Fortinet FortiAP S221E, FortiAP S223E Quick Start Manual
FortiAP S221E, S223E
QuickStart Guide
4/12/2018
Copyright© 2018 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®,
FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet,
Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be
registered and/or common law trademarks of Fortinet. All other product or company names
may be trademarks of their respective owners. Performance and other metrics contained
herein were attained in internal lab tests under ideal conditions, and actual performance and
other results may vary. Network variables, different network environments and other
conditions may affect performance results. Nothing herein represents any binding
commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied,
except to the extent Fortinet enters a binding written contract, signed by Fortinet’s General
Counsel, with a purchaser that expressly warrants that the identified product will perform
according to certain expressly-identified performance metrics and, in such event, only the
specific performance metrics expressly identified in such binding written contract shall be
binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in
the same ideal conditions as in Fortinet’s internal lab tests. In no event does Fortinet make
any commitment related to future deliverables, features, or development, and circumstances
may change such that any forward-looking statements herein are not accurate. Fortinet
disclaims in full any covenants, representations,and guarantees pursuant hereto, whether
express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise
revise this publication without notice, and the most current version of the publication shall be
applicable.
Box Includes
or
FortiAP device QuickStart
Guide
5 GHz
2.4 GHz
X2 2.4GHz
X2 5GHz
(Model S223E)
Wall Mounting Hardware (including Standard and
Recessed Brackets)
Antennae
3
Before YouBegin
Write down details typically provided by your network administrator or ISP.
Static IPaddress
IPaddress ___________________
Subnet Mask ___________________
Default Gateway ___________________
Primary/Secondary DNS ___________________
DHCP
It is normal to not require a hostname, but your ISP might require it.
Hostname ___________________
QuickStart Guide Video
https://video.fortinet.com/video/177/
fortigate-and-fortiap
4
FortiAP S221E - Device Front
O: System is o
Green: System is on
Blinking: System is booting
up or upgrading
Orange: Reserved for
customized conguration
LED5: Power/Status
O: WiFi link is o
Blue: 2.4GHz link is on
Blinking: Data transmitting
/receiving at 2.4GHz link
Orange: 5GHz link is on
Blinking: Data transmitting/
receiving at 5GHz link
Green: 2.4 GHz and 5GHz
link is on
LED2: WIFI
O: Bluetooth non-activity
Green: Bluetooth activity
Blinking: Data transmitting/
receiving
LED1: BT/BLE
O: Link is o
Green: Link is on
Blinking: Data is transmitting/
receiving at 1000Mbps
Blinking: Data is transmitting/
receiving at 100Mbps
LED3: LAN 2
LED4: LAN1
O: Link is o
Green: Link is on
Blinking: Data is transmitting/
receiving at 1000Mbps
Blinking: Data is transmitting/
receiving at 100Mbps
5
FortiAP S223E - Device Front
O: System is o
Green: System is on
Blinking: System is booting
up or upgrading
Orange: Reserved for
customized conguration
LED5: Power/Status
O: WiFi link is o
Blue: 2.4GHz link is on
Blinking: Data transmitting
/receiving at 2.4GHz link
Orange: 5GHz link is on
Blinking: Data transmitting/
receiving at 5GHz link
Green: 2.4 GHz and 5GHz
link is on
LED2: WIFI
O: Bluetooth non-activity
Green: Bluetooth activity
Blinking: Data transmitting/
receiving
LED1: BT/BLE
O: Link is o
Green: Link is on
Blinking: Data is transmitting/
receiving at 1000Mbps
Blinking: Data is transmitting/
receiving at 100Mbps
LED3: LAN 2
LED4: LAN1
O: Link is o
Green: Link is on
Blinking: Data is transmitting/
receiving at 1000Mbps
Blinking: Data is transmitting/
receiving at 100Mbps
6
FortiAP S221E - Device Rear
LAN/PoE
Power connection
for optional power
adapter.
12V DC,
center positive.
FortiAP S223E - Device Rear
LAN/PoE
Power connection
for optional power
adapter.
12V DC,
center positive.
5.0 GHz
Antenna
5.0 GHz
Antenna
2.4 GHz
Antenna
2.4 GHz
Antenna
7
Installation
Ceiling bracket install
slide direction
Mounting an AP below
a suspended ceiling
Ceiling T-Rail
Ceiling Bracket
The unit (S221E or S223E) can be mounted on a wall or ceiling using
the mounting hardware provided.
The electrical wall box must be pre-installed.
8
Basic Connection
WAN/POE
Network Core/FortiGate
Connect the FortiAP device to a FortiGate controller or an Internet connection.
Ensure that the Power over Ethernet (PoE) cable is connected to an applicable
port on your FortiGate device or PoE injector.
Caution: Adequate grounding must be provided to the FortiAP unit and
the PoE injector, in compliance with your local electrical code or
regulations.
Warning: This device complies with IEEE 802.3af PoE specification. Do
not use any PoE injectors that are not IEEE 802.3af compliant as they
may damage your device.
9
FortiAPSetup
Deployment through a FortiGate
Ensure that you are running the Fortinet recommended version of
software. Please check support.fortinet.com for more information.
If FortiGate is on the same network as the FortiAP:
1.
Use FortiGate to preauthorize the FortiAP device.
2.
Refer to the “Access Point Deployment” section of the FortiWiFiand
FortiAP Configuration Guide found at http://forti.net/ap-docs.
3.
Plug the FortiAP into your local Ethernet connection. The FortiAP will selfconfigure.
Or
1.
Instead of preauthorizing, you can use the FortiGate to authorize the
FortiAP device after you have connected the FortiAP to the network.
2.
Within two minutes of connecting the FortiAP to the FortiGate, the device
appears on the Managed FortiAP page in the Web-based Manager:
authorize and assign a profile to the device.
10
Loading...