Shown with SmartCART™ 75,
other configurations available
Gravity ice dispense eliminates scooping
™
Single door Ice•DevIce
ice storage, dispensing and transport systems
Features
Designed with speed, safety and sanitation in mind
- elevated ice storage bin uses gravity to dispense ice through a
chute seven times faster than scooping
- dispensing directly into cart eliminates scooping by hand to
help prevent cross-contamination
- industry exclusive SmartGATE® ice shield controls the flow of ice
to reduce spill and limit contact with ice
- locks in three positions and returns easily to full down position
Fresher ice
- first ice in is first ice out
Ice compatibility
- compatible with most non-flake ice types, including customer
preferred Chewblet® ice and cube ice
Durable, user-friendly construction
- full stainless bin exterior and base
- corrosion-resistant poly bin liner and ABS top
- heavy duty “stay-open” PowerHinge™ door hinge – easy one
hand open and close without door catches
SmartCART 75 ice cart fits through narrow aisles
- oversized back wheels for easy maneuverability
- holds 75 lb (34 kg) of ice in three Totes™ ice carriers
Easy installation
- comes with ice access door assembly attached to body of bin
- only 31.00" (78.7 cm) wide to fit through standard door openings
by removing front door assembly (4 screws, no sealant)
- drain elbow with 1.00" (2.54 cm) barb fitting provided
Warranty
- parts and labor for corrosion repair for useful life of the product
- 5 years parts and labor on all other integral components
- visit follettice.com for complete warranty details
Includes:
- custom-cut non-corroding ABS top for most popular
icemachines
- optional Flexi-Top™ ice bin top system for 48.00" (121.9 cm) and
60.00" (152.4 cm) wide models – allows many ice machines to
fit one top
- SmartCART 75 ice transport cart with three removable Totes
icecarriers (other configurations on reverse)
- 82 oz plastic ice scoop
- paddle and rake tool set with hanging bracket
Job
Item
Accessories
Additional carts and accessories (refer to form# 3435)
Follett Europe Polska Sp. z o.o.
Mokry Dwór 26C 83-021 Wiślina, Poland
+48 (58) 785-6140 | Fax: +48 (58) 785-6159
folletteurope.com
801 Church Lane | Easton, PA 18040, USA
1.610.252.7301 | Fax: +1.610.250.0696 | follettice.com
Specification
Maximum bin capacity see model table below
W1 Bin width see model table below
D1 Bin depth 31.00" (78.7 cm)
Bin depth with lower door assembly ² 39.00" (99.1 cm)
D2 Bin depth with door fully extended 49.50" (125.7 cm)
H1 Bin height (adjustable) see model table below
H2 Bin base height (adjustable) 24.75" (62.9 cm)
H3 Bin base clearance
Required door access
W2 Cart width 21.50" (54.6 cm)
D3 Cart depth 34.00" (86.4 cm)
H4 Cart height at front edge 20.50" (52.1 cm)
H5 Cart height with lid up 38.62" (98.1 cm)
L1 Drain
Dispense rate
Ice compatibility
Approximate ship weight see model table below
NOTE: For indoor use only
SHORT FORM SPECIFICATION: Ice•DevIce system to be Follett model ____________ elevated bin,
base, and ice transport cart system with front ice chute and industry-exclusive SmartGATE ice
shield. Bin to hold approximately ______ lb (kg) of ice. Exterior finish of bin and base to be full
stainless front, sides, back and bottom. Bin liner to have non-corroding polyethylene walls and
stainless steel bottom. Bin insulation to be CARB compliant non-HFC foam, bonded to shell and
liner for added structural strength. Bin top to be ABS and custom-cut for ice machine(s) to be
used. Lower door assembly to include non-corroding poly access door, poly lift door with
PowerHinge to eliminate gasket and latches, and inner SmartGATE to positively control ice flow
into access door area. Entire lower door assembly to be easily removable for installation through
narrow doors. Upper inspection window (on all models except DEV500SG-30, DEV860SG-48
and DEV1080SG-30) to be double-wall poly to increase durability and minimize ice melt and
condensation. Cart base to be rotomolded polyethylene with hinged plastic lid and drain. Totes
to be of one-piece, molded poly with swivel handle. Cart and Totes to store below bin when
not in use. All models to be equipped with flanged, adjustable feet, paddle and rake tool set.
NSF listed.
