ALPHA 80
Product Specification Sheet
Alpha 80, the flagship of the line, is equipped with a 1" (25mm) tweeter and an 8" (21cm) woofer. It features a 40W amplifier for the tweeter and a
100W amplifier for the woofer, and has a frequency response of 35Hz to 22kHz (+/- 3dB). This model is particularly ideal for producing music which
is rich in bass or which requires high power reserves.
Automatic
standby mode
Aluminium inverted
2 constantly active
XLR and RCA inputs
dome tweeter
Adjustable bass
and treble levels
Key points
•
Low directivity: keeps the same sound throughout the room
• Damping and rigidity: neutrality, no distortion
• Tonal balance is identical at low and high volumes, low sensitivity to the wall effects
• Connect up to 2 audio sources
• Optimal acoustic integration
• Reduced power consumption
Type Monitoring Alpha 80
Frequency response
(+/- 3dB)
Power 140W (100W+40W)
Maximum SPL 109dB SPL (pic @ 1m)
Electronic section
Inputs
Connectors
LF amplifier stage 100W, class AB
HF amplifier stage 40W, class AB
Standby mode
Standby
Activation of the monitor
Power supply
(The voltage can not be
modified)
Connection IEC inlet and detachable power cord
35Hz - 22kHz
XLR balanced 10kOhms
RCA unbalanced 10kOhms
with sensitivity compensation
After about 30 minutes
without using the monitor
By signal detection >3 mV
220-240V
(fuse T1.6AL/250V)
or 100-120V
(fuse T3.15AL/250V)
User controls
Sensitivity Adjustable, 0 or +6dB
LF shelving (0 - 300Hz) Adjustable, +/-6dB
HF shelving (4.5 - 22kHz) Adjustable, +/-3dB
Power ON/OFF Switch on rear panel
Standby mode
power consumption
Indicators Power ON/OFF LED - Standby LED
Transducers
Woofer 8" (21cm) drive unit - Polyglass cone
Tweeter
Cabinet
Construction 0.6" (15mm) MDF
Finish Vinyl and Black painting
Dimensions
with 4 rubber pads (HxWxD)
Weight 28.2lb (12.8kg)
8" (21 cm)
Polyglass cone
Large front
port
< 0,5W
1" (25mm) drive unit.
Aluminium inverted dome
15.6x11.3x13.7" (397 x 287 x 348mm)
Focal® is a trademark of Focal-JMLab® - www.focal.com - SCFG140228/1