Figure XPS
GAUGES & THERMOMETERS
LOW LEAD COMPLIANT
PRESSURE SNUBBER
The gure XPS lead free brass snubber, when placed before a
pressure gauge, signicantly lessens the damaging effects of
pulsation on gauges, transducers, transmitters, manometers, and
pressure switches.
Features:
• 10,000 PSI Maximum Operating Pressure
• 30,000 PSI Burst Pressure
• 1/4” FNPT End Instrument Connection
• 1/4” MNPT End Process Connection
• Lead Free Brass Body
• Complies with Federal Lead-Free Law (Sec. 1417)
• Sintered (Porous Type) 316SS Snubbing Element
• Stainless Steel Retainer
• -65°F to 650°F (-53°C to 343°C) Process Temperature Limit
• Standards
• NPT Connections Per ASME B1.20.1
• Meets ASME B40.100 for Snubbers (Includes B40.5)
Low Lead Compliant: Referring to laws dening “Lead
Free” as wetted surface of pipe, ttings and xtures in
potable water systems that have a weighted average
lead content ≤ 0.25% per the Safe Drinking Water Act
(Sec. 1417) amended 1-4-2011 as well as other state
regulations.
Part Number
Size Part Number
1/4” FNWXPSB
LOW
LEA D
COMPL IAN T
DOC: FNWXPS13 Ver. 10/2013
© 2013 - FNW. All rights reserved.
The FNW logo is a trademark of Ferguson Enterprises, Inc., PL Sourcing, PO Box 2778, Newport News, VA 23609 www.fnw.com
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as
warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and
conditions, which are available on request. We reserve the right to modify or improve the designs or specications of our products at any time without notice. Always
verify that you have the most recent product specications or other documentation prior to the installation of these products.
Loading...