Follett E-425-30 User Manual

Slope front ice storage bins

Model E-300-22 – 559 mm (22") wide, stores approximately

136 kg (300 lbs)

Model E-425-30 – 762 mm (30") wide, stores approximately

195 kg (430 lbs)

Model E-600-42 – 1087 mm (42.8") wide, stores approximately

246 kg (543 lbs)

Model E-650-44 – 1118 mm (44") wide, stores approximately

299 kg (660 lbs)

Model E-950-48 – 1220 mm (48") wide, stores approximately

431 kg (950 lbs)

Model E-1025-52 – 1321 mm (52") wide, stores approximately

467 kg (1030 lbs)

Small to medium capacity ice storage bins for use with all major
commercial icemakers. Widths from 559 to 1321 mm (22" to 52")
and storage capacities from approximately 136 to 454 kg (300 to
1000 lbs). All models standard with stainless steel exterior. All
bins include stainless tops custom-cut to accommodate virtually
any ice machine.

_____________________________________________________

Wide range of models to meet varied needs

• Six models to meet a wide range of space and capacity
requirements

• Space-saving 559 mm (22") wide E-300-22 provides perfect
match for compact icemakers

• Wider bins accommodate larger icemakers and side-by-side
installation of smaller cubers and akers

• Model E-600-42 ts through narrow doorways

Convenient, user-friendly design

• Extra large door openings provide maximum access for ice
removal and bin cleaning

• Extra low door sills allow users to easily reach ice at the
bottom of the bin

• 801 mm (31.5") depth ensures that all models t through
standard 813 mm (32") door. Model E-600-42 is
690mm(27") deep and will t through 710 mm (28") door.

Quality construction features

• Stainless steel exterior standard

• Heavy-duty welded steel shell and frame support even heavy
stacks of icemakers

• Non-CFC polyurethane foam insulation bonds shell and liner
for additional rigidity and provides optimal insulation

• Stainless steel bin tops are custom cut for specic
icemaker(s) to be used

• Rigid stainless steel lift doors with non-staining ABS interior
panel are insulated with non-CFC foam polyurethane to
withstand heavy use

• Durable, non-corroding polyethylene liners ensure long life**

• Fully replaceable gasket seals door opening to reduce
meltage

Model E-950-48 shown

Follett Corporation
801 Church Lane • Easton, PA 18040, USA
[phone] • Fax [phone]
www.follettice.com

Accessories

• 153 mm (6") stainless steel legs (item# ABSPECLEGS)

• 204 mm (8") legs (standard on E-300-22) (item# 00161547)

Follett Europe
Mokry Dwór 26C • 83-021 Wislina, Poland
[phone] • fax [phone]
www.folletteurope.com

H

Slope front ice storage bins

Side ViewFront View

3

W

1

2

H

D

C
L

1" MPT x 1" barbed

drain adapter supplied

1" FPT

drain

D

D

362 mm

(14.25")

1

2

General Notes

Follett recommends installation of a oor drain with grate with all ice storage bins.

1

Max. Bin

Model

Number

E-300-22** 0.27 ( 9. 6) 137 (301) 559 (22.0) 750 (29.50) 801 (31.5) 693 (27.25) 1067 (42.0) 674 (26.5) 559 (22) 58 (128)
E-425-30 0.39 (13.8) 197 (432) 762 (30.0) 750 (29.50) 801 (31.5) 693 (27.25) 1016 (40.0) 623 (24.5) 788 (31) 74 (163)
E-600-42** 0.51 (18.1) 258 (567) 1087 (42.8) 686 (27.00) 686 (27.0) 625 (24.60) 1019 (40.1) 739 (29.1) 711 (28) 70 (154)
E-650-44 0.59 (20.8) 296 (652) 1118 (44.0) 750 (29.50) 801 (31.5) 693 (27.25) 1016 (40.0) 623 (24.5) 813 (32) 80 (176)
E-950-48* 0.85 (30.1) 429 (943) 1220 (48.0) 718 (28.25) 801 (31.5) 693 (27.25) 1270 (50.0) 877 (34.5) 813 (32) 105 (232)
E-1025-52* 0.92 (32.6) 464 (1022) 1321 (52.0) 718 (28.25) 801 (31.5) 693 (27.25) 1270 (50.0) 877 (34.5) 813 (32) 112 (247)

Notes:

* Add 42 mm (1.625") to depth and 4.5 kg (10 lbs) to shipping weight when drain pan accessory is required.
** E-300-22 and E-600-42 models have stainless steel bottom liner.

Cubic Volume

m (cu ft)

Capacity

kg (lb)

Width

mm (in)

Depth (D

mm (in)

1

)

Depth (D2)

mm (in)

Depth (D3)

mm (in)

Height (H

with Legs

mm (in)

Door Sill

)

Height (H

mm (in)

Required Door

2

Access

)

mm (in)

Approx. Ship

Weight

kg (lb)

Specications Ice storage bin to be Follett ® model _______. Cubic capacity to be ________, to hold approximately ________ kg/lbs of ice.

Outside dimensions of bin to be _______ wide, ________ deep and ________ high, including legs. Construction to be of welded steel shell
and frame. Exterior nish to be stainless steel front and sides with galvanized steel back and bottom. Bin insulation to be non-CFC
polyurethane foam, bonded to shell and liner for added structural strength. Bin top to be stainless steel and to be custom cut for specic
icemaker(s) to be used. Lift door to have stainless steel exterior and ABS interior, bonded together with non-CFC polyurethane foam for extra
rigidity and strength. Bin to have conveniently low door sill height to allow easy access to ice in the bottom of the bin. Door opening to be
completely sealed with fully replaceable gasketing. Drain to be 1" FPT rigid PVC. Bin to be equipped with 153 mm (6") legs (model E-300-22
has 204 mm (8") legs).

Follett is a registered trademark of Follett Corporation, registered in the US.
Follett reserves the right to change specications at any time without obligation. Certications may vary depending on country of origin.

Follett Corporation
801 Church Lane • Easton, PA 18040, USA
[phone] • Fax [phone]
www.follettice.com

Follett Europe
Mokry Dwór 26C • 83-021 Wislina, Poland
[phone] • fax [phone]
www.folletteurope.com

© Follett Corporation

Form #2865

04/10