The information contained in this publication was correct at the time of release. In the interest of continuous
development, we reserve the right to change specifications, design or equipment at any time without
notice or obligation. No part of this publication may be reproduced, transmitted, stored in a retrieval
system or translated into any language in any form by any means without our written permission. Errors
and omissions excepted.
WARNING: Operating, servicing and maintaining a passenger vehicle or off-highway motor vehicle
can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which
are known to the State of California to cause cancer and birth defects or other reproductive harm. To
minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your
vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your
vehicle. For more information go to www
.P65Warnings.ca.gov/passenger-vehicle.
WARNING: Battery posts, terminals and
related accessories contain lead and lead
compounds, chemicals known to the State of
California to cause cancer and reproductive harm.
Wash your hands after handling.
Page 4
Page 5
Table of Contents
Contacting Us
Contacting Us ..................................................15
Introduction
About This Publication .................................17
Using This Publication .................................18
Warranty Information ...............................526
Decommissioning the Vehicle
- Police
Decommissioning Requirements .........529
Appendices
Electromagnetic Compatibility .............530
14
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 19
Contacting Us
If you require assistance or clarification on
policies or procedures, please contact the
customer relationship center.
United States
Ford Motor Company
Customer Relationship Center
PO Box 6248
Dearborn, MI 48126
1-800-392-3673 (FORD)
TDD for the hearing impaired:
7-1-1 (where offered by your telephone
service provider)
www.ford.com/help/contact/
Ford Credit - US Only
Ford Credit offers a full range of financing
and lease plans to help you acquire your
vehicle. If you have financed or leased your
vehicle through Ford Credit, thank you for
your business.
For assistance call 1-800-727-7000, or for
more information about Ford Credit and
access to an account manager, visit
www.ford.com/finance.
Canada
Customer Relationship Centre
Ford Motor Company of Canada Limited
P.O. Box 2000
Oakville, Ontario L6J 5E4
1-800-565-3673 (FORD)
TDD for the hearing impaired:
7-1-1 (where offered by your telephone
service provider)
www.ford.ca
Australia
Ford Motor Company of Australia Pty Ltd.
Customer Relationship Centre
Private Mail Bag 5
Campbellfield, Victoria, 3061
Telephone: (13 FORD) 13 3673
E-mail: [email protected]
New Zealand
Ford Motor Company
Attention: Customer Relationship Centre
Private Bag 76912
Manukau City 2241
Telephone: 0800 367 369 (FORDNZ)
E-mail: [email protected]
China - Imported Vehicle
Customer Relationship Center
Telephone: 400-690-1886
Website: https://www.ford.com.cn/
China - Chang’An Ford
Customer Relationship Center
Telephone: 800-810-8168
Mobile: 400-887-7766
Website: https://www.ford.com.cn/
Ford Motor Company
Ford Export Operations
Attention: Owner Relations
1555 Fairlane Drive
Fairlane Business Park #3
Allen Park, MI 48101
Fax: (313) 390-0804
Telephone: (313) 594-4857
E-mail: [email protected]
U.S. Virgin Islands and Puerto Rico
Ford Motor Company
Ford Export Operations
Attention: Owner Relations
1555 Fairlane Drive
Fairlane Business Park #3
Allen Park, MI 48101
Telephone: (800) 841-3673
E-mail: [email protected]
15
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Ford International Business Development,
Inc.
P.O. Box 11957
Caparra Heights Station
San Juan, PR 00922-1957
1-800-392-3673 (FORD)
Fax: (313) 390-0804
E-mail: [email protected]
www.ford.com.pr
Middle East
Ford Middle East Customer Relationship
Center
P.O. Box 21740
Dubai, United Arab Emirates
Telephone: 80004441066
Toll-free number for the Kingdom of Saudi
Arabia: 8008443673
Mobily and Zain cell phone users in Saudi
Arabia: 800850078
Kuwait: 22280384
Local telephone number for Kuwait: +965
1 898900
Fax: +971 4 3327266
E-mail: [email protected]
www.me.ford.com
South Korea
Customer Relationship Center
Telephone: +82-02-1600-6003
E-mail: [email protected]
Emergency Dispatch Service call:
080-300-3673
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 21
E154903
Introduction
ABOUT THIS PUBLICATION
WARNING: Driving while distracted
can result in loss of vehicle control, crash
and injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the
safe operation of your vehicle. We
recommend against the use of any
hand-held device while driving and
encourage the use of voice-operated
systems when possible. Make sure you
are aware of all applicable local laws
that may affect the use of electronic
devices while driving.
WARNING: You risk death, fire, or
serious injury to yourself and others if you
do not follow the instruction highlighted
by the warning symbol.
Thank you for choosing Ford. We
recommend that you take some time to
get to know your vehicle in order to benefit
from greater safety and pleasure from
driving it. Use this publication, whether
in-vehicle, print, in FordPass app or online,
to familiarize yourself with the features on
your vehicle.
Note: Use and operate your vehicle in line
with all applicable laws and regulations.
Note: Pass on all printed owner’s
information when selling this vehicle.
Features and Options
This publication describes product features
and options available throughout the range
of available models, sometimes even
before they are generally available. It could
describe options that are not available on
the vehicle you have purchased.
Providing Feedback
If you would like to provide feedback to the
Owner's Manual team, please email us at
[email protected].
You will not receive a direct email
response. Your submission will be
investigated and necessary changes will
be made to the Owner's Manual content.
To help investigate your submission,
please include the following information:
•Your vehicle model
•The country in which your vehicle was
purchased
•The Owner's Manual section needing
investigation
Illustrations
Note: Some of the illustrations in this
publication could show features as used in
different models, so could appear different
to you on your vehicle.
Location of Components
This manual may qualify the location of a
component as left-hand side or right-hand
side. The side is determined when facing
forward in the seat.
Right-hand side.A
Left-hand side.B
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
17
Page 22
Introduction
Accessing the Digital Owner's
Manual
Vehicles with a Portrait Center Display
Screen
The Owner's Manual application is located
in the Apps list.
Vehicles with a Landscape Center
Display Screen
Depending on your vehicle, the Owner's
Manual application is located in either the
Apps list or the Features list.
Accessing the Online and Printed
Owner's Manual
Online Owner's Manual
•Through your device's app store, you
can download the FordPass app.
•You can visit the local Ford Website.
Note: To find the local Ford website, visit
ht
tps://corporate.ford.com/operations/
locations/global-links.html.
Note: We strongly recommend
downloading a copy of the Owner's Manual
and having it with you whenever you drive,
and to view the information if you are unable
to be inside the vehicle.
Printed Owner's Manual
In U.S. and Canada, visit www.helminc.com
or see an authorized dealer.
In Europe, visit www.z-order.de or see an
authorized dealer.
For all other Countries, see your authorized
dealer.
USING THIS PUBLICATION
To quickly locate information about your
vehicle, use the word search within the
Owner's Manual application.
18
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 23
E162384
E231157
E67020
E139220
E67021
E139227
E139209
E67024
E270480
E139223
E139211
E141128
E332905
E139219
E139212
E103308
E67022
E139221
E139228
E231160
Symbols Glossary
SYMBOLS USED ON YOUR
VEHICLE
These are some of the symbols you may
see on your vehicle.
Airbag
Air conditioning system
Air conditioning system lubricant
type
Anti-lock braking system
Avoid smoking, flames or sparks
Battery
Battery acid
Blower motor
Brake fluid - non petroleum
based
Child safety door lock or unlock
Child seat lower anchor
Child seat tether anchor
Cruise control
Do not open when hot
Electric Parking brake
Engine air filter
Engine coolant
Engine coolant temperature
Engine oil
Explosive gas
Brake system
Brake system
Cabin air filter
Check fuel cap
19
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Fan warning
Fasten seatbelt
Flammable
Front fog lamps
Page 24
E139214
E75790
E67019
E270968
E270945
E139231
E139232
E139229
E67028
E72343
E139213
E71341
E139216
E139225
E231159
E65963
E72021
E231158
Symbols Glossary
Fuel pump reset
Fuse compartment
Hazard flashers
Headlamp high beams
Headlamps on
Heated rear window
Hill descent control
Horn control
Interior luggage compartment
release
Jack
Keep out of reach of children
Malfunction Indicator Lamp
(MIL)
Note operating instructions
Panic alarm
Parking aid
Parking lamps
Passenger airbag activated
Passenger airbag deactivated
Power steering fluid
Power windows front/rear
Power window lockout
Requires registered technician
Lighting control
Low fuel level
Low tire pressure warning
Maintain correct fluid level
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Safety alert
See Owner's Manual
See Service Manual
Side airbag
20
Page 25
E138639
E130458
E332910
E67018
E73953
E270967
E67019
E389529
E389523
E71341
E67024
E270480
E423119
E67020
E323448
E323449
E132353
E67028
Symbols Glossary
Shield the eyes
Stability control
Stability control off
Trail control
Turn Signal
Windshield defrosting system
Windshield wiping system
Windshield wash and wipe
SYMBOLS USED ON YOUR
INSTRUMENT CLUSTER
Depending on your vehicle options, market,
and instrument cluster type, not all
symbols shown are available.
Lighting and Signaling
High beams. See Headlamp
Indicators (page 107).
Auto high beams. See
Automatic High Beam Control
Indicators (page 112).
Front fog lamps. See Using the
Front Fog Lamps (page 110).
Off road auxiliary lighting active.
Turn signal - right. See Usingthe Turn Signal Lamps (page
108).
Turn signal - left. See Using theTurn Signal Lamps (page 108).
Positioning/side lights. See
Headlamp Indicators (page
107).
Exterior bulb failure. See
Exterior Bulb Specification
Chart (page 374).
Brakes
Brake failure. See Brakes –
Warning Lamps (page 219).
Brake failure. See Brakes –
Warning Lamps (page 219).
Electric parking brake fault. See
Electric Parking Brake –
Warning Lamps (page 222).
Anti-lock brake system
malfunction. See Brakes –Warning Lamps (page 219).
Automatic brake hold. See AutoHold Indicators (page 233).
Automatic brake hold off or
unavailable. See Auto Hold
Indicators (page 233).
Visibility
Windshield washer fluid level.
See Wipers and Washers –
Warning Lamps (page 105).
Engine
Check engine. See Starting and
Stopping the Engine –
Warning Lamps (page 180).
21
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 26
E67022
E103308
E121377
E146361
E422624
E415072
E225310
E295413
E295414
E295419
E295420
E389528
E271854
E402396
E402315
E334922
E389524
Symbols Glossary
Engine oil pressure. See
Starting and Stopping the
Engine – Warning Lamps
(page 180).
Engine coolant temperature.
See Coolant – Warning Lamps
(page 365).
Auto Start/Stop. See
Auto-Start-Stop Indicators
(page 188).
Auto Start/Stop off or
unavailable. See
Auto-Start-Stop Indicators
(page 188).
Fuel
Fuel. See Fuel and Refueling
– Warning Lamps (page 198).
Transmission
Non-emission powertrain fault.
See Starting and Stopping the
Engine – Warning Lamps
(page 180).
Vehicle Handling
Selectable drive mode - normal.
See Normal (page 282).
Selectable drive mode - ECO.
See Eco (page 282).
Selectable drive mode - sport.
See Sport (page 283).
Selectable drive mode tow/haul. See Tow/Haul (page
283).
Selectable drive mode - slippery.
See Slippery (page 283).
Selectable drive mode - trail.
See Trail (page 283).
Selectable drive mode snow/sand. See DeepSnow/Sand (page 282).
Selectable drive mode off-road. See Off-Road (page
282).
Selectable drive mode - pursuit.
See Pursuit (page 282).
Driver Assistance
Cruise control. See Cruise
Control Indicators (page 256).
Adaptive cruise control. See
Adaptive Cruise Control
Indicators (page 263).
Hill descent control. See Hill
Descent Control Indicator
(page 241).
Overspeed warning.
Lane keeping assist. See
Switching the Lane Keeping
System On and Off (page 287).
Lane centering assist. See Lane
Centering Indicators (page
266).
Safety
Seatbelt. See Seatbelt
Reminder Indicators (page
49).
Airbag. See Crash Sensors andAirbag Indicator (page 61).
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
22
Page 27
E411393
E411501
E139232
E335612
E414546
E406036
E246598
E397136
E224045
E271854
E405502
E389525
E67021
E389521
E224090
Symbols Glossary
Stability control system active
or not available. See StabilityControl Indicator (page 240).
Stability control system off. See
Stability Control Indicator
(page 240).
Tire failure/Low tire pressure.
See Tire Pressure Monitoring
System – Warning Lamps
(page 405).
Forward collision warning
system off or unavailable. See
Pre-Collision Assist –
Warning Lamps (page 311).
Blind spot information system
off or unavailable. See
Switching Blind Spot
Information System On and Off (page
295).
Door(s) ajar. See Doors andLocks – Warning Lamps (page
81).
Security
Hood release/ajar. See
Opening and Closing the
Hood (page 353).
Liftgate release/ajar. See
Liftgate – Warning Lamps
(page 91).
Keyless idle. See How DoesPolice Engine Idle Work (page
178).
Pursuit mode. See Pursuit
(page 282).
Liftgate unlock.
Electrical Systems
Battery charge level. See 12V
Battery – Warning Lamps
(page 371).
Hybrid/electric system failure.
See Hybrid Electric VehicleInformation (page 185).
Ready to drive. See Hybrid
Electric Vehicle Information
(page 185).
Boundary alert. See Using the
Police Perimeter Alert
System (page 94).
23
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 28
Data Privacy
WARNING: Do not connect
wireless plug-in devices to the data link
connector. Unauthorized third parties
could gain access to vehicle data and
impair the performance of safety related
systems. Only allow repair facilities that
follow our service and repair instructions
to connect their equipment to the data
link connector.
We respect your privacy and are
committed to protecting it. The
information contained in this publication
was correct at the time of release, but as
technology rapidly changes, we
recommend that you visit the local Ford
website for the latest information.
Your vehicle has electronic control units
that have data recording functionality and
the ability to permanently or temporarily
store data. This data could include
information on the condition and status of
your vehicle, vehicle maintenance
requirements, events and malfunctions.
The types of data that can be recorded are
described in this section. Some of the data
recorded is stored in event logs or error
logs.
Note: Error logs are reset following a service
or repair.
Note: We may provide information in
response to requests from law enforcement,
other government authorities and third
parties acting with lawful authority or
through a legal process. Such information
could be used by them in legal proceedings.
