Page 1
Ani Wi-Fi Alarm System
MANUAL
Page 2
TABLE OF CONTENTS
FEATURES
APPEARANCE
1
2
3
4
APP
REGISTER
CONNECTING TO WIFI NETWORK
DEVICE LIST
CHANGE THE DEVICE PASSWORD
APPLICATION OPERATION
5
ARM/DISARM
SMART HOME
ALARM CONTACT NUMBERS
ZONE SETTINGS
ARM/DISARM
ACCESSORIES
ADDING OTHER WIRELESS ACCESSORIES
REMOTE CONTROL MANAGEMENT ZONE NAME ZONE TYPE
ZONE TYPES AND THEIR FUNCTION SIREN DELAY SETTING RING TIME
PANEL OPERATION
6
TECHNICAL PARAMETERS
ADD REMOTE CONTROL DELETE REMOTE CONTROLS ADD SENSORS
DELETE SENSORS
1
2
3
4
5
6
7
1
2
4
5
5
7-10
ALARM LOG
SCHEDULE ARM/DISARM
SCHEDULE OUTLET TIMER
MONITOR
PANEL SETTINGS
ALARM NOTIFICATION ALARM VOLUME RING TIMES ALARM AUDIO
BEEP VOLUME PANEL NAME PANEL PASSWORD PANEL TIME
SYSTEM SETTINGS
11
11
12
13
14
14-18
19
19
20
20-23
24
24-25
ADD STROBE SIREN ADD SMART OUTLET
STATUS LIGHT INDICATION
CONTROL THROUGH LAND LINE
26
27
28
Page 3
APPEARANCE
FEATURES:
Operation by voice instruction.
Supports 2.4G WIFI wireless network.
Real-time host feedback to the application.
Supports multiple alarm operations.
Compatible with IOS/Android operating systems.
8 customizable zones with independent arm/disarm.
Zones can be named individually.
Up to 3 telephone alarm contacts.
Power failure notification.
4 arm/disarm scheduling groups.
Control 8 smart sockets, 1 alarm siren and 1 linkage switch.
4 linkage switch schedules.
Adjustable panel voice/alarm volume.
1
Page 4
2
Press “Create an Account”.
Select “Email Register”.
Type in the email address you would like your account be assigned to.
Next, type in the password you would like to use.
Press Confirm.
APP
IOS/Android
Registration by Email
If you have not used the Ani application before, you will need to create an
account. Follow the below steps.
Scan the compatible QR code to download the app or search
“Fortress Ani WiFi” in the App Store or Google Play.
REGISTER
Page 5
3
CONNECTING TO WIFI NETWORK
In the application go to the “Device list” and press the “+” button in the
top right hand corner.
Next, press the “I want to configure a new device” button at the button
of your screen.
Enter your WiFi network password then press Next.
Press and hold the button until the panel says “WiFi configuring, please
enter WiFi password on the app”. The light will start flashing white.
Press the “Start Configure Button”
A timer will start counting down from 60 seconds.
Once the ANI device connects the white flashing light will turn green.
In the Device List, click on the W1 device to use the application.
Page 6
4
DEVICE LIST
CHANGE THE DEVICE PASSWORD
There are three options under the device list page; Bound Device, Find
New Device, and Offline Device.
Click on any device under the “Bound Device” list.
Click the button in the top right hand corner.
Select Settings
Click on “Device Password” then type in your new password.
Lastly, press confirm
STATUS DESCRIPTION
BOUND DEVICE
FINE NEW DEVICE
OFFLINE DEVICE
The device is connected to the network
successfully and the phone has
connected to the device.
The device is connected to the network
but the phone has not connected to
the device.
The device had previously been
connected to the network but has
become disconnected.
Page 7
APPLICATION OPERATION
5
ARM/DISARM
SMART HOME
To arm in away mode, press the button.
To disarm the system, press the button.
To arm in home mode, press the button.
There can be up to 8 smart outlets on the ANI system. There is an
toggle switch and an toggle switch for each outlet. Each outlet
can be turned on/off by toggling the switch.
If you would like to rename each outlet, click on the outlet number and
enter a new name. Press confirm to finish.
Page 8
6
ALARM CONTACT NUMBERS
Adding Phone Numbers
Delete Phone Numbers
To add a phone number open your Ani Wifi application.
