How it Works
Ford
Loading...
M-6007-A50SC
User Manual
11 pgs1.06 Mb0

Ford M-6007-A50SC User Manual

Download
Page 1
M-6007-A50SC
5.0L Engine Assembly
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD RACING PERFORMANCE PARTS
M-6007-A50SC Engine
Specifications and Owner's Manual
Fordracingparts.com
Techline 1-800-367-3788 Page 1 of 11 IS-1850-0378
Page 2
M-6007-A50SC
5.0L Engine Assembly
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
Please visit www.fordracingparts.com for the most current instruction information.
! ! ! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION.
AT ANY TIME YOU DO NOT UNDERSTAND THE INSTRUCTIONS, PLEASE CALL THE FORD RACING
FORD RACING PERFORMANCE PARTS
TECHLINE AT 1-800-367-3788 ! ! !
Note: Engine is shipped dry with no engine oil; do not start without adding engine oil. Pilot bearing is provided but not installed to allow for an automatic transmission.
1) Technical Specifications M-6007-A50SC Crate Engine:
Engine Assembly Part Number M-6007-A50SC Engine Type 5.0L 4V TiVCT – 2011 Mustang Engine Weight 195.5 kg. (431 lbs) Displacement 4.957L, (302 ci) Cylinder Block M-6010-A50L4V Bore 92.2 mm (3.629 in) Stroke 92.7 mm (3.649 in) Firing Order 1-5-4-8-6-3-7-2 Compression Ratio 9.5:1 Maximum rated rpm 6800 rpm Spark Plug (0.032 Gap) M-12405-M50 Crankshaft Forged Steel, Internal Balance Vibration Damper BR3E-6316-JA, Neutral Balance Connecting Rod (14042R-8) Manley Forged Steel w/ ARP2000 Bolts Piston (part # 0930008101) Mahle Forged, 8cc Dish Camshafts Hydraulic Roller Cam Timing Variable Camshaft Duration Int./Ex. Intake: 260°, Exhaust 263° Total Duration Camshaft Lift Int./Ex. Intake: 12mm, Exhaust 11mm Rocker Arm 2:1 Ratio Cylinder Head Aluminum Chamber Volume 54.5-57.5 cc Valve Head Diameter Int./Ex. 37mm (1.45 in) / 31mm (1.22 in) Oil Filter M-6731-FL820 Oil Pressure 80 psi @ 70° F/ 650 rpm Max Oil Temperature 280° F Engine Oil (8.0 qts.) Motorcraft SAE 5W-50 Full Synthetic
XO-5W50-QGT or equivalent
Engine Coolant Motorcraft Specialty Orange Engine Coolant
VC-3-B (US); CVC-3-B (Canada)
Max Coolant Temperature 230° F
Techline 1-800-367-3788 Page 2 of 11 IS-1850-0378
Page 3
M-6007-A50SC
5.0L Engine Assembly
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
2) Recommended Ford Racing Parts Not Included:
Tuner Supercharger Kit (front cover already machined) M-6066-MGT23TD
5.0L 4V Control Pack (NA calibration, cal. required) M-6017-A504V Colder Spark Plugs (already installed) M-12405-M50 Power Steering Pump Bracket M-8511-M50BR Alternator Kit M-8600-M50ALT Remote Oil Filter Adapter M-6881-M50 Blue Coil Covers M-6P067-M50B
3) Specifications:
Main Bearing Clearance 0.025 - 0.050 mm Crankshaft End Play 0.110 - 0.280 mm Connecting Rod Bearing Clearance 0.027 - 0.069 mm Connecting Rod Side Clearance 0.150 - 0.500 mm Piston Pin to Connecting Rod Clearance 0.003 - 0.023 mm Piston Pin to Piston Clearance 0.018 - 0.023 mm Piston to Bore Clearance 0.020 - 0.040 mm Piston Ring Gap – Top 0.15 - 0.25 mm Piston Ring Gap – 2nd 0.30 - 0.55 mm Piston Ring Gap – Oil Control Segment 0.15 – 0.45 mm Valve Spring Installed Height 40 mm Intake and Exhaust Valve Stem to Guide Clearance - Intake 0.020 – 0.069 mm Valve Stem to Guide Clearance - Exhaust 0.045 – 0.094 mm Collapsed Lash Adjuster Gap 0.35 – 0.85 mm
FORD RACING PERFORMANCE PARTS
Techline 1-800-367-3788 Page 3 of 11 IS-1850-0378
Page 4
M-6007-A50SC
5.0L Engine Assembly
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
4) Accessory Drive Belt Layout:
FORD RACING PERFORMANCE PARTS
Techline 1-800-367-3788 Page 4 of 11 IS-1850-0378
Page 5
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
5) Coolant Flow Diagram:
If a heater circuit is not used then the heater supply must be connected to the heater return to allow air to be purged from the right hand cylinder head and provide sufficient coolant flow through the right hand cylinder head. Install a 5/16" (0.3125) diameter restrictor in this hose.