5
(adjustable) 21.62" (54.9 cm)
5
32.00" (81.3 cm)
1.00" FPT, center of bin bottom
(drain elbow supplied)
up to 5 lb (2.3 kg) per second
cube ice and Chewblet ice
Dimensional drawing
W1
D2
H1
H2
H3
D1
C
L
FLEXI-TOP, ICE•DEVICE, POWERHINGE, SMARTCART and TOTES are trademarks of Follett LLC.
CHEWBLET, FOLLETT and SMARTGATE are registered trademarks of Follett LLC, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may
vary depending on country of origin.
H4
D3
C
L
L1
W2
H5
with
Model
DEV500SG-30
DEV700SG-30
DEV860SG-48
DEV1010SG-48
DEV1175SG-48
DEV1300SG-48
DEV1160SG-56
DEV1350SG-56
DEV1080SG-60
DEV1325SG-60
DEV1475SG-60
DEV1650SG-60
Notes:
Computed on cubic volume of bin. Does not reflect cart capacity or voids that can occur due to pyramiding.
Lower door assembly easily removed for installation access.
Special top required for ice machines weighing more than 1000 lb (454 kg). Add 0.5" (1.27 cm) to height. Contact factory.
10.00" (25.4 cm) flanged legs available which replace base unit, height from floor to bottom of chute equals 15.50" (39.4 cm), overall height reduced by 14.75" (37.4cm).
Includes one Totes ice carrier instead of cart and uses 4.00" (10.16 cm) chute.
Required clearance for installation access through doors (may require removal of lower door assembly).
Follett recommends installation of a floor drain with grate with all ice storage bins. Consider cart positioning when locating the drain.
Clearance required to pull cart from below bin — minimum 36.00" (91.4 cm), optimal 40.00" (101.6 cm).
DEV500SG-30, DEV860SG-48 and DEV1080SG-60 do not have upper inspection window.
Bagger kit includes 250 plastic bags of 10lb(4.5kg) capacity.
with
SC75 cart
-75 -125 -ICS125L -LP -BG 460 (209) 14.80 (0.41) 30.00 (76.2) 63.00 (160.0) 354 (161)
-75 -125 -ICS125L -LP -BG 680 (308) 21.70 (0.61) 30.00 (76.2) 78.50 (199.4) 389 (177)
-75 -125 -ICS125L -LP -BG 860 (390) 25.50 (0.72) 48.00 (121.9) 65.50 (166.4) 452 (206)
-75 -125 -ICS125L -LP -BG 1000 (454) 31.90 (0.90) 48.00 (121.9) 74.50 (189.2) 453 (206)
-75 -125 -ICS125L -LP -BG 1185 (538) 37.60 (1.06) 48.00 (121.9) 80.50 (204.5) 483 (219)
-75 -125 -ICS125L -LP -BG 1320 (599) 41.90 (1.19) 48.00 (121.9) 84.00 (213.4) 476 (216)
-75 -125 -ICS125L -LP -BG 1170 (531) 37.30 (1.06) 56.00 (142.2) 74.50 (189.2) 472 (214)
-75 -125 -ICS125L -LP -BG 1360 (617) 43.20 (1.22) 56.00 (142.2) 80.50 (204.5) 521 (236)
-75 -125 -ICS125L -LP -BG 1080 (490) 34.30 (0.97) 60.00 (152.4) 65.50 (166.4) 490 (222)
-75 -125 -ICS125L -LP -BG 1325 (601) 42.00 (1.19) 60.00 (152.4) 74.50 (189.2) 518 (235)
-75 -125 -ICS125L -LP -BG 1490 (676) 47.40 (1.34) 60.00 (152.4) 80.50 (204.5) 517 (235)
-75 -125 -ICS125L -LP -BG 1660 (753) 52.80 (1.50) 60.00 (152.4) 84.00 (213.4) 532 (241)
with
SC125 cart
with
Cambro cart
Totes
ice carrier
4
bagger kit
with
Single door Ice•DevIce
9720-201912 | © Follett LLC
Maximum
bin capacity
lb (kg)
Follett Europe Polska Sp. z o.o.
Mokry Dwór 26C 83-021 Wiślina, Poland
+48 (58) 785-6140 | Fax: +48 (58) 785-6159
folletteurope.com
801 Church Lane | Easton, PA 18040, USA
1.610.252.7301 | Fax: +1.610.250.0696 | follettice.com
Cubic volume
cu ft (m)
Width - W1
in (cm)
Height , - H1
in (cm)
Approximate
ship weight
lb (kg)