Follett HCC700AHT User Manual

Features

Horizon Chewblet ice machine with up to
675lb(306kg) dailyproduction of customer preferred
Chewblet ice

- automatically transport ice through a tube with RIDE®
technology from up to 75' (22.8 m) away

- chewable, compressed nugget ice is preferred
over cubes

1

- Chewblet ice dispenses reliably from ice and
beveragedispensers

- available with approximately 1.00" (2.54 cm) long
standard Chewblet ice or optional 3/8" (0.95 cm)
long MicroChewblet

™

ice

- environmentally responsible R404a refrigerant with
zero ozonedepletion potential

- water and energy ecient

- quiet production without noisy harvest cycles

Durable, attractive ice machine

- regular bearing inspection or replacement is
not required

- easy-to-read LED operating status and
diagnostic display

- smooth contours for aesthetically
appealing appearance

Designed with sanitation in mind

- Agion® silver-based antimicrobial product protection
of key iceand water contact components

- aluminum-bronze evaporator has
antimicrobial properties

- automatic self-flushing reduces water scale buildup

- floatless, sealed design inhibits formation of biofilms

- semi-automatic cleaning and sanitizing system

Certifications

Warranty

- 3 years parts and labor, 5 years compressor parts

1 Independent third party studies. Contact Follett for details.
2 Disclaimer: Antimicrobial protection is limited to the treated components and does not treat water or ice.

™

Horizon

self-contained 700 series Chewblet® ice machine

Short form specification:

Ice machine to be a Follett® Horizon Chewblet ice machine model ________________
[Insert size/series,condenser type and installation/mounting, from model number
guide] self contained 700 self contained air-cooled selfcontained water-cooled
capable of producing compressed nugget ice using an ecient, sanitary horizontal
evaporator/auger system and delivering ice by a flexible wire reinforced transport
tube to ice storage bin, iceand water dispenser, ice and beverage dispenser,

drop-in dispenser and provided with a stainless steel frame and exterior, slide­out compressor/condenser with utility docking station, front-mounted unit status
display, automatic self-flush, and semi-automatic cleaning and sanitizing system,
plusall the featureslisted:

Horizon self contained 700 series ice machine

Install/

For use with

ice storage
bin

Follett
Vision
dispenser

ice and
beverage
dispenser
(by others)

drop-in
dispenser
(by others)

† ENERGY STAR® certified

1

Ordered separately

2

Requires Harmony™ top kit (see page 4)

NOTE: For Micro Chewblet ice, replace second character (C) with
an M e.g. HMD700ABT

1

mount Condenser V/Hz/Ph Item number

115/60/1

air

top
mount

water

air

RIDE

water

air

™

RIDE

water

air

top
mount

water

air

RIDE

water

air

RIDE

water

208-230/60/1
230/50/1
115/60/1
208-230/60/1
230/50/1
115/60/1
208-230/60/1
230/50/1
115/60/1
208-230/60/1
230/50/1
115/60/1
208-230/60/1
230/50/1
115/60/1
208-230/60/1
230/50/1
115/60/1
208-230/60/1
230/50/1
115/60/1
208-230/60/1
230/50/1
115/60/1
208-230/60/1
230/50/1
115/60/1
208-230/60/1
230/50/1
115/60/1
208-230/60/1
230/50/1
115/60/1
208-230/60/1

230/50/1

HCD700ABT†
HCC700ABT†
HCE700ABT
HCD700WBT
HCC700WBT
HCE700WBT
HCD700ABS†
HCC700ABS†
HCE700ABS
HCD700WBS
HCC700WBS
HCE700WBS
HCD700AVS†
HCC700AVS†
HCE700AVS
HCD700WVS
HCC700WVS
HCE700WVS
HCD700AHT 2†
HCC700AHT2†
HCE700AHT2†
HCD700WHT2†
HCC700WHT2†
HCE700WHT2†
HCD700AHS†
HCC700AHS†
HCE700AHS
HCD700WHS
HCC700WHS
HCE700WHS
HCD700AJS†
HCC700AJS†
HCE700AJS
HCD700WJS
HCC700WJS

HCE700WJS

Job
Item

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com

Accessories

Harmony conversion top kit for ice and beverage dispensers

(listed onpage 4)

Water filter kit (item# 00978957 – see form# 9905 for details)

Carbonless water filter kit (item# 01050442 – see form# 6380

for details)

Wall mount bracket (item# 00997098)
Ice machine stand, height-adjustable (item#00997080)
Timer to control one or two Horizon ice machines (item#00967265)
Longer ice transport tube (10'/3 m is standard) – Specify length:

____ft/m in 5'/1.5 m increments

Nu-Calgon® IMS-III sanitizer, 16 oz bottle (item# 00979674)
SafeCLEAN™ environmentally responsible ice machine cleaner

(item#00132001)

Specification

W1 Width 22.70" (57.7 cm)

Fits on 22.00" wide dispensers

D1 Depth 24.25" (61.6 cm)
H1 Height 21.25" (54.0 cm)

