FORD Explorer 2005 User Manual v.1

Download

Page 1

Introduction 4

Instrument Cluster 10

Warning and control lights 10 Gauges 15

Entertainment Systems 18

AM/FM stereo with CD 18 AM/FM stereo with in-dash six CD 21 AM/FM stereo cassette with CD 25

Climate Controls 46

Manual heating and air conditioning 46 Electronic automatic temperature control 48 Rear passenger climate control 50 Rear window defroster 52

Table of Contents

Lights 53

Driver Controls 62

Windshield wiper/washer control 62 Steering wheel adjustment 63 Power windows 68 Mirrors 69 Speed control 71 Message center 83

Locks and Security 99

Keys 99 Locks 99 Anti-theft system 101

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 2

Table of Contents

Seating and Safety Restraints 112

Seating 112 Safety restraints 122 Air bags 135 Child restraints 143

Tires, Wheels and Loading 156

Tire Information 159 Tire Inflation 160 Changing tires 164 Lug Nut Torque 172 Tire Pressure Monitoring System (TPMS) 182 Vehicle loading 187 Trailer towing 193 Recreational towing 198

Driving 200

Starting 200 Brakes 203 Traction control/AdvanceTrac 206 Transmission operation 210

Roadside Emergencies 233

Getting roadside assistance 233 Hazard flasher switch 234 Fuel pump shut-off switch 234 Fuses and relays 235 Jump starting 246 Wrecker towing 251

Customer Assistance 253

Reporting safety defects (U.S. only) 261

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 3

Table of Contents

Cleaning 262

Maintenance and Specifications 268

Engine compartment 270 Engine oil 273 Battery 278 Fuel information 286 Air filter(s) 299 Part numbers 301 Refill capacities 302 Lubricant specifications 304

Accessories 310

Index 313

All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company. Ford may change the contents without notice and without incurring obligation.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 4

Introduction

CALIFORNIA Proposition 65 Warning

WARNING: Engine exhaust, some of its constituents, and

certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

CONGRATULATIONS

Congratulations on acquiring your new Ford. Please take the time to get well acquainted with your vehicle by reading this handbook. The more you know and understand about your vehicle, the greater the safety and pleasure you will derive from driving it.

For more information on Ford Motor Company and its products visit the following website:

• In the United States: www.ford.com

• In Canada: www.ford.ca

• In Australia: www.ford.com.au

• In Mexico: www.ford.com.mx

Additional owner information is given in separate publications. This Owner’s Guide describes every option and model variant available

and therefore some of the items covered may not apply to your particular vehicle. Furthermore, due to printing cycles it may describe options before they are generally available.

Remember to pass on this Owner’s Guide when reselling the vehicle. It is an integral part of the vehicle.

Fuel pump shut-off switch: In the event of an accident the

safety switch will automatically cut off the fuel supply to the engine. The switch can also be activated through sudden vibration (e.g. collision when parking). To reset the switch, refer to the Fuel pump shut-off switch in the Roadside Emergencies chapter.

SAFETY AND ENVIRONMENT PROTECTION

Warning symbols in this guide

How can you reduce the risk of personal injury to yourself or others? In this guide, answers to such questions are contained in comments highlighted by the warning triangle symbol. These comments should be read and observed.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 5

Introduction

Warning symbols on your vehicle

When you see this symbol, it is imperative that you consult the relevant section of this guide before touching or attempting adjustment of any kind.

Protecting the environment

We must all play our part in protecting the environment. Correct vehicle usage and the authorized disposal of waste, cleaning and lubrication materials are significant steps towards this aim. Information in this respect is highlighted in this guide with the tree symbol.

BREAKING-IN YOUR VEHICLE

Your vehicle does not need an extensive break-in. Try not to drive continuously at the same speed for the first 1,000 miles (1,600 km) of new vehicle operation. Vary your speed frequently in order to give the moving parts a chance to break in.

Drive your new vehicle at least 500 miles (800 km) before towing a trailer.

Do not add friction modifier compounds or special break-in oils during the first few thousand miles (kilometers) of operation, since these additives may prevent piston ring seating. See Engine oil in the Maintenance and Specifications chapter for more information on oil usage.

SPECIAL NOTICES

Emission warranty

The New Vehicle Limited Warranty includes Bumper-to-Bumper Coverage, Safety Restraint Coverage, Corrosion Coverage, and 6.0L Power Stroke Diesel Engine Coverage. In addition, your vehicle is eligible for Emissions Defect and Emissions Performance Warranties. For a detailed description of what is covered and what is not covered, refer to the Warranty Guide that is provided to you along with your Owner’s Guide.

Special instructions

For your added safety, your vehicle is fitted with sophisticated electronic controls.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 6

Introduction

Please read the section Supplemental restraint system (SRS)

in the Seating and Safety Restraints chapter. Failure to follow the specific warnings and instructions could result in personal injury.

Front seat mounted rear-facing child or infant seats should

NEVER be placed in front of an active passenger air bag.

Service Data Recording

Service data recorders in your vehicle are capable of collecting and storing diagnostic information about your vehicle. This potentially includes information about the performance or status of various systems and modules in the vehicle, such as engine, throttle, steering or brake systems. In order to properly diagnose and service your vehicle, Ford Motor Company, Ford of Canada, and service and repair facilities may access vehicle diagnostic information through a direct connection to your vehicle when diagnosing or servicing your vehicle.

Event Data Recording

Other modules in your vehicle — event data recorders — are capable of collecting and storing data during a crash or near crash event. The recorded information may assist in the investigation of such an event. The modules may record information about both the vehicle and the occupants, potentially including information such as:

• how various systems in your vehicle were operating;

• whether or not the driver and passenger seatbelts were buckled;

• how far (if at all) the driver was depressing the accelerator and/or the

brake pedal;

• how fast the vehicle was traveling; and

• where the driver was positioning the steering wheel.

To access this information, special equipment must be directly connected to the recording modules. Ford Motor Company and Ford of Canada do not access event data recorder information without obtaining consent, unless pursuant to court order or where required by law enforcement, other government authorities or other third parties acting with lawful authority. Other parties may seek to access the information independently of Ford Motor Company and Ford of Canada.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 7

Introduction

Notice to owners of pickup trucks and utility type vehicles

Utility vehicles have a significantly higher rollover rate than

other types of vehicles.

Before you drive your vehicle, please read this Owner’s Guide carefully. Your vehicle is not a passenger car. As with other vehicles of this type, failure to operate this vehicle correctly may result in loss of vehicle control, vehicle rollover, personal injury or death.

Be sure to read Driving off road in the Driving chapter.

Using your vehicle with a snowplow

Do not use this vehicle for snowplowing.

Your vehicle is not equipped with a snowplowing package.

Using your vehicle as an ambulance

Do not use this vehicle as an ambulance.

Your vehicle is not equipped with the Ford Ambulance Preparation Package.

MIDDLE EAST/NORTH AFRICA VEHICLE SPECIFIC INFORMATION

For your particular global region, your vehicle may be equipped with features and options that are different from the ones that are described in this Owner’s Guide; therefore, a supplement has been supplied that complements this book. By referring to the pages in the provided supplement, you can properly identify those features, recommendations and specifications that are unique to your vehicle. Refer to this

Owner’s Guide for all other required information and warnings.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 8

Introduction

These are some of the symbols you may see on your vehicle.

Vehicle Symbol Glossary

Safety Alert

Fasten Safety Belt Air Bag-Front

Air Bag-Side Child Seat

Child Seat Installation Warning

Child Seat Tether Anchor

Anti-Lock Brake System

Powertrain Malfunction Speed Control

Master Lighting Switch Hazard Warning Flasher

Fog Lamps-Front Fuse Compartment

See Owner’s Guide

Child Seat Lower Anchor

Brake System

Brake Fluid Non-Petroleum Based

Fuel Pump Reset Windshield Wash/Wipe

Windshield Defrost/Demist

Rear Window Defrost/Demist

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 9

Vehicle Symbol Glossary

Introduction

Power Windows Front/Rear

Child Safety Door Lock/Unlock

Power Window Lockout

Interior Luggage Compartment Release Symbol

Panic Alarm Engine Oil

Engine Coolant

Engine Coolant Temperature

Do Not Open When Hot Battery

Avoid Smoking, Flames, or Sparks

Battery Acid

Explosive Gas Fan Warning

Power Steering Fluid

Maintain Correct Fluid Level

Emission System Engine Air Filter

MAX

MIN

Passenger Compartment Air Filter

Jack

Check fuel cap Low tire warning

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 10

Instrument Cluster

WARNING LIGHTS AND CHIMES

Standard instrument cluster

Optional instrument cluster

Warning lights and gauges can alert you to a vehicle condition that may become serious enough to cause expensive repairs. A warning light may illuminate when a problem exists with one of your vehicle’s functions. Many lights will illuminate when you start your vehicle to make sure the bulb works. If any light remains on after starting the vehicle, have the respective system inspected immediately.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 11

Instrument Cluster

Service engine soon: The Service engine soon indicator light

illuminates when the ignition is first turned to the ON position to check the bulb. Solid illumination after the engine is started indicates the On Board Diagnostics System (OBD-II) has detected a malfunction. Refer to On board diagnostics (OBD-II) in the Maintenance and Specifications chapter. If the light is blinking, engine misfire is occurring which could damage your catalytic converter. Drive in a moderate fashion (avoid heavy acceleration and deceleration) and have your vehicle serviced immediately.

Under engine misfire conditions, excessive exhaust temperatures

could damage the catalytic converter, the fuel system, interior floor coverings or other vehicle components, possibly causing a fire.

Check fuel cap (if equipped):

Illuminates when the fuel cap may not be properly installed. Continued driving with this light on may cause the Service engine soon light to come on, refer to Fuel filler cap in the Maintenance and Specifications chapter.

Brake system warning light: To confirm the brake system warning light is functional, it will momentarily illuminate when the ignition is turned to the ON position when the engine is not running, or in a position between ON and START, or by applying the parking brake when the ignition is turned to the ON position. If the brake system warning light does not illuminate at this time, seek service immediately from your dealership. Illumination after releasing the parking brake indicates low brake fluid level and the brake system should be inspected immediately by your servicing dealership.

SERVICE

ENGINE

SOON

CHECK

FUEL

CAP

Driving a vehicle with the brake system warning light on is

dangerous. A significant decrease in braking performance may occur. It will take you longer to stop the vehicle. Have the vehicle checked by your dealer immediately.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 12

Instrument Cluster

Anti-lock brake system: If the ABS light stays illuminated or continues to flash, a malfunction has been detected, have the system serviced immediately. Normal braking is still functional unless the brake warning light also is illuminated.

Air bag readiness: If this light fails to illuminate when ignition is turned to ON, continues to flash or remains on, have the system serviced immediately. A chime will also sound when a malfunction in the supplemental restraint system has been detected.

Safety belt: Reminds you to fasten your safety belt. A chime will also sound to remind you to fasten your safety belt.

Charging system: Illuminates when the battery is not charging properly.

ABS

Check gage (if equipped):

Illuminates when any of the following conditions has occurred:

• The engine coolant temperature is high.

• The engine oil pressure is low.

• The fuel gauge is at or near empty.

Hi temp low oil (if equipped):

Illuminates when the engine coolant temperature is high or the engine oil pressure is low. Refer to Engine

coolant temperature gauge or Engine oil pressure gauge in this chapter.

CHECK

GAGE

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 13

Instrument Cluster

Low tire warning (if equipped with the Tire Pressure Monitoring System): Illuminates

when your tire pressure is low. If the light remains on at start up or while driving, the tire pressure should be checked. Refer to Inspecting and Inflating Your Tires in the Tires, Wheels and Loading chapter. When the ignition is first turned to ON, the light will illuminate for 3 seconds to ensure the bulb is working. If the light does not turn ON, have the system inspected by your servicing dealership. For more information on this system, refer to Understanding Your Tire Pressure Monitoring System in the Tires, Wheels and Loading chapter.

Electronic throttle control:

Illuminates when the engine has defaulted to a ’limp-home’ operation. Report the fault to a dealer at the earliest opportunity.