Data recorded includes, for example:
•Operating states of system
components, for example fuel level,
tire pressure and battery charge level.
•Vehicle and component status, for
example wheel speed, deceleration,
lateral acceleration and seatbelt
status.
•Events or errors in essential systems,
for example headlamps and brakes.
•System responses to driving situations,
for example airbag deployment and
stability control.
•Environmental conditions, for example
temperature.
Some of this data, when used in
combination with other information, for
example an accident report, damage to a
vehicle or eyewitness statements, could
be associated with a specific person.
Services That We Provide
If you use our services, we collect and use
data, for example account information,
vehicle location and driving characteristics,
that could identify you. We transmit this
data through a dedicated, protected
connection. We only collect and use data
to enable your use of our services to which
you have subscribed, with your consent or
where permitted by law. For additional
information, see the terms and conditions
of the services to which you have
subscribed.
For additional information about our
privacy policy, refer to the local Ford
website.
Services That Third Parties
Provide
We recommend that you review the terms
and conditions and data privacy
information for any services equipped with
your vehicle or to which you subscribe. We
take no responsibility for services that third
parties provide.
Where equipped, SiriusXM with 360L could
use the modem. To disable, turn off the
SiriusXM with 360L or Vehicle Connectivity
setting. See Enabling and Disabling theModem (page 446).
24
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 29
Data Privacy
Note: Consistent with your data and
connectivity settings, data may be accessed
by third parties.
SERVICE DATA
Service data recorders in your vehicle are
capable of collecting and storing
diagnostic information about your vehicle.
This potentially includes information about
the performance or status of various
systems and modules in the vehicle, such
as engine, throttle, steering or brake
systems. In order to properly diagnose and
service your vehicle, Ford Motor Company
(Ford of Canada in Canada), and service
and repair facilities may access or share
among them vehicle diagnostic
information received through a direct
connection to your vehicle when
diagnosing or servicing your vehicle.
Additionally, Ford Motor Company (Ford
of Canada, in Canada) may, where
permitted by law, use vehicle diagnostic
information for vehicle improvement or
with other information we may have about
you, for example, your contact information,
to offer you products or services that may
interest you. Data may be provided to our
service providers such as part suppliers
that may help diagnose malfunctions, and
who are similarly obligated to protect data.
We retain this data only as long as
necessary to perform these functions or to
comply with law. We may provide
information where required in response to
official requests to law enforcement or
other government authorities or third
parties acting with lawful authority or court
order, and such information may be used
in legal proceedings. For U.S. only (if
equipped), if you choose to use connected
apps and services, you consent that certain
diagnostic information may also be
accessed electronically by Ford Motor
Company and Ford authorized service
facilities, and that the diagnostic
information may be used to provide
services to you, personalizing your
experience, troubleshoot, and to improve
products and services and offer you
products and services that may interest
you, where permitted by law. For Canada
only, for more information, please review
the Ford of Canada privacy policy at
www.ford.ca, including our U.S. data
storage and use of service providers in
other jurisdictions who may be subject to
legal requirements in Canada, the United
States and other countries applicable to
them, for example, lawful requirements to
disclose personal information to
governmental authorities in those
countries.
EVENT DATA
This vehicle is equipped with an event data
recorder. The main purpose of an event
data recorder is to record, in certain crash
or near crash-like situations, such as an
airbag deployment or hitting a road
obstacle; this data will assist in
understanding how a vehicle’s systems
performed. The event data recorder is
designed to record data related to vehicle
dynamics and safety systems for a short
period of time, typically 30 seconds or less.
The event data recorder in this vehicle is
designed to record such data as:
•How various systems in your vehicle
were operating.
•Whether or not the driver and
passenger seatbelts were
buckled/fastened.
•How far (if at all) the driver was
depressing the accelerator and/or the
brake pedal.
•How fast the vehicle was traveling.
•Where the driver was positioning the
steering wheel.
25
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 30
Data Privacy
This data can help provide a better
understanding of the circumstances in
which crashes and injuries occur.
Note: Event data recorder data is recorded
by your vehicle only if a non-trivial crash
situation occurs; no data is recorded by the
event data recorder under normal driving
conditions and no personal data or
information (for example name, gender,
age, and crash location) is recorded.
However, parties, such as law enforcement,
could combine the event data recorder data
with the type of personally identifying data
routinely acquired during a crash
investigation.
To read data recorded by an event data
recorder, special equipment is required,
and access to the vehicle or the event data
recorder is needed. In addition to the
vehicle manufacturer, other parties, such
as law enforcement, that have such special
equipment, can read the information if they
have access to the vehicle or the event
data recorder.
BlueCruise Data (If Equipped)
If BlueCruise is active in certain crash or
near crash-like situations, such as an
airbag deployment or hitting a road
obstacle, the system may record driver
attentiveness, based on the direction of
eyes and duration, and photographs of the
driver seat area.
Note: No data is recorded under normal
driving conditions.
SETTINGS DATA
Your vehicle has electronic control units
that have the ability to store data based
on your personalized settings. The data is
stored locally in the vehicle or on devices
that you connect to it, for example, a USB
drive or mobile device. You can delete
some of this data and also choose whether
to share it through the services to which
you subscribe. See Settings (page 458).
Comfort and Convenience Data
Data recorded includes, for example:
•Seat and steering wheel position.
•Climate control settings.
•Radio presets.
Entertainment Data
Data recorded includes, for example:
•Music, videos or album art.
•Contacts and corresponding address
book entries.
•Navigation destinations.
CONNECTED VEHICLE DATA
The modem has a SIM. The modem was
enabled when your vehicle was built and
periodically sends messages to stay
connected to the cell phone network,
receive automatic software updates and
send vehicle-related information to us, for
example diagnostic information. These
messages could include information that
identifies your vehicle, the SIM and the
electronic serial number of the modem.
Cell phone network service providers could
have access to additional information, for
example cell phone network tower
identification. For additional information
about our privacy policy, visit
www
.FordConnected.com or refer to your
local Ford website.
26
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 31
Data Privacy
Note: The modem may continue to send
this information unless you disable the
modem or stop the modem from sharing
vehicle data by changing the connectivity
settings. See Connected Vehicle (page
446).
Note: The service can be unavailable or
interrupted for a number of reasons, for
example environmental or topographical
conditions and data plan coverage.
Note: To find out if your vehicle has
connectivity technology, visit
www
.FordConnected.com.
MOBILE DEVICE DATA
If you connect a mobile device to your
vehicle, you can display data from your
device on the touchscreen for example,
music and album art. You can grant apps
permission to access your connected
vehicle information with mobile apps on
your device through the system.
The mobile apps function operates by your
connected device sending data to us in the
United States. The data is encrypted and
includes, for example, the vehicle
identification number of your vehicle, the
operating system module serial number,
odometer, enabled apps, usage statistics
and debugging information. We retain it
only as long as necessary to provide the
service, to troubleshoot, for continuous
improvement and to offer you products
and services that may be of interest to you
according to your preferences and where
allowed by law.
If you connect a cell phone to the system,
the system creates a profile that links to
that cell phone. The cell phone profile
enables more mobile features and efficient
operation. The profile contains, for
example data from your phonebook, read
and unread text messages and call history,
including history of calls when your cell
phone was not connected to the system.
If you connect a media device, the system
creates and retains a media device index
of supported media content. The system
also records a short diagnostic log of
approximately 10 minutes of all recent
system activity.
The cell phone profile, media device index
and diagnostic log remain in your vehicle
unless you delete them and are generally
accessible only in your vehicle when you
connect your cell phone or media device.
If you no longer plan to use the system or
your vehicle, we recommend you use the
applicable reset function to erase the
stored information. See Performing aSystem Reset (page 473).
System data cannot be accessed without
special equipment and access to your
vehicle's module.
For additional information about our
privacy policy, refer to the local Ford
website.
Note: To find out if your vehicle has
connectivity technology, visit
www
.FordConnected.com.
EMERGENCY CALL SYSTEM
DATA
27
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
When the emergency call system is active,
it may disclose to emergency services that
your vehicle has been in a crash involving
the deployment of an airbag or activation
of the fuel pump shut-off. Certain versions
or updates to the emergency call system
may also be capable of electronically or
Page 32
Data Privacy
verbally disclosing to emergency services
operators your vehicle location or other
details about your vehicle or crash to assist
emergency services operators to provide
the most appropriate emergency services.
If you do not want to disclose this
information, do not activate the emergency
call system.
Note: You cannot deactivate emergency
call systems that are required by law.
28
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 33
Environment
PROTECTING THE
ENVIRONMENT
Sustainability is a priority at Ford. We are
constantly looking for ways to reduce our
impact on the planet while providing
customers with great products and
delivering a strong business. You should
play your part in protecting the
environment. Correct vehicle usage and
the authorized disposal of waste, cleaning
and lubrication materials are significant
steps toward this aim.
For additional information about our
sustainability progress and initiatives, visit
www
.sustainability.ford.com.
29
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 34
INTERIOR OVERVIEW
E400562
A
B
C
D
E
F
G
J
I
K
H
L
M
Visual Search
See Unlocking and Locking the Doors Using the Central Locking (page
A
79).
See Exterior Lighting Control (page 106). See Exterior Lighting Control
B
(page 106).
See Switching Cruise Control On and Off (page 255). See Switching
C
Adaptive Cruise Control On and Off (page 259).
See Instrument Cluster Overview (page 125).D
See Using the Instrument Cluster Display Controls (page 131).E
See Identifying the Climate Control Unit (page 137).F
See Opening the Glove Compartment (page 171).G
See Center Display Overview (page 457).H
See Switching the Hazard Flashers On and Off (page 336).I
See Ignition Switch (page 173). See Push Button Ignition Switch (page 174).J
30
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 35
See Opening the Center Console (page 171).K
E400563
A
J
I
H
G
E
F
D
C
B
See Sitting in the Correct Position (page 143).L
See Adjusting the Exterior Mirrors (page 121).M
EXTERIOR OVERVIEW
Visual Search
See Unlocking and Locking the Doors Using the Remote Control (page
A
79).
See Refueling Your Vehicle (page 194). See Refueling Your Vehicle (page
B
195).
See Changing a Flat Tire (page 407).C
See Locating the 360 Degree Cameras (page 252).D
See Locating the Rear Parking Aid Sensors (page 246).E
See Connecting a Trailer (page 323).F
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
31
Page 36
Visual Search
See Opening and Closing the Hood (page 353).G
See Locating the Pre-Collision Assist Sensors (page 309).H
See Folding the Exterior Mirrors (page 121).I
See Using the High Beam Headlamps (page 106). See Using the High Beam
J
Headlamps (page 107).
32
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 37
Child Safety
CHILD SAFETY PRECAUTIONS
WARNING: Always make sure your
child is secured properly in a device that
is appropriate for their height, age and
weight. Child safety restraints must be
bought separately from your vehicle.
Failure to follow these instructions and
guidelines may result in an increased risk
of serious injury or death to your child.
WARNING: All children are shaped
differently. The National Highway Traffic
Safety Administration and other safety
organizations, base their
recommendations for child restraints on
probable child height, age and weight
thresholds, or on the minimum
requirements of the law. We recommend
that you check with a NHTSA Certified
Child Passenger Safety Technician
(CPST) to make sure that you properly
install the child restraint in your vehicle
and that you consult your pediatrician to
make sure you have a child restraint
appropriate for your child. To locate a
child restraint fitting station and CPST,
contact NHTSA toll free at
1-888-327-4236 or go to
www.nhtsa.dot.gov. In Canada, contact
Transport Canada toll free at
1-800-333-0371 or go to www.tc.gc.ca
to find a Child Car Seat Clinic in your
area. Failure to properly restrain children
in child restraints made especially for
their height, age and weight, may result
in an increased risk of serious injury or
death to your child.
WARNING: On hot days, the
temperature inside the vehicle can rise
very quickly. Exposure of people or
animals to these high temperatures for
even a short time can cause death or
serious heat related injuries, including
brain damage. Small children are
particularly at risk.
WARNING: Do not place a
rearward facing child restraint in front of
an active airbag. Failure to follow this
instruction could result in personal injury
or death.
WARNING: Properly secure
children 12 years old and under in a rear
seating position whenever possible. If
you are unable to properly secure all
children in a rear seating position,
properly secure the largest child on the
front seat. If you must use a forward
facing child restraint on the front seat,
move the seat as far back as possible.
Failure to follow these instructions could
result in personal injury or death.
WARNING: Always carefully follow
the instructions and warnings provided
by the manufacturer of any child
restraint to determine if the restraint
device is appropriate for your child's size,
height, weight, or age. Follow the child
restraint manufacturer's instructions and
warnings provided for installation and
use in conjunction with the instructions
and warnings provided by your vehicle
manufacturer. A safety seat that is
improperly installed or utilized, is
inappropriate for your child's height, age,
or weight or does not properly fit the
child may increase the risk of serious
injury or death.
33
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 38
E319061
Child Safety
WARNING: Do not allow a
passenger to hold a child on their lap
when your vehicle is moving. Failure to
follow this instruction could result in
personal injury or death in the event of a
sudden stop or crash.
•Keep the buckle release button
pointing up and away from the child
restraint, with the tongue between the
child restraint and the release button,
to prevent accidental unbuckling.
•Put the seatbelt in the automatic
locking mode.
WARNING: Do not use pillows,
books or towels to boost your child's
height. Failure to follow this instruction
could result in personal injury or death.
WARNING: Properly secure child
restraints or booster seats when they are
not in use. They could become projectiles
in a sudden stop or crash. Failure to
follow this instruction could result in
personal injury or death.
WARNING: Do not put the shoulder
section of the seatbelt or allow the child
to put the shoulder section of the
seatbelt under their arm or behind their
back. Failure to follow this instruction
could reduce the effectiveness of the
seatbelt and increase the risk of injury or
death in a crash.
WARNING: Do not leave children
or pets unattended in your vehicle.
Failure to follow this instruction could
result in personal injury or death.
When installing a child restraint with
seatbelts:
•Place the vehicle seat in the upright
position before you install the child
restraint.
•Use the correct seatbelt buckle for that
seating position.
•Insert the belt tongue into the buckle.
Make sure the tongue is securely
fastened in the buckle.
CHILD RESTRAINT ANCHOR
POINTS
WHAT ARE THE CHILD RESTRAINT
ANCHOR POINTS
Anchor points allow you to quickly and
safely install a child restraint.