Ventilation clearance
air-cooled models only

C1 Electrical
115 V/60/1 – HCD700 models

C2 Electrical
208-230 V/60/1 – HCC700 models

C3 Electrical
230 V/50/1 – HCE700 models

C4 Ice transport tube see page 7 for details
C5 Water inlet 3/8" OD push-in water inlet
C6 Drain 3/4" MPT - vented T required
C7 Ice bin signal cord for Vision applications only

Water-cooled ice machine
connections

Air temperature 50 -100 F (10 - 38 C)
Water temperature 45 - 90 F (7 - 32 C)
Potable water pressure 10 - 70 psi (69 - 483 kPa)
Condenser water pressure 30 - 150 psi (207-1034 kPa)
Ice production see ice production charts on page 8
Energy consumption

90 F (32 C) air,
70 F (21C) water

Heat rejection - HCC & HCD models air-cooled models – 8,850 BTU/hr,

Heat rejection - HCE models air-cooled models – 6,200 BTU/hr

Water consumption 12 gal (45.4 L) of potable water per

Water flow requirement for
water-cooled models

Approximate ship weight 190 lb (86.2 kg)
NOTE: For indoor use only

2

Form# 4095

topmount–1.00"(2.54 cm)
RIDE – See page 5-6 for details

6.5 amps, requires dedicated
15 amp circuit,

6.5' (2 m) cord, NEMA 5-15 plug.

7.0 amps, requires dedicated 15 amp
circuit,

6.5' (2 m) cord, NEMA 6-15 plug.

7.0 amps, requires dedicated 15 amp
circuit, 6.5' (2 m) cord only.
Separate circuits required for each
ice machine.

C8 – 1/4" FPT condenser inlet
C9 – 1/4" FPT condenser outlet

air-cooled models – 5.2 kWh
water-cooled models – 3.9 kWh
per 100lb(45.4 kg) ice

water-cooled models – 10,150 BTU/hr
to water

water-cooled models – 7,110 BTU/hr
to water

100lb (45.4 kg) of ice (per AHRI test
standards) 12.5 gal (47.3 L) including
periodic flushing

140 gallons/100 lb of ice
(530L/45.4kg), 0.5 gallons
perminute

Dimensional drawing

air

intake

W1

C1 C2

G

HCD700A/W

(22.86 cm)

(8.36 cm)

G

HCC700A/W

2.56"

(6.50 cm)

9.00"

3.29"

C5

C6

7.12"

(18.08 cm)

9.12"

(23.16 cm)

Self-contained 700 series ice machine

C3

C7

C8

C9

D1

H1

C4

2.75"

(6.99 cm)

1 – Locating the ice machine

Horizon self-contained Chewblet ice machines allow top-mounting or mounting in a base cabinet, on a wall or on a floor
stand up to 75' (22.8 m) from the dispenser or ice bin with RIDE technology. In-cabinet mounting (RIDE applications)
require special attention to service access, unit ventilation and ice tube runs (see pages 4-7).

Top mounting – ice and beverage
dispensers (by others)

RIDE model – Follett low-profile
Vision ice and beverage dispensers

Top mount on
Follett ice storage bins

Important specifier notes: Important specifier notes: Important specifier notes:

1. Dispenser must be compatible with
nugget ice. See page 4 for compatible ice
and beverage dispenser models and top
kit numbers.

2. Verify ceiling or soffit height to ensure
sufficient top clearance.

RIDE model – ice and beverage
dispensers (by others)

1. See pages 4-6 for critical clearance and
venting requirements.

2. Ice transport tube shipped with Vision
ice and beverage dispenser (Vision
applications only).

RIDE model – drop-in beverage
dispensers (by others)

1. See form# B300 for bin sizing.

2. Verify ceiling or soffit height to ensure
topclearance.

3. Locate floor sink or grate and drains in
front of storage bin.

4. Do not position bin drain lines to block
Ice•DevIce

™

bin cart.

RIDE model –
Follett ice storage bins

Important specifier notes: Important specifier notes: Important specifier notes:

1. See pages 4-6 for critical clearance and
venting requirements.

2. Dispenser must be compatible with
nugget ice. Compatible dispensers
include Servend MD150/175/200/250,
SV175/200/250, MDH-402, and Follett
Symphony Plus™ 110CM as well as the
dispensers listed on page 4.

3. Top kit MSF30SC required with Coca-Cola
Freestyle 7000. Adapter 0002832 must
also be ordered from Coca-Cola.

4. RIDE application is approved only for Pepsi
Spire 3.0 and 5.0 designed for top mount
ice machines and requires MSP24SC
for 3.0 and MSP30SC for 5.0, ordered
separately. For manual fill versions of
PepsiSpire 3.0 and 5.0, contact factory.

1. See pages 4-6 for critical clearance and
venting requirements.

2. Compatible with the following dispensers:
Cornelius 1522, 1722, 2323 and Lancer
2200, 2300, 23300.

3. Requires 12.00" (30.5 cm) of access space
for installation on transport tubeside.

1. See form# B300 for bin sizing.

2. Locate floor sink or grate and drains in
front of storage bin.

3. Do not position bin drain lines to block
Ice•DevIce bin cart.

Form# 4095

3