCAM and managing images are simplified by using the provided web interface across the
network utilizing wireless connectivity.
FOSCAM provides Smart Phone APP for Android and iPhone users, please search and install Foscam Viewer
on Google Play for Android devices, search and install Foscam Viewer on APP Store for iOS devices, then you
can view your camera anywhere, anytime on your smart mobile devices.
Please note to change your default username and password once you have initially logged into your
Foscam camera. Changing your default user settings enables better protection against any types of
attacks against your camera.
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
4
1.1 Key Features
Standard H.264 video compression algorithm to satisfy the transmission of high definition video in narrow
bandwidth network
1.3 Mega-Pixel
Supports IE/Firefox/Google/Safari browser or any other standard browsers
Supports WEP,WPA and WPA2 Encryption
Wi-Fi compliant with wireless standards IEEE 802.11b/g/n
IR night vision (Range:30m)
Supports image snapshot
Supports dual-stream
Supports IR-Cut and the filter change automatically
Embedded FOSCAM DDNS(dynamic domain name service) Service
Supports remote viewing & record from anywhere anytime
Multi-level users management with password protection
Motion detection alert via email or upload image to FTP
Supporting Third Party Domain name
Providing Phone APPs for Android and iPhone users
Supports multiple network protocols: HTTP /HTTPS/ RTSP/ TCP /IP /UDP /FTP /DHCP /DDNS / UPNP
/ONVIF
Providing Central Management Software to manage or monitor multi-cameras
1.2 Read Before Use
Please first verify that all contents received are complete according to the Package Contents listed below.
Before the Network Camera is installed, please carefully read and follow the instructions in the Quick
Installation Guide to avoid damage due to faulty assembly and installation. This also ensures the product is
used properly as intended.
1.3 Packing Contents
● IPCAM×1 ● Network Cable×1
● Wi-Fi Antenna×1 ● CD×1
● DC Power Supply×1 ●Quick Installation Guide ×1
● Mounting bracket×1 ● Security Warning Card × 1
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
5
1.4 Physical Description
Front Panel
Figure 1.1
1 WIFI Antenna: Wireless Antenna
2 Infrared LED: 36 IR LEDs
3 LENS: CMOS sensor with fixed focus lens
4 Induction IC
Interface
Figure 1.2
1） Reset button :Press and hold on the reset button for 5 seconds. Releasing the reset button, the password
will back to the factory default administrator password. The default administrator user is admin with no
password.
2） Audio input interface: The jack is used to plug external microphone.
3） Audio output interface: The jack is used to plug external speakers.
4） LAN: 10/100M adaptive Ethernet interface. Through this interface, IPCAM can be connected with various
network devices, such as hub, router, etc.
1
2
345
1
2
3
4
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
6
5） Power Interface: Connect the external power adapter, request for 12V/2A power.
Bottom View
There are up to two labels located at the bottom of the camera; this is an important feature of original Foscam
cameras. If your camera does not have labels as shown in Figure 1.3, it may be a clone. Cloned Foscam
cameras can not use original firmware and are not eligible for warranty or technical services.
Figure 1.3
2 Accessing the Network Camera
This chapter explains how to access the network camera through web browsers and RTSP players.
2.1 Access the Camera in LAN
This camera support HTTP and HTTPS protocols, so here will allow you to use HTTP and HTTPS Port No.
(1) Http:// LAN IP + Http Port No.
Double click the IP Camera Tool icon and it should find the camera’s IP address automatically after you plug in
the network cable.
Product Label & SN Label
& QR NO.
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
7
Figure 2.1
Double click the IP address of the camera; your default browser will open to the camera login page.
(2) Https:// LAN IP + Https Port No.
The default https port No. is 443. You can use the url to access the camera: https:// LAN IP + HTTPS port.
Go to Settings - Network - Port panel , you can see and change the https port No.
Figure 2.2
2.2 Access the Camera in WAN
2.2.1 Static IP Addresses
Users who have static IP addresses do not need to set DDNS service settings for remote access. When you
have finished connecting the camera using the LAN IP address and port forwarding, you can access the
camera directly from the Internet using the WAN IP address and port number.
How to Obtain the WAN IP address from a public website
To obtain your WAN IP address, enter the following URL in your browser: http://www.whatismyip.com.The
webpage at this address will show you the current WAN IP.
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
8
Figure 2.3
Access your IP Camera from the Internet
You can access the IP Camera from the Internet (remote access). Enter the WAN IP address and port number
in your standard browser. For example, you would enter http:// 183.37.28.254:85
NOTE :
Make sure port forwarding is successful. You can do port forwarding two ways.