Door ajar (if equipped):

Illuminates when the ignition is in the ON position and any door is open.

DOOR

AJAR

Overdrive off: Illuminates when the overdrive function of the transmission has been turned off, refer to the Driving chapter. If the light flashes steadily or does not illuminate, have the transmission serviced soon, or damage may occur.

AdvanceTrac娂 (if equipped):

Illuminates when the AdvanceTrac娂 system is active. If the light remains on, have the system serviced immediately.

Four wheel drive low (if equipped): Illuminates when

four-wheel drive low is engaged.

O/D

OFF

4x4

LOW

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 14

Instrument Cluster

Four wheel drive high (if equipped): Illuminates when

four-wheel drive high is engaged.

Speed control: Illuminates when the speed control is activated. Turns off when the speed control system is deactivated.

Turn signal: Illuminates when the left or right turn signal or the hazard lights are turned on. If the indicators stay on or flash faster, check for a burned out bulb.

High beams: Illuminates when the high beam headlamps are turned on.

Key-in-ignition warning chime: Sounds when the key is left in the ignition in the OFF/LOCK or ACCESSORY position and the driver’s door is opened.

Headlamps on warning chime: Sounds when the headlamps or parking lamps are on, the ignition is off (the key is not in the ignition) and the driver’s door is opened.

Turn signal warning chime: Sounds when the turn signal lever has been activated to signal a turn and not turned off after the vehicle is driven more than 1/2 mile (0.8 km).

4x4

HIGH

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 15

GAUGES

Standard instrument cluster gauges

Optional instrument cluster gauges

Instrument Cluster

Speedometer: Indicates the current vehicle speed.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 16

Instrument Cluster

Engine coolant temperature gauge: Indicates engine coolant

temperature. At normal operating temperature, the needle will be in the normal range (between “H” and “C”). If it enters the red section, the engine is overheating. Stop the vehicle as soon as safely possible, switch off the engine and let the engine cool.

Never remove the coolant reservoir cap while the engine is running or hot.

Odometer: Registers the total miles (kilometers) of the vehicle.

• Standard instrument cluster

• Optional instrument cluster

Refer to Message Center in the Drivers Controls chapter on how to switch the display from Metric to English.

Trip odometer: Registers the miles (kilometers) of individual journeys.

• Standard instrument cluster

Press and release the SELECT/RESET button to toggle between odometer and trip odometer display.

• Optional instrument cluster

Press and release the TRIP/RESET button to toggle between odometer and trip odometer display.

TRIP

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 17

Instrument Cluster

Tachometer: Indicates the engine speed in revolutions per minute. Driving with your tachometer pointer continuously at the top of the scale may damage the engine.

Battery voltage gauge: Indicates the battery voltage when the ignition is in the ON position. If the pointer moves and stays outside the normal operating range (as indicated by arrows), have the vehicle’s electrical system checked as soon as possible.

Engine oil pressure gauge:

Indicates engine oil pressure. The needle should stay in the normal operating range (between “L” and “H”). If the needle falls below the normal range, stop the vehicle, turn off the engine and check the engine oil level. Add oil if needed. If the oil level is correct, have your vehicle checked at your dealership or by a qualified technician.

Fuel gauge: Indicates approximately how much fuel is left in the fuel tank (when the ignition is in the ON position). The fuel gauge may vary slightly when the vehicle is in motion or on a grade.

The arrow next to the fuel pump icon indicates which side of the vehicle the fuel filler door is located.

Refer to Filling the tank in the Maintenance and Specifications chapter for more information.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 18

Entertainment Systems

AM/FM STEREO / SINGLE CD RADIO (IF EQUIPPED)

VOL - PUSH ON

SEEK

TUNE

16 17

AM FM

BASSCDTREB BAL FADE

CDCD

123456

1. Balance: Press

sound to the left/right speakers.

2. Fade: Press

sound to the front/rear speakers.

/ to shift

FM1

DISC

1 234

COMP

SHUFFLE

7910

SCN

CLK

3. SCN (Scan): Press to hear a

brief sampling of all listenable stations or CD tracks. Press again to stop.

4. CLK: To set the hour, press and

hold CLK and press SEEK to decrease

or increase the

CLK

hours.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 19

Entertainment Systems

To set the minute, press and hold CLK and press TUNE to decrease or increase the minutes.

5. EJ (eject): Press to eject a CD.

6. COMP (Compression): In CD

mode, press to bring louder and softer levels into more comfortable listening level. The compression icon (c) will appear in the display.

7. Shuffle: Press to listen to the

tracks on the CD in random order. Press again to turn off.

8. Memory presets: To set a

station: Select frequency band

CDCD

123456

AM/FM; tune to a station. Press and hold a preset button until sound returns. This radio is equipped with six station memory preset controls which allow you to set up to six AM stations and 12 FM stations (six in FM1 and six in FM2).

9. CD:

Press and hold until desired point of a selection is reached.

10.

CD: Press and hold until

desired point of a selection is reached.

11. Tune: In radio mode, press to move up or down the frequency band in individual increments.

12. Seek: Press and release SEEK

/ for previous/next

strong station, selection or track.

13. Power/volume: Press to turn ON/OFF; turn to increase or decrease volume levels.

SHUFFLE

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 20

Entertainment Systems

14. CD: Press to enter CD mode or to play a CD already loaded into the system.

15. AM/FM: Press to choose a frequency band in radio mode.

16. Bass: Press increase/decrease the bass output.

17. Treble: Press increase/decrease the treble output.

18. CD slot: Insert a CD printed side up.

CD units are designed to play commercially pressed 4.75 in (12 cm) audio compact discs only. Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Irregular shaped CDs, CDs with a scratch protection film attached, and CDs with homemade paper (adhesive) labels should not be inserted into the CD player. The label may peel and cause the CD to become jammed. It is recommended that homemade CDs be identified with permanent felt tip marker rather than adhesive labels. Ballpoint pens may damage CDs. Please contact your dealer for further information.

/ to

DISC

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 21

Entertainment Systems

AUDIOPHILE SATELLITE COMPATIBLE AM/FM STEREO IN-DASH SIX CD RADIO (IF EQUIPPED)

1. Seek: Press and release SEEK strong station or track.

2. Rewind: In CD mode, press until the desired point within the current selection is reached.

Fast forward: In CD mode, press until the desired point within the current selection is reached.

TEXT: TEXT is only available when equipped with Satellite radio. Your Audiophile radio comes equipped with Satellite ready capability. The kit to enable Satellite reception is available through your Ford dealer. Detailed Satellite instructions are included with the dealer installed kit.

Dealer installed satellite kit only available in the continental United States.

3. DSP (Digital Signal Processing): Press DSP to access

the Ambiance menu. Ambiance gives the feeling of “being there” to your music, creating increased clarity as well as an open and spacious feel to the music. Press SEL to engage/disengage. Turn the volume control to increase/decrease the level of ambiance.

/ for previous/next

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 22

Entertainment Systems

Occupancy: Press DSP again to change the occupancy mode to optimize sound for ALL SEATS, DRIVERS SEAT or REAR SEATS. Press SEL to scroll through settings.

4. Mute: Press to MUTE playing media; press again to return to playing media

5. Eject: Press to eject a CD. Press EJ and a memory preset to eject a specific disk. Press and hold to eject all loaded discs.

6. Bass: Press BASS; then press SEL the bass output.

Treble: Press TREB; then press SEL the treble output.

7. Select: Use with Bass, Treble, Balance, Fade and other menu selections.

8. Balance: Press BAL; then press SEL left/right speakers.

Fade: Press FADE; then press SEL rear/front speakers.

9. Menu: Press MENU to access clock mode, RDS on/off, Traffic announcement mode, Program type mode, Shuffle and Compression mode.

The Federal Communications Commission (FCC) and the Canadian Radio and Telecommunications Commission (CRTC) recommend that FM radio broadcasters use RDS technology to transmit information. FM radio stations are independently operated and individually elect to use RDS technology to transmit station ID and program type as desired.

/ to decrease/increase

/ to shift sound to the

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 23

Entertainment Systems

Traffic: Allows you to hear traffic broadcasts. With the feature ON, press SEEK or SCAN to find a station broadcasting a traffic report (if it is broadcasting RDS data). Traffic information is not available in most U.S. markets.

FIND Program type: Allows you to search RDS-equipped stations for a certain category of music format: Classic, Country, Info, Jazz, Oldies, R&B, Religious, Rock, Soft, Top 40. Press MENU until FIND appears in the display. Use SEL to scroll through music types. Press SEEK or SCAN to search for station playing requested music category.

Show TYPE: Displays the station’s call letters or music format. Press MENU until SHOW appears in the display. Use SEL to select NONE, NAME or TYPE.

Shuffle: In CD mode, press to play tracks in a random order. Press MENU until SHUFFLE appears in the display. Use SEL to select SHUFFLE DISC, SHUFFLE TRK or SHUFFLE OFF.

Compression: In CD mode, brings soft and loud CD passages together for a more consistent listening level. Press MENU until COMPRESS is displayed. Press the SEL control to enable the compression feature when COMPRESS OFF is displayed. Press the SEL control again to disable the feature when COMPRESS ON is displayed.

Setting the clock: Press MENU until SELECT HOUR or SELECT MINS is displayed. Use SEL to manually increase ( hours/minutes. Press MENU again to disengage clock mode.

10. Memory presets: To set a station: Select frequency band AM/FM; tune to a station, press and hold a preset button until sound returns.

11. SAT (if equipped): Your Audiophile radio comes equipped with Satellite Ready capability. The kit to enable the Satellite reception is available through your Ford dealer. Detailed satellite instructions are included with the dealer installed kit.

Dealer installed satellite kit only available in the continental United States.

) or decrease ( ) the

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 24

Entertainment Systems

12. AM/FM: Press to select AM/FM frequency band.

Autoset: Allows you to set the strongest local radio stations without losing your original manually set preset stations for AM/FM1/FM2 . Press and momentarily hold AM/FM. AUTOSET will be shown. When the six strongest stations are filled, the station stored in preset 1 will begin playing. If there are less than six strong stations, the system will store the last one in the remaining presets. Press and hold again to disengage.

13. Power/volume: Press to turn ON/OFF; turn to increase or decrease volume levels.

Speed sensitive volume: Radio volume changes automatically and slightly with vehicle speed to compensate for road and wind noise. Recommended level is 1–3. Level 0 turns the feature off and level 7 is the maximum setting. Press and hold the volume control for five seconds. Then press SEL to

increase ( appear in the display.

14. Load: Press to load a CD. Press LOAD and a specific memory preset to load a specific disc. Press and hold to load up to six discs.

15. CD AUX: Press to access CD or AUX mode.

) or decrease ( ) the volume setting. The level will

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 25

Entertainment Systems

16. Scan: Press SCAN to hear a brief sampling of radio stations or CD tracks. Press again to stop.

17. Disc/Tune: Press manually tune down/up the radio

frequency band, or change to the previous/next CD.

CAT: CAT is only available when equipped with Satellite Radio. Your Audiophile radio comes equipped with Satellite ready capability. The kit to enable Satellite reception is available through your Ford dealer. Detailed Satellite instructions are included with the dealer installed kit.

Dealer installed satellite kit only available in the continental United States.

For information regarding SIRIUS Satellite Radio, please call toll-free 888-539-SIRIUS (888-539-7474) or visit the SIRIUS website at www.siriusradio.com

PREMIUM AM/FM STEREO/CASSETTE/SINGLE CD (IF EQUIPPED)

or to

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 26

Entertainment Systems

1. Power/volume: Press to turn ON/OFF; turn to increase/decrease volume.

2. Scan: Press to hear a brief sampling of all listenable stations, tape selections or CD tracks. Press again to stop.

3. CD slot: Insert a CD with the label side up.

4. Cassette door: Insert the cassette with the opening to the right.

5. Eject: Press to eject the cassette/CD. The radio will resume playing.

SCAN

6. Tape: Press to start tape play. Press to stop tape during rewind/fast forward.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 27

CD: Press to start CD play. With the dual media audio, press CD to toggle between single CD and CD changer play (if equipped).