Scroll to “ALARM NUM” on your menu bar.
Press the Add One button.
Type in the number that you would like to use.
Press Confirm to finish.
If you need a number in front of the phone number, insert the * icon
which will delay by 1s when dialing. For example: 0*12345678.
You can have a total of 3 phone numbers.
Open your Ani Wifi application.
Scroll to “ALARM NUM” on the menu bar.
Press the DELETE button.
Select which numbers you want to delete by pressing the red delete
button.
Page 9
ZONE SETTINGS
Remote Management
The Ani system has 1 zone for remote management (8 zones). There are
8 different zones for sensors, all of which can hold 10 sensors. Each
defense zone can be armed/disarmed independently.
Open you Ani WiFi application.
Scroll to “ZONE SET” on your menu bar.
Click on “Remote Management”
If sound is turned on, the sirens will chirp when the system is
armed/disarmed.
Click on the sound toggle to turn it off.
Open your Ani WiFi application.
Scroll to “ZONE SET” on your menu bar.
Press on the zone you would like to change the name of.
Click on the icon.
Select from the preset option or create a custom name.
Press the button to finish.
Zone Name
There are 8 different zones that can be renamed. To modify their
names, follow the steps bellow:
7
Page 10
8
Zone Type
Open your Ani WiFi application.
Scroll to “ZONE SET” on your menu bar.
Press on the zone you would like to change the zone type on.
Press on the icon.
Select which zone type you want then press the button to finish.
Each zone can have their type changed individually. There are 8
different zone types to choose from. To change the zone type follow
the steps bellow:
Page 11
9
Siren
Zone Types And Their Function
TYPE DISARMED ARMED STAY ARMED ADDITIONAL FEATURES
ORDINARY
STAY ARM
INTELLIGENT
EMERGENCY
CLOSED
DOORBELL
CHIME
ELDER
Inactive
Inactive
Inactive
Active
Inactive
Inactive
Inactive
Active
Active
Active
Active
Active
Inactive
Inactive
Active
Active
Active
Inactive
Inactive
Active
Inactive
Inactive
Active
Active
Needs to be triggered twice within
30 seconds to activate the alarm.
The sensor will cause the panel to
play a doorbell sound
Sensor causes the system to play a
chime sound when the system is
disarmed
Open your Ani WiFi application.
Scroll to “ZONE SET” on your menu bar.
Choose the zone you are wanting to change.
Click the button to turn off any wireless sirens.
Click the button to turn off the built in siren on the Ani Hub.
Each of the 8 zones can have all sirens turned on/off or have just the
outside sirens turned off. To do so, follow the steps bellow:
Alarm will be triggered but no sirens
will sound.
Page 12
10
Delay Settings
Each of the 8 zones can have entry and exit delays set individually. The
change the delay time, follow the steps bellow:
Note: Time is measured in seconds
Note: Time is measured in seconds.
Open your Ani WiFi application.
Scroll to “ZONE SET” on your menu bar.
Choose the zone you are wanting to change.
Press the button to change the arming delay time (exit delay).
Press the button to change the alarm delay time (entry delay).
Ring Time
Open your Ani WiFi application.
Scroll to “ZONE SET” on your menu bar.
Choose the zone you are wanting to change.
Press the button the change the alarm time.
Press the button to finish.
Each of the 8 zones can have an alarm time set individually. The change
the alarm time, follow the steps bellow:
Note: Time is measured in minutes.
Page 13
11
ALARM LOG
Open your Ani WiFi application.
Scroll to ALARM LOG on the menu bar.
All alarm events will be saved in the alarm log. To find the alarm log
follow the steps below:
SCHEDULED ARM/DISARM
Open your Ani WiFi application.
Press the button in the top right hand corner.
Press the button which says “Arm Timing”.
Press the button in the top right hand corner of your screen.
Select the time you would like to use.
Select which days you would like the auto arm/disarm to take
place.
For example 1 = Sunday and 7 = Saturday.
Decide if you want the automation to be for arming or disarming
the system by toggling the arm/disarm switch.
Press “Setting” in the top right corner to finish.
