Ford FE1-60-B Instruction Manual

Page 1
EN
·
PT
INSTRUCTION MANUAL
MANUAL DE INSTRUÇÕES
FE1-60-B
SCREWDRIVER
2
YEAR
WARRANT Y
FE1-60-B
Operation manual and security
instructions inside the box.
Use safety glasses.
Keep this tool away from children.
Ford Motor Company trademarks
and trade dress used under license
to Nine HKG, Ltd.
fordmotorcompany.com
Made in P.R.C. / EU-Importer:
Herculano Santos, Lda
Apartado 325, Rua Vale do Salgueiro, 1115
Raso do Salgueiro, Z.I. EN1 Norte
3754-909 Águeda, Portugal
tl. +351 234 622 848 - fx. +351 234 625 032
geral@hs-ferragens.com
EN ENGLISH ORIGINAL INSTRUCTION MANUAL
PT PORTUGUÊS TRADUÇÃO DO MANUAL DE INSTRUÇÕES ORIGINAL
Page 2
FE1-60-B EN
Copyright © 2015 Page | 1 www.Ford-tools.com
1 APPLICATION .......................................................... 2
2 DESCRIPTION (FIG 1) ............................................. 2
3 PACKAGE CONTENT LIST ......................................... 2
4 SYMBOLS ................................................................. 3
5 GENERAL POWER TOOL SAFETY WARNINGS ............ 3
5.1 Working area ..................................................................................................... 3
5.2 Electrical safety ................................................................................................. 4
5.3 Personal safety .................................................................................................. 4
5.4 Power tool use and care ................................................................................ 5
5.5 Service .................................................................................................................. 5
6 SPECIAL SAFETY INSTRUCTIONS FOR CORDLESS
SCREWDRIVER ........................................................ 5
7 SPECIFIC SAFETY INSTRUCTIONS FOR RE-
CHARGEABLE BATTERIES ........................................ 5
8 CHARGING THE BATTERY (FIG. 2) ........................... 6
9 OPERATING INSTRUCTIONS .................................... 7
9.1 LED light .............................................................................................................. 7
9.2 Driving and removing screws (right/left) ............................................... 7
9.3 Working with the cordless screwdriver (Fig. 4) .................................... 7
10 TECHNICAL DATA .................................................... 8
11 NOISE ...................................................................... 8
12 CLEANING AND MAINTENANCE ............................... 8
13 WARRANTY .............................................................. 8
14 ENVIRONMENT ........................................................ 9
15 DECLARATION OF CONFORMITY ............................ 10
Page 3
FE1-60-B EN
Copyright © 2015 Page | 2 www.Ford-tools.com
CORDLESS SCREWDRIVER 3.6V FE1-60-B
1 APPLICATION
The power tool is intended for driving and drilling through wood and plastics It is not designed for commercial use.
WARNING! Please read and understand this operating manual before use and keep it for your future reference. Your power tool should only be passed on together with these instructions.
2 DESCRIPTION (FIG 1)
1. Collet chuck
2. Charging socket
3. Charger plug
4. ON/OFF switch
5. LED light
6. Adapter
3 PACKAGE CONTENT LIST
Remove all packing materials Remove remaining packaging and transit supports (if existing) Check the completeness of the packing content Check the appliance, the power cord, the power plug and all accessories for
transportation damages.
Keep the packaging materials as far as possible till the end of the warranty
period. Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with plastic bags! Danger of suffocation!
Packed in BMC, containing : 1x cordless screwdriver 1x charger 1x bit set 32pcs 1x instruction manual
When parts are missing or damaged, please contact your dealer.
Page 4
FE1-60-B EN
Copyright © 2015 Page | 3 www.Ford-tools.com
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
In accordance with essential requirements of the European directive(s)
Class II - The machine is double insulated; Earthing wire is therefore not necessary.
Read manual before use
Wear a mask In dusty conditions
Wear eye protection
Wear noise protection
5 GENERAL POWER TOOL SAFETY WARNINGS
Attention ! Read all safety warnings and instructions. Failure to heed
warnings and follow instructions may result in electric shock, fire and/or serious injury.
Keep safety warnings and instructions for future reference.
The term "power tool" in the safety warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
5.1 Working area
Keep working area clean and well lit. Untidy and dark areas can lead to
accidents.
Do not operate power tools in potentially explosive surroundings, for
example, in the presence of inflammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or fumes.
Keep children and bystanders at a distance when operating a power
tool. Distractions can cause you to lose control of it.
Page 5
FE1-60-B EN
Copyright © 2015 Page | 4 www.Ford-tools.com
5.2 Electrical safety
Always check that the power supply corresponds to the voltage on the rating plate.
Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use adapter plugs with earthed power tools. Unmodified
plugs and matching outlets will reduce the risk of a lethal electric shock.
