FNW X440 User Manual
Figure X440
BRASS BODY BALL VALVES
LOW LEAD COMPLIANT
2 PC FULL PORT 600 WOG
w/ ISO MOUNTING PAD
Features:
• 600 WOG
• 150 PSI WSP
• Full Port
• NSF 61 Annex G Certied (UL)
(Annex G references NSF 372)
• Blow-out Proof Stem
• Double Viton® O-ring Stem Seal with
Additional PTFE Seal
• Threaded NPT Ends
• Forged Brass Body & End Cap
• Viton® O-ring Backed Seats for Reduced
Operating Torque
• Mounting Pad for Direct Mount Actuation
• 100% Electronically Tested in Open & Closed
Position at 80 PSI
• Sizes 1/2” to 2”
Standards:
• Design: MSS SP-110*
• End Connections: ANSI B1.20.1
• Seat/Shell Test: MSS SP-110
• Mounting Pad: ISO 5211
* The specication MSS SP-110 addresses
valves design with handles. The X440
does not include a handle. Other than
this exception, the valve meets the design
criteria of the specication.
NOT FOR USE AT OR BELOW GROUND
LEVEL
Low Lead Compliant: Referring to laws dening “Lead
Free” as wetted surface of pipe, ttings and xtures in
potable water systems that have a weighted average
lead content ≤ 0.25% per the Safe Drinking Water Act
(Sec. 1417) amended 1-4-2011 as well as other state
regulations.
Cv, Torque & Weight
Size Cv
1/2 19 52 1.0
3/4 19 52 1.0
1 34 52 1.6
1-1/4 50 52 2.2
1-1/2 268 154 4.3
2 309 154 5.6
Torque
(in-lbs)
Wt (lbs)
Figure Number Matrix
LOW
LEAD
COMPLIANT
FNW X440 Size
SIZE CODE
1/2 = D
3/4 = F
1 = G
1-1/4 = H
1-1/2 = J
2 = K
www.fnw.com
BRASS BODY BALL VALVES
LOW LEAD COMPLIANT
2 PC FULL PORT 600 WOG
w/ ISO MOUNTING PAD
Standard Materials
Ref.
No.
4A Seat Backing O-ring FKM (Viton®) 2
7A Stem O-ring FKM (Viton®) 2
10 Thrust Washer PTFE 1
Description Material Qty
1 Body Brass CW 510L 1
2 Ball
3 End Cap Brass CW 510L 1
4 Seat PTFE 2
6 Stem Brass CW 510L 1
7 Stem Seal PTFE 1
Figure X440
Brass CW 510L
(TEA Plated)
1
Dimensions (inches)
SIZE ØD L H h S ISO 5211 Ød1
1/2 0.56 2.64 1.28 0.35 0.354 1.42/F03 0.24
3/4 0.75 3.00 1.36 0.35 0.354 1.42/F03 0.24
1 0.95 3.35 1.79 0.35 0.354 1.42/F03 0.24
1-1/4 1.18 3.66 1.93 0.35 0.354 1.42/F03 0.24
1-1/2 1.49 4.13 2.52 0.43 0.433 1.97/F05 0.27
2 1.97 4.80 2.88 0.43 0.433 1.97/F05 0.27
DOC: FNWX44013 Ver. 10/2013
© 2013 - FNW. All rights reserved.
The FNW logo is a trademark of Ferguson Enterprises, Inc., PL Sourcing, PO Box 2778, Newport News, VA 23609
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as
warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and
conditions, which are available on request. We reserve the right to modify or improve the designs or specications of our products at any time without notice. Always
verify that you have the most recent product specications or other documentation prior to the installation of these products.
Loading...