Follett E-ITS500NS-31 User Manual
Ice storage and transport systems
®
with SmartGATE
• Full stainless exterior!
• Non-corroding poly liner!
• All-poly cart for added durability!
ice shield
ITS
Series
Elevated ice storage bins and castered cart systems. Cart slides
into bay below bin for convenient, gravity-fed loading. Widths
from 31" (788mm) to 90" (2286mm) and storage capacities
from 700lbs (318kg) to 3250 lbs (1474 kg) of ice, excluding
carts. Each cart stores an additional 240 lbs (109kg) of ice,
150 lbs(68kg) when used with optional Totes
stainless bin and base exterior standard.
_____________________________________________________
Labor-saving design increases convenience
and safety
• Gravity loading ice saves time, eliminates shoveling
• Castered cart rolls easily, quickly to area of use
• Optional Totes ice carriers allow safe, easy ice distribution in
displays, salad bars, ice dispensers
All-polyethylene cart provides a better way to
move ice within your facility
• Durable, easy-to-clean poly eliminates dents, scratches
• All-poly material reduces damage to walls and xtures
from careless cart drivers
• Oversized wheels make maneuvering easy
• Wide, shallow cart design facilitates removal of ice
• Cart drains to bin drain system when parked in bay
™
ice carriers. Full
Model ITS1350SG-60 (with optional Totes ice carriers in cart)
Ice ows into the castered cart when hopper door is opened,
allowing fast, convenient ice removal.
Optional Totes ice carriers
allow easy, safe ice distribution!
Cart holds 150 lbs (68kg) of ice
when Totes ice carriers are used.
Non-corroding poly liners and hoppers
• Eliminates pitting and staining of liner
• Provides exceptional durability
Totes ice carriers simplify ice distribution
• Six rugged polyethylene Totes ice carriers nest in cart
• Eliminates need to shovel ice from cart
• Easy, safe way to distribute ice in displays
• Slim design ts easily below breath protectors
Other quality construction features
• Full stainless bin and base standard
• Heavy-duty base with built-in drain for bin and cart
• Single, reversible drain connection
• Durable polyethylene lift door with PowerHinge
on ITS700-31, inspection window on ITS500-31
• Stainless tops custom-cut for specic icemaker(s)
™
door hinge
Accessories
• Totes ice carriers (set of 6, one set per cart)
(item# ABICETOTP)
• Additional ice transport cart(s)
• Drain pan (required for some Vogt and Howe icemakers;
consult factory)
• Center partition for 2-bay systems; off-set partition for
3-bay systems
• Plastic shovel (item# ABICSHOVEL)
• Ice paddle and hanging bracket (item# ABICEPADDL)
JOB: ______________________________________________
ITEM: _____________________________________________
801 Church Lane • Easton, PA 18040,USA
Toll free (800) 523-9361 • (610) 252-7301
Fax (610) 250-0696 • www.follettice.com
38.75"
(985mm)
2.75"
(70mm)
31"
(788mm)
60"
(1524mm)
7.88"
(200mm)
7.88"
(200mm)
All models
49"
(1245mm)
90"
(2286mm)
Door arc
18.5"
(470mm)
1.25" (32mm) ID PVC
2"
(51mm)
3.63"
(92mm)
40"
(1016mm)
H
female slip fit connection
H
H
25.5"
(648mm)
24.5"
(623mm)
28"
(712mm)
35"
(889mm)
41.5"
(1055mm)
8"
(204mm)
5"
(127mm)
ITS
15.625"
(423mm)
7.125"
(181mm)
15"
(381mm)
14.375"
(366mm)
6.375"
(162mm)
CANADIAN ENERGY
Series
Ice storage and transport systems
®
with SmartGATE
ice shield
Front View
ITS700SG-31
(without cart in bay)
ITS500NS has
sliding window only
Front View
ITS1350SG-60
(without carts in bays)
ITS2250SG has sliding
window at top of bin
General Notes
• Clearance required to pull cart from
bay – minimum 48" (1220mm), optimal
54" (1372mm)
• Follett recommends installation of a oor
drain with grate with all ice storage bins
• Drain connection is reversible to exit at
left or right side of unit
Front View – ITS3250SG-90
(without carts in bays)
ITS1700SG has no sliding window
Front View
Totes Ice Carrier
Side View
Totes Ice Carrier
Front View
Cart
U.S. Patents 5,211,030
& 5,797,514
All Models
(shown without cart in bay)
Side View
Cart
Model
Number
Cubic Volume
cu ft (m)
Max. Bin
Cap. lb (kg)
1
Max. Cap.
with Carts
1,2
lb (kg)
No.
