Page 1
ALPHA 80 EVO
Product sheet
Alpha 80 Evo has a 1" (25mm) Aluminium tweeter and a 8" (20cm) woofer with Slatefiber cone developed and
manufactured in Focal's workshops in France. This monitor features excellent dynamics and neutrality in its
tonal balance. Thanks to new technologies and features, Alpha 80 Evo is highly versatile. Alpha 80 Evo will suit
perfectly producers seeking for high SPL levels as well as deep low-end extension.
Automatic disengageable
stand-by mode
3 inputs: XLR, TRS and RCA
Inserts for wall fastening
Bass and treble
level settings
Key points
• Excellent dynamics
• Wide dispersion enabling the same sound to be maintained throughout the entire room
• Slatefiber cone manufactured in France: sound neutrality, no distortion
• Identical tonal balance at both low and high volume
• Connect up to 3 audio sources
• Inserts for wall fastening
• Protective grills included
Aluminium inverted
dome tweeter
8" (20cm) Slatefiber
cone woofer
Large laminar port
Type Alpha 80 Evo Monitoring
Frequency response
(+/- 3dB)
Maximum SPL 106dB SPL (peak @ 1m)
Inputs
Connectors
Medium and low
frequency amplifier
High frequency amplifier 35W
Automatic
stand-by mode
Power supply
Connection
Sensitivity Adjustable, 0 or +6dB
Focal® is a Focal-JMLab® brand - www.focal.com - SCCG - v1 - 06/10/2021
38Hz - 22kHz
TRS: symmetrical 10kOhms
XLR: symmetrical 10kOhms
RCA: asymmetrical 10kOhms
with compensated sensitivity
80W
After around 15 minutes of no use
By signal detection >6mV
100 - 240V~
(T2AL fuse/250V)
IEC socket and detachable
power cable
Level midrange/bass
(0 - 250Hz)
Treble level (4.5 - 35kHz) Adjustable, +/-3dB
Power on/o On/off switch on the rear panel
Stand-by consumption <0.5W
Views and controls On and off LED - Stand-by LED
Woofer
Tweeter
Construction 0.6" (15mm) MDF
Finish Black vinyl and paint
Dimensions with 4 rubber
feet (HxWxD)
Weight 21.6lbs (9.8kg)
Adjustable, +/-6dB
8" (20cm)
Slatefiber cone
25mm (1") with aluminium
inverted dome
15.35x11.65x13"
(390x296x330mm)
Loading...