7. Mute: Press to MUTE playing media; press again to return to the playing media.

8. Auto: Press to set first six strongest stations (if available) into AM, FM1 or FM2 memory buttons; press again to return to normal stations.

9. Clock: Press to toggle between station mode and clock mode. Press and hold to set the clock. Press the

SEEK to increase hours. Press the or TUNE

this control will not function.

10. Balance: Press BAL; then press SEL left/right speakers.

SEEK to decrease hours or

TUNE to decrease minutes

to increase minutes. If your vehicle has a stand alone clock

/ to shift sound to the

Entertainment Systems

Fade: Press FADE; then press SEL rear/front speakers.

11. Memory preset buttons: To set a station: Select frequency band AM/FM, tune to a station, press and hold a preset button until sound returns.

/ to shift sound to the

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 28

Entertainment Systems

12. Shuffle (CD): Press to play tracks in random order. Press again to disable.

13. Compression (CD): Press to bring soft and loud passages together for a more consistent listening level. A small “c” will appear in the display to indicate that compression is enabled. Press again to disable.

14. Works in tape mode only. Reduces tape noise and hiss; press to activate/deactivate.

The Dolby威 noise reduction system is manufactured under license from Dolby Laboratories Licensing Corporation. Dolby威 and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation.

15. Side 1–2: Works in tape mode only. Press to play reverse side of the tape.

Dolby威 noise reduction:

16. Fast Forward (FF): In CD mode, press for a slow advance,

press and hold for a fast advance. In TAPE mode, press FF to enable Fast Forward feature. Press FF or TAPE to resume tape play.

17. Rewind (REW): In CD mode, press for a slow reverse, press and

REW

hold for a fast reverse. In TAPE mode, press REW to enable the rewind feature. Press REW or TAPE to resume tape play.

18. Select (SEL): Use with Bass, Treble, Balance and Fade controls.

SEL

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 29

19. Bass: Press BASS; then press SEL

/ to decrease/increase

the bass output.

Treble: Press TREB; then press SEL

/ to decrease/increase

the treble output.

Entertainment Systems

20. Tune: Works in radio mode only. Press TUNE

/ to change

frequency down/up.

21. Seek: Press and release SEEK

/ for previous/next

strong station, selection or track.

22. AM/FM: Press to select AM/FM1/FM2 frequency band.

SEEK

TUNE

SEEK

TUNE

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 30

Entertainment Systems

SATELLITE COMPATIBLE AM/FM STEREO IN-DASH SINGLE CD/MP3 RADIO — LATE AVAILABILITY (IF EQUIPPED)

1. SEEK: Press and release SEEK strong station or track.

2. TEXT: The filename (Fi), song title (So), artist text (Ar) or album text (AL) may be viewed while playing an MP3 selection. When MP3 selection text is shown on the message display its corresponding text indicator (Fi, So, Ar, or AL) is shown in the elapsed time display. Press TEXT to scroll through the text fields. The display will scroll through all of the text in the current field before changing to the next field. (TEXT must be pressed within 3 seconds of the previous press to proceed to the next/last text display. The last text field shown on the display will become the new display message default. TEXT is also available when equipped with Satellite radio. Your radio comes equipped with Satellite ready capability. The kit to enable Satellite reception is available through your dealer. Detailed Satellite instructions are included with the dealer installed kit. Dealer installed satellite kit

only available in the continental United States.

/ for previous/next

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 31

3. AUX: This function is not operational.

4. MUTE: Press to MUTE playing media; press again to return to playing media

5. EJ: Press to eject a CD.

6. Bass: Press BASS; then press SEL the bass output.

Treble: Press TREB; then press SEL the treble output.

7. Select: Use with Bass, Treble, Balance, Fade and other menu selections.

8. Balance: Press BAL; then press SEL left/right speakers.

Fade: Press FADE; then press SEL rear/front speakers.

9. Menu: Press MENU and SEL to access AUTOSET, Speed sensitive volume and Setting the clock.

/ to decrease/increase

/ to shift sound to the

Entertainment Systems

Autoset: Press MENU until AUTOSET appears in the display. Press SEL to toggle ON/OFF. Allows you to set the strongest local radio stations without losing your original manually set preset stations for AM/FM1/FM2. When the six strongest stations are filled, the station stored in preset 1 will begin playing. If there are less than six strong stations, the system will store the last one in the remaining presets.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 32

Entertainment Systems

Speed sensitive volume: Press MENU until SPEED VOL X appears in the display. Then press SEL to increase ( volume setting. The level will appear in the display.

Radio volume changes automatically and slightly with vehicle speed to compensate for road and wind noise. Recommended level is 1–3. Level 0 turns the feature off and level 7 is the maximum setting.

Setting the clock: Press MENU until SELECT HOUR or SELECT MINS is displayed. Use SEL to manually increase ( hours/minutes. Press MENU again to disengage clock mode.

Folder/Track mode: In MP3 mode, press MENU until MODE appears in the display. Use SEL to toggle between FOLDER (only tracks within selected folder are accessible) or TRACK (all tracks on disc are accessible) MODE.

10. REPEAT: Repeats current CD/MP3 track when active (ON). Press to shown repeat status. Press again to toggle status.

11. SHUFFLE: Plays CD/MP3 tracks in random order when active (ON). Press to show shuffle status. Press again to toggle status.

12. FOLDER the next MP3 directory.

: Press to access

) or decrease ( ) the

13. FOLDER the previous MP3 directory.

14. FF(Fast forward): In CD/MP3 mode, press until desired selection is reached.

15. REW(Rewind): In CD/MP3 mode, press until desired selection is reached.

16. SAT (if equipped): Your radio comes equipped with Satellite Ready capability. The kit to enable the Satellite reception is available through your dealer. Detailed satellite instructions are included with the dealer installed kit. Dealer installed

satellite kit only available in the continental United States.

: Press to access

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 33

Entertainment Systems

17. BAND: Press to toggle between AM/FM1/FM2 frequency band.

18. Memory presets: To set a station: Select frequency band; tune to a station, press and hold a preset button until sound returns.

19. Power/volume: Press to turn ON/OFF; turn to increase or decrease volume levels.

20. CD: Press to enter CD mode.

21. COMP(Compression): Brings soft and loud CD passages together for a more consistent listening level when in CD mode. Press COMP to turn the feature ON/OFF.

22. Scan: Press SCAN to hear a brief sampling of radio stations or CD/MP3 tracks. Press again to stop.

23. CAT/Tune: Press manually tune down/up the radio

frequency band.

or to

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 34

Entertainment Systems

CAT: CAT is only available when equipped with Satellite Radio. Your radio comes equipped with Satellite ready capability. The kit to enable Satellite reception is available through your dealer. Detailed Satellite instructions are included with the dealer installed kit. Dealer installed

satellite kit only available in the continental United States.

For information regarding SIRIUS Satellite Radio, please call toll-free 888-539-SIRIUS (888-539-7474) or visit the SIRIUS website at www.siriusradio.com

24. CD slot: Insert a CD with the label side up.

PREMIUM SATELLITE COMPATIBLE AM/FM STEREO/CASSETTE/SINGLE CD/MP3 — LATE AVAILABILITY (IF EQUIPPED)

VOL-PUSH ON

1. CD slot: Insert a CD with the label side up.

BAND

SEEK

TUNE

CAT

REW FF

SCAN

DOLBY B NR

BASS TREB

123456

DISC

TEXT

SEL

SHUFFLE

TAPE

BAL

1-2

FADE

MUTE

AUX

REPEATFOLDER FOLDER

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 35

Entertainment Systems

2. CD Eject: Press to eject a CD. The radio will resume playing.

3. Mute: Press to MUTE playing media; press again to return to the playing media.

4. Tape Eject: Press to eject the cassette. The radio will resume playing.

5. Tape 1–2/CD: Press to begin tape play. If a cassette is already playing, press to change playing sides.

CD: If a CD is loaded in the radio, pressing CD will cause the CD to begin playing.

6. AUX: This function is not operational.

7. MENU: Press to access the following functions:

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 36

Entertainment Systems

Clock: Press MENU until HOURS or MINUTES is displayed. Press SEL to decrease/ increase hours or minutes.

Compression: In CD mode, compression brings soft and loud passages together for a more consistent listening level. Press MENU until COMPRESS is displayed. Use SEL to toggle on/off.

Speed sensitive volume: Radio volume changes automatically and slightly with vehicle speed to compensate for road and wind noise. Recommended level is 1–3. Level 0 turns the feature off and level 7 is the maximum setting. Press MENU until SPEED VOL X appears in the display. Then press SEL to increase/decrease the volume setting. The level will appear in the display.

Dolby: In tape mode, press MENU until DOLBY B XX appears in the display. Press SEL to toggle ON/OFF. The Dolby威 noise reduction system is manufactured under license from Dolby Laboratories Licensing Corporation. Dolby威 and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation.

Folder/Track Mode: In MP3 mode, press MENU until MODE appears in the display. Use SEL to toggle between FOLDER (only tracks within selected folder are accessible) or TRACK (all tracks on disk are accessible) MODE.

Autoset: Press MENU until AUTOSET appears in the display. Press SEL to toggle on/off. Allows you to set the strongest local stations without losing your original memory preset stations for AM/FM1/FM2. When the six strongest stations are filled, the station stored in preset 1 will begin playing. If there are less than six strong stations, the system will store the last one in the remaining presets.

8. REPEAT: Repeats current CD/MP3 track when active (ON). Press to show repeat status. Press again to toggle status.

9. Balance: Press BAL; then press SEL left/right speakers.

/ to shift sound to the

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 37

Entertainment Systems

Fade: Press FADE; then press SEL rear/front speakers.

10. SHUFFLE: Plays CD/MP3 tracks in random order when active (ON). Press to show shuffle status. Press again to toggle status.

11. TEXT/SEL: The filename, song title, artist or album text may be viewed while playing an MP3 selection. Press TEXT to scroll through the text fields. The display will scroll through all of the text in the current field before changing to the next field. (TEXT must be pressed within three seconds of the previous button press to proceed to the next/last text display. ) The last text field shown on the display will become the new display message default.

TEXT is also available when equipped with Satellite radio. Your radio comes equipped with Satellite ready capability. The kit to enable Satellite reception is available through your dealer. Detailed Satellite instructions are included with the dealer installed kit. Dealer installed satellite kit

only available in the continental United States.

Select: Use with Bass, Treble, Balance, Fade and other menu selections.

12. FOLDER the next MP3 directory folder.

/ to shift sound to the

: Press to access

13. FOLDER the previous MP3 directory folder.

14. Bass: Press BASS; then press SEL the bass output.

/ to decrease/increase

: Press to access

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 38

Entertainment Systems

Treble: Press TREB; then press SEL the treble output.

/ to decrease/increase

15. Fast Forward (FF): In CD mode, press and hold to fast

forward. In tape mode, press to activate fast forward. Press FF again to return to play.

16. Rewind (REW): In CD mode, press and hold to reverse CD. In

REW

tape mode, press to rewind. Press REW again to return to play.

17. Memory preset buttons: To set a station: Press BAND to select the frequency band (AM/FM1/FM2), tune to a station, press and hold a preset button until sound returns.

18. Scan: Press to hear a brief sampling of all listenable stations, tape selections or CD tracks. Press again to stop.

19. Tune/CAT: TUNE: Works in radio mode only. Press

TUNE

/ to change frequency

down/up.

satellite kit only available in the continental United States.

For information regarding SIRUS Satellite Radio, please call toll-free 888–539–SIRIUS (888–539–7474) or visit the SIRIUS website at www.siriusradio.com.

