Gravity ice dispense eliminates scooping
™
Double door Ice•DevIce
ice storage, dispensing and transport systems
Features
Designed with speed, safety and sanitation in mind
- elevated ice storage bin uses gravity to dispense ice through a
chute 7x faster than scooping
- dispensing directly into a cart eliminates scooping by hand to
help prevent cross contamination
- better access to safely loosen congealed ice
- no bending into bin means more sanitary ice removal without
a scoop or shovel
- industry exclusive SmartGATE™ ice shield locks in three
positions and returns easily to full down position
Fresher ice
- first ice in is first ice out
Ice compatibility
- compatible with most non-flake ice types, including customer
preferred Chewblet® ice and cube ice
- dual access doors allow for dispensing two dierent ice types
with use of center partition accessory
Durable, user-friendly construction
- full stainless bin exterior and base
- corrosion-resistant poly bin liner and custom-cut stainless
steeltop
- heavy duty “stay-open” PowerHinge™ door hinge – easy one
hand open and close without door catches
SmartCART™ 75 ice cart fits through narrow aisles
- oversized back wheels for easy maneuverability
- the two SmartCART 75 ice carts holds 150 lb (68 kg) in six
Totes™ ice carriers
- wide variety of other carts available
Easy installation
- comes with ice access door assembly attached to body of bin
- drain elbow with 1.00" (2.54 cm) barb fitting provided
Includes:
- custom-cut stainless steel top
- two SmartCART 75 ice transport carts, each with three
removable Totes icecarriers (refer to chart on reverse for
otherconfigurations)
- 82 oz plastic ice scoop
- paddle and rake tool set with hanging bracket
Job
Item
Accessories
Additional carts and accessories (refer to form# 3435)
Follett Europe Polska Sp. z o.o.
Mokry Dwór 26C 83-021 Wiślina, Poland
+48 (58) 785-6140 | Fax: +48 (58) 785-6159
folletteurope.com
801 Church Lane | Easton, PA 18040, USA
1.610.252.7301 | Fax: +1.610.250.0696 | follettice.com
Specification
Maximum bin capacity see model table below
W1 Bin width see model table below
D1 Bin depth see model table below
D2 Bin depth with door fully
extended
H1 Bin height (adjustable) see model table below
H2 Bin base height (adjustable) 24.75" (62.9 cm)
H3 Bin base clearance (adjustable) 21.62" (54.9 cm)
Required door access see model table below
W2 Cart width 21.50" (54.6 cm)
D3 Cart depth 34.00" (86.4 cm)
H4 Cart height at front edge 20.50" (52.1 cm)
H5 Cart height with lid up 38.62" (98.1 cm)
L1 Drain 1.00" FPT, center of bin bottom
Dispense rate up to 5 lb (2.3 kg) per second
Ice compatibility cube ice and Chewblet ice
Shipping weight see model table below
NOTE: For indoor use only
add 18.50" (47.0 cm)
(drain elbow supplied)
Dimensional drawing
W1
H1
H2
H3
D1
H4
D3
DEV2100,
DEV2250,
DEV2650
D2
H5
W2
DEV3200,
DEV3900,
DEV4600
SHORT FORM SPECIFICATION:
bin, base and cart system with front ice chute and industry-exclusive SmartGATE ice shield. Bin to
hold approximately ______ lb (kg) of ice. Exterior nish of bin and base to be full stainless front,
sides, back and bottom. Bin liner on all models to be heavy-duty, non-corroding polyethylene. Bin
liner to have non-corroding polyethylene walls and stainless steel bottom. Bin top to be stainless
and custom-cut for ice machine(s) to be used. Lower door assembly to include non-corroding
polyethylene ice access door assembly, polyethylene lift door with PowerHinge door hinge to
eliminate gaskets and latches, and inner SmartGATE ice shield to positively control ice flow into
ice access door assembly area. Entire lower door assembly to be easily removable for installation
through narrow doors. Where used, upper inspection windows to be molded double-wall plastic
to increase durability while minimizing meltage and condensation. All models to be equipped
with flanged, adjustable feet, paddle and rake tool set. NSF-listed.
Ice•DevIce system to be Follett model ______ elevated
Warranty:
Follett Corporation warrants to the original purchaser that the cabinet exterior, including the top
and trim, and the interior liner will be free of corrosion for the useful life of the product. Parts
and labor for corrosion repair are covered under this warranty. All other integral components are
covered against defects in material and workmanship under normal use and service for a period
of 5 years from the date of installation. Date of installation shall not exceed 90 days from date
of shipment. Parts and labor for repair within this 5year period are covered under this warranty.
Removal of ice machine to service bin and any labor costs incurred are expressly excluded from
this warranty
Ice•DevIce, PowerHinge, SmartCART and Totes are trademarks of Follett Corporation.
Chewblet, Follett and SmartGATE are registered trademarks of Follett Corporation, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may vary depending on country of origin.
with
with
SC75
Model
DEV2100SG-72
DEV2250SG-72
DEV2650SG-72
DEV3200SG-72
DEV3900SG-72
DEV4600SG-72
Notes:
Computed on cubic volume of bin. Does not reflect cart capacity or voids that can occur due to pyramiding.
Add 8.00" (20.32 cm) to depth (D) for lower door assembly (easily removed for installation access).
Special top required for ice machines weighing more than 1000 lb (454 kg). Add 2.12" (5.38 cm) to height. Contact factory.
Required clearance for installation access through doors (may require removal of door assembly).
Follett recommends installation of a floor drain with grate with all ice storage bins. Consider cart positioning when locating the drain.
Clearance required to pull cart from below bin — minimum 36.00" (91.4 cm), optimal 40.00" (101.6 cm).
Form #2320 04/15
© 2015 Follett Corporation
SC125
cart
cart
-75 -125 -ICS125L
-75 -125 -ICS125L
-75 -125 -ICS125L
-75 -125 -ICS125L
-75 -125 -ICS125L
-75 -125 -ICS125L
with
Cambro
cart
Maximum
bin capacity
lb (kg)
2110 ( 957) 67.1 (1.90)
2250 (1021) 71.5 (2.02)
2650 (1202) 84.0 (2.38)
3240 (1470) 102.7 (2.90)
3940 (1787) 125.1 (3.54)
4640 (2105) 147.4 (4.17)
Cubic
Volume
cu ft (m)
Width - W1
in (cm)
Depth - D1
72.00 (182.9) 40.00 (101.6) 75.50 (191.8) 41.00 (104.1) 841 (381)
72.00 (182.9) 48.00 (121.9) 69.50 (176.5) 46.00 (116.8) 863 (344)
72.00 (182.9) 40.00 (101.6) 85.50 (217.2) 41.00 (104.1) 943 (428)
72.00 (182.9) 48.00 (121.9) 88.50 (224.8) 35.00 (88.9) 1144 (519)
72.00 (182.9) 48.00 (121.9) 100.50 (255.3) 44.00 (111.8) 1263 (573)
72.00 (182.9) 48.00 (121.9) 112.00 (284.5) 47.00 (119.4) 1276 (579)
Follett Europe Polska Sp. z o.o.
Mokry Dwór 26C 83-021 Wiślina, Poland
+48 (58) 785-6140 | Fax: +48 (58) 785-6159
folletteurope.com
801 Church Lane | Easton, PA 18040, USA
1.610.252.7301 | Fax: +1.610.250.0696 | follettice.com
in (cm)
C
L
Height - H1
C
in (cm)
L
L1
Required door
access
in (cm)
Approximate
ship weight
lb (kg)