1. Login to your router to enable the “UPNP” function. You can then login to the camera as administrator,
choose Network, and then choose UPnP to enable UPnP. Make sure that the status of UPnP reads “UPnP
Successful” on the Device Status page.
2. Do port (HTTP port) forwarding manually.
If your router has a Virtual Server, it can do port forwarding. Add the camera’s LAN IP and port which you had
set earlier to your router’s port forwarding settings.
NOTE: If you plug the camera into a router, it will have a dynamic IP address and you need to set DDNS
service settings to view it remotely.
Step 1: Enter the username and password of the Administrator , and click “OK” to apply changes.
Step 2: Wait around 10 seconds, you’ll see that the camera’s LAN IP address has changed. In our example it
was changed to 2000, so we see http://192.168.8.102:2000 in IP Camera Tool. Also, the LAN IP address is
now fixed at a static IP address of http://192.168.8.102:2000. This IP address will not change even if the
camera is powered off and back on, the camera will remain on this LAN IP address. This is very important that
a static LAN IP address is set, or you may have problems later with remote access and seeing the camera
remotely if the camera loses power and reconnects on a different LAN IP address. Make sure you set a static
LAN IP address!
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
9
2.2.2 Dynamic IP Addresses
DDNS is a service that allows your IP Camera, especially when assigned with a dynamic IP address, to have a
fixed host and domain name. This means that even though your WAN IP address is constantly changing, you
will have a fixed hostname you can use to access your cameras at all times. You can access the camera
directly from the Internet using the hostname and port number.
What is the HTTP Port no.?
1) Default HTTP Port is 88
All cameras have the default HTTP port of 88. For example, if the LAN IP link of the camera is
http://192.168.1.110:88, this means that the camera’s HTTP port is 88. You can change port 88 to another port
if you’d like such as 2000 or 8090, which will not be conflict with other existing ports like 25, 21,10000.Here you
can set the port no. between 1 and 65535.
2) Change the default http no.88 to another one.
How to assign a different HTTP Port No. and fixed the LAN IP of the camera by the IP Camera Tool？
Step 1:Open the IP Camera Tool, select the camera you would like to change the port of, right click on the IP
address, and click on ”Network Configuration”, this brings up the network configuration box as shown in Figure
2.4 and 2.5.
Figure 2.4
Select which camera
you’d like to change the
port for, and right click
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
10
Figure 2.5
Step 2: Modify the Http Port and enter the username and password of the Administrator , and click “OK” to
apply changes.
Step 3: Wait around 10 seconds, you’ll see that the camera’s LAN IP address has changed. Also, the LAN
IP address is now fixed at a static IP address of http://192.168.1.110:2000. This IP address will not change
even if the camera is powered off and back on, the camera will remain on this LAN IP address. This is very
important that a static LAN IP address is set, or you may have problems later with remote access and seeing
the camera remotely if the camera loses power and reconnects on a different LAN IP address. Make sure you
set a static LAN IP address!
Figure 2.6
What is Port forwarding?
If you have never done port forwarding before, you can open and view the following link to understand the
basic concept. Port forwarding allows for outside connections to access a specific device on your network from
anywhere in the world. Every router automatically blocks any incoming connections for safety purposes. Using
port forwarding, you are telling your router to allow a connection through a certain port (you can think of it as a
gateway) into your router. You set this port to a specific device, in our case an IP Camera, so it can be
accessed from anywhere in the world.
Click this link to learn more about port forwarding: http://portforward.com/help/portforwarding.htm
How do we configure Port Forwarding?
For this section, we will be using an example:
Let’s say the camera’s LAN IP address is http://192.168.1.110:2000
Modify the Http Port.
Enter the Username and
password, click OK.
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
11
Step 1: Login to the router, and go to your router’s port forwarding or port triggering menu. Sometimes this is
also under the name of Virtual Server or NAT.
Using the Linksys brand router as an example, we would log into the router, and go to the Applications
& Gaming menu. We would then click on the “Single Port Forwarding” sub-menu.
Step 2: Create a new column using the LAN IP address & HTTP Port of the camera within the router as shown
below, then push OK or Submit to save your settings:
Figure 2.7
First method :
Use the embedded DDNS to access the camera via the Internet
Each Foscam camera has an embedded unique DDNS domain name, the format of this domain name is
xxxxxx.myfoscam.org. On the bottom of the camera, you can see the domain name sticker with this
information on it.