M-6007-A50SC
5.0L Engine Assembly
FORD RACING PERFORMANCE PARTS
Techline 1-800-367-3788 Page 5 of 11 IS-1850-0378
Page 6
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
6) Oil Flow Diagram:
M-6007-A50SC
5.0L Engine Assembly
FORD RACING PERFORMANCE PARTS
WARNING: Before installation, prime the engine by removing the oil pressure switch from the filter adapter. Install appropriate fitting and using a pre-lube tank to prime oiling system. Verify that the oil reaches the valve train, valve cover removal may be necessary. Oil at the valve train confirms the engine is primed. Check oil level and fill as necessary.
Techline 1-800-367-3788 Page 6 of 11 IS-1850-0378
Page 7
M-6007-A50SC
5.0L Engine Assembly
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
7) Torque Specifications:
Application Torque Nm lb-ft lb-in Lubricant Accessory drive belt tensioner bolt 48 35 Accessory drive idler pulley 25 18 A/C compressor bolts 15 133 Camshaft bearing cap bolts 6 + 45 deg. 53 + 45 deg. Camshaft position sensor bolt 10 89 Catalytic converter to exh. man. nuts 40 30 Connecting rod cap (.0058 - .0062 stretch) 82 60 Engine oil Coolant outlet bolts 10 89 Coolant outlet pipe bolt 10 89 Coolant pump bolts 20 + 60 deg. 177 + 60 deg. Coolant pump pulley bolts 20 177 Crankshaft main bearing bolts See illustration Engine oil Crankshaft position sensor bolts 10 89 Crankshaft Damper bolt See illustration Crankshaft rear seal retainer bolts 10 + 45 deg. 89 + 45 deg. Cylinder Head bolts See illustration Engine oil Cylinder Head pipe plugs 14 + 180 deg. 124 + 180 deg. Cylinder head temperature sensor 11 97 Front cover bolts 25 + 60 deg. 18 + 60 deg. Oil filter ¾ to 1 turn after contact Engine oil pressure sensor 14 + 90 deg. 124 + 90 deg. Engine mount bracket bolts 55 41 Engine to transmission bolts 48 35 Exhaust manifold nuts 25 then 35 18 then 26 Exhaust manifold studs 25 18 Flywheel 20 + 60 deg. 177 + 60 deg. Fuel rail bolts 10 + 90 deg. 89 + 90 deg. Alternator B+ wire terminal nut 17 150 Alternator bolt and nut 48 35 Ignition coil on plug bolts 6 53 Intake manifold bolts 11.5 + 30 deg. 100 + 30 deg. Knock sensors 20 177
FORD RACING PERFORMANCE PARTS
Techline 1-800-367-3788 Page 7 of 11 IS-1850-0378
Page 8
M-6007-A50SC
5.0L Engine Assembly
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
7) Torque Specifications (continued):
Application Torque Nm lb-ft lb-in Lubricant Oil filter adapter bolts 20 + 60 deg. 177 + 60 deg. Oil pan bolts 10 + 45 deg. 89 + 45 deg. Oil pan drain plug 26 19 Oil pump bolts 20 + 60 deg. 177 + 60 deg. Oil pump pick up tube to pump 10 + 45 deg. 89 + 45 deg. Oil pressure sensor 14 + 180 10 + 180 Pick up tube strap to main cap 25 19 Pick up tube spacer to main cap 25 19 Piston cooling jets 10 + 45 deg. 89 + 45 deg. Primary timing chain tensioner bolts 10 89 Spark plugs 15 133 Thermostat housing bolts 10 89 Timing chain guide 10 89 Throttle Body 10 + 60 deg. 89 + 60 deg. Cam cover bolts 10 89 VCT phaser assembly bolts 15 + 90 deg. 133 + 90 deg. VCT Solenoid bolts 8 + 30 deg. 70 + 30 deg.
FORD RACING PERFORMANCE PARTS
Techline 1-800-367-3788 Page 8 of 11 IS-1850-0378
Page 9
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
8) Main Bearing Cap Torque:
M-6007-A50SC
5.0L Engine Assembly
FORD RACING PERFORMANCE PARTS
Techline 1-800-367-3788 Page 9 of 11 IS-1850-0378
Page 10
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
9) Cylinder Head Torque:
M-6007-A50SC
5.0L Engine Assembly
FORD RACING PERFORMANCE PARTS
Techline 1-800-367-3788 Page 10 of 11 IS-1850-0378
Page 11
M-6007-A50SC
5.0L Engine Assembly
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
10) Crankshaft Damper Torque:
FORD RACING PERFORMANCE PARTS
Techline 1-800-367-3788 Page 11 of 11 IS-1850-0378
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use