Follett MCD425ABT User Manual
Model MCD425AHT on countertop ice and
beverage dispenser, supplied by others
Maestro Plus 425 series ice machine, 115V/60 Hz
1
Ice type For use with
ice and
beverage
Chewblet
Flake
† ENERGY STAR® certified
1
Ordered separately
dispener
(by others)
ice storage
bin
ice storage
bin
Condenser Item number
air MCD425AHT†
water
air MCD425ABT†
water MCD425WBT
air MFD425ABT†
water MFD425WBT
MCD425WHT
Maestro Plus
ice machine for foodservice applications
Features
Maestro Plus ice machine with up to 425lb(193.0 kg) daily
production of consumer preferred Chewblet or flake ice.
High performance Maestro Plus ice machines
- compact, reliable ice machine for top mount installation
- stainless steel evaporator, auger and top bearing
- oversized, heavy duty, tapered roller bearing ensures long
low-maintenance life
- automatic self-flushing of ice machine removesimpurities
- no noisy harvest cycles means quiet ice production
Lower utility bills
- energy-ecient, no costly defrost cycles
- 25% less energy than comparable capacity cube machines
- 40% less water than comparable capacity cube machines
Maintenance and service benefits
- cleaning and sanitizing of entire machine takes less than 1 hour
- LED control board provides at-a-glance machine status
Consumer-preferred Chewblet® ice (MCD models)
- preferred over cubes by more than 2:1
- easy to chew
- more reliable dispensing than nugget or pellet ice
- slow melting, maintains drink temperature and quality,
comparable to cubes
- higher displacement than cube ice
Flake ice (MFD models) is perfect for foodservice and
grocerydisplays
- cradles fish and vegetables without bruising
- securely supports salad bar containers without tipping
Installation flexibility
- Harmony™ kits allow ice machine to be top mounted on most
ice and beverage dispensers
- Harmony kits install without any alteration to dispenser (kit
includes stainless steel top)
- compatible with over 20 of Follett’s ice storage bins
Warranty
- 3 years parts and labor, 5 years compressor parts
1 Consumer study conducted by independent agency Roper ASW.
1
™
Job
Item
801 Church Lane | Easton, PA 18040, USA
1.800.523.9361 | 1.610.252.7301 | follettice.com
SafeCLEAN™ environmentally responsible ice machine cleaner
(item# 00132001)
Nu-Calgon IMS-III sanitizer, 16 oz bottle (item# 00979674)
Water filters (refer to form#6380, 9905, 6070)
Additional Maestro Plus accessories (refer to price list)
Specification for ice and beveragedispenser top
mount ice machines
W1 Width 22.70" (57.7 cm)
fits on 22.00" wide dispensers
D1 Depth 24.25" (61.6 cm)
H1 Height 21.25" (54.0 cm)
Service clearance 12.00" (30.5 cm) top -
nofrontobstructions
6.00" (15.24 cm) on exhaust side
(left, right and rear)
C1 Electrical
115 V/60/1
C2 Water inlet 3/8" FPT,
C3 Drain 3/4" MPT
Water-cooled ice machine
connections
Air temperature 50 -100 F (10 - 38 C)
Water temperature 45 - 90 F (7 - 32 C)
Potable water pressure 10 - 70 psi (69 - 483 kPa)
Condenser water pressure 10 - 125 psi (69 - 861 kPa)
Ice production at 70 F (21 C) air,
50 F (10 C) water
Ice production at 90 F (32 C) air,
70 F (21 C) water
Energy consumption
90 F (32 C) air; 70 F (21 C) water
Heat rejection air-cooled models – 5,000 BTU/hr
Water consumption 12.0 gal (45.4 L) of potable water per
Water flow requirement for
water-cooled condensers
Approximate ship weight 160 lb (73 kg)
NOTE: For indoor use only
SHORT FORM SPECIFICATION: Ice machine to be Follett model number
_________. Ice machine to be ______air- or ______water-cooled. Ice
machine production to be approximately 425 lb (193.0 kg) per day of
Chewblet ice at air temperature of 70 F (21 C), water temperature of 50 F
(10C). Ice machine to use environmentally responsible R404a refrigerant.