The system can be set to arm/disarm at set times each day. To set
what time of day you want to arm/disarm your system, follow the
steps bellow:
Page 14
12
SCHEDULED OUTLET
The system can be set to automatically turn its outlets on or off at a set
time every day. To set what time of day the outlets are turned on/off
follow the steps bellow:
Open your Ani WiFi application.
Press the button in the top right hand corner.
Press the button which says “Arm Timing”
Press the button in the top right hand corner of your screen.
Select which time of day.
Select which days the outlet turns on/off.
For example, 1 = Sunday and 7 = Saturday.
Decide if the automation event will be for turning on or off the outlet.
Select which outlet number will be effected by the automation.
Press “Setting” in the top right corner to finish
Page 15
Open your Ani WiFi application.
Scroll top “MONITOR” on the menu bar.
Click on whichever camera you would like to view.
To close the live feed, press the button.
If you just want to quickly view your camera in real time on the Ani WiFi
application, follow the steps below:
4
13
Open the N62 application.
Press the Register button at the bottom of the screen.
Register by either email or phone.
Login with the account you have created.
For details on how to sync camera, refer to the camera manual.
MONITOR
In order to maximize the features available with the Fortress Eyesight
camera, an auxiliary application is needed. Download the N62
application from the Play Store for Android or the App Store for IOS. Once
the application has been downloaded, follow the steps bellow:
Open your Ani WiFi application
Press the button in the top right hand corner.
Press the button which says “Monitor”.
The N62 application will open.
Select the camera that you would like to view.
Once you have downloaded the N62 application follow the following
steps to get to it from the Ani WiFi application:
Page 16
To receive alarm notifications, push notifications will need to be turned
on for the Ani WiFi system. If enabled, the application will send
notifications to your phone letting you know the alarm was set off.
Open your Ani WiFi application.
Press the button in the top right hand corner.
Press the button which says “Settings”.
Press and hold the “Alarm VOL” button while sliding it side to side to
adjust volume.
PANEL SETTINGS
Alarm Notification
Alarm Volume
14
Page 17
Open your Ani WiFi application.
Press the button in the top right hand corner.
Press the button which says “Settings”.
Press and hold the “Ring Times” button while sliding it side to side to
adjust the ring time.
4
15
Ring Times
Open your Ani WiFi application.
Press the button in the top right hand corner.
Press the button which says “Settings”.
Select “Alarm Audio”.
Scroll through the list to select which tone you want.
Press the button to finish.
Alarm Audio
There are different alarm tones that you can choose from for the hub
alarm. To change those tones following the steps below:
The Ring time setting adjusted how long it will take before the Ani
system picks up when hooked to a land line.
Page 18
16
BEEP VOLUME
The beep volume adjusts the voice/beep volume level. To change the
volume follow the steps bellow:
Open your Ani WiFi application.
Press the button in the top right hand corner.
Press the button which says “Settings”.
Press and hold the “Beep VOL” button while sliding it side to side to
adjust the volume.
Panel Name
The devices name can be changed to make managing your Ani WiFi
devices easier to manage. To change the name follow the steps below:
Open your Ani WiFi application.
Press the button in the top right hand corner.
Press the button which says “Settings”.
Press “Device Name”
Type in the name you want.
Press confirm to finish.
16
Page 19
17
Panel Password
If you would like to change the password for your device, follow the steps
below.
Open your Ani WiFi application.
Press the button in the top right hand corner.
Press the button which says “Settings”.
Select “Device Password”.
Type in the password you would like to use.
Press confirm to finish.
Page 20
18
Open your Ani WiFi application.
Press the button in the top right hand corner.
Press the button which says “Settings”.
To set manually, click on the date and time, then set the time
manually.
To automatically set, press “RESET”
Panel Time
The panel time can either be manually set or automatically set. To
change the time follow the steps below:
Open your Ani WiFi application.
Press the button in the top left hand
corner of the screen.
Press desired link!
System Setting
If you need to change your account
password, change device, get help, or check
the about page, follow the steps below:
Page 21
19
PANEL OPERATION
ARM & DIARM
All accessories will be active and ready to be triggered. When there is an
emergency, (burglar, fire, gas leak, etc.) the control panel will alarm
immediately. When armed in away mode, the indicator light on your Ani
hub will be red.
REMOTE CONTROL: PRESS THE [HOME ARM].
PANEL CONTROL: PRESS THE [ARM] KEY TWICE.