For example, we can use test09.myfoscam.org. In the camera, click Settings at the top, click “Network” on
the left, then click “DDNS” to get to the DDNS settings page. Here you can see the unique domain name of
your camera.
Figure 2.8
Now you can use “http://Domain name + HTTP Port” to access the camera via the Internet.
Take hostname test09.myfoscam.org and HTTP Port of 2000 for example, the URL link to access the
Fill the HTTP Port of the
camera in the columns of
External Port and Internal
Port. Example: 2000
Fill in this section with the
LAN IP of the camera; we
would enter “100” for our
example.
Assign a name for the
port forward setting here
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
12
camera via the Internet would be http:// test09.myfoscam.org:2000.
Second method :
Use the Third party DDNS to access the camera via the Internet
Step 1, Please go to the third party DDNS website(such as www.no-ip.com) to create a free hostname.
Step 2, DO DDNS Service Settings within the Camera
Please set DDNS Settings within the camera by hostname, a user name and password you’ve got from
www.no-ip.com
Take hostname ycxgwp.no-ip.info, user name foscam, password foscam2012 for example.
Firstly, goes to option of DDNS Settings on the administrator panel.
Secondly, select No-Ip as a server.
Thirdly, fill foscam as DDNS user, fill password foscam2012 as DDNS password, fill ycxgwp.no-ip.info as
DDNS domain and server URL, Then click save to make effect. The camera will restart and to take the DDNS
settings effective.
Fourthly, after the restart, login the camera, and go to option of Device Status on the administrator panel, and
check if the DDNS status is successful.
If failed, please double check if you have input the correct hostname, user name, and password, and
try to redo the settings.
NOTE:
If you have set Third Party DDNS successfully ,the Foscam Domain Name will be invalid. The Third Party
DDNS and the Foscam Domain Name cannot work at the same time, the last time you configured will take
effect.
2.3 Using the VLC player
This camera supports RTSP streaming, here you can view the camera using VLC player.
RTSP URL rtsp:// [user name][:password]@IP:HTTP port number/videosream
The part in the square brackets may be omitted.
user name & password:
The user name and password to access the camera. This part can be omitted.
IP: WAN or LAN IP address.
Videostream:
Here support three mode: videoMain, videoSub and audio. When the network speed is bad, here you had
better select videoSub. If you select audio, you can only hear the sound but cannot see the video.
For example:
IP: 192.168.1.11
HTTP Port number: 88
User name: admin
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
13
Password: 123
Here I can enter one of the following URLs in the VLC.
1) rtsp://admin:123@192.168.1.11:88/videoMain
2) rtsp:// @192.168.1.11:88/videoMain
3) rtsp://:123@192.168.1.11:88/videoMain
4) rtsp://admin@192.168.1.11:88/videoMain
Open the VLC, and go to MediaOpen Network Stream option, then enter the URL into VLC.
Figure 2.9
Figure 2.10
Sometimes you may need to enter the user name and password again. Click OK and you can see the real-time
preview.
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
14
Figure 2.11
Figure 2.12
If you cannot play the video in the VLC player, please check the port mapping. You can read Quick Installation
Guide about How to configure port forwarding.
NOTE:
If you modify the camera’s username or password, you had better reboot the camera, or else the
new username and password cannot take effect when you enter the authentication in the VLC.
2.4 IP camera connection to the server
Device supports ONVIF 2.2.1 protocol,You can easily access the NVR with ONVIF or server with ONVIF.
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
15
3 Surveillance Software GUI
Please refer to the Quick Installation Guide if you install the camera at first time. After finishing quick installation, you can take
time to learn the operation of the software.
3.1 Login Window
Figure 3.1
Section1 Enter the Username and password
The default administrator username is admin with no password, please change the password at first using and
prevent unauthorized users login the camera .
Section2 Stream
The camera supports two stream modes: Main stream and sub stream. If you want to access the camera form
LAN, here you can select Main stream. If you want to access the camera from Internet, here we recommend
sub stream.
Note: When the network bandwidth is bad you’d better select Sub Stream and the video will be more fluent.
Section3 Select the language
You can select the language you need by clicking on the language dropdown list.
Section4 login the camera
Click “Login” button.
NOTE：
When setting up your camera for the first time, it will request that you modify the default username and/or
password if both are still set to default. Input the new username and password, click "Modify" to complete the
modification. You will now use the new username and password to login the camera in the future.