Avoid body contact with earthed surfaces such as pipes, radiators,
kitchen ranges and refrigerators. There is an increased risk of a lethal
electric shock if your body is earthed.
Do not expose power tools to rain or wet conditions. If water gets inside
a power tool, it will increase the risk of a lethal electric shock.
Do not damage the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of a
lethal electric shock.
When operating a power tool outdoors, use an extension cable
suitable for outdoor use. Using a cord suitable for outdoor use reduces the
risk of a lethal electric shock.
If operating a power tool in a damp location is unavoidable, use a
power supply protected by a residual current device (RCD). Using an
RCD reduces the risk of a lethal electric shock.
5.3 Personal safety
Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of
inattention when operating a power tool may result in serious personal injury.
Use safety equipment. Always wear eye protection. Using safety
equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed will reduce the risk of personal injury.
Avoid accidental starts. Ensure the switch is in the off position before
inserting the plug. Carrying power tools with your finger on the switch or
plugging in power tools when the switch is in the on position makes accidents more likely.
Remove any adjusting keys or spanners before turning on the power
tool. A spanner or key left attached to a rotating part of the power tool may
result in personal injury.
Do not reach out too far. Keep your feet firmly on the ground at all
times. This will enable you retain control over the power tool in unexpected
situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from the power tool. Loose clothes,
jewellery or long hair can become entangled in the moving parts.
If there are devices for connecting dust extraction and collection
facilities, please ensure that they are attached and used correctly.
Using such devices can reduce dust-related hazards.
Page 6
FE1-60-B EN
Copyright © 2015 Page | 5 www.Ford-tools.com
5.4 Power tool use and care
Do not expect the power tool to do more than it can. Use the correct
power tool for what you want to do. A power tool will achieve better
results and be safer if used in the context for which it was designed.
Do not use the power tool if the switch cannot turn it on and off. A
power tool with a broken switch is dangerous and must be repaired.
Disconnect the plug from the power source before making
adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do
not allow people who are not familiar with the power tool or these instructions to operate it. Power tools are potentially dangerous in the
hands of untrained users.
Maintenance. Check for misalignment or jammed moving parts,
breakages or any other feature that might affect the operation of the power tool. If it is damaged, the power tool must be repaired. Many
accidents are caused by using poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance
with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work which needs to be done. Using a power tool in ways for which it was
not intended can lead to potentially hazardous situations.
5.5 Service
Your power tool should be serviced by a qualified specialist using only
standard spare parts. This will ensure that it meets the required safety
standards.
6 SPECIAL SAFETY INSTRUCTIONS FOR CORDLESS
SCREWDRIVER
Keep screwdriver bits and drill bits sharp and in good condition. This will
reduce the load on the machine ensuring a longer life of the machine.
Use only screwdriver bits and drill bits, recommended by the manufacturer. Do not attempt to modify the machine or its accessories in any way. Do not force the machine, let the machine do the work this will reduce the
wear on the machine and cutter and increase its efficiency and operating life.
7 SPECIFIC SAFETY INSTRUCTIONS FOR RE-CHARGEABLE
BATTERIES
Batteries may leak or explode if not handled correctly .Always observe the
following precautions when handling batteries.
Do not use this battery in this product for any other purpose. Do not attempt to dismantle the product. Do not immerse in or expose the product to water. Batteries are prone to leakage when discharged .to avoid damage to the
product, Re-charge the when no charge remains.
Store the product in a cool place when not in use
Page 7
FE1-60-B EN
Copyright © 2015 Page | 6 www.Ford-tools.com
After prolonged use the battery in this product may become hot, Switch the
machine off and allow the battery to cool down.
Do not use the product if notice any discoloration or distortion of the casing. Do not dispose of the product by incineration or in the domestic waste system,
take the product to an approved recycling or disposal facility.
CAUTION: The safety instructions should be read carefully before operating the tool.
8 CHARGING THE BATTERY (FIG. 2)
The battery supplied with this power tool contains a test charge only and must be fully charged before the first use. First read the safety instructions then follow the charging instructions. Important ! check that the voltage on the model plate of the adapter (6) corresponds to the voltage of the mains power supply.
Connect the adaptor to a
suitable mains socket.
Plug the charger plug (3) into
the charging socket (2) at the base of the handle of the
cordless screwdriver. The charge time is approx 5-7 hours. When the battery is loaded, the red light keeps illumining until the charger is disconnected from the mains power.
Fig 2
NOTE: During charging the battery will become warm , this is normal.
The battery will reach its full capacity after 3 – 5 full working cycles ( fully charged – fully discharged).
Remarks :
Do not allow the charger cable to become knotted or kinked. This adapter and product are specifically designed to work together. Do not
attempt to charge any other brand of cordless tool or battery pack with this charger.
