Focal ALPHA 50 EVO USER MANUAL

ALPHA 50 EVO

Product sheet

Alpha 50 Evo has a 1" (25mm) Aluminium tweeter and a 5" (13cm) woofer with Slatefiber cone developed and
manufactured in Focal's workshops in France. This monitor features excellent dynamics and neutrality in its
tonal balance. Thanks to new technologies and features, Alpha 50 Evo is highly versatile.

Automatic disengageable

stand-by mode

3 inputs: XLR, TRS and RCA

Inserts for wall fastening

Bass and treble

level settings

Key points

• Excellent dynamics

• Wide dispersion enabling the same sound to be maintained throughout the entire room

• Slatefiber cone manufactured in France: sound neutrality, no distortion

• Identical tonal balance at both low and high volume

• Connect up to 3 audio sources

• Inserts for wall fastening

• Protective grills included

Aluminium inverted
dome tweeter

5" (13cm) Slatefiber
cone woofer

Large laminar port

Type Alpha 50 Evo Monitoring

Frequency response
(+/- 3dB)

Maximum SPL 101dB SPL (peak @39

Inputs
Connectors

Medium and low
frequency amplifier

High frequency amplifier 20W (music), class D

Automatic
stand-by mode

Power supply

Connection

Sensitivity Adjustable, 0 or +6dB

Focal® is a Focal-JMLab® brand - www.focal.com - SCCG - v1 - 21/12/2020

45Hz - 22kHz

3/8

" (1m))

TRS: symmetrical 10kOhms
XLR: symmetrical 10kOhms
RCA: asymmetrical 10kOhms
with compensated sensitivity

30W (music), class D

After around 15 minutes of no use
By signal detection >6mV

100 - 240V~
(T2AL fuse/250V)

IEC socket and detachable
power cable

Level midrange/bass
(0 - 300Hz)

Treble level (4.5 - 22kHz) Adjustable, +/-3dB

Power on/o On/off switch on the rear panel

Stand-by consumption <0.5W

Views and controls On and off LED - Stand-by LED

Woofer

Tweeter

Construction 0.6" (15mm) MDF

Finish Black vinyl and paint

Dimensions with 4 rubber
feet (HxWxD)

Weight 13.1lbs (5.95kg)

Adjustable, +/-6dB

5" (13cm)
Slatefiber cone

25mm (1") with aluminium
inverted dome

12.2 x 9 x 9.41"
(310 x 228 x 239mm)