LOCATING THE CHILD RESTRAINT
LOWER ANCHOR POINTS
Second Row Bucket Seats and Third Row
Seats
Second Row Bench Seats and Third Row
Seats
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
34
Page 39
E397322
E423446
E423447
Child Safety
LOCATING THE CHILD RESTRAINT
TOP TETHER ANCHOR POINTS
Second-Row Bucket Seats and Third-Row
Seats
Second-Row Bench Seats and Third-Row
Seats
CHILD RESTRAINTS
CHILD RESTRAINT POSITION
INFORMATION
Install the child restraint tightly against the
vehicle seat. It may be necessary to lift or
remove the head restraint.
Rear Facing Child Restraints
Combined Weight of Child
and Child Restraint
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
LATCH (Lower Anchors
Only)
35
Seatbelt Only
XXUp to 65 lb (29 kg)
XOver 65 lb (29 kg)
Page 40
Forward Facing Child Restraints
Combined Weight of
Child and Child
Restraint
LATCH (Lower
Anchors and Top
Tether Anchor)
Child Safety
Seatbelt and Top
Tether Anchor
Seatbelt and LATCH
(Lower Anchors and
Top Tether Anchor)
XXXUp to 65 lb (29 kg)
XXOver 65 lb (29 kg)
36
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 41
Child Safety
CHILD RESTRAINTS RECOMMENDATION
Children weighing 40 lb (18 kg) or less (generally
age four or younger).
Children who have outgrown or no longer properly
fit in a child restraint (generally children who are
less than 57 in (1.45 m) tall, are greater than age
four and less than age 12, and between 40 lb (18 kg)
and 80 lb (36 kg) and upward to 100 lb (45 kg) if
recommended by your child restraint manufacturer).
Children who have outgrown or no longer properly
fit in a belt-positioning booster seat (generally chil-
dren who are at least 57 in (1.45 m) tall or greater
than 80 lb (36 kg) or 100 lb (45 kg) if recommended
by child restraint manufacturer).
Recommended Restraint TypeChild Size, Height, Weight, or Age
Use a child restraint (sometimes
called an infant carrier, convertible
seat, or toddler seat).
Use a belt-positioning booster
seat.
Use a vehicle seatbelt having the
lap belt snug and low across the
hips, shoulder belt centered across
the shoulder and chest, and seat
backrest upright.
You are required by law to properly use
child restraints for infants and toddlers in
the United States, Canada and Mexico.
Many states and provinces require that
small children use approved booster seats
until they reach age eight, a height of 57 in
(1.45 m) tall, or 80 lb (36 kg). Check your
local and state or provincial laws for
specific requirements about the safety of
children in your vehicle.
When possible, properly restrain children
12 years of age and under in a rear seating
position of your vehicle. Accident statistics
suggest that children are safer when
properly restrained in the rear seating
positions than in a front seating position.
When installing a rear facing child restraint,
adjust the vehicle seats to avoid
interference between the child restraint
and the vehicle seat in front of the child
restraint.
37
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
INSTALLING CHILD
RESTRAINTS
USING SEATBELTS
WARNING: Depending on where
you secure a child restraint, and
depending on the child restraint design,
you may block access to certain seatbelt
buckle assemblies and LATCH lower
anchors, rendering those features
potentially unusable. To avoid risk of
injury, make sure occupants only use
seating positions where they are able to
be properly restrained.
Note: Although the child restraint
illustrated is a forward facing child restraint,
the steps are the same for installing a rear
facing child restraint.
Perform the following steps when
installing a child restraint with seatbelts.
Page 42
E142529
E142530
E142531
E142875
Child Safety
1. Position the child restraint in a seat
with a seatbelt.
2. Pull down on the shoulder belt and
then grasp the shoulder belt and lap
belt together.
4. Insert the belt tongue into the proper
buckle for that seating position until
the latch engages. Make sure the
tongue is latched securely by pulling
on it.
3. While holding the shoulder and lap belt
portions together, route the tongue
through the child restraint according
to the child restraint manufacturer's
instructions. Make sure you did not
twist the belt webbing.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
5. To put the retractor in the automatic
locking mode, grasp the shoulder
portion of the belt and pull downward
until you pull all of the seatbelt out.
Note: The automatic locking mode is
available on the front passenger and rear
seats. This vehicle does not require the use
of a locking clip.
6. Allow the belt to retract to remove
slack. The seatbelt clicks as it retracts
to indicate it is in the automatic locking
mode.
38
Page 43
E142533
E142534
Child Safety
7. Pull the seatbelt out of the retractor to
make sure the retractor is in the
automatic locking mode. You should
not be able to pull more belt out. If the
retractor is not locked, unbuckle the
belt and repeat Steps 5 and 6.
8. Remove remaining slack from the belt.
Force the seat down with extra weight,
for example, by pressing down or
kneeling on the child restraint while
pulling up on the shoulder belt in order
to force slack from the belt. This is
necessary to remove the remaining
slack that exists once you add the extra
weight of the child to the child restraint.
It also helps to achieve the proper
snugness of the child restraint to your
vehicle. Sometimes, a slight lean
toward the buckle helps to remove
remaining slack from the belt.
9. If the child restraint has a tether strap,
attach it.
10. Before placing the child in the seat,
forcibly move the seat forward and
back to make sure the seat is securely
held in place.
To check this, grab the seat at the belt path
and attempt to move it side to side and
forward and back. There should be no
more than 1 in (2.5 cm) of movement.
We recommend checking with a NHTSA
Certified Child Passenger Safety
Technician to make certain the child
restraint is properly installed. In Canada,
check with Transport Canada for referral
to a Child Car Seat Clinic.
USING LOWER ANCHORS AND
TETHERS FOR CHILDREN
WARNING: Do not attach two child
safety restraints to the same anchor. In
a crash, one anchor may not be strong
enough to hold two child safety restraint
attachments and may break, causing
serious injury or death.
39
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 44
Child Safety
WARNING: Depending on where
you secure a child restraint, and
depending on the child restraint design,
you may block access to certain seatbelt
buckle assemblies and LATCH lower
anchors, rendering those features
potentially unusable. To avoid risk of
injury, make sure occupants only use
seating positions where they are able to
be properly restrained.
The Lower Anchors and Tethers for
Children (LATCH) system has three vehicle
anchor points:
•Two lower anchors where the vehicle
seat backrest and seat cushion meet,
called the seat bight.
•One top tether anchor behind that
seating position.
LATCH compatible child restraints have
two rigid or webbing mounted
attachments. These attachments connect
to the two lower anchors at the LATCH
equipped seating positions in your vehicle.
This type of attachment method
eliminates the need to use seatbelts to
attach the child restraint.
However, you can still use the seatbelt to
attach the child restraint if the lower
anchors are not used. For forward-facing
child restraints, you must also attach the
top tether strap to the proper top tether
anchor if a top tether strap has been
provided with your child restraint.
Follow the instructions later in this chapter
on attaching child restraints with tether
straps.
INSTALLING A CHILD RESTRAINT
IN A CENTER SEAT
WARNING: The standardized
spacing for LATCH lower anchors is 11 in
(280 mm) center to center. Do not use
LATCH lower anchors for the center
seating position unless the child restraint
manufacturer's instructions permit and
specify using anchors spaced at least as
far apart as those in this vehicle.
The lower anchors at the center of the
second row bench seat are spaced 20 in
(52 cm) apart. The standardized spacing
for LATCH lower anchors is 11 in (28 cm)
center to center.
You cannot install a child restraint with
rigid LATCH attachments at the center
seating position. You can only use LATCH
compatible child restraints with
attachments on belt webbing at this
seating position provided that the child
restraint manufacturer's instructions
permit use with the anchor spacing stated.
Do not attach a child restraint to any lower
anchor if another child restraint is attached
to that anchor.
Each time you use the child restraint, check
that the seat is properly attached to the
lower anchors and tether anchor, if
applicable. Tug the child restraint from side
to side and forward and back where it is
secured to the vehicle. The seat should
move less than 1 in (2.5 cm).
If you did not properly anchor the child
restraint, the risk of a child being injured in
a crash greatly increases.
40
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 45
E190833
Child Safety
COMBINING THE SEATBELT AND
LOWER ANCHORS FOR
ATTACHING CHILD RESTRAINTS
When used in combination, you may attach
either the seatbelt or the LATCH lower
anchors first, provided a proper installation
is achieved. Attach the tether strap
afterward, if it is included with the child
restraint.
USING TETHER STRAPS
Many forward-facing child restraints
include a tether strap which extends from
the back of the child restraint and hooks
to an anchoring point called the top tether
anchor. Tether straps are available as an
accessory for many older child restraints.
Contact the manufacturer of your child
restraint for information about ordering a
tether strap, or to obtain a longer tether
strap if the tether strap on your child
restraint does not reach the appropriate
top tether anchor in the vehicle.
Attach the tether strap only to the
appropriate tether anchor. The tether strap
may not work properly if attached
somewhere other than the correct tether
anchor.
If you install a child restraint with rigid
LATCH attachments, do not tighten the
tether strap enough to lift the child
restraint off the vehicle seat cushion when
the child is seated in it. Keep the tether
strap just snug without lifting the front of
the child restraint. Keeping the child
restraint just touching the vehicle seat
gives the best protection in a severe crash.
Once you have installed the child restraint
using either the seatbelt, the lower anchors
of the LATCH system, or both, you can
attach the top tether strap.
Perform the following steps to install a
child restraint with tether anchors:
For second row outermost seating
positions, route the child restraint tether
strap over the seat backrest, under the
head restraint and between the head
restraint posts. If needed, remove the head
restraint to improve the fit of the child
restraint or tether strap.
For the second row center seating position,
route the child restraint tether strap over
the top of the head restraint. If needed,
remove the head restraint to improve the
fit of the child restraint or tether strap. See
Head Restraint Components (page 151).
For third row seating positions, route the
child restraint tether strap over the seat
backrest, under the head restraint and
between the head restraint posts. If
needed, fold the head restraint down to
improve the fit of the child restraint or
tether strap. See Head RestraintComponents (page 151).
1. Route the tether strap.
2. Locate the correct anchor for the
selected seating position.
3. Clip the tether strap to the anchor as
shown. The tether hook may be
twisted ½ turn to improve installation.
If you clip the tether strap incorrectly,
the child restraint may not be retained
properly in the event of a crash.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
41
Page 46
E142595
E68924
Child Safety
4. Tighten the child restraint tether strap
according to the manufacturer's
instructions.
If the child restraint is not anchored
properly, the risk of injury to a child greatly
increases in a crash.
If your child restraint system has a tether
strap, and the child restraint manufacturer
recommends its use, we also recommend
its use.
Note: The cargo tie downs at the rear edge
of the floor are not tether anchors.
BOOSTER SEATS
Use a belt-positioning booster seat for
children who have outgrown or no longer
properly fit in a child restraint and meet
the following criteria.
•Generally children who are less than
57 in (1.45 m) tall.
•Are greater than age four (4) and less
than age twelve (12).
•Are between 40 lb (18 kg) and 80 lb
(36 kg) and upward to 100 lb (45 kg).
Many state and provincial laws require that
children use approved booster seats until
they reach age eight, a height of 57 in
(1.45 m) tall, or 80 lb (36 kg).
Booster seats should be used until you can
answer yes to all of these questions when
seated without a booster seat:
•Can the child sit all the way back
against their vehicle seat backrest with
knees bent comfortably at the edge of
the seat cushion?
•Can the child sit without slouching?
•Does the lap belt rest low across the
hips?
•Is the shoulder belt centered on the
shoulder and chest?
•Can the child stay seated like this for
the whole trip?
Always use booster seats in conjunction
with your vehicle lap and shoulder belt.
Types of Booster Seats
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
•Backless booster seats
If your backless booster seat has a
removable shield, remove the shield.
42
Page 47
E70710
E142596
Child Safety
If a vehicle seating position has a low seat
backrest or no head restraint, a backless
booster seat may place your child's head,
as measured at the tops of the ears, above
the top of the seat. In this case, move the
backless booster to another seating
position with a higher seat backrest or
head restraint and lap and shoulder belts,
or consider using a high-back booster seat.
•High-back booster seats
If, with a backless booster seat, you cannot
find a seating position that adequately
supports your child's head, a high-back
booster seat would be a better choice.
Children and booster seats vary in size and
shape. Choose a booster that keeps the
lap belt low and snug across the hips,
never up across the stomach, and lets you
adjust the shoulder belt to cross the chest
and rest snugly near the center of the
shoulder.
The following drawings compare the ideal
fit to a shoulder belt uncomfortably close
to the neck and a shoulder belt that could
slip off the shoulder. The drawings also
show how the lap belt should be low and
snug across the child's hips.
43
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 48
E142597
E287259
Child Safety
If the booster seat slides on the vehicle
seat upon which it is being used, placing a
rubberized mesh sold as shelf or carpet
liner under the booster seat may improve
this condition. Do not use any item thicker
than this under the booster seat. Check
with the booster seat manufacturer's
instructions.
CHILD SAFETY LOCKS
WARNING: You cannot open the
rear doors from inside if you have put the
child safety locks on.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
A child safety lock is on the rear edge of
each rear door. You must set the child
safety lock separately on each door.
Left-Hand Side
Turn the key clockwise to switch the child
lock on and counter clockwise to switch it
off.
Right-Hand Side
Turn the key counter clockwise to switch
the child lock on and clockwise to switch
it off.
44
Page 49
Child Safety
Note: To make sure the child safety lock is
on, pull the inside door handle twice to verify
the door does not open.
Note: To open the rear doors from inside
the vehicle when the child lock is engaged,
roll down the rear window and use the
outside door handle. Or have someone
outside the vehicle open the door.
45
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 50
Seatbelts
SEATBELT PRECAUTIONS
WARNING: Always drive and ride
with your seatback upright and the lap
belt snug and low across the hips.
WARNING: Children must always
be properly restrained.
WARNING: Do not allow a
passenger to hold a child on their lap
when your vehicle is moving. Failure to
follow this instruction could result in
personal injury or death in the event of a
sudden stop or crash.
WARNING: All occupants of your
vehicle, including the driver, should
always properly wear their seatbelts,
even when an airbag supplemental
restraint system is provided. Failure to
properly wear your seatbelt could
seriously increase the risk of injury or
death.
WARNING: It is extremely
dangerous to ride in a cargo area, inside
or outside of a vehicle. In a crash, people
riding in these areas are more likely to be
seriously injured or killed. Do not allow
people to ride in any area of your vehicle
that is not equipped with seats and
seatbelts. Make sure everyone in your
vehicle is in a seat and properly using a
seatbelt. Failure to follow this warning
could result in serious personal injury or
death.