Carts
Width
in (mm)
Depth
in (mm)
3,5
Depth
with Door
in (mm)
3,5
Height (H)
with Legs
in (mm)
6
Required
Access
in (mm)
Approximate
4
ITS500NS-31 12.7 (0.36) 382 ( 174) 622 ( 283) 1 31 ( 788) 40 (1016) 40 (1016) 60 (1524) 32 ( 813) 446 (203)
ITS700SG-31 21.7 (0.61) 652 ( 296) 892 ( 405) 1 31 ( 788) 40 (1016) 48 (1220) 75 (1905) 32 ( 813) 467 (212)
ITS1350SG-60 44.2 (1.25) 1327 ( 602) 1567 ( 711) 2 60 (1524) 40 (1016) 48 (1220) 75 (1905) 41 (1042) 849 (386)
ITS2250SG-60 71.1 (2.01) 2133 ( 968) 2373 (1077) 2 60 (1524) 40 (1016) 48 (1220) 97 (2464) 41 (1042) 972 (441)
ITS1700SG-90 58.2 (1.65) 1716 ( 779) 1986 ( 901) 3 90 (2286) 40 (1016) 48 (1220) 70 (1778) 41 (1042) 1203 (645)
ITS3250SG-90 108.5 (3.07) 3255 (1477) 3495 (1586) 3 90 (2286) 40 (1016) 48 (1220) 97 (2464) 41 (1042) 1370 (622)
Notes:
1 Computed on cubic volume of bin. Does not reect cart capacity or voids that can occur due to pyramiding.
2 Each cart holds 240 lbs (109kg) without optional Totes ice carriers, 150 lbs (68kg) with Totes ice carriers.
3 Door assemblies remove easily (4 screws) if necessary for installation access.
4 Required clearance for installation access through doors (may require removal of door assembly).
5 Add 2" (51mm) to depth and 10 lbs (4.5kg) to shipping weight when drain pan accessory used.
6 Special top required for icemakers weighing more than 1000 lbs (454kg). Add 2.125" (54mm) to height. Contact factory.
Specications
Follett ice transport system to be model ______ equipped with Follett ice transport cart(s). Elevated bin to hold approximately ______ lbs (kg) of ice. Exterior of bin and base to
be full stainless steel. All bins (except ITS500NS) to have poly snout, poly lift door with PowerHinge door hinge, and SmartGATE ice shield. Stainless steel bin top to be custom
cut for icemaker(s) to be used. Bin liner walls to be of non-corroding poly and insulated with non-CFC foam polyurethane. Bin hopper to be of polyethylene with extra large
opening(s) to facilitate ice ow. Base to have built-in drains for bins and carts, and insulated drain troughs, shutter door, and drain to minimize condensation. Cart(s) to be of
insulated one-piece molded polyethylene, with plastic lid, four heavy-duty casters (two swivel with one step-on lock and two non-swivel). Carts and optional Totes ice carriers to
store below bin when not in use and to drain when positioned in bay. All models to have adjustable anged feet. All models to have a paddle and be NSF-listed.
PowerHinge and Totes are trademarks of Follett Corporation.
SmartGATE is a registered trademark of Follett Corporation, registered in the US.
Follett reserves the right to change specications at any time without obligation. Certications may vary depending on country of origin.
801 Church Lane • Easton, PA 18040,USA
Toll free (800) 523-9361 • (610) 252-7301
Fax (610) 250-0696 • www.follettice.com
PERFORMANCE
RENDEMENT
ENERGETIQUE
EP 2138774
VERIFIED
VERIFIE
© Follett Corporation
Ship
Wt.
lb (kg)
Form #9130
5
11/09
Loading...