20. Seek: Press and release SEEK

/ for previous/next

strong station, tape selection or CD track.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 39

Entertainment Systems

21. BAND: Press to toggle through AM/FM1/FM2 frequency bands.

22. Cassette door: Insert the cassette with the opening to the right.

23. Power/volume: Press to turn ON/OFF; turn to increase/decrease volume.

AUDIOPHILE SATELLITE COMPATIBLE AM/FM STEREO IN-DASH SIX CD/MP3 RADIO — LATE AVAILABILITY (IF EQUIPPED)

1. SEEK: Press and release SEEK strong station or track.

2. TEXT: The filename (Fi), song title (So), artist text (Ar) or album text (AL) may be viewed while playing an MP3 selection. When MP3 selection text is shown on the

/ for previous/next

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 40

Entertainment Systems

message display its corresponding text indicator (Fi, So, Ar, or AL) is shown in the elapsed time display. Press TEXT to scroll through the text fields. The display will scroll all of the text in the current field before changing to the next field. (TEXT must be pressed within 3 seconds of the previous button press to proceed to the next/last text display.)

TEXT is also available when equipped with Satellite radio. Your Audiophile radio comes equipped with Satellite ready capability. The kit to enable Satellite reception is available through your dealer. Detailed Satellite instructions are included with the dealer installed kit. Dealer

installed satellite kit only available in the continental United States.

3. AUX: This function is not operational.

4. MUTE: Press to MUTE playing media; press again to return to playing media

5. EJ: Press to eject a CD. Press EJ and a memory preset to eject a specific disc. Press and hold to eject all loaded discs.

6. Bass: Press BASS; then press SEL the bass output.

Treble: Press TREB; then press SEL the treble output.

/ to decrease/increase

7. Select: Use with Bass, Treble, Balance, Fade and other menu functions.

8. Balance: Press BAL; then press SEL left/right speakers.

Fade: Press FADE; then press SEL rear/front speakers.

/ to shift sound to the

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 41

Entertainment Systems

9. Menu: Press and hold MENU to access RDS on/off. Use SEL to toggle RDS on/off. Press MENU again to access Traffic mode, Program Type mode or Show Type mode. (MENU must be pressed within 10 seconds to proceed to the next RDS mode).

U.S. markets.

FIND Program type: Allows you to search RDS-equipped stations for a certain category of music format: Classic, Country, Info, Jazz, Oldies, R&B, Religious, Rock, Soft, Top 40. Press and hold MENU until RDS XX is shown in the display. Press MENU until FIND appears in the display. Use SEL to scroll through music types. Press SEEK or SCAN to search for a station playing the requested music category.

Show TYPE: Displays the station’s call letters or music format. Press and hold MENU until RDS XX is shown in the display Press MENU until SHOW appears in the display. Use SEL to select NAME or TYPE.

Compression: Brings soft and loud CD passages together for a more consistent listening level when in CD mode. Press MENU until compression status is displayed. Press the SEL control to enable the compression feature when COMPRESS OFF is displayed. Press the SEL control again to disable the feature when COMPRESS ON is displayed.

Occupancy mode: Press MENU until occupancy mode appears in the display. Press SEL to select ALL SEATS, DRIVER SEAT or REAR SEATS occupancy mode.

Autoset: Allows you to set the strongest local radio stations without losing your original manually set preset stations for AM/FM1/FM2 . Press MENU until AUTOSET appears in the display. Press SEL to toggle ON/OFF. When the six strongest stations are filled, the station stored in preset 1 will begin playing. If there are less than six strong stations, the system will store the last one in the remaining presets.

Speed sensitive volume: Radio volume changes automatically and slightly with vehicle speed to compensate for road and wind noise.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 42

Entertainment Systems

Recommended level is 1–3. Level 0 turns the feature off and level 7 is the maximum setting. Press MENU until SPEED VOL X appears in the display. Then press SEL

to increase ( appear in the display.

Setting the clock: Press MENU until SELECT HOUR or SELECT MINS is displayed. Use SEL to manually increase ( hours/minutes. Press MENU again to disengage clock mode.

10. REPEAT: Repeats current CD/MP3 track when active (ON). Press to show repeat status. Press again to toggle status.

11. SHUFFLE: Plays CD/MP3 tracks in random order when active (ON). Press to show shuffle status. Press again to toggle status.

12. FOLDER the next MP3 directory.

) or decrease ( ) the volume setting. The level will

) or decrease ( ) the

: Press to access

13. FOLDER the previous MP3 directory.

14. FF(Fast forward): In CD mode, press until desired selection is reached.

15. REW(Rewind): In CD mode, press until desired selection is reached.

satellite kit only available in the continental United States.

: Press to access

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 43

Entertainment Systems

17. BAND: Press to toggle between AM/FM1/FM2 frequency band.

18. Memory presets: To set a station: Select frequency band, tune to a station, press and hold a preset button until sound returns.

19. Power/volume: Press to turn ON/OFF; turn to increase or decrease volume levels.

20. Load: Press to load a CD. Press LOAD and a memory preset to load to a specific disc slot. Press and hold to load up to six discs.

21. CD: Press to enter CD mode.

22. Scan: Press SCAN to hear a brief sampling of radio stations or CD/MP3 tracks. Press again to stop.

23. Disc/Tune: Press

or to

manually tune down/up the radio frequency band, or to listen to the previous/next CD.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 44

Entertainment Systems

CAT: CAT is only available when equipped with Satellite Radio. Your Audiophile radio comes equipped with Satellite ready capability. The kit to enable Satellite reception is available through your dealer. Detailed Satellite instructions are included with the dealer installed kit. Dealer

installed satellite kit only available in the continental United States.

For information regarding SIRIUS Satellite Radio, please call toll-free 888-539-SIRIUS (888-539-7474) or visit the SIRIUS website at www.siriusradio.com

24. CD slot: Insert a CD, label side up.

FAMILY ENTERTAINMENT SYSTEM (IF EQUIPPED)

Your vehicle may be equipped with a Family Entertainment System (FES). Refer to the DVD Supplement Guide for further information on your system.

RADIO FREQUENCIES

AM and FM frequencies are established by the Federal Communications Commission (FCC) and the Canadian Radio and Telecommunications Commission (CRTC). Those frequencies are:

AM - 530, 540–1700, 1710 kHz

FM- 87.7, 87.9–107.7, 107.9 MHz

RADIO RECEPTION FACTORS

There are three factors that can affect radio reception:

• Distance/strength: The further you travel from an FM station, the

weaker the signal and the weaker the reception.

• Terrain: Hills, mountains, tall buildings, power lines, electric fences,

traffic lights and thunderstorms can interfere with your reception.

• Station overload: When you pass a broadcast tower, a stronger signal

may overtake a weaker one and play while the weak station frequency is displayed.

CASSETTE/PLAYER CARE

Do:

• Use only cassettes that are 90 minutes long or less.

• Tighten very loose tapes by inserting a finger or pencil into the hole

and turning the hub.

• Remove loose labels before inserting tapes.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 45

Entertainment Systems

• Allow tapes which have been subjected to extreme heat, humidity or

cold to reach a moderate temperature before playing.

• Clean the cassette player head with a cassette cleaning cartridge after

10–12 hours of play to maintain good sound/operation.

Don’t:

• Expose tapes to direct sunlight, extreme humidity, heat or cold.

• Leave tapes in the cassette player for a long time when not being

played.

CD/CD PLAYER CARE

Do:

• Handle discs by their edges only. Never touch the playing surface.

• Inspect discs before playing. Clean only with an approved CD cleaner

and wipe from the center out.

Don’t:

• Expose discs to direct sunlight or heat sources for extended periods

of time.

• Insert more than one disc into each slot of the CD changer magazine.

• Clean using a circular motion.

CD units are designed to play commercially pressed 4.75 in (12 cm) audio compact discs only. Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Irregular shaped CDs, CDs with a scratch protection film attached, and CDs with homemade paper (adhesive) labels should not be inserted into the CD player. The label may peel and cause the CD to become jammed. It is recommended that homemade CDs be identified with permanent felt tip marker rather than adhesive labels. Ball point pens may damage CDs. Please contact your dealer for further information.

AUDIO SYSTEM WARRANTY AND SERVICE

Refer to the Warranty Guide for audio system warranty information. If service is necessary, see your dealer or qualified technician.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 46

Climate Controls

MANUAL HEATING AND AIR CONDITIONING SYSTEM (IF EQUIPPED)

1. Temperature selection: Controls the temperature of the airflow in the vehicle.

2. Air flow selections: Controls the direction of the airflow in the vehicle. See the following for a brief description on each control.

MAX A/C: Uses recirculated air through the instrument panel registers to cool the vehicle. This mode is noisier than other modes, but is more economical and efficient and may help prevent undesirable odors from entering the vehicle.

: Distributes outside air through the instrument panel vents.

: Distributes outside air through the instrument panel vents and the

floor vents.

O (OFF): Outside air is shut out and the fan will not operate.

: Distributes outside air through the floor vents.

: Distributes outside air through the windshield defroster vents and

floor vents.

: Distributes outside air through the windshield defroster vents.

3. A/C: Uses outside air to cool the vehicle. Air flows from the instrument panel register vents only.

4. Rear Defrost: Clears ice and fog from the rear window.

5. Fan speed adjustment: Controls the volume of air circulated in the vehicle.

Operating tips

• To reduce fog build up on the windshield during humid weather, place

the air flow selector in the

• To reduce humidity build up inside the vehicle, do not drive with the

air flow selector in the OFF position.

• Do not put objects under the front seats that will interfere with the

airflow to the rear seats.

• Remove any snow, ice or leaves from the air intake area at the base of

the windshield.

position.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 47

Climate Controls

• To improve the A/C cool down, drive with the windows slightly open

for 2–3 minutes after start up or until the vehicle has been “aired out.”

For maximum cooling performance in panel (

• Select MAX A/C mode. MAX A/C uses recirculated air with A/C to

provide a cooler airflow.

• Move the temperature control to the coolest setting.

• Set the fan to the highest speed initially, then adjust in order to

maintain comfort.

To allow side window defogging and demisting while warming up the vehicle cabin:

1. Select

2. Select A/C.

3. Set the temperature control to maintain comfort.

4. Set the fan speed to highest setting.

5. Direct the outer instrument panel vents towards the side windows. To increase airflow to the outer instrument panel vents, close the vents located in the middle of the instrument panel.

Do not place objects on top of the instrument panel as these objects may become projectiles in a collision or sudden stop.

) mode:

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 48

Climate Controls

Dual Automatic Temperature Control (DATC) system (if equipped)

14 15 16 17 2 31

AUTO

EXT

F F

F C

OFF

A/C

DUAL

10 9 8 7 613 5 412 11

1. A/C control: Uses outside air to cool the vehicle. Press to turn on/off

in all modes except

or .

2. Recirculation control: Cools the vehicle more quickly by recirculating the cabin air instead of using outside air and helps prevent unpleasant outside odors or fumes from entering the vehicle. Press to turn on/off.

3. Passenger side temperature control: Controls the temperature on the passenger side of the vehicle when in dual zone mode. To enter dual zone, press the passenger temperature control or DUAL. The passenger temperature will appear in the display.

4. Rear defrost control: Removes ice and fog from the rear window. Press to turn on/off.

5. DUAL (Single/dual electric temperature control): Allows the driver to have full control of the cabin temperature settings (single zone) or allows the passenger to have control of their individual temperature settings (dual zone control). Press to enable turn on dual zone mode, press again to return to single zone.

A/C

DUAL

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 49

Climate Controls

6. : Distributes outside air through the windshield defroster vents.

: Distributes outside air through the windshield defroster vents

and floor vents.

: Distributes outside air through the floor vents.

: Distributes outside air through the instrument panel vents and

the floor vents.

10.

11. OFF: Outside air is shut out and

: Distributes outside air through the instrument panel vents.

OFF

the fan will not operate.

12. AUTO: Press to select the

AUTO

desired temperature shown in the display window. The system will automatically determine the fan speed, airflow location, outside or recirculated air to heat or cool the vehicle to the selected temperature.

13. Manual override controls:

OFF

Allows you to manually determine where airflow is directed. To return to fully automatic control, press AUTO.

14. Driver’s side temperature control: Controls the temperature on the driver side of the vehicle.

15. Fan Speed: Used to manually enable or disable the fan speed.

16. EXT: Displays the outside air

EXT

temperature. It will remain displayed until the EXT control is pressed again. The external temperature will be most accurate when the vehicle has been moving for a period of time.