WARNING: In a rollover crash, an
unbelted person is significantly more
likely to die than a person wearing a
seatbelt.
WARNING: Each seating position
in your vehicle has a specific seatbelt
assembly made up of one buckle and
one tongue designed to be used as a pair.
Use the shoulder belt on the outside
shoulder only. Never wear the shoulder
belt under the arm. Never use a single
seatbelt for more than one person.
WARNING: Even with advanced
restraints systems, properly restrain
children 12 and under in a rear seating
position. Failure to follow this could
seriously increase the risk of injury or
death.
WARNING: Seatbelts and seats
may be hot in a vehicle that is in the
sunshine. The hot seatbelts or seats may
burn a small child. Check seat covers and
buckles before you place a child
anywhere near them.
WARNING: If your vehicle is
involved in a crash, have the seatbelts
and associated components inspected
as soon as possible. Failure to follow this
instruction could result in personal injury
or death.
All seating positions in this vehicle have
seatbelts. All occupants of the vehicle
should properly wear their seatbelts, even
when an airbag supplemental restraint
system is provided.
The seatbelt system consists of:
•Lap and shoulder seatbelts.
•A shoulder seatbelt with automatic
locking mode, except driver seatbelt.
•Height adjusters at the front outermost
seating positions.
•Seatbelt pretensioners at the front
outermost and second row outermost
seating positions.
46
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 51
E338014
B
A
Seatbelts
A seatbelt warning light and
tone.
Crash sensors and monitoring
system with a readiness
indicator.
The seatbelt pretensioners are designed
to tighten the seatbelts when activated. In
frontal and near-frontal crashes, the
seatbelt pretensioners may be activated
alone or, if the crash is of sufficient severity,
together with the front airbags. In side
crashes and rollovers, the pretensioners
will be activated when the Safety Canopy
is activated.
FASTENING AND
UNFASTENING THE
SEATBELTS
All seatbelts in your vehicle are a
three-point combination lap and shoulder
seatbelt.
Seatbelt tongue.A
Seatbelt buckle.B
1. Pull the seatbelt out steadily.
Note: It may lock if you pull it sharply or if
the vehicle is on a slope.
2. Insert the tongue into the buckle.
3. Pull the seatbelt tight to remove any
slack.
Unfastening the Seatbelts
1. Press the red button on the buckle to
release the seatbelt.
2. Hold the seatbelt tongue and let it
retract completely and smoothly to its
stowed position.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
47
Page 52
E142591
Seatbelts
SENSITIVE LOCKING MODE
WHAT IS SENSITIVE LOCKING
MODE
Sensitive locking mode is a seatbelt
retractor feature that allows shoulder belt
length adjustment according to your
movements and locking in response to
vehicle movement.
HOW DOES SENSITIVE LOCKING
MODE WORK
If the driver suddenly brakes, turns a corner
sharply, or the vehicle receives an impact
of about 5 mph (8 km/h) or more, the
seatbelts lock to help reduce forward
movement of the driver and passengers.
In addition, the seatbelt retractor locks if
you pull the seatbelt webbing out too
quickly. If the retractor locks, slowly lower
the height adjuster to allow the seatbelt
to retract.
If the retractor does not unlock, pull the
seatbelt out slowly then feed a small
length of webbing back toward the stowed
position.
For rear seatbelts, recline the rear seat
backrest or push the seat backrest cushion
away from the seatbelt. Feed a small
length of webbing back toward the stowed
position.
AUTOMATIC LOCKING MODE
WHEN TO USE AUTOMATIC
LOCKING MODE
Use this mode any time you install a child
restraint in the front passenger seating
position or any rear seating position.
Properly restrain children 12 years old and
under in a rear seat whenever possible.
Note: Automatic locking mode is not
available on the driver seatbelt.
ENGAGING AUTOMATIC LOCKING
MODE
1. Fasten the combination lap and
shoulder belt.
2. Grasp the shoulder portion and pull
downward until you pull the entire belt
out.
3. Allow the belt to retract. As the belt
retracts, you will hear a clicking sound.
This indicates the seatbelt is now in the
automatic locking mode.
WHAT IS AUTOMATIC LOCKING
MODE
This feature keeps the seatbelts
pre-locked. The belt still retracts to remove
any slack in the shoulder belt.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
DISENGAGING AUTOMATIC
LOCKING MODE
Unbuckle the combination lap and
shoulder belt and allow it to retract
completely to disengage the automatic
locking mode and activate the vehicle
sensitive locking mode.
48
Page 53
E142590
E201573
Seatbelts
ADJUSTING THE SEATBELTS
DURING PREGNANCY
WARNING: Always ride and drive
with your seatback upright and properly
fasten your seatbelt. Fit the lap portion
of the seatbelt snugly and low across
the hips. Position the shoulder portion of
the seatbelt across your chest. Pregnant
women must follow this practice. See
the following figure.
1. Press the button and slide the height
adjuster up or down.
2. Release the button and pull down on
the height adjuster to make sure it is
locked in place.
SEATBELT REMINDER
HOW DOES THE SEATBELT
REMINDER WORK
Pregnant women should always wear their
seatbelt. Position the lap belt portion of a
combination lap and shoulder belt low
across the hips below the belly and worn
as tight as comfort allows. Position the
shoulder belt to cross the middle of the
shoulder and the center of the chest.
ADJUSTING THE SEATBELT
HEIGHT
WARNING: Position the seatbelt
height adjuster so that the seatbelt rests
across the middle of your shoulder.
Failure to adjust the seatbelt correctly
could reduce its effectiveness and
increase the risk of injury in a crash.
49
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
WARNING: The system will only
provide protection when you use the
seatbelt correctly.
This system monitors all seating positions
and provides audio and graphic feedback.
SEATBELT REMINDER
INDICATORS
This lamp illuminates if you do
not fasten your seatbelt when
you switch the ignition on. The
lamp switches off when you fasten your
seatbelt or about one minute has elapsed.
Page 54
E206718
E274569
E274570
E274703
Seatbelts
When the initial warning expires for the
driver, more warnings are provided for the
driver and front passenger. This lamp
illuminates if you or your front passenger
do not fasten the seatbelt buckle and the
vehicle speed exceeds 6 mph (10 km/h).
Note: To avoid inadvertent warnings, do
not place large objects on the front
passenger seat.
This lamp illuminates when you
switch the ignition on, identifying
the number of seating positions
with fastened buckles. It illuminates again
when a seating position changes from
unfastened to fastened.
This warning displays if an occupant
unfastens the rear seatbelt buckle or it
becomes unfastened.
Note: If a rear seat is unoccupied, or an
occupant never fastens the seatbelt buckle
to begin with, the warning does not display.
Note: Front seating positions appear in this
warning display. Warnings for unfastened
front seatbelt buckles appear in the initial
warning lamp.
Checking Seatbelt Status
To view the seatbelt status, use the
instrument cluster display controls on the
steering wheel.
Seatbelt fastened.A
Seatbelt not fastened.B
Seatbelt recently unfastened.C
Fault.D
SEATBELT REMINDER AUDIBLE
WARNINGS
A warning tone sounds if you do not fasten
your seatbelt when you switch the ignition
on. The tone switches off when you fasten
your seatbelt or about one minute elapses.
When the initial warning expires for the
driver, more warnings are provided for the
driver and front passenger. This warning
tone sounds if you or your front passenger
do not fasten the seatbelt buckle and the
vehicle speed exceeds 6 mph (10 km/h).
This tone also sounds if an occupant
unfastens the rear seatbelt buckle or it
becomes unfastened.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
50
Page 55
Seatbelts
SWITCHING THE SEATBELT
REMINDER ON AND OFF
WARNING: While the system
allows you to deactivate it, this system
is designed to improve your chances of
being safely belted and surviving an
accident. We recommend you leave the
system activated for yourself and others
who may use the vehicle.
Note: The driver and front passenger
warnings switch off independently. When
you perform this procedure for one seating
position, do not buckle the other position as
this cancels the process.
Read Steps 1-4 before proceeding with the
programming procedure.
Make sure that:
•You set the parking brake.
•The transmission is in park (P).
•The ignition is off.
•You close all vehicle doors.
•You unfasten the driver and front
passenger seatbelts.
1. Switch the ignition on. Do not start the
engine.
2. Immediately start the deactivation or
reactivation procedure in Step 3. Once
you start Step 3, you must complete
the procedure within 30 seconds.
3. For the seating position you are
switching off or on, fasten then
unfasten the seatbelt four times at a
moderate speed, ending in the
unfastened state. The seatbelt warning
light flashes for confirmation.
This switches the feature off for that
seating position if it is currently on.
This switches the feature on for that
seating position if it is currently off.
CHECKING THE SEATBELTS
Check the seatbelts and child restraints
periodically to make sure they work
properly and are not damaged. Make sure
there are no nicks, tears or cuts. Replace if
necessary.
Check the following seatbelt assemblies
after a crash.
•Retractors.
•Buckles.
•Front seatbelt buckle assemblies.
•Shoulder belt height adjusters.
•Shoulder belt guide on seat backrest.
•Child restraint LATCH and tether
anchors.
•Attaching hardware.
Read the child restraint manufacturer's
instructions for additional inspection and
maintenance information specific to the
child restraint.
We recommend that all seatbelt
assemblies in use in vehicles involved in a
crash be replaced. However, if the crash
was minor and an authorized dealer finds
that the belts do not show damage and
continue to operate properly, they do not
need to be replaced. Seatbelt assemblies
not in use during a crash should also be
checked and replaced if either damage or
improper operation is noted.
Properly care for seatbelts. See Cleaning
Seatbelts (page 381).
SEATBELT EXTENSIONS
WARNING: Persons who fit into
the vehicle's seatbelt should not use an
extension. Unnecessary use could result
in serious personal injury in the event of
a crash.
51
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 56
Seatbelts
WARNING: Only use extensions
provided free of charge by our dealers.
The dealer will provide an extension
designed specifically for this vehicle,
model year and seating position. The use
of an extension intended for another
vehicle, model year or seating position
may not offer you the full protection of
your vehicle's seatbelt restraint system.
WARNING: Never use seatbelt
extensions to install child restraints.
WARNING: Do not use extensions
to change the way the seatbelt fits
across the torso, over the lap or to make
the seatbelt buckle easier to reach.
If, because of body size or driving position,
it is not possible to properly fasten the
seatbelt over your lap and shoulder, an
extension that is compatible with the
seatbelts is available free of charge from
our dealers. Only use our seatbelt
extensions made by the original equipment
seatbelt manufacturer with our seatbelts.
Ask your authorized dealer if your extension
is compatible with your vehicle restraint
system.
52
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 57
Personal Safety System™
WHAT IS THE PERSONAL
SAFETY SYSTEM
An advanced safety system that protects
occupants in frontal crashes.
HOW DOES THE PERSONAL
SAFETY SYSTEM WORK
This system provides an improved level of
frontal crash protection to front seat
occupants and is designed to reduce the
risk of airbag-related injuries. The system
analyzes occupant conditions and crash
severity before activating the appropriate
safety devices. During a crash, the
restraints control module may deploy the
seatbelt pretensioners, and one or both
stages of the dual-stage airbags based on
crash severity and occupant conditions.
PERSONAL SAFETY SYSTEM
COMPONENTS
•Driver and passenger dual-stage airbag
supplemental restraints.
•Front seat outermost seatbelts with
pretensioners, energy management
retractors and seatbelt usage sensors.
•Driver seat position sensor.
•Front passenger sensing system.
•Passenger airbag off and on indicators.
•Front crash severity sensors.
•Restraints control module with impact
and safing sensors.
•Restraint system warning light and
tone.
•The electrical wiring for the airbags,
crash sensors, seatbelt pretensioners,
front seatbelt usage sensors, driver
seat position sensor, front passenger
sensing system and indicator lights.
53
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 58
E151127
Airbags
HOW DO THE FRONT AIRBAGS
WORK
The driver and front passenger airbags
deploy during significant frontal and near
frontal crashes.
The driver and passenger front airbag
system consists of:
•Driver and passenger airbag modules.
•Front passenger sensing system.
•Crash sensors and monitoring system
with readiness indicator. See Crash
Sensors and Airbag Indicator (page
61).
The airbags are a supplemental restraint
system and are designed to work with the
seatbelts to help protect the driver and
right front passenger from certain upper
body injuries. Airbags do not inflate slowly;
there is a risk of injury from a deploying
airbag.
Note: You will hear a loud bang and see a
cloud of harmless powdery residue if an
airbag deploys. This is normal.
The airbags inflate and deflate rapidly
upon activation. After airbag deployment,
it is normal to notice a smoke-like, powdery
residue or smell the burnt propellant. This
may consist of cornstarch, talcum powder
(to lubricate the bag) or sodium
compounds (for example, baking soda)
that result from the combustion process
that inflates the airbag. Small amounts of
sodium hydroxide may be present which
may irritate the skin and eyes, but none of
the residue is toxic.
Contact with a deploying airbag may cause
abrasions or swelling. Temporary hearing
loss is also a possibility as a result of the
noise associated with a deploying airbag.
Because airbags must inflate rapidly and
with considerable force, there is the risk of
death or serious injuries such as fractures,
facial and eye injuries or internal injuries,
particularly to occupants who are not
properly restrained or are otherwise out of
position at the time of airbag deployment.
Thus, it is extremely important that
occupants be properly restrained as far
away from the airbag module as possible.
Routine maintenance of the airbags is not
required.
HOW DO THE SIDE AIRBAGS
WORK
WARNING: Do not place objects
or mount equipment on or near the
airbag cover, on the side of the front or
rear seatbacks, or in areas that may
come into contact with a deploying
airbag. Failure to follow these
instructions may increase the risk of
personal injury in the event of a crash.
WARNING: Accessory seat covers
not released by Ford Motor Company
could prevent the deployment of the
airbags and increase the risk of injuries
in a crash.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
54
Page 59
E152533
Airbags
WARNING: Do not lean your head
on the door. The side airbag could injure
you as it deploys from the side of the
seatback.
The side airbags are on the outermost side
of the seat backrests of the front seats. In
certain sideways crashes or rollovers, the
airbags will be inflated. The airbag was
designed to inflate between the door panel
and occupant to further enhance the
protection provided to occupants in side
impact crashes.
The system consists of the following:
•A label or embossed side panel
indicating that side airbags are fitted
to your vehicle.
