Follett D400A Installation Manual

D400A/W Icemaker

Order parts online
www.follettice.com

Installation Manual

D400A icemaker

D400W icemaker

801 Church Lane • Easton, PA 18040, USA
Toll free [phone] • [phone]
Fax [phone] • www.follettice.com

208799R03

Welcome to Follett

D400A

Condenser type

A – air-cooled
W – water-cooled

Icemaker capacity and refrigerant

400 – 400 lbs (181kg)/day, R404A

Icemaker Series

D – Replacement icemaker, Symphony ice and water dispenser

Follett equipment enjoy a well-deserved reputation for excellent performance, long-term reliability and outstanding
after-the-sale support. To ensure that this dispenser delivers that same degree of service, we ask that you take a
moment to review this manual before beginning the installation of the unit. Our instructions are designed to help
you achieve a trouble-free installation. Should you have any questions or require technical help at any point,
please call our technical service group at [phone] or [phone].

Before you begin

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If
damage is found, notify the shipper immediately and contact Follett Corporation so that we can help in the  ling
of a claim, if necessary.

Check your paperwork to determine which model you have. Follett model numbers are designed to provide
information about the type and capacity of Follett ice dispensing equipment. Following is an explanation of the
different model numbers in the 400 series.

Materials supplied

For air- and water-cooled

(1) D400A/W icemaker

(1) Ice transport tube – 18.5"

(1) Hose clamp

(1) Drain tube – 21"

(1) Fitting – 120, elbow˚

(1) Fitting reducer – 5/8" x 1/4"

(1) Electrical box mounting bracket – F25, F50, F100

(2) Electrical box mounting brackets – Symphony™

(5) Cable ties – medium

(2) Cable ties – small

(1) Installation and Operation Manual

(1) D400A/W Installation Manual

(1) 2 lead female bin signal connector and wire

For water-cooled only

(2) Fitting – 90°, brass – C25, C50

(2) Fitting – 90°, plastic – Symphony top mount units

(1) Drain connection  tting

2

Note: This icemaker is intended to be used in all freestanding and top mount applications with the
exception of C110T5A/W.

1. If icemaker will be installed in a Symphony series ice dispenser remove base spacer (Fig.1).

Fig. 1

tri-point screw, 10-32 x 1/2"

base spacer

3/8" FPT condenser inlet

3/8" FPT condenser outlet

tri-point screw, 10-32 x 1/2"

base spacer

3