17. Temperature conversion:

F C

Press to toggle between Fahrenheit and Celsius temperature on the DEATC display only. The set point temperatures in Celsius will be displayed in half-degree increments.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 50

Climate Controls

Operating tips

• To reduce fog build up on the windshield during humid weather, place

the air flow selector in the

• To reduce humidity build up inside the vehicle, do not drive with the

air flow selector in the OFF or with recirculated air engaged.

• Do not put objects under the front seats that will interfere with the

airflow to the rear seats.

• Remove any snow, ice or leaves from the air intake area at the base of

the windshield.

• To improve the A/C cool down, drive with the windows slightly open

for 2–3 minutes after start up or until the vehicle has been “aired out.”

For maximum cooling performance:

• Select and A/C and recirculated air. Use recirculated air with A/C to

provide a cooler airflow.

• Move the temperature control to the coolest setting.

To allow side window defogging and demisting while warming up the vehicle cabin:

1. Select

2. Select A/C.

3. Set the temperature control to maintain comfort.

4. Set the fan speed to highest setting.

5. Direct the outer instrument panel vents towards the side windows. To increase airflow to the outer instrument panel vents, close the vents located in the middle of the instrument panel.

position.

Do not place objects on top of the instrument panel as these objects may become projectiles in a collision or sudden stop.

Auxiliary system (if equipped)

Your vehicle may be equipped with auxiliary climate controls. These allow the front or rear seat passengers to control airflow direction, temperature and fan level of the rear compartment to quickly heat or cool the entire vehicle.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 51

Climate Controls

Front auxiliary controls:

1. Temperature control: Determines temperature level. If the main climate control system is cooling in MAX A/C or auxiliary controls will not function as the entire vehicle will operate at a full cool temperature.

2. Mode selector: Press to select air flow direction to or

seating. The selected mode will illuminate on the temperature control.

3. Fan control: Determines fan speed levels. Turn to REAR (if equipped) to give rear seat passengers control of the rear auxiliary controls. Otherwise, the front controls will determine the settings for the entire vehicle cabin. If set to O (OFF), the front and rear auxiliary controls will not function.

Rear auxiliary controls (if equipped):

Once the front auxiliary control is set to REAR, the rear seat passengers may use the rear auxiliary controls in the overhead console to make the desired adjustments.

(Panel).

Directs air to the floor of the third row seating.

directs air to the overhead registers of the second and third row

mode, the

(Floor)

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 52

Climate Controls

1. Temperature control: Determines temperature levels. If the main climate control system is cooling in MAX A/C or

mode,

the auxiliary controls will not

3 1

function as the entire vehicle will operate at a full cool temperature.

2. Mode selector: Press to select between air flow to

(Floor)

or (Panel).

Directs air to the floor of the third row seating.

directs air to the overhead registers of the second and third row

seating. The selected mode will illuminate on the temperature control.

3. Fan control: Determines fan speed levels.

Floor console climate controls (if equipped)

Controls the direction of the airflow to the rear of the vehicle.

selects air flow from the console

panel registers.

selects air flow

from the floor console registers.

REAR WINDOW DEFROSTER

The rear defroster control is located on the instrument panel.

Press the rear defroster control to clear the rear window of thin ice and fog.

• A small LED will illuminate when

the rear defroster is activated.

The ignition must be in the ON position to operate the rear window defroster.

The defroster turns off automatically after 10 minutes or when the ignition is turned to the OFF position. To manually turn off the defroster before 10 minutes have passed, push the control again.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 53

Lights

HEADLAMP CONTROL

Turns the lamps off.

Turns on the parking lamps, instrument panel lamps, license plate lamps and tail lamps.

Turns the headlamps on.

Autolamp system (if equipped)

The autolamp system sets the headlamps to turn on and off automatically. The autolamp control, located on the headlamp control, may be set to:

• turn on the lamps automatically

at night

• turn off the lamps automatically during the daylight

• keep the lamps on for up to three minutes after the key is turned to

OFF.

To turn the autolamps on, rotate the control counterclockwise to

Foglamp control (if equipped)

The foglamps can be turned on only when the headlamp control is in

the the high beams are not turned on.

Pull headlamp control towards you to turn foglamps on. The foglamp indicator light when foglamp is activated.

Push the headlamp control towards the instrument panel to deactivate the foglamps.

Daytime running lamps (DRL) (if equipped)

To activate DRL:

• the ignition must be in the ON position and

, and position and

will illuminate

Lights

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 54

Lights

• the headlamp control is in the or position

• the parking brake must be disengaged.

Always remember to turn on your headlamps at dusk or during

inclement weather. The Daytime Running Light (DRL) System does not activate your tail lamps and generally may not provide adequate lighting during these conditions. Failure to activate your headlamps under these conditions may result in a collision.

High beams

Push the lever toward the instrument panel to activate. Pull the lever towards you to deactivate.

OFF

Flash to pass

Pull the lever toward you to activate. Release the lever to deactivate.

OFF

INT2

INT1

OFF

INT2

INT1

OFF

Use to adjust the brightness of the instrument panel when exterior lights are on.

• Rotate up to brighten.

• Rotate down to dim.

• Rotate to full up position (past

detent) to turn on interior lamps.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 55

Lights

• Rotate to full down position (past detent) to turn off the interior lamps and will also disable the illuminated entry feature.

AIMING THE HEADLAMPS

The headlamps on your vehicle are properly aimed before leaving the assembly plant. If your vehicle is involved in an accident or if you have problems fixing the alignment of your headlamps, have them checked by a qualified service technician.

Headlamp aim adjustment

The headlamps on your vehicle can only be vertically adjusted. Your vehicle does not require horizontal aim adjustments.

To adjust the headlamps:

1. Park your vehicle on a level

surface about 25 feet (7.6 meters) away from a vertical plain surface (3). Check your headlamp alignment at night or in a dark area so that you can see the headlamp beam pattern.

• (1) Eight feet

• (2) Center height of lamp to

ground

• (3) Twenty-five feet

• (4) Horizontal reference line

2. The center of the headlamp has a 3.0 mm circle on the lens. Measure

the height from the center of your headlamp to the ground (2) and mark an 8 foot (2.4 meter) long horizontal line on the plain surface (1) at this height (masking tape works well).

3. Turn on the low beam headlamps.

The brightest part of the light should be below the horizontal line (4). If it is above the line the headlamp will need to be adjusted.

4. Open the hood.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 56

Lights

5. Locate the vertical adjuster for

each headlamp. Adjust the aim by turning the adjuster control either clockwise (to adjust down) or counterclockwise (to adjust up).

Note: Usea4mmsocket or box wrench to turn the vertical adjuster control.

6. Horizontal aiming is not required

for this vehicle and is non-adjustable.

TURN SIGNAL CONTROL

• Push down to activate the left turn signal.

• Push up to activate the right turn signal.

OFF

INT2

INT1

INTERIOR LAMPS

Dome/reading lamps

The dome lamp lights when:

• any door is opened.

• the instrument panel dimmer

switch is rotated up until the courtesy lamps come on.

• any of the remote entry controls are pressed and the ignition is OFF.

The reading portion, the two outer lights, can only be toggled on and off at the lamp.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 57

Lights

Cargo/reading lamps

The dome portion of the lamp or the center light can be turned on when the headlamp control is rotated fully up or when a door is opened.

With the ignition in the ACC or ON position, the rear dome lamp can be turned ON or OFF by sliding the control.

BULBS

Replacing exterior bulbs

Check the operation of all the bulbs frequently.

Replacing the interior bulbs

Check the operation of the bulbs frequently. To replace any of the interior bulbs, see a dealer or qualified technician.

Using the right bulbs

Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized “D.O.T.” for North America and an “E” for Europe to assure lamp performance, light brightness and pattern and safe visibility. Using incorrect bulbs may damage the lamp assembly or void the lamp assembly warranty or may not provide quality bulb burn time.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 58

Lights

Function Number of bulbs Trade number

Park/turn lamps (front)

Headlamp high beam 2 9005 Headlamp low beam 2 9006 Rear stop/turn/tail

lamps Rear license plate

lamps Backup lamp 2 3156K High-mount stop

lamps Fog lamp 2 9145 Cargo lamp 1 211-2 Interior overhead lamp 1 912 (906) Front door courtesy

lamp Map lamps 2 168 (T10) Ashtray lamp 1 161 All replacement bulbs are clear in color except where noted. To replace all instrument panel lights - see your dealer.

3457

3157K

168

W5W

168

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 59

Replacing headlamp bulbs

Do not touch the glass of a halogen bulb.

1. Turn off the headlamps and open

the hood.

2. Pry up the two retainer pins until

they stop to release the headlamp assembly from the vehicle, then pull headlamp forward.

3. Disconnect the electrical

connector by pushing the center tab and pulling down.

4. Remove the old bulb by turning

counterclockwise to unlock and pull it out.

Lights

Handle a halogen headlamp bulb carefully and keep out of

children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.

Reverse steps to reinstall bulb(s).

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 60

Lights

Replacing front parking lamp/turn signal/sidemarker bulbs

1. Turn off the headlamp switch to off.

2. Remove headlamp screw from the bulb assembly.

3. Disengage lamp assembly.

4. Rotate the bulb socket counterclockwise and remove it from the lamp assembly.

5. Pull the bulb straight out of the socket.

Reverse steps to reinstall bulb(s).

Replacing tail/brake/turn/backup lamp bulbs

1. Turn the headlamp switch to OFF and open the liftgate.

2. Remove the two screws from the lamp assembly.

3. Remove the lamp assembly.

4. Rotate the bulb socket counterclockwise and remove it from the lamp assembly.

5. Pull the bulb straight out of the socket.

Reverse steps to reinstall bulb(s).

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 61

Replacing foglamp bulbs

1. Make sure the headlamp switch is in the OFF position.

2. Remove the plastic splash shield by removing the two screws on the front of the fenderwell.

3. Remove the bulb socket from the foglamp by turning it counterclockwise.

4. Disconnect the electrical connector.

Reverse steps to reinstall bulb(s).

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is in the OFF position and then remove two screws and the license plate lamp assembly.

2. Remove the bulb socket from the lamp assembly by turning counterclockwise and pull the bulb straight out.

Lights

Reverse steps to reinstall bulb(s).

Replacing high-mount brakelamp bulb

1. Remove the two screws and lamp assembly from vehicle.

2. Remove the bulb socket from the lamp assembly by depressing the snaps and pull the bulb straight out.

Reverse steps to reinstall bulb(s).

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 62

Driver Controls

MULTI-FUNCTION LEVER

Windshield wiper: Rotate the end of the control away from you to increase the speed of the wipers; rotate towards you to decrease the speed of the wipers.

Speed dependent wipers: When the wiper control is on, the speed of the wipers will automatically adjust with the vehicle speed. The faster your vehicle is travelling the faster the wipers will go.

Windshield washer: Push the end of the stalk:

• briefly: causes a single swipe of the wipers without washer fluid.

• a quick push and hold: the wipers will swipe three times with washer fluid.

• a long push and hold: the wipers and washer fluid will be activated for up to ten seconds.

OFF

INT2

INT1

OFF

INT1

OFF

Rear window wiper/washer controls

For rear wiper operation, rotate the rear window wiper and washer control to the desired position. Select:

INT 1 — 3–4 second interval rear

OFF

INT2

INT1

OFF

wiper.

INT 2 — 8–10 second interval rear wiper.

OFF — Rear wiper and washer off.

For rear wash cycle, rotate (and hold as desired) the rear wiper/washer control to either

position.

From either position, the control will automatically return to the INT 2 or OFF position.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 63

Driver Controls

Changing the wiper blades

1. Pull the wiper arm away from the

vehicle. Turn the blade at an angle from the wiper arm. Push the lock pin manually to release the blade and pull the wiper blade down toward the windshield to remove it from the arm.

2. Attach the new wiper to the

wiper arm and press it into place until a click is heard.

3. Replace wiper blades every 6

months for optimum performance.