•Side airbags inside the driver and front
passenger seat backrests.
•Crash sensors and monitoring system
with readiness indicator. See CrashSensors and Airbag Indicator (page
61).
HOW DO THE KNEE AIRBAGS
WORK
WARNING: To reduce risk of injury,
do not obstruct or place objects in the
deployment path of the airbag.
WARNING: Close the glove box
door when your vehicle is moving. Failure
to follow this instruction could reduce
the effectiveness of the passenger knee
airbag and increase the risk of injury in a
crash.
A driver knee airbag is under or within the
instrument panel. A passenger knee airbag
is within or under the glove compartment.
During a crash, the restraints control
module may activate the driver and
passenger knee airbags based on crash
severity and occupant conditions. Under
certain crash and occupant conditions, the
driver and passenger knee airbag may
deploy but the driver front airbag may not
activate.
As with front and side airbags, it is
important to be properly seated and
restrained to reduce the risk of death or
serious injury.
Make sure the knee airbag is
operating properly. See Crash
Sensors and Airbag Indicator
(page 61).
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
55
Page 60
E75004
Airbags
HOW DOES THE SAFETY
CANOPY™ WORK
WARNING: Do not place objects
or mount equipment on or near the
headliner at the siderail that may come
into contact with a deploying curtain
airbag. Failure to follow these
instructions may increase the risk of
personal injury in the event of a crash.
WARNING: Do not lean your head
on the door. The curtain airbag could
injure you as it deploys from the
headliner.
WARNING: To reduce risk of injury,
do not obstruct or place objects in the
deployment path of the airbag.
The Safety Canopy deploys during
significant side crashes or when a certain
likelihood of a rollover event is detected
by the rollover sensor. The Safety Canopy
is mounted to the roof side-rail sheet
metal, behind the headliner, above each
row of seats. In certain sideways crashes
or rollover events, the Safety Canopy will
be activated, regardless of which seats are
occupied. The Safety Canopy inflates
between the side window area and
occupants to further enhance protection
provided in side impact crashes and
rollover events.
The system consists of the following:
•Safety Canopy curtain airbags above
the trim panels over the front and rear
side windows identified by a label or
wording on the headliner or roof-pillar
trim.
•A flexible headliner which opens above
the side doors to allow air curtain
deployment
· Crash sensors and monitoring
system with a readiness
indicator. See Crash Sensors
and Airbag Indicator (page 61).
Properly restrain children 12 years old and
under in the rear seats. The Safety Canopy
will not interfere with children restrained
using a properly installed child or booster
seat because it is designed to inflate
downward from the headliner above the
doors along the side window opening.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
AIRBAG PRECAUTIONS
WARNING: Airbags do not inflate
slowly or gently, and the risk of injury
from a deploying airbag is the greatest
close to the trim covering the airbag
module.
56
Page 61
Airbags
WARNING: All occupants of your
vehicle, including the driver, should
always properly wear their seatbelts,
even when an airbag supplemental
restraint system is provided. Failure to
properly wear your seatbelt could
seriously increase the risk of injury or
death.
WARNING: Properly secure
children 12 years old and under in a rear
seating position whenever possible. If
you are unable to properly secure all
children in a rear seating position,
properly secure the largest child on the
front seat. If you must use a forward
facing child restraint on the front seat,
move the seat as far back as possible.
Failure to follow these instructions could
result in personal injury or death.
WARNING: Do not place your arms
on the airbag cover or through the
steering wheel. Failure to follow this
instruction could result in personal injury.
WARNING: Keep the areas in front
of the airbags free from obstruction. Do
not affix anything to or over the airbag
covers. Objects could become projectiles
during airbag deployment. Failure to
follow this instruction could result in
personal injury or death.
WARNING: To reduce risk of injury,
do not obstruct or place objects in the
deployment path of the airbag.
WARNING: Do not place a
rearward facing child restraint in front of
an active airbag. Failure to follow this
instruction could result in personal injury
or death.
WARNING: Do not attempt to
service, repair, or modify the
supplementary restraint system or
associated components. Failure to
follow this instruction could result in
personal injury or death.
WARNING: Several airbag system
components get hot after inflation. To
reduce the risk of injury, do not touch
them after inflation.
WARNING: If a supplementary
restraint system component has
deployed, it will not function again. Have
the system and associated components
inspected as soon as possible. Failure to
follow this instruction could result in
personal injury or death.
PROPERLY ADJUSTING THE
DRIVER AND FRONT
PASSENGER SEATS
WARNING: National Highway
Traffic Safety Administration (NHTSA)
recommends a minimum distance of at
least 10 in (25 cm) between an
occupant's chest and the driver airbag
module.
To properly position yourself away from
the airbag:
•Move your seat to the rear as far as you
can while still reaching the pedals
comfortably.
•Recline the seat slightly one or two
degrees from the upright position.
57
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 62
E142846
E181984
Airbags
After all occupants have adjusted their
seats and put on seatbelts, it is very
important that they continue to sit
properly. Properly seated occupants sit
upright, lean against the seat backrest, and
center themselves on the seat cushion,
with their feet comfortably extended on
the floor. Sitting improperly can increase
the chance of injury in a crash event. For
example, if an occupant slouches, lies
down, turns sideways, sits forward, leans
forward or sideways, or puts one or both
feet up, the chance of injury during a crash
greatly increases.
CHILDREN AND AIRBAGS
WARNING: Do not place a
rearward facing child restraint in front of
an active airbag. Failure to follow this
instruction could result in personal injury
or death.
If two adults and a child occupy a vehicle
without rear seats, properly restrain the
child in the center front seat unless doing
so would interfere with driving your vehicle.
This provides lap and shoulder belt
protection for all occupants, and airbag
protection for the adults. A child or infant
properly restrained in the center front seat
should have a reduced risk to serious injury
from the airbags.
FRONT PASSENGER SENSING
SYSTEM
WHAT IS THE FRONT PASSENGER
SENSING SYSTEM
This system detects a properly seated
occupant and determines if the front
passenger airbag should be enabled.
HOW DOES THE FRONT
PASSENGER SENSING SYSTEM
WORK
The system uses a passenger airbag status
indicator which illuminates indicating that
the front passenger frontal airbag is either
enabled or disabled.
Note: When you first switch the ignition on,
the passenger airbag status indicator off
and on lamps illuminate for a short period
to confirm they are functional.
Children must always be properly
restrained. Accident statistics suggest that
children are safer when properly restrained
in the rear seating positions than in the
front seating position. Failure to follow
these instructions may increase the risk of
injury in a crash.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
The indicator lamps are in the center stack
of the instrument panel.
58
Page 63
Airbags
The front passenger sensing system is
designed to disable the front passenger
frontal airbag under these conditions:
•The front passenger seat is
unoccupied.
•The system determines an infant is
present in a child restraint.
•A passenger takes their weight off of
the seat for a period of time.
•If there is a problem with the airbag
system or the passenger sensing
system.
Note: Even with this technology, parents
are strongly encouraged to always properly
restrain children in the rear seat.
•When the front passenger sensing
system disables the front passenger
frontal airbag, the passenger airbag
status indicator illuminates the off
lamp.
•If you have installed the child restraint
and the passenger airbag status
indicator illuminates the on lamp,
switch your vehicle off, remove the
child restraint from your vehicle and
reinstall the restraint following the
child restraint manufacturer's
instructions.
The front passenger sensing system works
with sensors that are part of the front
passenger seat and seatbelt. The sensors
are designed to detect the presence of a
properly seated occupant and determine
if the front passenger frontal airbag should
be enabled.
•When the front passenger sensing
system enables the front passenger
frontal airbag, the passenger airbag
status indicator illuminates the on
lamp.
If a person of adult size is sitting in the front
passenger seat, but the passenger airbag
status indicator off lamp is illuminated, it
is possible that the person is not sitting
properly in the seat. If this happens:
•Switch your vehicle off and ask the
person to place the seat backrest in an
upright position.
•Have the person sit upright in the seat,
centered on the seat cushion, with the
person's legs comfortably extended.
•Restart your vehicle and have the
person remain in this position for about
two minutes. This allows the system
to detect that person and enable the
passenger frontal airbag.
•If the indicator off lamp remains
illuminated even after this, you should
advise the person to ride in the rear
seat.
After all occupants have adjusted their
seats and put on seatbelts, it is very
important that they continue to sit upright,
leaning against the seat backrest, and
centered on the seat cushion, with their
feet comfortably extended on the floor.
Sitting improperly can increase the chance
of injury in a crash event. For example, if
an occupant slouches, lies down, turns
sideways, sits forward, leans forward or
sideways, or puts one or both feet up, the
chance of injury during a crash greatly
increases.
If you think that the state of the passenger
airbag status indicator lamp is incorrect,
check for the following:
•Objects lodged underneath the seat.
•Objects between the seat cushion and
the center console.
•Objects hanging off the seat backrest.
•Objects stowed in the seat backrest
map pocket.
•Objects placed on the occupant's lap.
59
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 64
Airbags
•Cargo interference with the seat
•Other passengers pushing or pulling on
the seat.
•Rear passenger feet and knees resting
or pushing on the seat.
The listed conditions could cause the
weight of a properly seated occupant to
be incorrectly interpreted by the front
passenger sensing system. The person in
the front passenger seat could appear
heavier or lighter due to the conditions
listed.
Make sure the front passenger
sensing system is operating
properly. See Crash Sensors
and Airbag Indicator (page 61).
If the airbag readiness light is on, do the
following:
•Pull your vehicle over.
•Switch your vehicle off.
•Check for any objects lodged
underneath the front passenger seat
or cargo interfering with the seat.
•Remove the obstruction if found.
•Restart your vehicle.
•Wait at least two minutes and verify
that the airbag readiness light in the
instrument cluster is no longer
illuminated.
•If the airbag readiness light in the
instrument cluster remains illuminated,
there may be a problem due to the
front passenger sensing system.
Do not attempt to repair or service the
system. Take your vehicle in for service
immediately.
If it is necessary to modify an advanced
front airbag system to accommodate a
person with disabilities, contact your
Customer Relationship Center. See
Contacting Us (page 15).
FRONT PASSENGER SENSING
SYSTEM PRECAUTIONS
WARNING: Sitting improperly, out
of position or with the seatback reclined
too far can take weight off the seat
cushion and affect the decision of the
passenger sensing system, resulting in
serious injury or death in the event of a
crash. Always sit upright against your
seat back, with your feet on the floor.
WARNING: Any alteration or
modification to the front passenger seat
may affect the performance of the front
passenger sensing system. This could
seriously increase the risk of injury or
death.
WARNING: Do not place objects
under the front passenger seat or
between the seat and the center
console. Failure to follow this instruction
may interfere with the front passenger
seat sensing system and increase the
risk of injury or death in a crash.
WARNING: Check the passenger
airbag indicator lamp for proper airbag
status. Failure to follow this instruction
could result in personal injury or death.
60
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 65
Airbags
FRONT PASSENGER SENSING SYSTEM INDICATORS
Occupant
ON: Not Illuminated
ON: Not Illuminated
ON: Illuminated
CRASH SENSORS AND
AIRBAG INDICATOR EXCLUDING: POLICE
WARNING: Modifying or adding
equipment to the front of your vehicle
could affect the performance of the
airbag system, increasing the risk of
injury. This includes the hood, bumper
system, frame, front body structure, tow
hooks, hood pins, push bar and
snowplows.
Your vehicle has a collection of crash and
occupant sensors. These sensors provide
information to the restraints control
module which activates the following:
•Front seatbelt pretensioners.
•Driver airbag.
•Passenger airbag.
•Seat mounted side airbags.
•Safety Canopy.
Based on the type of crash, the restraints
control module deploys the appropriate
safety devices.
Indicator
Passenger AirbagPassenger Airbag Status
DisabledOFF: IlluminatedEmpty
DisabledOFF: IlluminatedChild
EnabledOFF: Not IlluminatedAdult
The restraints control module also
monitors the readiness of the above safety
devices plus the crash and occupant
sensors. The readiness of the safety
system is indicated by a warning indicator
light in the instrument cluster or by a
backup tone if the warning light is not
working. Routine maintenance of the
airbag is not required.
A difficulty with the system is indicated by
one or more of the following:
The readiness light will not
illuminate immediately after you
switch the ignition on.
•The readiness light either flashes or
stays on.
•You hear a series of five tones. The
tone pattern repeats periodically until
the problem, the light or both are
repaired.
If any of these things happen, even
intermittently, have the supplemental
restraint system serviced immediately.
Unless serviced, the system may not
function properly in the event of a crash.
61
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 66
Airbags
The fact that the seatbelt pretensioners
or front airbags did not activate for both
front seat occupants in a crash does not
mean that something is wrong with the
system. Rather, it means the restraints
control module determined the accident
conditions (crash severity, seatbelt usage)
were not appropriate to activate these
safety devices.
•The front airbags activate only in
frontal and near-frontal crashes. Front
airbags may activate in rollovers, side
impacts or rear impacts if the crash
causes sufficient frontal deceleration.
•The seatbelt pretensioners activate in
frontal, near-frontal and side crashes,
and in rollovers.
•The side airbags inflate in certain side
impact crashes or rollover events. Side
airbags may activate in other types of
crashes if the vehicle experiences
sufficient sideways motion or
deformation.
•The Safety Canopy inflates in certain
side impact crashes or rollover events.
The Safety Canopy may activate in
other types of crashes if the vehicle
experiences sufficient sideways motion
or deformation, or a certain likelihood
of rollover.
CRASH SENSORS AND
AIRBAG INDICATOR - POLICE
Your vehicle has a collection of crash and
occupant sensors. These sensors provide
information to the restraints control
module which activates the following:
•Seatbelt pretensioners.
•Driver airbag.
•Passenger airbag.
•Knee airbag(s).
•Seat mounted side airbags.
•Safety Canopy.
Based on the type of crash, the restraints
control module deploys the appropriate
safety devices.
The restraints control module also
monitors the readiness of the above safety
devices plus the crash and occupant
sensors. The readiness of the safety
system is indicated by a warning indicator
light in the instrument cluster or by a
backup tone if the warning light is not
working. Routine maintenance of the
airbag is not required.
A difficulty with the system is indicated by
one or more of the following:
•The readiness light either flashes or
stays on.
•You hear a series of five tones. The
tone pattern repeats periodically until
the problem, the light or both are
repaired.
WARNING: Modifying or adding
equipment to the front of your vehicle
could affect the performance of the
airbag system, increasing the risk of
injury. This includes the hood, bumper
system, frame, front body structure, tow
hooks, hood pins, push bar and
snowplows.
