Fortinet FortiAP S322C Information

FortiAP S322C

Information

FortiAP-S322C -Supplement.indd 1 2015-04-15 2:28:18 PM

Box Includes

Information Supplement

FortiAP S322C

Wall Mount Bracket

Box Includes

Pole Mount Strap

PoE Injector

Power Adapter

Pole Mount Kit

Pole Mount Bracket

Wall Mount Kit

5GHz Antennae (3)

2.4GHz Antennae (3)

FortiAP-S322C -Supplement.indd 2-3 2015-04-15 2:28:19 PM

Installation

IMPORTANT NOTE:

The device must be professionally installed.

The unit is designed for outdoor use and may be attached to either a

pole or wall. A waterproof

connector is supplied to ensure a watertight seal for connecting the Ethernet cable to the device.

Note: The device can be mounted either outdoors or indoors. The included PoE injector and surge

protector must be mounted indoors, as they are not weatherproof.

To mount the device on a wall

1. Using the wall-mount base as a template, mark the location of the mounting bolt holes on a flat
wall surface.

2.

Drill the mounting holes in the marked locations.

3. Fasten the wall-mount base securely to the back of the unit using the provided mounting

screws.

FortiAP-S322C -Supplement.indd 4-5 2015-04-15 2:28:19 PM

To mount the FortiAP unit on a pole

1. Fasten the wall-mount base securely to the back of the unit using the provided mounting screws.

2. Attach the

pole-mount bracket to the wall-mount base using with the provided screws.

The pole-mount bracket can be attached either vertically or horizontally, as required.

3. Loop the provided pole strap through the slots on the pole-mount bracket and then around

the pole.

4. Tighten the

strap with an appropriate screw driver and ensure that the device is firmly in place.

FAP-S322C

FortiAP-S322C -Supplement.indd 6-7 2015-04-15 2:28:19 PM