Figure NBG (R & Z)
PIPING PRODUCTS
NUT, BOLT, GASKET KIT
RED RUBBER & ZINC PLATED CARBON STEEL
Features
•• For ANSI 150# Flanges
•• Full Face & Ring Style
•• 1/16” & 1/8” Thickness
•• Lengths for Joining Two Flanges*
•• Red Rubber (Styrene-Butadiene or SBR) Gasket
•• Carbon Steel Steel Hardware
•• Hardware Finish: Zinc Plated
•• Sizes: 1/2” to 18” **
Standards
•• Gaskets
○○ Meets ASME B16.21 for 150# Gaskets
○○ Dimensions: ASME B16.5
•• Bolts
○○ Material - ASTM A307A Grade A
○○ Dimensions - ASME B18.2.1
○○ Thread - Class 2A
•• Nuts
○○ Material - SAE J995 Grade 2
○○ Dimensions - ASME B18.2.2
○○ Thread - Class 2B
Properties***
•• Gaskets
○○ Max. Temperature: 170°F (77°C)
○○ Min. Temperature: -20°F (-29°C)
○○ Max. Pressure: 200 PSIG (13.8 Bar)
○○ Max Pressure x Temperature (PxT) - 20,000 (°F x PSIG)
○○ Durometer Hardness: 75 Shore A±5
○○ Tensile: 400 PSI
○○ Elongation: 150%
○○ Compression Set (22 Hrs @ 158°F): 35%
○○ Heat Aging (94 Hrs @ 158°F):
○○ Change in Hardness: +5 Shore A
○○ Change in Tensile: -15%
○○ Change in Elongation: -35%
○○ Finish: Smooth
•• Bolts
○○ Tensile - 60 KSI Minimum
○○ Elongation: 18% Minimum
○○ Hardness: 69 - 100 Rb
*Based on 1/16” raised face and 1/8” gasket
**Not all configurations are available in all sizes. Please see the part number list on the back page
***Gasket properties and application parameters shown on this data sheet are typical. Failure to select proper sealing products could result in property damage and/or serious personal injury.
www.fnw.com