Fortinet FortiAP S423E User Manual
FortiAP S423E
Information
Box Includes
FortiAP S423E Information SupplementQuickStart Guide
5 GHz Antennas (4)
5 GHz
5 GHz
5 GHz
5 GHz
Standard Ceiling Bracket
(2 Sizes)
Recessed Ceiling Bracket
(2 Sizes)
2.4 GHz Antennas (4)
2.4 GHz
2.4 GHz
2.4 GHz
2.4 GHz
Box Includes
Installation
The unit can be mounted on a ceiling using the provided ceiling mounting bracket.
To attach the unit to a ceiling using the ceiling mount bracket:
1. Attach the ceiling mount bracket to the bottom cover of the FortiAP unit by sliding the ceiling the
mount bracket from the left to the right onto the FortiAP Unit.
If extra space is required to accommodate drop ceiling tiles, use the taller ceiling mount bracket.
2. Select an appropriate location, hold the device against the ceiling t-rail, and push the FortiAP unit
onto the ceiling until it snaps into place.
The unit can be removed from the bracket by pressing on the bracket tab and sliding the device out.
Note: Four ceiling mount brackets are included; both standard and recessed ceiling mount
brackets come in sizes: 1.43cm (9/16in) and 2.38cm (15/16in).
To protect your device from unauthorized removal, use the Kensington™ Security Slot to attach a
cable lock (not included).
Antennas
The FortiAP S423E unit provides dual concurrent radio signals. Use the 2.4GHz antennas to access
802.11b/g/n signals, and the 5GHz antennas to access 802.11/a/n/ac signals. To use both radio
frequencies concurrently, use all eight WiFi antennas.
Installing the WiFi Antennas
1. Insert the antenna base firmly into the appropriate antenna mount.
2. Securely hand tighten the fastening collar
3. Repeat for the remaining antennas
5 GHz
5GHz
2.4 GHz
2.4GHz
5 GHz
5GHz
2.4 GHz
2.4GHz
2.4 GHz
2.4GHz
5 GHz
5GHz
5 GHz
5GHz
2.4 GHz
2.4GHz
Loading...