Away Arm
During home arming mode, all motion detectors are set to be inactive
so individuals can walk around their home without triggering their motion
detectors. In this arming mode all perimeter and emergency sensors will
be left active. When armed in away mode, the indicator light on your Ani
hub will be blue.
REMOTE CONTROL: PRESS THE [OUT ARM]
PANEL CONTROL: PRESS THE [ARM] KEY ONCE.
Home Arm
When your system is disarmed, only the emergency sensors will be left
active. If the alarm is sounding when you press the disarm button, your
sirens will stop sounding. When armed in away mode, the indicator light
on your Ani hub will be green.
REMOTE CONTROL: PRESS THE [DISARM] BUTTON.
PANEL CONTROL: PRESS THE [ARM] BUTTON THREE TIMES.
Disarm
Page 22
20
Press and release the button once, the indication light on your
panel will turn cyan and prompt, “Add remote control”
Press any button on your remote control.
The panel will say, “Add, successfully programmed”.
If the remote is already programmed onto the device, the panel will
beep twice.
Press the or button to exit programming mode.
If Programming state is exited successfully, the panel will revert to a
different color.
ACCESSORIES
ADD REMOTE CONTROLS
Add a remote control using the panel:
Open your Ani Wifi application.
Scroll to “ZONE SET” on your menu bar.
Directly below tap on “Remote Management”.
Press on any open remote. Your panel will say, “Add remote control”.
Press any button on the remote. Your panel will say, “Add,
successfully programmed”.
Add a remote control from the application:
Note: A total of 8 remote controls can be added to the system.
Page 23
21
DELETE REMOTE CONTROL
Press and release the button once, the indication light on your
panel will turn cyan and prompt, “Add remote control”
Press and hold the button for 3 seconds. Your panel will say, “Set,
successfully programmed”.
The panel will revert to previous color letting you know all remotes
were deleted.
Delete remote controls using the panel:
Open your Ani Wifi application.
Scroll to “ZONE SET” on your menu bar.
Directly below tap on “Remote Management”.
Press the red “x” button to delete individual remotes or press the
“Delete All Remotes” button to remove all.
After you press the delete button, the panel will beep once.
Delete remote controls from the application:
Page 24
22
ADD SENSORS
Press the button twice. The panel will prompt, “Add 1 zone”.
While the light is still blue, trigger the sensors you would like to add to
zone 1. Your panel will say, “Add, successfully programmed”.
To program the rest of the zones, 2-8, refer to this table:
Add sensors using the panel:
Open your Ani Wifi application.
Scroll to “ZONE SET” on your menu bar.
Click on the zone you want to add a sensor to. (A dropdown menu
will open)
Click on the button.
Press any open sensor. Your panel will say, “add X zone”.
Trigger the accessory that you want added. Your panel will say, “Add,
Successfully Programmed”
Add sensors from the application:
ZONE NUMBER BUTTON PRESSES
2
3
4
5
6
7
8
3
4
5
6
7
8
9
Page 25
DELETE SENSORS
Press and release the button 2 times. Then press and hold the
button for 3 seconds.
Your panel will prompt, “Set, successfully programmed”
The light will change back to its previous color letting you know all the
detectors in zone 1 were removed.
To delete the sensors in zones 2-8, refer the below table:
Delete sensors from the panel:
ZONE NUMBER BUTTON PRESSES
2
3
4
5
6
7
8
3 + 1 Long Press
4 + 1 Long Press
5 + 1 Long Press
6 + 1 Long Press
7 + 1 Long Press
8 + 1 Long Press
9 + 1 Long Press
Open you Ani WiFi application.
Scroll to “ZONE SET” on your menu bar.
Click on the zone you want to delete a sensor from. (A dropdown
menu will open)
Click on the button.
Press the sensor number that you would like to delete or press the
“Delete All Sensors” button. (Your panel will beep once)
Delete sensors from the application:
23
Page 26
ADDING OTHER WIRELESS ACCESSORIES
Add a Wireless Strobe Siren
Press and hold the SET button on the back of your siren (The light will
come on and stay on).
Press the button to enter wireless accessories learning mode.
Next, press the button to turn the wireless siren on (this will send a
signal to the siren syncing the two together).
The siren will beep 3 times letting you know it was paired correctly.