62
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
•The readiness light will not illuminate
immediately after you switch the
ignition on.
If any of these things happen, even
intermittently, have the supplemental
restraint system serviced at an authorized
dealer immediately. Unless serviced, the
system may not function properly in the
event of a crash.
Page 67
Airbags
The seatbelt pretensioners and the airbag
supplemental restraint system are
designed to activate when the vehicle
sustains frontal or sideways deceleration
sufficient to cause the restraints control
module to deploy a safety device or when
a certain likelihood of a rollover event is
detected by the rollover sensor.
The fact that the seatbelt pretensioners
or airbags did not activate for both front
seat occupants in a crash does not mean
that something is wrong with the system.
Rather, it means the restraints control
module determined the accident
conditions (crash severity, belt usage)
were not appropriate to activate these
safety devices.
•The front airbags activate only in
frontal and near-frontal crashes (not
rollovers, side impacts or rear impacts)
unless the crash causes sufficient
frontal deceleration.
•The seatbelt pretensioners activate in
frontal, near-frontal and side crashes
and in rollovers.
•The side airbags inflate in certain side
impact crashes and in rollovers. Side
airbags may activate in other types of
crashes if the vehicle experiences
sufficient sideways motion or
deformation.
•The knee airbag(s) may deploy based
on crash severity and occupant
conditions.
•The Safety Canopy inflates in certain
side impact crashes or rollover events.
The Safety Canopy may activate in
other types of crashes if the vehicle
experiences sufficient sideways motion
or deformation, or a certain likelihood
of rollover.
Airbags and Police Equipment
WARNING: Do not place objects
or mount equipment on or near the
airbag cover, on the side of the front or
rear seatbacks, or in areas that may
come into contact with a deploying
airbag. Failure to follow these
instructions may increase the risk of
personal injury in the event of a crash.
WARNING: Keep the areas in front
of the airbags free from obstruction. Do
not affix anything to or over the airbag
covers. Objects could become projectiles
during airbag deployment. Failure to
follow this instruction could result in
personal injury or death.
Dual driver and passenger airbags, side
airbags and knee airbags affect the way
police equipment can be mounted in police
vehicles.
Any surfaces that could come into contact
with an airbag, once it has deployed, must
not damage the airbag or alter its
deployment path.
Once the airbag has fully deployed, any
peripheral equipment surfaces that could
come into contact with the airbag (such
as when the airbag deflates with the
loading of an occupant) must not damage
the airbag or alter its deployment path.
Sharp edges, corners or protrusions could
damage the nylon airbag material and
reduce the effectiveness of the airbag.
Some approximate dimensions for airbags,
at full inflation, are provided. These
dimensions are somewhat flexible and
represent free form deployments without
the loading of occupants. The shaded
areas in Figures 8 through 10 represent
63
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 68
E201575
E201576
E201577
Airbags
available police equipment mounting
zones. These zones are shown for police
vehicles with standard bucket seats. The
zone dimensions provided in Figures 8
through 10 are approximate and will vary
with the loading of occupants in the seats.
All airbag and equipment mounting zone
dimensions are approximate due to
different airbag deployment
characteristics.
Do not mount equipment between the side
of the front seat and the door trim that will
block deployment of the side airbag.
Do not mount equipment between the
seats and the body side as shown in Figure
7 that would prevent the side curtain airbag
from achieving occupant coverage.
Figure 1 (Driver and Passenger Airbag
Dimensions)
Figure 2 (Side View of Driver Airbag at
Full Inflation)
27.5 in (700 mm).1.
Figure 3 (Top View of Driver and
Passenger Airbags at Full Inflation)
9.5 in (240 mm) from center of
1.
emblem.
13.8 in (350 mm) from center of
2.
airbag door.
28.3 in (720 mm).3.
Note: No objects should be placed between
the airbags due to airbag variability.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Front passenger airbag - 22.8 in
1.
(580 mm).
Front driver airbag – 17 in (430
2.
mm).
Note: No objects should be placed between
the driver side steering wheel airbag and the
passenger side dash airbag.
64
Page 69
E301094
Airbags
Figure 4 (Top View of Side Airbags at
Full Inflation-If equipped)
From outermost side of seat - 8
1.
Figure 5 (Side View of Side Airbag at
Full Inflation-If equipped)
3.
in (200 mm).
Forward of seat backrest - 15 in
2.
(380 mm).
Figure 6 (Side View of Side Curtain Dimension)
Up from side airbag module -
27.5 in (700 mm).
Roof rail to 1 in (25mm) below window sill.1.
Note: No objects should be placed on the
headliner or pillar trims (A through D) used
to conceal the airbag when stowed.
65
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 70
E301077
E201581
Airbags
Figure 7 (Front View of Side Curtain at
Full Inflation)
6 in (75mm) from pillar trim (A
1.
through D).
Figure 8 (Equipment Mounting Zones)
1.
Area on top of the instrument
panel (Note: Equipment must
not interfere with driver
visibility).
Airbag door must be kept clear
2.
for deployment of the airbag.
3.
Area in front of the center
console from the bottom to the
top of the instrument panel.
Area in front of electronic finish
4.
panel from the bottom to the
top of the instrument panel.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
66
Page 71
E206315
Airbags
Figure 9 (Equipment Mounting Zones)
Area on top of instrument panel.1.
Area in front of center console from tunnel up to instrument panel.2.
Prisoner screen (reference only).3.
10 in (254 mm).4.
Area on tunnel between seats.5.
Height: 8.5 in (216 mm).6.
12 in (305 mm).7.
Area on tunnel beneath center console.8.
Tunnel.9.
Depth: 1.5 in (38 mm).10.
67
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 72
Airbags
Figure 10 (Top View of Equipment
Mounting Zones)
1.
Area on top of the instrument
panel. Note: Equipment must
not interfere with driver visibility.
Area on tunnel between seats.2.
9 in (229 mm).3.
DISPOSING OF AIRBAGS
Contact your authorized dealer as soon as
possible. Airbags must be disposed of by
qualified personnel.
68
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 73
Pedestrian Alert System
WHAT IS THE PEDESTRIAN
ALERT SYSTEM
Due to the quiet operation of hybrid and
electric vehicles at low speeds, the system
creates a subtle sound to alert pedestrians.
The system is on when your vehicle is
running and not in park (P). Some sound
may be audible in the passenger
compartment.
69
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 74
911 Assist (If Equipped)
WHAT IS 911 ASSIST
911 Assist is an operating system feature
that can call for help.
For more information, visit
www
.owner.ford.com.
HOW DOES 911 ASSIST WORK
If a crash deploys an airbag, excluding knee
airbags and rear inflatable seatbelts, or
activates the fuel pump shut-off, your
vehicle may be able to contact emergency
services by dialing 911 through a paired and
connected Bluetooth® enabled phone.
Not all crashes deploy an airbag or activate
the fuel pump shut-off. If a connected cell
phone sustains damage or loses its
connection to the operating system during
a crash, the system searches for and tries
to connect to a previously paired cell
phone. The operating system then
attempts to call the emergency services.
Before making the call:
•The operating system provides about
10 seconds to cancel the call. If you fail
to cancel the call, the system attempts
to dial 911.
•The operating system says the
following, or a similar message: the
system will attempt to call 911, to
cancel the call, press Cancel on your
screen or press and hold the phone
button on your steering wheel.
If you do not cancel the call and the
operating system makes a successful call
a pre-recorded message plays for the 911
operator. The occupants in your vehicle
are able to talk with the operator. Be
prepared to provide your name, phone
number and location immediately because
not all 911 systems are capable of receiving
this information electronically.
During an emergency call the system
transmits vehicle data to the emergency
service.
EMERGENCY CALL
REQUIREMENTS
WARNING: Do not wait for 911
Assist to make an emergency call if you
can do it yourself. Dial emergency
services immediately to avoid delayed
response time which could increase the
risk of serious injury or death after a
crash. If you do not hear 911 Assist within
five seconds of the crash, the system or
phone may be damaged or
non-functional.
WARNING: Always place your
phone in a secure location in your vehicle
so it does not become a projectile or get
damaged in a crash. Failure to do so may
cause serious injury to someone or
damage the phone which could prevent
911 Assist from working properly.
WARNING: Unless the 911 Assist
setting is set on before a crash, the
system will not dial for help which could
delay response time, potentially
increasing the risk of serious injury or
death after a crash.
•The operating system must be
powered and working properly at the
time of the incident and throughout
feature activation and use.
•The 911 Assist feature must be set on
before the incident.
•You must pair and connect a
Bluetooth® enabled and compatible
cell phone to the operating system.
70
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 75
911 Assist (If Equipped)
•A connected Bluetooth® enabled
phone must have the ability to make
and maintain an outgoing call at the
time of the incident.
•A connected Bluetooth® enabled
phone must have adequate network
coverage, battery power and signal
strength.
•The vehicle must have battery power
and be located in the U.S., Canada or
in a territory in which 911 is the
emergency number.
Note: If any user sets 911 Assist to on or off,
that setting applies for all paired phones. If
911 Assist is switched off and the phone is
connected to the operating system, an icon
displays on the status bar.
Note: Every phone operates differently.
While 911 Assist works with most cellular
phones, some may have trouble using this
feature.
EMERGENCY CALL
LIMITATIONS
The 911 Assist feature only operates in the
U.S., Canada or in a territory in which 911 is
the emergency number.
This feature does not operate properly if:
•Your cellular phone or 911 Assist
hardware sustains damage in a crash.
•The vehicle's battery or the operating
system has no power.
•The phone(s) thrown from your vehicle
are the ones paired and connected to
the system.
71
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 76
E138629
E138623
E138625
E267940
Keys and Remote Controls
REMOTE CONTROL
LIMITATIONS
WARNING: Changes or
modifications not expressively approved
by the party responsible for compliance
could void the user's authority to operate
the equipment. The term "IC:" before the
radio certification number only signifies
that Industry Canada technical
specifications were met.
This device complies with Part 15 of the
FCC Rules and with Industry Canada
license-exempt RSS standard(s).
Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) This device
must accept any interference received,
including interference that may cause
undesired operation.
Make sure a valid remote control is within
3 ft (1 m) from the front door handles and
rear of vehicle.
The system may not function if:
•The remote control remains stationary
for about a minute.
•The vehicle battery has no charge.
•The remote control battery has no
charge.
•There is interference causing issues
with the remote control frequencies.
•The remote control is too close to
metal objects or electronic devices, for
example keys or a cell phone.
USING THE REMOTE CONTROL
- EXCLUDING: POLICE
WARNING: Do not leave a key or
remote control unattended in the vehicle.
Children or pets could operate the power
windows, moonroof or other controls.
Failure to follow this instruction could
result in personal injury or death.
Use your remote control to access various
vehicle systems.
Note: The buttons on your remote may vary
depending on the vehicle region or options.
Unlock
Press the button to unlock all
doors. See Unlocking and
Locking the Doors Using the
Remote Control (page 79).
Lock
Press the button to lock all
doors. See Unlocking and
Locking the Doors Using the
Remote Control (page 79).
Remote Start (If Equipped)
Press the button twice within
three seconds to remote start.
See Remotely Starting and
Stopping the Vehicle (page 135).
Opening and Closing the Liftgate
Press the button twice within
three seconds to open and close
the liftgate. See Opening the
Liftgate Using the Remote Control
(page 89).
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
72
Page 77
E138624
E399871
E138629
E138623
E402001
E322866
Keys and Remote Controls
Panic Alarm (If Equipped)
Press the button to sound the
panic alarm. See Sounding the
Panic Alarm (page 74).
USING THE REMOTE CONTROL
- POLICE
WARNING: Do not leave a key or
remote control unattended in the vehicle.
Children or pets could operate the power
windows, moonroof or other controls.
Failure to follow this instruction could
result in personal injury or death.
Unlock
Press the button to unlock all
doors. See Unlocking and
Locking the Doors Using the
Remote Control (page 79).
Lock
Press the button to lock all
doors. See Unlocking and
Locking the Doors Using the
Remote Control (page 79).
Releasing the Liftgate (If Equipped)
Press the button once to release
lock.
Note: Be careful when opening or closing
the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.
REMOVING THE KEY BLADE
Note: If there is a problem with the remote
entry system, make sure to take all remote
controls with you to an authorized dealer in
order to aid in troubleshooting the problem.
Push the release button on your passive
key and pull the key blade out.
73
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 78
E138624
E138623
E322866
Keys and Remote Controls
SOUNDING THE PANIC ALARM
Press the button to sound the
panic alarm. Press the button
to turn it off.
Note: The panic alarm only operates when
the ignition is off.
LOCATING YOUR VEHICLE
Note: We recommend you use this method
to locate your vehicle.
again, or switch the ignition on
Press the lock button twice
within three seconds. The turn
signal lamps flash.
CHANGING THE REMOTE
CONTROL BATTERY VEHICLES WITH: PUSH
BUTTON START, EXCLUDING:
POLICE
WARNING: Keep batteries away
from children to prevent ingestion.
Failure to follow this instruction could
result in personal injury or death. If
ingested, immediately seek medical
attention.
WARNING: If the battery
compartment does not securely close,
stop using the remote control and
replace it as soon as possible. In the
meantime, keep the remote control away
from children. Failure to follow this
instruction could result in personal injury
or death.
The remote control uses one coin-type
3-volt lithium battery CR2450 or
equivalent.
1. Push the release button and pull the
key blade out.
74
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 79
E303824
E218402
E107998
Keys and Remote Controls
2. Twist a thin coin under the tab hidden
behind the key blade head to remove
the battery cover.
3. Insert a screwdriver, and carefully
remove the battery.
4. Install a new battery with the + facing
upward.
5. Reinstall the battery housing cover
onto the transmitter and install the key
blade.
Dispose of old batteries in an
environmentally friendly way.
Seek advice from your local
authority about recycling old batteries.
Note: Do not wipe off any grease on the
battery terminals or on the back surface of
the circuit board.
Note: Replacing the battery does not erase
the programmed key from your vehicle. The
remote control should operate normally.
75
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 80
E107998
E203601
Keys and Remote Controls
CHANGING THE REMOTE
CONTROL BATTERY - POLICE
WARNING: Keep batteries away
from children to prevent ingestion.
Failure to follow this instruction could
result in personal injury or death. If
ingested, immediately seek medical
attention.
