Follett HCC1010WHM, HCD710ABS Installation Manual

Horizon Elite™ Ice Machine Models with RIDE™ Technology

Installation Instructions for Ice Storage Bins

HMD/HCD710ABS, HCC1010ABS, HMC1010ABS, HCC1410ABS, HMC1410ABS,
HCC1010WBS, HMC1010WBS, HCC1410WBS, HMC1410WBS,
HCE1010ABS, HME1010ABS, HCE1410ABS, HME1410ABS,
HCE1010WBS, HME1010WBS, HCE1410WBS, HME1410WBS

(See model number congurator on page 2 for details.)

Order parts online
www.follettice.com

self-contained

801 Church Lane • Easton, PA 18040, USA
Toll free [phone] • [phone]
www.follettice.com

01113240R02

Chewblet® Ice Machine Model Number Configurations

HC 1810D SVA

CondenserSeriesVoltageIcemaker

MC Maestro™

Chewblet
(425 Series)

HC Horizon

Chewblet
(710, 1010,
1410, 1810,
2110 Series)

HM Horizon

Micro Chewblet

C 208-230/60/1 (icemaking head)

®

Self-contained only.

D 115/60/1 (icemaking head)

Self-contained and remote. If remote
unit, high side is 208-230/60/1.

E 230/50/1 (icemaking head)

Self-contained only.

F 115/60/1 (icemaking head)

Remote only. High side is
208-230/60/3.

425 up to

425 lbs
(193 kg)

710 up to

675 lbs
(306 kg)

1010 up to

1061 lbs
(482 kg)

1410 up to

1466 lbs
(665 kg)

1810 up to

1790 lbs
(812 kg)

2110 up to

2039 lbs
(925 kg)

A Air-cooled, self-contained
W Water-cooled, self-contained
R Air-cooled, remote condensing unit
N Air-cooled, no condensing unit for

connection to parallel rack system

V Vision™
H Harmony™
B Ice storage bin
J Drop-in
M Ice Manager

diverter valve
system

P Cornelius Profile

PR150

S RIDE™

T Top-mount

CAUTION!

§ This appliance should be connected by a qualied person in accordance with applicable codes.

§ If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard.

§ Connect to potable water supply only.

§ This appliance can be used by children aged 8 years and above and persons with reduced physical,
sensory, or mental capabilities, or lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children
should be supervised to ensure that they do not play with the appliance.

§ This appliance is intended to be used for household and similar applications such as staff kitchen areas
in shops, offices and other working environments; farm houses and by clients in hotels, motels and other
residential type environments; bed and breakfast type environments; catering and similar non-retail
applications.

§ WARNING! To avoid a hazard due to instability of the appliance, it must be xed in accordance with the
instructions.

ConfigurationApplication

(RIDE remote
ice delivery
equipment)

2

self-contained BIN • RIDE Technology

Read and complete the following 8 installation steps

Site preparationUnpack

21

Bin preparation

43

Ice transport tube

5 6

87

Louvered docking assembly

External connection

Front coverInternal connection

BIN • RIDE Technology self-contained

3

Carefully unpack and inspect the contents of your Follett ice machine.

Unpack

1

1. 1

Unpack ice machine

➊

➍

➋

7/16"

➌

➎

DO NOT TILT ICE MACHINE
TO ACCESS BOLTS!

7/16"

➏

4

COMPRESSOR DAMAGE
WILL RESULT

➐

self-contained BIN • RIDE Technology

Prepare the installation site.

➊

➋

➌

➍

requires 15A circuit,

1.50 mm

2

wire

H_E1410A/W

‡

requires 20A circuit,

4.00 mm

2

wire

2 ft. x 1" OD
silicone tubing
and ttings
provided

1/4" per foot
(6,4 mm per 0,3 m)

H_C1410A/W

H_C1010A/W

NEMA

6-20

NEMA

6-15

H_D710A

NEMA

5-15

H_C1010A/W

*

Provide drainage, water supply and electrical power to within 6 feet (2m)
of ice machine in accordance with local and national codes. Outdoor
installation is not recommended and will void warranty.

Site preparation

2

2.1

2.1

Installation site requirements

Electrical

➊

• H_C1010/1410(A/W)BS 208-230/60 • H_D710ABS 115/60

‡

• H_E1010/1410(A/W)BS 230/50

(H_E1010A/W requires 15A dedicated circuit 1.50 mm2 wire, H_E1410A/W requires 20A dedicated circuit 4.00 mm2 wire)

‡ Plug must be provided by end user & must conform to standard EN 60 335-2-24 of the end destination.