Press the SET button on the back of your siren to exit the
programming mode.
To test, press the button to sound the siren then press the button
to turn it off.
Add a Wireless Strobe From the Application:
Open the Ani WiFi application
Press the button in the top right hand corner of the screen.
Press the button which says “Settings”
Press and hold the SET button on the back of the siren (the light will
come on and stay on).
Toggle the “Siren Switch” on the application (the siren will beep
several times and the Ani Hub will alarm).
Toggle the “Siren Switch” back off and unplug the siren.
25
24
Page 27
25
Add a Smart Outlet
Press and hold the power button on the Smart Outlet for 5 seconds
(the light will flash then stay off)
Press the button to enter wireless accessories learning mode (The
ANI device will say “Zero”)
Press the button again to add the first outlet. (The ANI device will
say “One”)
Press either the or button to sync the outlet to the device (The
outlet will flash several times showing it was successfully
programmed).
Note: If you would like to add another outlet, press the button
vafter the device says “One”. It will move to outlet 2-8.
Press the power button on the Smart Outlet to complete
programming.
Add a Smart Outlet From the Application
Open the Ani WiFi application
Scroll to “SMART HOME” on your menu bar.
Press and hold the power button on the smart outlet for 5 seconds
(the light will flash then stay off)
Toggle the on/off switch to send a signal to the outlet (the outlet will
flash several times showing it was successfully programmed)
The panel will also say “One On” or “One Off”
Press the power button on the Smart Outlet to complete
programming.
Page 28
CONTROL THROUGH LAND LINE
CALLING INTO THE MAIN PANEL
From your phone, dial the phone number assigned to the landline
plugged into your Ani system.
The system will answer and prompt, “Please enter password”.
Once password has been successfully entered the system will say,
“Password successfully programmed”
Enter the desired command.
1
2
7
8
9
0
*
#
CONTROLLING SMART OUTLETS
From a telephone, smart outlets can be controlled 2 ways. The first way
is to turn all of them on or off as shown above. It is also possible to turn
each of them on/off individually by following the steps below.
The Ani System can be controlled by land line as well as application.
If you don’t have access to internet, this is a great way to control the system.
After device password press #
Input outlet number (1-8)
Press 1 to turn the outlet ON
Press 2 to turn the outlet OFF.
Commands are listed below:
ARM
DISARM
SIREN ON
ALL OUTLETS ON
ALL OUTLETS OFF
EXIT AND HANG UP
SEE BELOW
SIREN OFF
26
Page 29
STATUS LIGHT INDICATION
FUNCTION CONNECTED TO WIFI NOT CONNECTED TO WIFI
AWAY ARMED
DISARMED
HOME ARMED
Red Light On
Green Light On
Blue Light On
Red Light Twinkle
Green Light Twinkle
Blue Light Twinkle
STATUS INDICATOR LIGHT
PROGRAMMING MODE
WIFI CONFIGURING
EMISSION MODE
RESTORING FACTORY DEFAULTS
TOTAL SYSTEM RESET
Cyan
White
Purple Red Flash Indicates “On”
Green Flash Indicates “Off”
Yellow light will flash 10 times followed
by a purple light flashing rapidly.
Red light will flash 10 times followed by
a purple light flashing rapidly.
27
Page 30
TECHNICAL PARAMETERS
28
POWER SUPPLY DC 5V 1A
BUILT-IN BATTERY
BATTY STANDBY TIME
WORKING CURRENT
STANDBY CURRENT
ALARM CURRENT
RADIO FREQUENCY
RECEIVING DISTANCE
RECEIVING SENSITIVITY
LAUNCH DISTANCE
BUILT-IN ALARM DISTANCE
MODULATION METHOD
PANEL LOW VOLTAGE
ACCESSORY PARAMETERS
3.7V 800mAh Lithium Battery
8 Hours
65mA ~ 150mA
65mA ~ 125mA
≥400mA
433mhz
>100M (open area)
-90dBm
100M (Open Area)
80dB
ASK
3.5V (No Voice Prompt and
application suggests low
battery)
Hs1527 Coding, 220K Vibration
Resistance
Page 31
Safety Done Simply
PO Box 991 Walla Walla, WA 99362
www.FortressSecurityStore.com
Loading...