4. Poor wiper quality can sometimes

be improved by cleaning the wiper blades, refer to Window and wiper blades in the Cleaning chapter.

5. To prolong the life of the wiper blades, it is highly recommended to

scrape off the ice on the windshield before turning on the wipers. The layer of ice has many sharp edges and can damage the micro edge of the wiper rubber element.

TILT STEERING COLUMN

Pull the lever down to unlock the steering column. While the lever is in the down position, tilt the steering column to its desired orientation.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 64

Driver Controls

Lift the lever back to its original position to lock the steering column.

Never adjust the steering column when the vehicle is

moving.

CENTER CONSOLE

Your vehicle may be equipped with a variety of console features. These include:

• Utility compartment with cassette/compact disc storage

• Auxiliary power point

• Cupholders

• Tissue box holder (located on underside of console lid)

• Ash tray (if equipped)

The rear side of the console may incorporate the following features:

• Air vents

• Cupholders (will pull up with break away feature)

• Rear power point

Use only soft cups in the cupholder. Hard objects can injure you in a collision.

Cell phone use

The use of Mobile Communications Equipment has become increasingly important in the conduct of business and personal affairs. However, drivers must not compromise their own or others’ safety when using such equipment. Mobile Communications can enhance personal safety and security when appropriately used, particularly in emergency situations. Safety must be paramount when using mobile communications equipment to avoid negating these benefits.

Mobile Communication Equipment includes, but is not limited to cellular phones, pagers, portable email devices, in vehicle communications systems, telematics devices and portable two-way radios.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 65

Driver Controls

A driver’s first responsibility is the safe operation of the vehicle.

The most important thing you can do to prevent a crash is to avoid distractions and pay attention to the road. Wait until it is safe to operate Mobile Communications Equipment.

Rear center console features (if equipped)

The rear center console incorporates the following features:

• Utility compartment

• Cupholders

• Flip forward armrest to provide a

flat load floor

OVERHEAD CONSOLE (IF EQUIPPED)

The appearance of your vehicle’s overhead console will vary according to your option package.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 66

Driver Controls

Storage compartment

Press the latch to open the storage compartment.

Installing a garage door opener (if equipped)

The storage compartment can be converted to accommodate a variety of aftermarket garage door openers:

• Place the Velcro hook onto the side of the aftermarket transmitter opposite of the button.

• Place the transmitter into storage compartment, button down.

• Place the provided height adaptors onto the back of the door as needed.

• Close the door.

• Press the depression in the door

to activate the transmitter.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 67

Driver Controls

Illuminated visor mirror (if equipped)

Lift the mirror cover to turn on the visor mirror lamps.

Type A

Type B

Slide on rod feature

Rotate the visor towards the side window and extend it rearward for additional sunlight coverage.

Note: To stow the visor back into the headliner, visor must be retracted before moving it back towards the windshield.

AUXILIARY POWER POINT (12VDC)

Power point outlets are designed for accessory use only. Do not hang any type of accessories or accessory bracket from their plugs. Improper use of the power point outlet can cause damage not covered by your warranty.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 68

Driver Controls

Do not plug electrical accessories into the cigarette lighter socket (if equipped). Always use the power point for accessories.

Do not use the power point for operating the cigarette lighter element.

The maximum power each power point can supply depends on the fuse rating. For example: a 20A fuse should supply a maximum of 240 Watts, a 15A fuse should supply a maximum of 180 Watts. Exceeding these limits will result in a blown fuse.

Always keep the power point caps closed when not being used.

Rear auxiliary power point (if equipped)

A second auxiliary power point is located on the rear side of the console. It is accessible from the rear seats.

POWER WINDOWS

Do not leave children unattended in the vehicle and do not let children play with the power windows. They may seriously injure

themselves.

When closing the power windows, you should verify they are free of obstructions and ensure that children and/or pets are not in

the proximity of the window openings.

Press and hold the bottom part of the rocker switch to open the window. Press and hold the top part of the rocker switch to close the window.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 69

Driver Controls

One touch down

Allows the driver’s window to open fully without holding the control down. Press completely down on AUTO and release quickly. Press again to stop.

Window lock

The window lock feature allows only the driver to operate the power windows.

To lock out all the window controls except for the driver’s press the left side of the control. Press the right side to restore the window controls.

Accessory delay

With accessory delay, the window switches, audio system and moon roof may be used for up to ten minutes after the ignition switch is turned to the OFF position or until any door is opened.

POWER SIDE VIEW MIRRORS

The ignition must be in the ACC or ON position to adjust the power side view mirrors.

To adjust your mirrors:

1. Rotate the control clockwise to

adjust the right mirror and rotate the control counterclockwise to adjust the left mirror.

2. Move the control in the direction

you wish to tilt the mirror.

3. Return to the center position to

lock mirrors in place.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 70

Driver Controls

Heated outside mirrors (if equipped)

Both mirrors are heated automatically to remove ice, mist and fog when the rear window defrost is activated.

Do not remove ice from the mirrors with a scraper or attempt to readjust the mirror glass if it is frozen in place. These actions could cause damage to the glass and mirrors.

Fold-away mirrors

Pull the side mirrors in carefully when driving through a narrow space, like an automatic car wash.

Automatic dimming rear view mirror

Your vehicle may be equipped with an inside rear view mirror with an auto-dimming feature. When the auto-dimming mirror is turned on, as indicated by an illuminated green LED to the left of the button on mirror, it will detect bright lights(glare) from behind the vehicle, and will change from the normal, high reflective state, to the darkened state to minimize glare.

When the auto-dimming mirror is turned on, it will automatically return to the normal, high reflective, state whenever the vehicle is placed in R (Reverse) to ensure a clear view while backing up.

Do not block the sensor located to the right of the mirror button or the sensor located on the back side of the mirror as this may impair mirror performance.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 71

Driver Controls

POWER ADJUSTABLE FOOT PEDALS (IF EQUIPPED)

The accelerator and brake pedal should only be adjusted when the vehicle is stopped and the gearshift lever is in the P (Park) position.

Press and hold the rocker control to adjust accelerator and brake pedal toward you or away from you.

The adjustment allows for approximately 3 inches (71–76 mm) of maximum travel.

Never adjust the accelerator and brake pedal with feet on the pedals while the vehicle is moving.

SPEED CONTROL (IF EQUIPPED)

With speed control set, you can maintain a speed of 30 mph (48 km/h) or more without keeping your foot on the accelerator pedal. Speed control does not work at speeds below 30 mph (48 km/h).

Do not use the speed control in heavy traffic or on roads that are winding, slippery or unpaved.

Setting speed control

The controls for using your speed control are located on the steering wheel for your convenience.

1. Press the ON control and release

it.

2. Accelerate to the desired speed.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 72

Driver Controls

3. Press the SET + control and

release it.

4. Take your foot off the accelerator

pedal.

5. The indicator light

on the

instrument cluster will turn on.

Note:

• Vehicle speed may vary momentarily when driving up and down a steep hill.

• If the vehicle speed increases above the set speed on a downhill, you may want to apply the brakes to reduce the speed.

• If the vehicle speed decreases more than 10 mph (16 km/h) below your set speed on an uphill, your speed control will disengage.

Resuming a set speed

Press the RES (resume) control and release it. This will automatically return the vehicle to the previously set speed. The RES control will not work if the vehicle speed is not faster than 30 mph (48 km/h).

COAST

SET

COAST

RES

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 73

Driver Controls

Increasing speed while using speed control

There are two ways to set a higher speed:

• Press and hold the SET + control until you get to the desired speed, then release the control. You can also use the SET + control to operate the Tap-Up function. Press and release this control to increase the vehicle set speed in small amounts by 1 mph (1.6 km/h).

• Use the accelerator pedal to get to the desired speed. When the vehicle reaches that speed press and release the SET + control.

Reducing speed while using speed control

There are two ways to reduce a set speed:

• Press and hold the COAST/CST control until you get to the desired speed, then release the control. You can also use the COAST/CST control to operate the Tap-Down function. Press and release this control to decrease the vehicle set speed in small amounts by 1 mph (1.6 km/h).

• Depress the brake pedal until the desired vehicle speed is reached, press the SET + control.

SET

COAST

SET

COAST

RES

SET

COAST

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 74

Driver Controls

Turning off speed control

There are two ways to turn off the speed control:

• Depress the brake pedal. This will not erase your vehicle’s previously set speed.

• Press the speed control OFF control.

Note: When you turn off the speed control or the ignition, your speed control set speed memory is erased.

STEERING WHEEL CONTROLS (IF EQUIPPED)

These controls allow you to operate some radio and climate control features.

Audio control features

Press

• AM, FM1, FM2,

• TAPE (if equipped),

• CD (if equipped), or

• DVD (if equipped).

to select:

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 75

In AM, FM1, or FM2 mode:

• Press MEM to select preset stations within the selected radio band.

In Tape mode:

• Press MEM to select the next selection on the tape.

In CD mode:

• Press MEM to select the next selection on the CD.

In any mode:

• Press VOL + or − to adjust volume.

Climate control features

Press TMP + or - to adjust temperature.

Driver Controls

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 76

Driver Controls

Press + or - to adjust fan speed.

MOON ROOF (IF EQUIPPED)

You can move the glass panel of the moon roof back to open or tilt up to ventilate the vehicle.

To open the moon roof:

The moon roof is equipped with an automatic, one-touch, express opening feature. Press and release the rear portion of the control. To stop motion at any time during the one-touch opening, press the control a second time.

To close the moon roof:

Press and hold the front portion of the control until the glass panel stops moving. Once fully closed, the rear of the glass panel will appear higher than the front edge.

To vent:

To tilt the moon roof into the vent position (when the glass panel is closed), press and hold the front portion of the control. To close the moon roof from the vent position, press and hold the rear portion of the control until the glass panel stops moving.

If the battery is disconnected, discharged, or a new battery is installed, the moon roof needs to be opened to the vent position to reset the moon roof positions.

The moon roof has a sliding shade that can be opened or closed when the glass panel is shut. To close the shade, pull it toward the front of the vehicle.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 77

Driver Controls

Do not let children play with the moon roof or leave children unattended in the vehicle. They may seriously hurt themselves.

HOMELINK姞 WIRELESS CONTROL SYSTEM (IF EQUIPPED)

The HomeLink威 Wireless Control System, located on the overhead console, provides a convenient way to replace up to three hand-held transmitters with a single built-in device. This feature will learn the radio frequency codes of most transmitters to operate garage doors, entry gate operators, security systems, entry door locks, and home or office lighting.

When programming your HomeLink威 Wireless Control System to a garage door or gate, be sure that people and objects are out of

the way to prevent potential harm or damage.

Do not use the HomeLink威 Wireless Control System with any garage door opener that lacks safety stop and reverse features as required by U.S. federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). A garage door which cannot detect an object, signaling the door to stop and reverse, does not meet current U.S. federal safety standards. For more information, contact HomeLink威 at: www.homelink.com or 1–800–355–3515.

Retain the original transmitter for use in other vehicles as well as for future programming procedures (i.e. new HomeLink威 equipped vehicle purchase). It is also suggested that upon the sale of the vehicle, the programmed Homelink威 buttons be erased for security purposes, refer to Programming in this section.

Programming

Do not program HomeLink威 with the vehicle parked in the garage.

Note: Some vehicles may require the ignition switch to be turned to the

second (or “ACC”) position for programming and/or operation of the HomeLink威. It is also recommended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink威 for quicker training and accurate transmission of the radio-frequency signal.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 78

Driver Controls

1. Press and hold the two outside

buttons releasing only when the indicator light begins to flash after 20 seconds. Do not repeat Step one to program additional hand-held transmitters to the remaining two HomeLink威 buttons. This will erase previously programmed hand-held transmitter signals into HomeLink威.

2. Position the end of your

hand-held transmitter 1–3 inches (2–8 cm) away from the HomeLink威 button you wish to program (located on your overhead console) while keeping the indicator light in view.

3. Simultaneously press and hold

both the HomeLink威 and hand-held transmitter button. Do not release

the buttons until Step 4 has been completed.