Potable water supply

(3/8” push-in internal connection, 3/8” OD tubing required)

➋

Requires dedicated 15A circuit.

• 10-70 psi (69-483kpa)

• 45 to 90 F (7 to 32 C)

• Follett recommends the use of an in-line water ltration system (item# 00130286)

• This equipment is to be installed with adequate backow protection to comply with applicable

federal, state, and local codes

Condenser water supply for water-cooled systems

• 10 psi min.; 150 psi max. (69kpa min.; 1034kpa max.)

• 45 to 90 F (7 to 32 C)

• 1.5 gallons per minute (5.68 liters per minute)

Drain

➍

(3/4” Barb)

• Minimum 8” radius on silicone drain line. Drain line from the ice machine must have at least
1/4” per foot pitch (6,4mm/0,3m).

BIN • RIDE Technology self-contained

(1/4” FPT inlet, 1/4” FPT outlet)

➌

5

Prepare the bin

Bin preparation

3

3.1

• Remove protective tape from gaskets

Bin top preparation

3.2

Bin top preparation

➋

➊

➊

• Apply gaskets

• Install shuttle actuator
dispenser top and secure with locking nut

➊

through

➋

➌

➌

6

self-contained BIN • RIDE Technology

Install the louvered docking assembly.

BEFORE PROCEEDING

Prior to installing the louvered docking assembly, ensure that the
drain tting is oriented (right or left) correctly for your installation.
An optional straight drain tting is also supplied. You may need to
remove the back panel of the docking assembly in order to re-orient
or change the drain tting. Replace back panel prior to mounting the
docking assembly.

Wall bracket accessory Machine stand accessory

Louvered docking assembly

4

• Mount louvered docking assembly to wall
bracket accessory

• Mount louvered docking assembly to
machine stand accessory

BIN • RIDE Technology self-contained

7

Install the ice transport tube.

Ice transport tube

5

5.1

Ice transport tube installation

➍

➏

➐

➋

Hot Water

160 F (71 C)

➎

➑

➒

➊

1/4˝ (6,4mm)

1' (0,3m)

➌

Ice transport tube tips

• Insulate entire length of ice transport tube

• Secure ice transport tube ➋ as needed to prevent dips and traps from forming. For long tube
runs see guide on page 14.

• Pitch ice transport tube at least 1/4" per foot (6,4mm/.3m)

• Ice transport tube must drain towards ice machine

➊

➌

➓

Ice transport tube to bin

• Be sure tube ends are square

• Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers ➎
before making connection to ease assembly

• Push ice transport tube onto ice machine nipple

• Install hose clamp

Ice transport tube to Ice machine

• Be sure tube ends are square

• Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers ➎
before making connection to ease assembly

• Push ice transport tube onto ice machine nipple

• Install hose clamp

8

➐

➓

➍

➏

➑

➒

self-contained BIN • RIDE Technology

Connect utilities to louvered docking assembly.

External connections

6

6.1

Air-cooled ice machines only Water-cooled ice machines only

➊

➋

➌

➏

2 ft. x 1" OD

silicone tubing

3/4" barb x 3/4" FPT

Minimum 8"

radius

➍

3/4" MPT x 1" slip

1" Stand pipe/Drain

➎

• Rough-in ice machine potable water
supply
3/8” push-in connection will be made at
shut-off valve inside machine

• Remove access panel if necessary

• Connect the silicone tubing to the ice
machine 3/4” drain barb

• Assemble the 3/4” barb x 3/4” FPT to the
3/4” MPT x 1” slip. Connect the other end
of the silicone tubing to the 3/4” barb

• Connect the 1” slip tting to the 1” stand
pipe/drain

Note: Minimum 8” radius on silicone

drain line. Drain line from the ice machine
must have at least 1/4” per foot pitch
(6,4mm/0,3m).

• Apply Petrol-gel to barbed drain tting

• Replace access panel.

➊

.

➎

➋.

.

➌

.

➍

.

➏

6.2

➊

➏

• Rough-in ice machine potable water
supply
3/8” push-in connection will be made at
shut-off valve inside machine

• Remove access panel if necessary

• Connect the silicone tubing to the ice
machine 3/4” drain barb

• Assemble the 3/4” barb x 3/4” FPT to the
3/4” MPT x 1” slip. Connect the other end
of the silicone tubing to the 3/4” barb

• Connect the 1” slip tting to the 1” stand
pipe/drain

Note: Minimum 8” radius on silicone

drain line. Drain line from the ice machine
must have at least 1/4” per foot pitch
(6,4mm/0,3m).

• Connect cooling water supply
return

• Apply Petrol-gel to barbed drain tting

• Replace access panel.

➐

➋

➐

➊

.

