Foscam FI8904W, FI8905W, FI8919W, FI8905E, FI8906W Quick Installation Manual
2 Software Installation
1. Insert the CD into the CD drive of your computer.
Note:
If your computer doesn’t have CD drive, you can download the
Equipment Search Tool from our website for free.
3 Access the Camera
1. Enable the DHCP feature of your router (Enabled by default normally),
then open the Equipment Search Tool program. It should display the
camera’s IP address in your LAN (Local Area Network).
2. Double click the camera list here, and your default browser will open
up to the camera’s login page.
1 Hardware Introduction
Package Contents
Quick Installation Guide
Wi-Fi Antenna
Resource CD Ethernet Cable
Power Adapter
Mounting Bracket
(except FI8919W) (except FI8905E)
IP Camera
Warranty Card
Physical Description
Hardware Connection
1. Mount the antenna and make it stand vertically(only for the device
with external antenna).
2. Connect the camera to the LAN network (router or switch) via
ethernet cable.
3. Connect the power adapter to the camera.
V1.7
EQ890411
2. Go to the folder “Equipment Search Tool” and nd the folder “For
Windows OS”or “For Mac OS”. Copy and paste the Equipment Search
Tool le to your computer, or drag it onto your Desktop.
Security Warning
Foscam cameras and NVRs require good security
practices to safeguard your privacy. You should
regularly change your camera or NVR password which is
8-10 numbers, letters, symbols combination.
You should update your camera or NVR regularly. Make
sure your camera or NVR has the latest rmware
installed for your specic model and better experience.
Note：
There are three login methods. According to the gure prompted,
choose a dierent login mode.
Quick Installation Guide
（For Windows & Mac OS）
Outdoor IP Camera
Model:FI8904W Model:FI8905W Model:FI8906W
Model:FI8905E Model:FI8919W
4. Take Microsoft Internet Explorer as an example.For the rst time
login the camera,please make sure to install ActiveX when prompted.
Click this button and install
the ActiveX .
5. Click Run button, and re-login the camera, you can see the live
video on the interface.
If you use Firefox, Google
Chrome, Safari, select this
login mode.
If you use IE browser,
select this login mode.
If you use Mobile phone,
select this login mode.
Quick Installation Guide
（For Windows & Mac OS）
Outdoor IP Camera
Model:FI8904W Model:FI8905W Model:FI8906W
Model:FI8905E Model:FI8919W
3. When you log in for the rst time, it will request that you modify the
default username and/or password . Input the New username, New
password and Conrm the password, click Conrm to complete the
modication. You will now use the new username and password to log
in to the camera in the future.
CE Certicate Website:
http://www.foscam.com/company/ce-certicate.html
Infrared LED
LENS
Antenna
LAN
Power
Reset Button
WPS
Model Wireless
PoE(Power over
Ethernet)
Pan/Tilt
Differences
FI8904W
FI8905W
FI8905E
FI8906W
FI8919W
√
√
√
√
√
×
×
×
×
×
×
×
×
×
√
Click Run .
Default user name
is admin with no
password.
ShenZhen Foscam Intelligent Technology Co., Ltd
www.foscam.com
Notes:
1. If you forget your username or password, you can press and hold
the reset button on the bottom of the camera using a pin for 5
seconds. This resets the camera to factory defaults .
2. If you want to access your camera over wireless or the Internet,
please continue with the setup by following the Wireless Connection
and Remote Access steps below.
FI8905E don’t support WIFI.
4 Wireless Connection Settings
6. Please click the Submit button after all settings have been entered, the
camera will reboot. After the camera has completed the reboot process,
wait 10 seconds and disconnect the ethernet cable.
5 Remote Access
7 Technical Support
1. Please choose “Device Management > Wireless LAN Settings”, click
“Wireless LAN Settings”.
2. Enable “Using Wireless LAN” on the “Wireless LAN Settings” page.
3. Click the Scan button and the camera will detect all WIFI devices
around the area. It should also display your router in the list.
4. Click the SSID of your router in the Wireless Network list, the
corresponding information (SSID & Encryption) will be lled in the SSID
boxes automatically.
5. You will only need to ll in the Share Key . Make sure that SSID,
Encryption and Share Key you lled in for the camera are exactly the
same for your router.
If you need to access your IP camera outside of your LAN, you need to
congure some settings on your router. Please follow the
corresponding steps:
1. Run the Equipment Search Tool, and assign an IP address for your
camera.
Click the SSID of router and SSID,
Encryption will be lled in the
following box automatically .
Enter the same share
key with your router.
2. Enter the name of the User and Password of the Administrator
(default user is admin, no password), and click the button ”OK” to
apply the modication. The camera will reboot once the modication
is done.
6 Access the IP Camera by
Smart Phone
If you want to access your camera on smart phone, please search and
install Foscam Viewer on Google Play for Android devices, or search
and install Foscam Viewer on APP Store for iOS devices.
For details, please refer to the Android or iOS User Manual in the CD.
If you have problems with your Foscam IP camera, please contact the
Foscam reseller you purchased from, or you can e-mail the Foscam
headquarter technical support team: tech@foscam.com .
Your valuable comments and suggestions on improving Foscam
products are welcomed !
192.168.1.107
80
80
192.168.1.1078080
3. Enable UPnP and DDNS in the camera’s settings page. We
recommend you to use the Foscam DDNS by factory default, but if
you want to use the third party DDNS, please check the user manual
for further instructions.
5. Now you can access your IP camera by http://domain name:HTTP
port via the Internet.
Here you have nished the Port
Forwarding setup.
4. Congure port (HTTP port) forwarding on your router. For these
steps, we will be using the TP-LINK brand wireless router as an example.
First, we need go to the “Forwarding -Virtual Servers” panel for setup.
For other brands, you can check the user guide or user manual of the
router, or consult the manufacturer.
You can see the port of your camera here.
If you want to set Remote Access for several cameras on the same
network, you will need to change the HTTP port for each camera.
Input the port and IP address
of your camera and click Save.
Click Add New.
Right click your camera and
click Network Conguration.
Input the Username and
password, click OK.
IP Address: Set this in the same
subnet as your computer , or keep
it as default.
Subnet Mask: Keep it as default.
Gateway and DNS Server: Set it
to the IP address of your router.
Loading...