Some entry gates and garage door openers may require you to replace Step 3 with procedures noted in the “Gate Operator and Canadian Programming” section for Canadian residents.

4. The indicator light will flash slowly and then rapidly. Release both

buttons when the indicator light flashes rapidly. (The rapid flashing light indicates acceptance of the hand-held transmitters’ radio frequency signals.)

5. Press and hold the just-trained HomeLink威 button and observe the

indicator light. If the light is constant, programming is complete and your device should activate when the HomeLink威 button is pressed and released. Note: To program the remaining two HomeLink威 buttons, begin with Step 2 in the “Programming” section — do not repeat Step 1.

Note: If the indicator light blinks rapidly for two seconds and then turns to a continuous light, proceed with steps 6 through 8 to complete programming of a rolling code equipped device.

6. At the garage door opener receiver (motor-head unit) in the garage,

locate the “learn” or “smart” button (usually near where the hanging antenna wire is attached to the unit).

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 79

Driver Controls

7. Press and release the “learn” or “smart” button. (The name and color

of the button may vary by manufacturer.)

Note: There are 30 seconds in which to initiate Step eight.

8. Return to the vehicle and firmly press, hold for two seconds and

release the HomeLink威 button. Repeat the press/hold/release sequence again, and, depending on the brand of the garage door opener (or other rolling code equipped device), repeat this sequence a third time to complete the programming.

HomeLink威 should now activate your rolling code equipped device. To program additional HomeLink威 buttons begin with Step 2 in the “Programming” section. For questions or comments, please contact HomeLink at www.homelink.com or 1–800–355–3515.

Gate Operator & Canadian Programming

During programming, your hand-held transmitter may automatically stop transmitting — not allowing enough time for HomeLink威 to accept the signal from the hand-held transmitter.

After completing steps 1 and 2 outlined in the “Programming” section, replace Step 3 with the following:

Note: If programming a garage door opener or gate operator, it is advised to unplug the device during the “cycling” process to prevent overheating.

• Continue to press and hold the HomeLink威 button (note Step 3 in the “Programming” section) while you press and release — every two seconds (“cycle”) your hand-held transmitter until the frequency signal has been accepted by the HomeLink威. The indicator light will flash slowly and then rapidly after HomeLink威 accepts the radio frequency signal.

• Proceed with Step 4 in the “Programming” section.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 80

Driver Controls

Operating the HomeLink姞 Wireless Control System

To operate, simply press and release the appropriate HomeLink威 button. Activation will now occur for the trained product (garage door, gate operator, security system, entry door lock, or home or office lighting etc.). For convenience, the hand-held transmitter of the device may also be used at any time. In the event that there are still programming difficulties, contact HomeLink威 at www.homelink.com or 1–800–355–3515.

Erasing HomeLink姞 buttons

To erase the three programmed buttons (individual buttons cannot be erased):

• Press and hold the two outer HomeLink威 buttons until the indicator light begins to flash-after 20 seconds. Release both buttons. Do not hold for longer that 30 seconds.

HomeLink威 is now in the train (or learning) mode and can be programmed at any time beginning with Step 2inthe“Programming” section.

Reprogramming a single HomeLink姞 button

To program a device to HomeLink威 using a HomeLink威 button previously trained, follow these steps:

1. Press and hold the desired HomeLink威 button. Do NOT release the

button.

2. The indicator light will begin to flash after 20 seconds. Without

releasing the HomeLink威 button, follow Step 2 in the “Programming” section.

For questions or comments, contact HomeLink威 at www.homelink.com or 1–800–355–3515.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 81

Driver Controls

ELECTRONIC COMPASS/TEMPERATURE DISPLAY (IF EQUIPPED)

OUTSIDE AIR TEMPERATURE

The outside temperature display is contained in the instrument cluster and displays all the time. If equipped with the DEATC climate control system, the outside temperature will be displayed there. For more information, refer to Dual automatic temperature control (DATC) in the Climate Controls chapter

To turn the display off or change the display from English to metric see your dealer.

Compass

The compass reading may be affected when you drive near large buildings, bridges, power lines and powerful broadcast antennas. Magnetic or metallic objects placed in, on or near the vehicle may also affect compass accuracy.

Usually, when something affects the compass readings, the compass will correct itself after a few days of operating your vehicle in normal conditions. If the compass still appears to be inaccurate, a manual calibration may be necessary. Refer to Compass calibration adjustment in this section.

Most geographic areas (zones) have a magnetic north compass point that varies slightly from the northerly direction on maps. This variation is four degrees between adjacent zones and will become noticeable as the vehicle crosses multiple zones. A correct zone setting will eliminate this error. Refer to Compass zone adjustment in this section.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 82

Driver Controls

Compass zone adjustment

1. Determine which magnetic zone

you are in for your geographic location by referring to the zone map.

2. Turn ignition to the ON position.

3. Locate compass sensor mounted

at base of mirror.

4. Press the button on the top of

the compass module until ZONE appears in the instrument cluster display.

5. Release pressure on the button and then slowly press it down again.

6. Continue to press until ZONE

appears in the instrument cluster display, then release. The display should show the current zone number.

7. Press until the desired zone

number appears. The display will flash and then return to normal operation. The zone is now updated.

123

6 7 8 9 1011

14 13

Compass calibration adjustment

Perform this adjustment in an open area free from steel structures and high voltage lines:

For optimum calibration, turn off all electrical accessories (heater/air conditioning, wipers, etc.) and make sure all vehicle doors are shut.

1. Start the vehicle.

2. Locate compass sensor mounted at base of mirror.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 83

Driver Controls

3. Press the button on the top of

the compass module until ZONE appears in the instrument cluster display. Continue to hold down until ZONE disappears and CAL is displayed (approximately eight seconds) and release.

4. Drive the vehicle slowly (less than 5 km/h [3 mph]) in circles until

CAL indicator turns off (4–5 complete circles).

5. The compass is now calibrated.

MESSAGE CENTER (IF EQUIPPED)

With the ignition in the ON position, the message center, located on your instrument cluster, displays important vehicle information

through a constant monitor of vehicle systems. You may select

display features on the message center for a display of status preceded by a brief indicator chime. The system will also notify you of potential vehicle problems with a display of system warnings followed by a long indicator chime.

Selectable features

Reset

Press this control to select and reset functions shown in the INFO menu and SETUP menu.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 84

Driver Controls

Info menu

This control displays the following control displays:

• Odometer/Compass

• Trip odometer/Odometer/Compass

• Average Fuel Economy

• Trip Elapsed Drive Time

• Distance to Empty

Odometer/Trip odometer

Refer to Gauges in the Instrument Cluster chapter.

Compass display

The compass reading may be affected when you drive near large buildings, bridges, power lines and powerful broadcast antenna. Magnetic or metallic objects placed in, on or near the vehicle may also affect compass accuracy.

Compass zone/calibration adjustment

Perform this adjustment in an open area free from steel structures and high voltage lines.

For optimum calibration, turn off all electrical accessories (heater/air conditioning, wipers, etc.) and make sure all vehicle doors are shut.

1. Turn ignition to the ON position.

2. Start the engine.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 85

Driver Controls

3. Determine your magnetic zone by

referring to the zone map.

4. From Info menu, select the

Compass/Odometer function. (Do not select Trip, DTE, or AFE. The top of the message center must be blank).

5. Press and hold the RESET and

SETUP control until the message center display changes to show the current zone setting.

6. Release the RESET AND SETUP

control, then slowly press RESET down again.

7. Press the SETUP control

repeatedly until the correct zone setting for your geographic location is displayed on the message center. To exit the zone setting mode press and release the RESET control.

8. Press the RESET control to start

the compass calibration function.

123

6 7 8 9 1011

14 13

9. Slowly drive the vehicle in a

circle (less than 3 mph [5 km/h]) until the CIRCLE SLOWLY TO CALIBRATE indicator changes to CALIBRATION COMPLETED. This will take up to three circles to complete calibration.

10. The compass is now calibrated.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 86

Driver Controls

Average fuel economy (AFE)

Select this function from the INFO menu to display your average fuel economy in miles/U.S. gallon or liters/100 km.

If you calculate your average fuel economy by dividing gallons of fuel used by 100 miles traveled (kilometers traveled by liters used), your figure may be different than displayed for the following reasons:

• Your vehicle was not perfectly level during fill-up

• Differences in the automatic shut-off points on the fuel pumps at

service stations

• Variations in top-off procedure from one fill-up to another

• Rounding of the displayed values to the nearest 0.1 gallon (liter)

1. Drive the vehicle at least 8 km (5 miles) with the speed control

system engaged to display a stabilized average.

2. Record the highway fuel economy for future reference.

It is important to press the RESET control after setting the speed control to get accurate highway fuel economy readings.

Average fuel economy for FFV-equipped vehicles

Upon refueling, your vehicle needs to determine the percentage of Ethanol in the fuel. For the first several minutes, or few miles of driving, the message “COMPUTING FUEL” may appear in the message center. The correct fuel economy will appear in the message center following calculation.

Trip elapsed drive time

Select this function from the INFO menu to display a timer.

To operate the Trip Elapsed Drive Time perform the following:

1. Press and release RESET in order

to start the timer.

2. Press and release RESET to pause the timer.

3. Press and hold RESET for 2 seconds in order to reset the timer.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 87

Driver Controls

Distance to empty (DTE)

Selecting this function from the INFO menu estimates approximately how far you can drive with the fuel remaining in your tank under normal driving conditions. Remember to turn the ignition OFF when refueling to allow this feature to correctly detect the added fuel.

The DTE function will display LOW FUEL LEVEL and sound a tone for one second when you have approximately 50 miles (80 km) to empty. If you RESET this warning message, this display and tone will return within 10 minutes.

DTE is calculated using a running average fuel economy, which is based on your recent driving history of 500 miles (800 km). This value is not the same as the average fuel economy display. The running average fuel economy is reinitialized to a factory default value if the battery is disconnected.

Distance to empty for FFV-equipped vehicles

Upon refueling, your vehicle needs to determine the percentage of Ethanol in the fuel. For the first several minutes, or few miles of driving, the message “COMPUTING FUEL” may appear in the message center. The correct distance to empty will appear in the message center following calculation.

Setup menu

Press this control for the following displays:

• Autolock

• Easy Entry/Exit

• Autolamp Delay

• Oil Change

• Language

• Units (English/Metric)

• System Check

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 88

Driver Controls

Autolocks

1. Select this function from the

SETUP control for the current display mode.

2. Press the RESET control to turn

the autolocks ON or OFF.

Easy entry/exit (if equipped)

1. Select this function from the

SETUP control for the current display mode.

2. Press the RESET control to turn

the easy entry/exit feature ON or OFF. For more information refer to Memory Seat/Adjustable Pedals/ Easy entry/exit feature in the Seating and Safety Restraints chapter.

Autolamp delay (if equipped)

1. Select this function from the

SETUP control for the current display mode.

2. Press the RESET control to select

the autolamp delay time.

Oil Change

1. Select this function from the

SETUP control for the current display mode.

2. Press the RESET control to reset

oil change.

Language

1. Select this function from the

SETUP menu for the current language to be displayed.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 89

Driver Controls

2. Pressing the RESET control

cycles the message center through each of the language choices.

3. Press and hold the RESET

control to set the language choice.

Units (English/Metric)

1. Select this function from the

SETUP menu for the current units to be displayed.

2. Press the RESET control to

change from English to Metric.

System check

Selecting this function from the SETUP menu causes the message center to cycle through each of the systems being monitored. For each of the monitored systems, the message center will indicate either an OK message or a warning message for three seconds.

Pressing the RESET control cycles the message center through each of the systems being monitored.

The sequence of the system check report and how it appears in the message center is as follows:

1. FUEL LEVEL

2. WASHER FLUID LEVEL

3. OIL LIFE IN XX%

4. ADVTRAC

5. ENGINE TEMP

6. OIL PRESSURE

7. TIRE PRESSURE SYSTEM (if equipped)

8. BRAKE FLUID LEVEL

9. CHARGING SYSTEM

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 90

Driver Controls

System warnings

System warnings alert you to possible problems or malfunctions in your vehicle’s operating systems.