WARNING: If the battery
compartment does not securely close,
stop using the remote control and
replace it as soon as possible. In the
meantime, keep the remote control away
from children. Failure to follow this
instruction could result in personal injury
or death.
The remote control uses one coin-type
three-volt lithium battery CR2032 or
equivalent.
Make sure you dispose of old
batteries in an environmentally
friendly way. Seek advice from
local authorities about recycling old
batteries.
1. Twist a thin coin in the slot of the
remote control near the key ring to
remove the battery cover.
Note: Do not remove the rubber cover and
circuit board from the front housing of the
remote control.
Note: Do not wipe off any grease on the
battery terminals or on the back surface of
the circuit board.
2. Remove the old battery.
3. Insert the new battery. Refer to the
symbols inside the remote control for
the correct orientation of the battery.
Press the battery down to make sure
you have it fully seated in the housing.
4. Reinstall the battery housing cover
onto the remote control.
Note: Replacing the battery does not erase
the programmed key from your vehicle. The
remote control operates normally.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
76
Page 81
E151795
E312216
E269950
Keys and Remote Controls
REPLACING A LOST KEY OR
REMOTE CONTROL
You can purchase replacement keys or
remote controls from an authorized dealer.
Authorized dealers can program remote
controls for your vehicle.
Note: Your vehicle keys came with a
security label that provides important key
cut information. Keep the label in a safe
place for future reference.
PROGRAMMING THE REMOTE
CONTROL
General Information
You must have two previously
programmed remote controls inside your
vehicle and the new unprogrammed
remote controls readily accessible. Contact
an authorized dealer to have the spare
remote control programmed if two
previously programmed remotes are not
available. Make sure that your vehicle is
off before beginning this procedure. Make
sure that you close all the doors before
beginning and that they remain closed
throughout the procedure. Perform all
steps within 30 seconds of starting the
sequence. Stop and wait for at least one
minute before starting again if you perform
any steps out of sequence.
Read and understand the entire procedure
before you begin.
Note: You can program a maximum of four
remote controls to your vehicle.
Note: If your programmed remote controls
are lost or stolen and you do not have an
extra coded remote, you need to have your
vehicle towed to an authorized dealer. Store
an extra programmed remote away from
your vehicle in a safe place to help prevent
any inconvenience. Contact an authorized
dealer to purchase additional spare or
replacement remotes.
Steps for Programming Your Spare
Remote Control
Note: Your vehicle is equipped with one of
the following center consoles.
Programming Backup Location
77
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 82
Keys and Remote Controls
1. Place the first programmed remote in
the backup slot inside the cup holder
or center console with your foot off the
brake pedal, press and release the push
button ignition switch.
2. Wait five seconds and then press and
release the push button ignition switch
again.
3. Remove the remote control.
4. Within 10 seconds, place a second
programmed remote control in the
backup slot. Press and release the
push button ignition switch.
5. Wait five seconds and then press and
release the push button ignition switch
again. Keep the ignition on for at least
three seconds, but no more than 10
seconds.
6. Remove the remote control.
7. Place the unprogrammed remote
control in the backup slot and press
and release the push button ignition
switch.
Programming is now complete. With your
foot on the brake pedal, press the push
button ignition switch to verify the remote
control functions operate and your vehicle
starts with the new remote control.
If programming was not successful, wait
10 seconds and repeat Steps 1 through 7.
If you are still unsuccessful, take your
vehicle to an authorized dealer.
Sounds when you open the driver's door,
turn off the vehicle and you have left the
key in the ignition.
KEYS AND REMOTE
CONTROLS AUDIBLE
WARNINGS
Key In Reminder
Sounds when the following conditions are
met:
•Vehicle is out of park (P).
•You switch the vehicle off.
•You open the driver's door.
•You have left the key inside the vehicle.
KEYS AND REMOTE CONTROLS – TROUBLESHOOTING
KEYS AND REMOTE CONTROLS – INFORMATION MESSAGES
ActionMessage
Soon
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Replace remote control battery.Key Battery Low Replace
78
Page 83
E267112
E138629
E138629
E267111
E394891
E267112
E267111
Doors and Locks
OPERATING THE DOORS
FROM OUTSIDE YOUR
VEHICLE
UNLOCKING AND LOCKING THE
DOORS USING THE REMOTE
CONTROL
You can only use the remote control when
your vehicle is stationary.
Unlocking the Doors
Press the button to unlock all
doors. One long flash of the turn
signal lamps confirms that your
vehicle has unlocked.
One-Stage Unlocking
Press the button to unlock all
doors.
Two-Stage Unlocking (If Equipped)
Press the button to unlock the
driver's door. Press the button
again within three seconds to
unlock all doors.
Locking the Doors
Press the button to lock all
doors. One short flash of the
turn signal lamps confirms your
vehicle is locked.
A tone sounds when you press the lock
button twice within three seconds on the
remote control to confirm your vehicle is
locked.
Note: For more information on operating
the doors from outside your vehicle See
Keyless Entry (page 83).
UNLOCKING AND LOCKING THE
DOORS USING THE KEY BLADE
If there is a power door lock fault you can
use the key blade to lock and unlock the
doors.
Lock.A
Unlock.B
Release the key blade from the remote
control. See Removing the Key Blade
(page 73).
OPERATING THE DOORS
FROM INSIDE YOUR VEHICLE
UNLOCKING AND LOCKING THE
DOORS USING THE CENTRAL
LOCKING
The power door lock control is on the front
doors.
Press the button to unlock all
doors.
Press the button to lock all
doors.
Note: The central locking only operates if
the front doors are fully closed.
79
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 84
Doors and Locks
OPENING THE DOORS FROM
INSIDE YOUR VEHICLE
Pull the interior door handle twice to
unlock and open a rear door. The first pull
unlocks the door and the second pull
opens the door.
AUTOUNLOCK
WHAT IS AUTOUNLOCK
Autounlock is a feature that centrally
unlocks the vehicle doors when your
vehicle comes to a stop and you open the
driver door.
AUTOUNLOCK REQUIREMENTS
Autounlock unlocks all the doors after:
1. The vehicle speed exceeds 12 mph
(20 km/h).
2. Your vehicle comes to a stop.
3. You open the driver door.
Note: Autounlock operates for only 10
minutes after the ignition is switched off.
SWITCHING AUTOUNLOCK ON
AND OFF
1. From the settings menu, press Vehicle.
See Center Display (page 457).
2. Press Locks.
3. Switch Autounlock on or off.
AUTOLOCK
WHAT IS AUTOLOCK
Autolock is a locking feature that centrally
locks your vehicle doors when driving.
AUTOLOCK REQUIREMENTS
Autolock locks all the doors after:
1. All doors are closed and the ignition is
on.
2. Your vehicle speed exceeds 12 mph
(20 km/h).
Autolock repeats if:
1. Your vehicle is stopped.
2. Any door is opened and closed again.
3. Your vehicle speed exceeds 12 mph
(20 km/h).
MISLOCK
WHAT IS MISLOCK
Mislock is a locking feature that warns you
if your vehicle has not locked.
HOW DOES MISLOCK WORK
The horn sounds when you press the lock
button on the remote control and a door
is open.
MISLOCK LIMITATIONS
When you press the lock button once, the
direction indicators do not flash if:
•Any door or the liftgate is open.
•The hood is open.
When you press the lock button twice
within three seconds, the horn sounds if:
•Any door or the liftgate is open.
•The hood is open.
If you switch mislock off, the horn does not
sound if you press the lock button on the
remote control when a door is open.
80
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 85
E249859
Doors and Locks
SWITCHING MISLOCK ON AND
OFF
1. From the settings menu, press Vehicle.
See Center Display (page 457).
2. Press Locks.
3. Switch Mislock chirp on or off.
DOOR LOCK INDICATORS
DOORS AND LOCKS AUDIBLE
WARNINGS
Door Ajar Audible Warning
Sounds when any front door is not fully
closed and your vehicle is moving.
DOORS AND LOCKS –
TROUBLESHOOTING
An LED on the power door lock control
illuminates when all doors are locked. It
remains on for up to five minutes after you
switch the ignition off.
DOORS AND LOCKS – INFORMATION MESSAGES
Displays if a door is open. Fully close the door.Driver Door Ajar
Passenger Door Ajar
Rear Left Door Ajar
Rear Right Door Ajar
Displays if a hood is open. Fully close the hood.Hood Ajar
DOORS AND LOCKS – WARNING
LAMPS
Door Ajar Warning Lamp
Illuminates when you switch the
ignition on and remains on if any
door or the hood is open.
DetailsMessage
81
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 86
Doors and Locks
DOORS AND LOCKS –
FREQUENTLY ASKED QUESTIONS
Can accessories such as steps or
handles be used with the latch
assembly?
•Do not use the door latch assembly to
attach any accessory, such as handles
or steps, as this can cause damage to
your vehicle.
82
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 87
E248553
Keyless Entry
WHAT IS KEYLESS ENTRY
The system allows you to lock and unlock
your vehicle without taking the passive key
out of your pocket or purse.
KEYLESS ENTRY LIMITATIONS
Make sure your remote control is within 3 ft
(1 m) from the front door handles and the
liftgate.
The system could not function if:
•The remote control remains stationary
for about a minute.
•The vehicle battery has no charge.
•The remote control battery has no
charge.
•There is interference causing issues
with the remote control frequencies.
•The remote control is too close to
metal objects or electronic devices, for
example keys or a cell phone.
KEYLESS ENTRY SETTINGS
Reprogramming the Unlocking
Function (If Equipped)
You can enable the two-stage unlocking
function allowing you to unlock only the
driver door when you touch the unlock
sensor.
Press and hold both the lock and unlock
buttons on the remote control for four
seconds to disable or enable two-stage
unlocking.
If you program the unlocking function so
that only the driver door unlocks, you can
unlock all of the other doors from inside
your vehicle using the power door lock
control. You can unlock individual doors
by pulling the interior door handles on
those doors.
Key Detection Alert
Displays a message in the instrument
cluster if no valid key is detected, when you
exit your vehicle with a key, after the last
front door is closed and your keyless
vehicle is in run, indicating your vehicle is
still on. An audible alert sounds if you have
driven the vehicle and reached a speed of
16 mph (25 km/h) and the above
mentioned conditions are met.
You can switch the audible alert on or off.
1. From the settings menu, press Vehicle.
See Center Display (page 457).
2. Switch Key Detection Alert On or Off.
USING KEYLESS ENTRY
Unlocking the Doors
With your passive key within 3 ft (1 m) of
your vehicle, touch the unlock sensor on
the back of the door handle for a brief
period and then pull on the door handle to
unlock, being careful not to touch the lock
sensor at the same time or pull on the door
handle too quickly. The intelligent access
system requires a brief delay to
authenticate your intelligent access key.
83
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 88
E138632
E248554
Keyless Entry
Using the Electronic Liftgate with
Passive Key (If Equipped)
With your passive key within 3 ft (1 m) of
your vehicle, press the exterior liftgate
release button inside of the liftgate handle.
The liftgate unlocks and opens. See
Opening the Liftgate From Outside
Your Vehicle (page 88).
Locking the Doors
With your passive key within 3 ft (1 m) of
your vehicle, touch the outer door handle
lock sensor for approximately one second
to lock, being careful not to touch the
unlock sensor on the back of the door
handle at the same time. After locking, you
can immediately pull on the door handle
to confirm locking occurred without
inadvertently unlocking.
KEYLESS ENTRY –
TROUBLESHOOTING
KEYLESS ENTRY – FREQUENTLY
ASKED QUESTIONS
Why does the keyless entry system not
function?
If the system does not function it may
be limited. See Keyless EntryLimitations (page 83). If the system
still does not function use the remote
control or the key blade to lock and
unlock your vehicle.
Why can I not lock my vehicle?
If you electronically lock your vehicle
with a rear door or the liftgate open,
the system searches for a passive key
inside your vehicle after you close the
last door. If the system detects a key,
all doors unlock indicating that a key
is inside. Your vehicle locks if another
passive key is within the detection
range after you close the last door.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
84
Page 89
Easy Entry and Exit
HOW DOES EASY ENTRY AND
EXIT WORK
Easy entry and exit moves the driver seat
rearward and the steering column up when
you switch the ignition off. The driver seat
and steering column return to their
previous positions when you switch the
ignition on.
Note: Depending on your vehicle, the
column may move up and in.
SWITCHING EASY ENTRY AND
EXIT ON AND OFF
1. From the settings menu, press Vehicle.
See Center Display (page 457).
2. Press Easy Entry/Exit.
If you press any adjustment or memory
button when in easy exit mode, the system
cancels the operation.
85
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 90
E138632
Liftgate - Police
OPENING THE LIFTGATE
OPENING THE LIFTGATE FROM
INSIDE YOUR VEHICLE
Using the Over Head Console
Press the button on the overhead console
to unlock the liftgate. The liftgate unlocks
for 45 seconds, during which time you can
open the liftgate using the outside control
button.
Note: The liftgate icon illuminates when
the lock is released.
Note: The vehicle must be in the run
position to access this feature.
Using the Central Locking (If Equipped)
You can lock and unlock the liftgate using
the central locking, See Unlocking and
Locking the Doors Using the Central
Locking (page 79).
Note: Be careful when opening or closing
the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.
Note: Do not hang anything, for example
a bike rack, from the glass or liftgate. This
could damage the liftgate and its
components.
Note: Do not leave the liftgate open when
you are driving. This could damage the
liftgate and its components.
OPENING THE LIFTGATE FROM
OUTSIDE YOUR VEHICLE
Press the control button to unlatch the
liftgate and lift to open.
Note: Be careful when opening or closing
the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.
Note: Do not hang anything, for example
a bike rack, from the glass or liftgate. This
could damage the liftgate and its
components.
Note: Do not leave the liftgate open while
driving. This could damage the liftgate and
its components.
You can lock and unlock the liftgate using
the key blade. See Unlocking and
Locking the Doors Using the Key Blade
(page 79).
OPENING THE LIFTGATE USING
THE REMOTE CONTROL
Using Remote Control Trunk
Button (If Equipped)
Press the button to unlock the
liftgate. The liftgate unlocks for
45 seconds, during which time
you can open the liftgate using the outside
control button.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
86
Page 91
E252964
Liftgate - Police
Note: The vehicle must be in the run
position to access this feature.
To lock and unlock the liftgate, See
Unlocking and Locking the Doors Using
the Remote Control (page 79).
Note: Be careful when opening or closing
the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.
Note: Do not hang anything, for example
a bike rack, from the glass or liftgate. This
could damage the liftgate and its
components.