➎

➌

➑

2 ft. x 1" OD

silicone tubing

3/4" barb x 3/4" FPT

Minimum 8"

radius

➍

3/4" MPT x 1" slip

1" Stand pipe/Drain

➎

➋.

.

➌

.

➍

.

and

➏

➑

BIN • RIDE Technology self-contained

9

Connect louvered docking assembly to ice

➊

machine.

CAUTION

• Plug must be accessible after nal installation.

• H_E1410A/W 230/50/1 requires a 20A circuit (4.00 mm

Air-cooled ice machines – follow steps 7.1 through 7.5.

2

wire)

Internal connections

7

7. 1

Ice transport tube

➋

➊

• Slide ice machine into louvered docking
assembly ensuring that drain tube is fully
seated on barbed drain tting

• Insert ice transport tube all the way into
coupling and tighten nut rmly

➊

➋

7. 2

• Insert potable water line into valve

Potable water and drain lines

➊

7. 3

• Remove twist tie

• Carefully pass cord thru opening and plug

• For H_E units, install a suitable plug

Power cord

into wall outlet

10

7. 4

• Position plate into opening and secure

self-contained BIN • RIDE Technology

Power cord

with supplied screw

Water-cooled ice machines – follow steps 7.6 through 7.12.

In

Out

CLEAN

7. 5

SERVICE

Set TDS switch

MAINT/CLEAN

LOW WATER

TIME DELAY

SLEEP CYCLE

MAKING ICE

LOW BIN

POWER ON

TDS

HIGH

LOW

• Set the TDS switch on the electrical box:

HIGH: for extended service life

LOW: for low-scale water

7. 6

Cooling lines

• Install ice machine cooling water lines to
louvered docking assembly

7. 7

Ice transport tube

➋

➊

• Slide ice machine into louvered docking
assembly ensuring that drain tube is fully
seated on barbed drain tting

• Insert ice transport tube into coupling and
tighten nut rmly

➋

➊

7. 8

Potable water and drain lines

➊

• Insert potable water line into valve

➊

BIN • RIDE Technology self-contained

11

7. 9

CLEAN

Cooling lines and power

➋

➊

• Connect cooling water lines to ice
machine

• Water valve is set at the factory. DO NOT
remove seal or adjust water valve

➊

➋

7. 1 0

Power cord

• Remove twist tie

• Carefully pass cord thru opening and plug
into wall outlet

• For H_E units, install a suitable plug

7. 11

Power cord

• Position plate into opening and secure
with supplied screw

7. 1 2

SERVICE

TDS switch

MAINT/CLEAN

LOW WATER

TIME DELAY

SLEEP CYCLE

MAKING ICE

LOW BIN

POWER ON

TDS

HIGH

LOW

• Set the TDS switch on the electrical box:

HIGH: for extended service life

LOW: for low-scale water

12

self-contained BIN • RIDE Technology

Install front cover to ice machine.

Front cover

8

Front cover installation –
air-cooled undercounter only

➊

➋

➌

CAUTION

• Keep ventilation openings in the appliance enclosure
clear of obstruction.

• To ensure proper ventilation (if not using supplied grille)
carefully review air circulation specications in section

4.1

Install front cover

➋

➌

• Slide ice machine cover over machine
ensuring that tabs on back of cover
slip under louvers on back of louvered
docking assembly

• Insert and tighten two screws through
cover and into louvered docking assembly

➊

➊

➋

• For air-cooled machines only, install
plastic grill

➌

• Remove and discard plastic grille

• Apply supplied gasket material around
entire opening on skin to prevent air
recirculation

• Attach supplied metal grille to opening in
counter door (see section 4.1)

➋

Ice machine MUST be sanitized prior to operation!

Consult Operation and Service Manual provided with ice machine for sanitizing instructions.

➊

➌

BIN • RIDE Technology self-contained

NOTICE

13

Long tube run recommendations

max. 2 ft (0,6m)

➋

1/4" (6,4mm)

➊

1' (0,3m)

• Pitch ice transport tube to allow melt water to drain towards ice machine

• Secure insulated ice transport tube at least every 2 ft (0,6m) to prevent dips or traps

➊

➋

14

self-contained BIN • RIDE Technology

BIN • RIDE Technology self-contained

15

Horizon, Horizon Elite, Maestro, Harmony, Ice Manager, SafeCLEAN, Sani-Sponge, RIDE and Vision are trademarks of Follett LLC.
Chewblet is a registered trademark of Follett LLC, registered in the US.

801 Church Lane • Easton, PA 18040, USA
Toll free [phone] • [phone]
www.follettice.com

01113240R02

© Follett LLC 4/18