In the event of a multiple warning situation, the message center will cycle the display to show all warnings by displaying each one for several seconds.

The message center will display the last selected feature if there are no more warning messages. This allows you to use the full functionality of the message center after you acknowledge the warning by pressing the RESET control and clearing the warning message.

Warning messages that have been reset are divided into three categories:

• They will reappear on the display every minute from the reset.

• They will reappear on the display ten minutes from the reset.

• They will not reappear until an ignition OFF-ON cycle has been

completed.

This acts as a reminder that these warning conditions still exist within the vehicle.

Warning display Status

Check engine temperature Warning returns after 10 minutes Transmission overheated Check transmission Low fuel level Check fuel cap Check charging system Low brake fluid level Low oil pressure Warning-tire very low (if

equipped) ETC-engine failsafe mode

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 91

Driver Controls

Warning display Status

Check tire pressure (if equipped)

Tire pressure monitor fault (if equipped)

Tire pressure sensor fault (if equipped)

Check AdvanceTrac娂 (if equipped)

Advtrac off t/c on (if equipped) Low washer fluid level Door ajar Change oil soon Oil change required

CHECK ENGINE TEMPERATURE. Displayed when the engine coolant is overheating. Stop the vehicle as soon as safely possible, turn off the engine and let it cool. Check the coolant and coolant level. Refer to Engine coolant in the Maintenance and Specifications chapter. If the warning stays on or continues to come on, contact your dealer as soon as possible.

TRANSMISSION OVERHEATED. Indicates the transmission is overheating. This warning may appear when towing heavy loads or when driving in a low gear at a high speed for an extended period of time. Stop the vehicle as soon as safely possible, turn off the engine and let it cool. Refer to Transmission fluid in the Maintenance and Specifications chapter. If the warning stays on or continues to come on, contact your dealer for transmission service as soon as possible.

CHECK TRANSMISSION. Indicates the transmission is not operating properly. If this warning stays on, contact your dealer as soon as possible.

LOW FUEL LEVEL. Displayed as an early reminder of a low fuel condition.

CHECK FUEL CAP. Displayed when the fuel filler cap is not properly installed. Check the fuel filler cap for proper installation. Refer to Fuel filler cap in the Maintenance and Specifications chapter.

ETC-ENGINE FAILSAFE MODE. Displayed when the engine has defaulted to a “limp-home” operation. If the warning stays on or continues to come on, contact your dealer as soon as possible.

Warning returns after the ignition key is turned from OFF to ON.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 92

Driver Controls

CHECK CHARGING SYSTEM. Displayed when the electrical system is not maintaining proper voltage. If you are operating electrical accessories when the engine is idling at a low speed, turn off as many of the electrical loads as possible. If the warning stays on or comes on when the engine is operating at normal speeds, have the electrical system checked as soon as possible.

LOW BRAKE FLUID LEVEL. Indicates the brake fluid level is low and the brake system should be inspected immediately. Refer to Checking and adding brake fluid in the Maintenance and Specifications chapter.

LOW OIL PRESSURE. Displayed when the engine oil level is low. If this warning message is displayed, check the level of the engine oil. Refer to Engine oil in the Maintenance and Specifications chapter for information about adding engine oil.

WARNING-TIRE VERY LOW (if equipped). Displayed when one or more road tires on your vehicle have very low pressure. When this warning message is displayed, a warning chime will sound reminding you to stop the vehicle as soon as safely possible to check your tires for proper air pressure, leaks and damage. Refer to Inspecting and Inflating Your Tires in the Tires, Wheels and Loading chapter.

CHECK TIRE PRESSURE (if equipped).Displayed when one or more tires on your vehicle have low tire pressure. Refer to Inspecting and Inflating Your Tires in the Tires, Wheels and Loading chapter.

TIRE PRESSURE MONITOR FAULT (if equipped). Displayed when the Tire Pressure Monitoring System is malfunctioning. If the warning stays on or continues to come on, have the system inspected by your servicing dealership.

TIRE PRESSURE SENSOR FAULT (if equipped). Displayed when a tire pressure sensor is malfunctioning, or your spare tire is in use. For more information on how the system operates under these conditions, refer to Understanding Your Tire Pressure Monitoring System in the Tires, Wheels and Loading chapter. If the warning stays on or continues to come on, have the system inspected by your servicing dealership.

LOW WASHER FLUID LEVEL. Indicates the washer fluid reservoir is less than one quarter full. Check the washer fluid level. Refer to Windshield washer fluid in the Maintenance and Specifications chapter.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 93

Driver Controls

CHECK ADVANCETRAC娂 (if equipped). Displayed when the AdvanceTrac娂 system is not operating properly. If this message is displayed on the message center the AdvanceTrac娂 system will be partially operable. If this warning stays on while the engine is running, contact your dealer for service as soon as possible. For further information, refer to AdvanceTrac娂 stability enhancement system in the Driving chapter.

ADVTRAC OFF T/C ON (if equipped). Displayed on 4x4 vehicles only when 4x4 Low Range is selected. In this mode, the stability enhancement portion of the AdvanceTrac娂 is disabled, but the traction enhancement feature remains enabled. For further information, refer to AdvanceTrac娂 stability enhancement system in the Driving chapter.

DOOR AJAR. Displayed when a door or liftgate is not completely closed.

CHANGE OIL SOON/OIL CHANGE REQUIRED. Displayed when the engine oil life remaining is 5 percent or less. When oil life left is between 5% and 0%, the CHANGE OIL SOON message will be displayed. When oil life left reaches 0%, the OIL CHANGE REQUIRED message will be displayed.

An oil change is required whenever indicated by the message center and according to the recommended maintenance schedule. USE ONLY RECOMMENDED ENGINE OILS.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 94

Driver Controls

To reset the oil monitoring system to 100% after each oil change [approximately 5,000 miles (8,000 km) or 180 days] perform the following:

1. Press and release the SETUP

control to display “PRESS RESET AT OIL CHANGE”.

2. Press and release the RESET

control to display “HOLD RESET TO CONFIRM”.

3. Press and hold the RESET

control for 2 seconds and release. Oil life is set to 100% and “OIL LIFE SET TO 100%” is displayed.

After you have done steps 1 through 3, you can reset the oil monitoring system to your personalized oil life %:

4. Press RESET and SETUP

controls at the same time for 2 seconds, to activate a service mode which will display “OIL LIFE XX% RESET TO ALTER”.

5. Press RESET to decrement oil life by 10% down to 30% and back to

100%.

6. With your personalized OIL LIFE XX% displayed, press SETUP to

continue the system check.

DATA ERR. These messages indicate improper operation of the vehicle network communication between electronic modules.

• Fuel computer

• Oil life

• Charging system

• Door sensor

• Washer fluid

• Brake fluid

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 95

Driver Controls

• Compass

• Outside temperature

• Engine sensor

Contact your dealer as soon as possible if these messages occur on a regular basis.

POSITIVE RETENTION FLOOR MAT

Position the driver floor mat so that the eyelet is over the pointed end of the retention post and rotate forward to lock in. Make sure that the mat does not interfere with the operation of the accelerator or the brake pedal. To remove the floor mat, reverse the installation procedure.

REAR LIFTGATE

The liftgate area is only intended for cargo, not passengers. You can open and close the liftgate from outside the vehicle. It cannot be opened from inside the cargo area.

• To open the liftgate window, press the control on the remote entry key fob or, with the liftgate unlocked, push the control button on the right side under the license plate lamp shield.

• To open the liftgate, unlock the liftgate (with the power door locks, the remote entry or the keyless entry pad) and pull the middle lever under the license plate lamp shield.

To lock the liftgate and the liftgate window, use the power door locks or press the door lock switch on the left side of the cargo area. To manually lock or unlock the liftgate, move the button located below the window down or up.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 96

Driver Controls

The liftgate door and window should be closed before driving. If not, possible damage may occur to your vehicle.

Always close liftgate window before opening liftgate. Liftgate

glass and liftgate should never be open at the same time. Failure to observe this warning may result in personal injury or damage to your vehicle.

Make sure the liftgate door and/or window are closed to prevent

exhaust fumes from being drawn into the vehicle. This will also reduce the risk of passengers and cargo falling out.

CARGO COVER (IF EQUIPPED)

Your vehicle may be equipped with a cargo area cover that covers the luggage compartment of your vehicle.

To install the cover:

Push both ends of the cover into the depressions (right side first) in the trim panels behind the second row seat.

To reduce the risk of

injuries, the cargo area cover must be properly installed on the rear trim panels.

Do not place any objects on the cargo area cover. They may

obstruct your vision or strike occupants of the vehicle in the case of a sudden stop or collision.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 97

Driver Controls

Cargo management system

The cargo management system consists of storage compartments located in the floor of the rear cargo area.

7 passenger stowage:

1. To open, lift the release handle and the lid.

2. To close, lower the lid, lift the release handle and press down on the lid.

5 passenger stowage:

When the lid is open, it will stand up on its own.

1. To open, lift the release handle and the lid.

2. To close, lower the lid, lift the release handle and press down on the lid.

LUGGAGE RACK

Your vehicle is equipped with a roof rack. The maximum recommended load is 200 lbs (90 kg), evenly distributed. If it is not possible to distribute the load, position it as far rearward as possible. Use the tie down loops on the thumbwheels (if equipped) to secure the load.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 98

Driver Controls

To adjust cross-bar position (if equipped):

1. Loosen the thumbwheel at both ends of the cross-bar (both cross-bars are adjustable).

2. Slide the cross-bar to the desired location.

3. Tighten the thumbwheel at both ends of the cross-bar.

Vehicles with a higher center of gravity such as utility and

four-wheel drive vehicles handle differently than vehicles with a lower center of gravity. Utility and four-wheel drive vehicles are not designed for cornering at speeds as high as passenger cars any more than low-slung sport cars are designed to perform satisfactorily under off-road conditions. Avoid sharp turns, excessive speed and abrupt maneuvers in these vehicles. Failure to drive cautiously could result in an increase risk of loss of vehicle control, vehicle rollover, personal injury and death.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 99

Locks and Security

KEYS

One key operates all the locks and starts the vehicle. Always carry a spare key with you in case of an emergency.

Your keys are programmed to your vehicle; using a non-programmed key will not permit your vehicle to start. If you lose your dealer supplied keys, replacement keys are available through your authorized dealer. Refer to the SecuriLock娂 passive anti-theft system section later in this chapter for more information.

POWER DOOR LOCKS

Press control to unlock all vehicle doors.

Press control to lock all vehicle doors.

Liftgate

An additional power door lock can be accessed by opening the liftgate. The button is located either on the top of the left-hand quarter trim panel underneath the rear window, or on the bottom of the left-hand quarter trim panel. Press this button to lock or unlock all the doors.

Smart unlocking feature

The smart unlocking feature helps prevent you from locking yourself out of the vehicle. With the key in any ignition position, the driver’s door will automatically unlock if it is locked using the power lock control on the driver’s door panel while the driver’s door is open.

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Page 100

Locks and Security

Childproof door locks

• When these locks are set, the rear doors cannot be opened from the inside.

• The rear doors can be opened from the outside when the doors are unlocked.

The childproof locks are located on rear edge of each rear door and must be set separately for each door. Setting the lock for one door will not automatically set the lock for both doors.

• Move lock control up to engage the childproof lock.

• Move control down to disengage childproof locks.

REMOTE ENTRY SYSTEM

This device complies with part 15 of the FCC rules and with RS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The typical operating range for your remote entry transmitter is approximately 33 feet (10 meters). A decrease in operating range could be caused by:

• weather conditions,

• nearby radio towers,

• structures around the vehicle, or

• other vehicles parked next to your vehicle.

100

REVIEW COPY 2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

FORD Explorer 2005 User Manual v.1

Specifications and Main Features

Frequently Asked Questions

User Manual

Table of Contents

Introduction

Instrument Cluster

Entertainment Systems

Climate Controls

Lights

Driver Controls

Locks and Security