Ice machine to have stainless steel evaporator, auger and top bearings,
heavy-duty tapered roller bearing, and low-water safety circuit. NSF and
ETL listed.
11 amps, 0.8 kW
15 amp circuit
7' (2 m) cord, NEMA 5-15 plug
installation of an in line water
filtration system is recommended
water-cooled models require separate
condenser drains
C4 – 3/8" FPT condenser inlet
C5 – 3/8" FPT condenser drain
air-cooled models – 425 lb (193.0 kg)
water-cooled models – 443 lb (201.1 kg)
air-cooled models – 325 lb (147.6 kg)
water-cooled models – 372 lb (169.0 kg)
air-cooled models – 5.4 kWh
water-cooled models – 5.0 kWh
per 100lb (45.4 kg) ice
water-cooled models – 1,400 BTU/hr
to air, 3,600 BTU/hr to water
100lb (45.4 kg) of ice
0.25 gpm at 50 F (10 C)
0.5 gpm at 70 F (21 C)
1.25 gpm at 90 F (32 C)
Dimensional drawingAccessories
5.03"
5.03"
(12.8 cm)
W1
D2 =
Depth
in (cm)
H1
H2
D2
W1
C1
C2
2.34"
W1
2.34"
H2
Height
in (cm)
C3
C3
1
=
(5.94 cm)
2.324" (5.90 cm)
4.409" (11.20 cm)
C1
C5
C4
C2
(5.94 cm)
2.324" (5.90 cm)
4.409" (11.20 cm)
H1
Harmony
top kit
D1
W2
Back view —
C1
air-cooled, top mount
2.123" (10.78 cm)
15.22"
(38.65 cm)
(12.8 cm)
Back view —
C1
water-cooled, top mount
2.123" (10.78 cm)
15.22"
(38.65 cm)
Manufacturer/
Model number
Coca-Cola dispensers
Freestyle 7000 30.10 (76.5) 33.11 (84.1) 47.00 (119.4) MTF30SCP
Freestyle 9000 25.50 (64.8) 35.50 (90.2) 73.75 (187.3) MTF24SCP
Cornelius dispensers
DB/DF/ED150 series 22.0 (55.9) 30.0 (76.2) 34.38 ( 87.3) MTC22SCP
DB/DF/ED175 series 24.5 (62.2) 30.0 (76.2) 34.38 ( 87.4) MTC24SCP
DB/DF/ED200 series 30.0 (76.2) 30.0 (76.2) 34.38 ( 87.4) MTC30SCP
DB/DF/ED250 series 30.0 (76.2) 30.0 (76.2) 38.38 ( 97.5) MTC30SCP
Lancer dispensers
4500-22N, FS-22N 22.00 (55.9) 30.50 (77.5) 36.50 ( 92.7) MTL22SCP
4500-30N 30.00 (76.2) 30.50 (77.5) 36.50 ( 92.7) MTL30SCP
FS-30N 30.00 (76.2) 30.50 (77.5) 42.13 (107.0) MTL30SCP
Lancer Sensation 30.00 (76.2) 31.00 (78.7) 38.25 ( 97.2) MTL30SCP
Lancer Touchpoint 32.50 (82.6) 33.70 (85.6) 40.00 (101.6) MTL30SCP
Pepsi dispensers
Spire 3.0 27.00 (68.6) 35.00 (88.9) 38.12 ( 96.8) MTP24SCP
Spire 5.0 30.50 (77.5) 36.00 (91.4) 42.75 (108.6) MTP30SCP
1
Net height after installation of top kit
11.03"
(28.0 cm)
8.03"
(20.4 cm)
W2 =
Width
in (cm)
2
Form# 7015
Maestro Plus top mount foodservice
Loading...