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
16
Figure 3.2
After logging in for the first time, you will go to “Setup Wizard”automatically. Here you can set the basic
parameters of camera, such as camera name, camera time, wireless settings, IP configuration.
Figure 3.3
Device Name: You could give name for your camera.
Figure 3.4
System Time: Select the time zone you need to set the date, time,format, etc.
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
17
Figure 3.5
Wireless networks: Click “Scan”, find the SSID of your wireless router, select and enter the password.
Figure 3.6
IP: Set IP address of the camera. You could choose to obtain an IP automatically or set the IP address
according to your needs.
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
18
Figure 3.7
NOTE:
It needs about 1 minute to connect the camera to your router.
3.2 Surveillance Window
Figure 3.8
1
2
4
7
3
5
6
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
19
Section1 FOSCAM Logo/ Live Video / Settings buttons
: FOSCAM LOGO
: Path to surveillance window. Click this button and back to the surveillance window
: Path to Administrator Control Panel, Click it, and it will lead to Administrator Control Panel and
do advanced settings.
Section2 Multi-Device Window
The firmware inside the camera supports up to maximum of 9 cameras being monitoring at the same time. You
can add other cameras in multi-camera panel (read chapter 4.3.4).
Figure 3.9
Section3 Mode/ Stream / Mirror/ Flip buttons
Mode
1) 50HZ ---------Indoor surveillance (Region: Europe, China)
2) 60HZ ---------Indoor surveillance (Region: USA, Canada)
3) Outdoor Mode------Outdoor surveillance
Stream
The default Stream supports four modes: 0/720P/30fps/2M, 1/VGA/25fps/4M, 2/VGA/15fps/1M and
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
20
3/VGA/10fps/200 The format of the stream type is Stream type no. / Resolution / Maximum frame rate/ Bit
rate
1) Stream type no. : The number is used to identify the stream type.
2) Resolution
There are some resolutions, the bigger one is 720P, and the smaller one (VGA) is 640x480 pixels. The bigger
the resolution, the better of the image quality is. If you are accessing the camera via internet and want to get
more fluent video streaming, please select resolution VGA.
3) Maximum frame rate
When the video format is 50Hz, the maximum frame rate is 25 fps. When the video format is 60Hz, the
maximum frame rate is 30 fps. You should lower frame rate when the bandwidth is limited. Normally, when the
frame rate above 15, you can achieve fluently video.
4) Bit rate
Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should
combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is large, that will
lead to video cannot play well.
You can reset the stream type on Settings-> Video-> Settings panel.
After changing, please re-login the camera and you can see the modification.
Section4 IR LED Lights
Click Infra led and there are three modes to adjust the infrared led: Auto, Manual and Schedule.
Auto: Select it and the camera will adjust the infra led (on or off) automatically.
Manual: Select it and you can turn on or turn off the infra led manually.
Schedule: Select it and the IR led light will be off at the schedule period. If you want to define or change the IR
led lights schedule time, please go to Settings -> Video -> IR LED Schedule page.
Section5 Image quality settings
In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality.
w
w
www
www
.foscam.
.foscam.usus
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
21
Section6 OSD
If you have added time and camera name in the video, you can see it in the live window.
Go to Settings ---Basic settings---Camera name panel, and you can change another device name. The
default device name is anonymous.
Go to Settings ---Basic settings---Camera time panel and adjust the device time.
Go to Settings ---Video---On Screen Display panel, you can add or no add OSD.
Section7 Play/Stop/ Talk/Audio/ Snap/ Record/ Full screen button
1------Play Click it to play the video of the camera
2------Stop Click it to stop the video of the camera
3------ Talk: Click the button and the icon will become to , then talk to the microphone that connected
with PC, people around the camera can hear your voice if the camera has connected with audio output device.
Click the icon again and stop talking.
4------ Audio Click the button and the icon will become to , you can hear the sound around the camera if
the camera has connected with other audio input device through the Audio Input port of the camera, Click the
icon again and stop audio.
5----- Snap: Click it to make snapshot and it pop up a window which picture you snapshot, right click in the
window and save the picture to anywhere you want.
6----- Record: Click the icon and the camera start recording, you can see a green dot in the live window.
Click again and stop recording. The default storage path is C:\IPCamRecord. You can change the storage path:
Go to Settings- >Record-> Storage Location panel.
7------Full Screen Click it to make full-screen, or you can double click the surveillance screen to make
full-screen. Double click again and exit full-screen.
Onscreen Mouse Control
Right click the mouse and you can adjust the screen ration, full screen and Zoom up.
1235674
Loading...