Unplug the adapter when not in use and store it in a suitable storage cabinet. Avoid charging your battery in freezing conditions as charging power will not
be sufficient.
Page 8
FE1-60-B EN
Copyright © 2015 Page | 7 www.Ford-tools.com
9 OPERATING INSTRUCTIONS
9.1 LED light
Fig 3
The LED work light (5) can light prior to motor running if you press the switch lightly, which keep the work area to be lighted for checking clearly at first, and it lights also during your operation.
WARNING: Do not stare directly at the light beam. Never aim the beam at any person or an object other than the work piece. Do not deliberately aim the beam at personnel and ensure that it is not directed towards the eye of a person for longer than 0.25s.
9.2 Driving and removing screws (right/left)
Your tool is equipped with a three-way switch (4) that allows changing the chuck’s rotation direction. The switch has 3 positions: Driving (right) – Stop – Removing (left):
1. Clockwise rotation, press the top,
2. Counter clockwise rotation, press the bottom,
3. To stop the rotation, release the switch. NOTE: The spindle is locked when the screwdriver is switch off, this means that you can use the screwdriver to insert and remove screws even if the battery is discharged.
9.3 Working with the cordless screwdriver (Fig. 4)
Fig. 4
Place the required screwdriver bit straight into the collet chuck (1) on the drive shaft or use a magnetic bit holder as an extension.
Magnetic bit holder
bit
Page 9
FE1-60-B EN
Copyright © 2015 Page | 8 www.Ford-tools.com
10 TECHNICAL DATA
Item number
FE1-60-B
No-load speed:
180min-1
Battery:
Type
Lithium
Voltage
3.6V DC
Capacity
1300mAh
Charger:
Input
230V~ 50Hz, 5W
Output
6V DC - 300mA
Battery Charging time:
5-7 hours
11 NOISE
Noise values measured according to relevant standard. (K = 3)
Acoustic pressure level LpA
61 dB(A)
Acoustic power level LwA
72 dB(A)
ATTENTION! The sound power level may exceed 85 dB(A), in this case individual hearing protection shall be worn.
aw (Vibration)
0.92 m/s²
K = 1.5 m/s²
12 CLEANING AND MAINTENANCE
Keep the ventilation slots of the machine clean to prevent overheating of the
engine.
Regularly clean the machine housing with a soft cloth, preferably after each
use.
If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
13 WARRANTY
This product is warranted as provided by law for a 24 -month period effective
from the date of purchase by the first user.
This warranty covers all material or production flaws excluding: batteries,
chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under
the warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate
use of the tool.
Repairs may only be carried out by an authorised customer service centre for
FORD tools.
Page 10
FE1-60-B EN
Copyright © 2015 Page | 9 www.Ford-tools.com
You can always obtain more information at the number Customer phone
number +351 234 604 097
Any transportation costs shall always be borne by the customer, unless agreed
otherwise in writing.
At the same time, no claim can be made on the warranty if the damage of the
device is the result of negligent maintenance or overload.
Definitely excluded from the warranty is damage resulting from fluid
permeation, excessive dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not following the instructions given in the manual), inexpert assembly, lightning strike, erroneous net voltage. This list is not exhaustive.
Acceptance of claims under warranty can never lead to the prolongation of the
warranty period nor commencement of a new warranty period in case of a device replacement.
Devices or parts which are replaced under the warranty therefore remain the
property of Herculano Santos, Lda.
We reserve the right to reject a claim whenever the purchase cannot be
verified or when it is clear that the product has not been properly maintained. (Clean ventilation slots, carbon brushes serviced regularly, etc.).
Your purchase receipt must be kept as proof of date of purchase. Your appliance must be returned undismantled to your dealer in an acceptably
clean state, (in its original blow-moulded case if applicable to the unit), accompanied by proof of purchase.
14 ENVIRONMENT
Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way. Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle facilities exist. Check with your Local Authority or retailer for recycling advice.
Page 11
FE1-60-B EN
Copyright © 2015 Page | 10 www.Ford-tools.com
15 DECLARATION OF CONFORMITY
Herculano Santos, Lda, declares that,
Product : Cordless screwdriver 3.6V
Trade mark : Ford
Model : FE1-60-B
Is in conformity with the essential requirements and other relevant provisions of
the applicable European Directives, based on the application of European
harmonized standards. Any unauthorized modification of the apparatus voids this
declaration.
European Directives (including, if applicable, their amendments):
2004/108/EC
2006/42/EC
European harmonized standards (including, if applicable, their amendments):
EN 55014-1:2006+A1+A2;
EN 55014-21997+A1+A2;
EN 60745-2-2:2010;
EN 60745-1:2009+A11:10
Keeper of the technical documentation :
Herculano Santos, Lda
The undersigned acts on behalf of the company management,
Agnelo Amaro
Engineering Department Director
1/07/2013
Loading...