FNW XPTT User Manual
Figure XPTT
GAUGES & THERMOMETERS
LOW LEAD COMPLIANT
PRESSURE/TEMPERATURE TEST PLUG
The gure XPTT lead free brass pressure/temperature test plugs
facilitate quick pressure and temperature readings at recommended
test points without disturbing the process. They are widely used in
the HVAC industry.
Features:
• 1,000 PSI Maximum Operating Pressure
• 1/4” or 1/2” MNPT End Process Connection
• Lead Free Brass Body
• Complies with Federal Lead-Free Law (Sec. 1417)
• EPDM Diaphragm/Core
• Plastic Cap Retainer
• 302°F (150°C) Process Temperature Limit
Low Lead Compliant: Referring to laws dening “Lead
Free” as wetted surface of pipe, ttings and xtures in
potable water systems that have a weighted average
lead content ≤ 0.25% per the Safe Drinking Water Act
(Sec. 1417) amended 1-4-2011 as well as other state
regulations.
Part Numbers
Size Part Number
1/4” FNWXPTTB
1/2” FNWXPTTD
LOW
LEAD
COMPLIAN T
DOC: FNWXPTT13 Ver. 10/2013
© 2013 - FNW. All rights reserved.
The FNW logo is a trademark of Ferguson Enterprises, Inc., PL Sourcing, PO Box 2778, Newport News, VA 23609 www.fnw.com
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as
warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and
conditions, which are available on request. We reserve the right to modify or improve the designs or specications of our products at any time without notice. Always
verify that you have the most recent product specications or other documentation prior to the installation of these products.
Loading...