CLOSING THE LIFTGATE
CLOSING THE LIFTGATE FROM
OUTSIDE YOUR VEHICLE
WARNING: It is extremely
dangerous to ride in a cargo area, inside
or outside of a vehicle. In a crash, people
riding in these areas are more likely to be
seriously injured or killed. Do not allow
people to ride in any area of your vehicle
that is not equipped with seats and
seatbelts. Make sure everyone in your
vehicle is in a seat and properly using a
seatbelt. Failure to follow this warning
could result in serious personal injury or
death.
A handle is inside the liftgate to help with
closing.
Note: Make sure that you fully close the
liftgate to prevent cargo from falling out.
You can lock and unlock the liftgate using
the key blade. See Unlocking and
Locking the Doors Using the Key Blade
(page 79).
WARNING: Make sure that you fully
close the liftgate to prevent exhaust
fumes from entering your vehicle. If you
are unable to fully close the liftgate,
open the air vents or the windows to
allow fresh air to enter your vehicle.
Failure to follow this instruction could
result in personal injury or death.
87
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 92
E138633
E138632
Liftgate
LIFTGATE PRECAUTIONS
WARNING: Make sure all persons
are clear of the power liftgate area
before opening or closing the liftgate.
WARNING: It is extremely
dangerous to ride in a cargo area, inside
or outside of a vehicle. In a crash, people
riding in these areas are more likely to be
seriously injured or killed. Do not allow
people to ride in any area of your vehicle
that is not equipped with seats and
seatbelts. Make sure everyone in your
vehicle is in a seat and properly using a
seatbelt. Failure to follow this warning
could result in serious personal injury or
death.
WARNING: Make sure that you fully
close the liftgate to prevent exhaust
fumes from entering your vehicle. If you
are unable to fully close the liftgate,
open the air vents or the windows to
allow fresh air to enter your vehicle.
result in personal injury or death.
WARNING: Keep keys out of reach
of children. Do not allow children to
operate or play near an open or moving
power liftgate. You should supervise the
operation of the power liftgate at all
times.
Using the Instrument Panel Button
With the transmission in park
(P), press the button on the
instrument panel.
Note: Be careful when opening or closing
the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.
Note: Do not hang anything, for example
a bike rack, from the glass or liftgate. This
could damage the liftgate and its
components.
Note: Do not leave the liftgate open when
you are driving. This could damage the
liftgate and its components.
OPENING THE LIFTGATE FROM
OUTSIDE YOUR VEHICLE
1. Unlock the liftgate with the remote
control or power door unlock control.
If a remote control is within 3 ft (1 m)
of the liftgate, the liftgate unlocks
when you press the liftgate release
button.
OPENING THE LIFTGATE
OPENING THE LIFTGATE FROM
INSIDE YOUR VEHICLE
Using the Touchscreen
With the transmission in park (P), access
the liftgate switch on the touchscreen
under vehicle settings.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
2. Press and release the liftgate control
button.
88
Page 93
E267940
Liftgate
Note: Allow the power system to open the
liftgate. Manually pushing or pulling the
liftgate may activate the system’s obstacle
detection feature and stop the power
operation or reverse its direction, replicate
a strut failure, or damage mechanical
components.
Note: Be careful when opening or closing
the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.
Note: Do not hang anything, for example
a bike rack, from the glass or liftgate. This
could damage the liftgate and its
components.
Note: Do not leave the liftgate open while
driving. This could damage the liftgate and
its components.
Switching the Power Liftgate On
or Off
You can switch the power liftgate on or off
through the vehicle settings in your
instrument cluster.
Note: Depending on your region or vehicle
type the vehicle settings may be located on
your touchscreen.
When switched off, the liftgate only
unlatches and will not power open or close.
OPENING THE LIFTGATE USING
THE REMOTE CONTROL
Press the button twice within
three seconds.
Note: Do not leave the liftgate open while
driving. This could damage the liftgate and
its components.
SETTING THE LIFTGATE
OPENING HEIGHT (IF EQUIPPED)
1. Open the liftgate.
2. Stop the liftgate movement by pressing
the control button on the liftgate when
it reaches the desired height.
Note: Once the liftgate stops moving, you
can manually move it to the desired height.
3. Press and hold the control button on
the liftgate until a tone sounds,
indicating programming is complete.
Note: You can only use the liftgate control
button to program the height.
Note: You cannot program the height if the
liftgate position is too low.
4. The power liftgate now opens at the
programmed height. To change the
programmed height, repeat the steps.
Note: You can fully open the liftgate by
manually pushing it upward to the
maximum open position if it opens in a
lower position.
Note: The system recalls the new
programmed height until you reprogram it,
even if you disconnect the battery.
CLOSING THE LIFTGATE
Note: Be careful when opening or closing
the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.
Note: Do not hang anything, for example a
bike rack, from the glass or liftgate. This
could damage the liftgate and its
components.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
CLOSING THE LIFTGATE FROM
INSIDE YOUR VEHICLE
WARNING: Make sure all persons
are clear of the power liftgate area
before opening or closing the liftgate.
89
Page 94
E138633
E138636
E267940
Liftgate
Press the button on the
instrument panel.
Note: Make sure that you shift the
transmission into park (P) for automatic
transmission or completely stop the vehicle
for manual transmission.
Note: Make sure that you close the liftgate
before operating or moving your vehicle,
especially in an enclosure like a garage or a
parking structure. This could damage the
liftgate and its components.
Note: Make sure the area behind your
vehicle is free from obstruction and that
there is enough room for you to operate the
liftgate. Objects too close to your vehicle,
for example a wall, garage door or another
vehicle may come into contact with the
moving liftgate. This could damage the
liftgate and its components.
Note: Make sure that you fully close the
liftgate to prevent cargo from falling out.
CLOSING THE LIFTGATE FROM
OUTSIDE YOUR VEHICLE
WARNING: Make sure all persons
are clear of the power liftgate area
before opening or closing the liftgate.
Note: Make sure that you close the liftgate
before operating or moving your vehicle,
especially in an enclosure like a garage or a
parking structure. This could damage the
liftgate and its components.
Note: Make sure the area behind your
vehicle is free from obstruction and that
there is enough room for you to operate the
liftgate. Objects too close to your vehicle,
for example a wall, garage door or another
vehicle may come into contact with the
moving liftgate. This could damage the
liftgate and its components.
Note: Make sure that you fully close the
liftgate to prevent cargo from falling out.
CLOSING THE LIFTGATE USING
THE REMOTE CONTROL
WARNING: Make sure all persons
are clear of the power liftgate area
before opening or closing the liftgate.
Press the button twice within
three seconds. A tone sounds
when the liftgate begins to close.
Note: Make sure that you close the liftgate
before operating or moving your vehicle,
especially in an enclosure like a garage or a
parking structure. This could damage the
liftgate and its components.
Note: Make sure the area behind your
vehicle is free from obstruction and that
there is enough room for you to operate the
liftgate. This could damage the liftgate and
its components.
Note: Make sure that you fully close the
liftgate to prevent cargo from falling out.
Press the liftgate button.
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
90
Page 95
E162453
Liftgate
STOPPING THE LIFTGATE
MOVEMENT
Note: Do not apply sudden excessive force
to the liftgate while it is in motion. This
could damage the power liftgate and its
components.
Note: Selections vary depending on region
or options.
You can stop the liftgate movement by
doing any of the following:
•Pressing the liftgate control button on
the liftgate.
•Pressing the liftgate control button
inside the vehicle.
•Pressing the liftgate button on the
remote control twice.
•Pressing the liftgate button on an
authorized device.
LIFTGATE OBSTACLE
DETECTION
Closing the Liftgate
The system stops when it detects an
obstacle. A tone sounds and the system
reverses to open. Once you remove the
obstacle, you can power close the liftgate.
Note: To prevent accidental obstacle
detection, let the power liftgate close
completely before you enter your vehicle.
Opening the Liftgate
The system stops when it detects an
obstacle and a tone sounds. Once you
remove the obstacle, you can continue to
operate the liftgate.
LIFTGATE –
TROUBLESHOOTING
LIFTGATE – WARNING LAMPS
LIFTGATE – INFORMATION MESSAGES
Illuminates when the liftgate is
not completely closed.
ActionMessage
The liftgate is not completely closed. Close the liftgate.Liftgate Ajar
91
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 96
Liftgate
LIFTGATE – FREQUENTLY ASKED
QUESTIONS
Why won't my power liftgate
function?
•It can happen in freezing conditions or
when parking on downhill slopes.
•Make sure the power liftgate is enabled
in the vehicle settings menu.
•Make sure the transmission is in park
(P), ensure nothing is obstructing the
liftgate path and there is not excessive
weight on the liftgate.
•If there are continued issues, the
battery voltage may be low or there
may be other system issues. See an
authorized dealer.
92
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 97
Security
PASSIVE ANTI-THEFT
SYSTEM
WHAT IS THE PASSIVE ANTITHEFT SYSTEM
The passive anti-theft system prevents
someone from starting your vehicle with
an incorrectly coded key.
Note: Do not leave a duplicate coded key
in your vehicle. Always take the keys and
lock all the doors when leaving your vehicle.
HOW DOES THE PASSIVE ANTITHEFT SYSTEM WORK
The passive anti-theft system arms when
you switch your vehicle off.
It disarms when you switch your vehicle on
with a correctly coded key.
Note: The system is not compatible with
non-Ford aftermarket remote start systems.
Note: Do not leave a duplicate coded key
in your vehicle. Always take the keys and
lock all doors when leaving your vehicle.
ANTI-THEFT ALARM SYSTEM
WHAT IS THE ANTI-THEFT ALARM
SYSTEM
The anti-theft alarm system warns you of
an unauthorized entry to your vehicle.
HOW DOES THE ANTI-THEFT
ALARM SYSTEM WORK
When armed, the anti-theft alarm is
triggered in any of the following ways:
•Opening a door, the tailgate or hood
without a correctly coded key or
remote control.
•If you turn the power on without a
correctly coded key.
•Disconnecting the battery.
Any further attempts to carry out one of
the above, sounds the alarm again.
If the anti-theft alarm is triggered, the
alarm horn sounds for 30 seconds and the
turn signals flash for five minutes.
WHAT IS THE PERIMETER ALARM
- EXCLUDING: POLICE
The perimeter alarm is designed to detect
unauthorized access to your vehicle.
ARMING THE ANTI-THEFT ALARM
SYSTEM
The alarm is ready to arm when you switch
your vehicle off.
Lock your vehicle with your remote control
to arm the alarm.
DISARMING THE ANTI-THEFT
ALARM SYSTEM
Disarm the alarm by performing any of the
following actions:
•Unlock the doors or luggage
compartment with the remote control.
•Switch your vehicle on or start your
vehicle.
93
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 98
E298029
E405502
E405502
Security
USING THE POLICE
PERIMETER ALERT SYSTEM POLICE
The system monitors moving pedestrians
and detects objects such as vehicles and
bicycles. The system does not function if
the ignition is off, transmission is not in
park (P) or when any door is open. It uses
sensors near the rear bumper of the vehicle
to detect and monitor moving objects near
your vehicle.
Detected moving objects appear as moving
dots on the radar map displayed on the
instrument cluster display. The dots turn
red if the system identifies a potential
threat.
Once the approaching objects cross the
selected range perimeter, an alert tone
sounds, the rear view camera may show
potential threats on the center display and
the system may roll up the windows and
lock the doors depending on the range
mode selected.
Switching the Police Perimeter
Alert On and Off
Press the button on the center
console to manually switch the
system on and off.
The system automatically switches off if
you:
•Shift your vehicle out of park (P).
•Switch your vehicle off.
•Open a door.
Police Perimeter Alert Indicator
When the system is active, an
indicator illuminates on the
instrument cluster display. See
Instrument Cluster Indicators (page
128).
Police Perimeter Alert Settings
The system has three mode settings that
control the range: Low, Medium or High. A
highlighted ring on the radar map with the
setting label appear on the instrument
cluster display to indicate the selected
range mode.
The default setting is Medium. The system
defaults to this mode every time you
switch your vehicle off.
Note: If you restart your vehicle before the
system completely shuts down, the previous
mode setting may be retained.
Switching the Police Perimeter
Alert Modes
You can change the perimeter alert mode
either though the steering wheel buttons
while the system is active or through the
vehicle settings menu when the system is
inactive. See Using the InstrumentCluster Display Controls (page 131).
When the system is active, you can change
the mode setting when the perimeter alert
screen is displayed on the instrument
cluster display by pressing the up or down
buttons on the steering wheel.
When the system is inactive,
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
94
Page 99
E423895
E298030
Security
1. Press the menu button on the steering
wheel to enter the instrument cluster
display main menu.
2. Using the instrument cluster controls
on the steering wheel, select Settings.
3. Select Vehicle Settings.
4. Select the desired perimeter alert
mode setting.
5. Press the OK button.
Automatic Operation of Windows
or Door Locks
When windows or door locking
function is active, corresponding
indicators appear on the
instrument cluster display.
The windows and door locking functions
are not available when Low mode is
selected or Police Idle is active.
When Dark Car mode is active, the radar
map in the instrument cluster display
switches off.
Object Detection
The system uses sensors located near the
rear bumper on both sides of your vehicle.
The sensors perform best when you park
your vehicle in an open area without large
obstructions or walls nearby.
Note: The system may not detect fast
vehicles, stationary objects and small
objects such as birds.
Note: The system may not detect a
pedestrian who is near a large obstruction
such as a vehicle or a wall until the
pedestrian moves away from the
obstruction.
Note: Sensor reflections from stationary
objects may cause false objects to briefly
appear on the Police Perimeter Alert System
display.
Note: Sensor obstructions such as dirt,
mud, precipitation, repair compound,
stickers, graphics, bumper guards, trailers,
bicycle racks or cargo racks in front of the
sensors can cause system sensing
degradation.
System Error
If a police perimeter alert system fault
occurs, a warning message appears on the
instrument cluster display. Have the
system checked as soon as possible.
If the system does not activate, have the
system checked for its configurations as
soon as possible.
95
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Page 100
Security
SECURITY – TROUBLESHOOTING
SECURITY – INFORMATION MESSAGES
The system has not detected a correctly coded key.No Key Detected
Starting System Fault
Vehicle Alarm To Stop
Alarm, Start Vehicle.
Alarm
The system has malfunctioned. Have your vehicle checked
as soon as possible.
Displays when the alarm has been triggered due to unauthorized entry.
DetailsMessage
96
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.