FNW X415 User Manual
Figure X415
BRASS BODY BALL VALVES
LOW LEAD COMPLIANT
2 PC FULL PORT* 600 WOG
Features:
• 600 WOG Non-Shock
• 400 PSI Maximum for FM Approved
Applications
• 150 WSP
• Full Port*
• NSF 61 Annex G Certied (UL)
(Annex G references NSF 372)
• Threaded NPT Ends (ANSI B1.20.1)
• Forged Brass Body & Endcap
• 100% Electronically Tested in Open &
Closed Position at 80 PSI
• Meets MSS SP-110 Standards
• FM & CSA Approved (1/2”~2”)
• Blow-out Proof Stem
• Dual O-ring Non-adjustable Packing**
• Accessories (Sold Separately)
○ Lock Lever Kit (1/4”~4”)
○ Stem Extension Kit (1/4”~4”)
○ Tee Handle Kit (1/4”~1”)
○ Oval Handle Kit (1/4”~2”)
○ Memory Stop Kit (1/4”~2”)
○ Stainless Handle (1/4”~2”)
* 4” Valve is Standard Port
** 1/4” & 3/8” Utilize one o-ring, one packing ring
and adjustable packing nut
NOT RECOMMENDED FOR BURIED SERVICE
Locking Handle Kits Stem
• CSA Clas 3371-08, ANSI Z21.15/CSA9.1, 1/2 PSIG, -40°F~149°F
• CSA Class 3371-10, CGA 3.16, 125 PSIG, -40°F~149°F
• CSA Class 3371-12, CR91-002, 2 & 5 PSIG, -40°F~149°F
• CSA Class 3371-88, ANSI Z21.15/CSA9.1, 1/2 PSIG, -40°F~149°F
• CSA Class 3371-90, ASME B16.33/B16.38, 125 PSIG, -40°F~149°F
• CSA Class 3371-92, ASME B16.44, 5 PSIG, -40°F~149°F
Accessories
Tee Handle Kits
Extension Kits
Oval Handle Kits
LOW
LEAD
COMPLIANT
Gas Approvals
Memory
Stops
1/2” ~ 2”
Stainless Steel
Handle
1/2” ~ 2”
Figure Number Matrix
FNW X415 Size
SIZE CODE
1/4 = B
3/8 = C
1/2 = D
3/4 = F
1 = G
1-1/4 = H
1-1/2 = J
2 = K
2-1/2 = L
3 = M
4 = P
Kit Codes (Order Separately)
Locking Handle = LHK
Stem Extension = SE
Tee Handle = THK
Oval Handle = OHK
Memory Stop = MSK
Stainless Handle = SSHK
Note: The gure X415 uses the same accessories as the 420.
Since the 4” valve is standard port, the accessories for the
2-1/2”, 3” valves also t the 4” size.
www.fnw.com
FNW 420 Kit Size
KIT TYPE
SIZE CODE
1/4”~1/2” = BD
3/4”~1” = FG
1-1/4”~1-1/2” = HJ
2” = K
2-1/2”~4” = LM
BRASS BODY BALL VALVES
LOW LEAD COMPLIANT
2 PC FULL PORT* 600 WOG
Figure X415
Sizes 1/4” & 3/8”
Sizes 1/2” & 3/4”
Sizes 1” to 4”
Standard Materials
Ref.
Description Material Qty Remarks
No.
1 Body Brass CW 510L 1
2
3 End Cap Brass CW 510L 1
4 Seat PTFE 2
6 Stem
7
7A Stem O-ring NBR 1
7B Stem O-ring FKM 1 1/2” & larger only
8 Handle Steel DD11 1
9
10
11 Gland Nut Steel CL 04 1 1/4” & 3/8” only
11A
13 Handle Nut Steel CL 04 1
Ball
Stem
Packing
Handle
Sleeve
Thrust
Washer
Packing
Gland
Brass CW 510L
(TEA Plated)
Brass CW 510L
(TEA Plated)
PTFE 1 1/4” & 3/8” only
Vinyl 1
PTFE 1
Brass CW 614N
(Nickel Plated)
Dimensions (inches)
Size ØD E L H
1/4 0.39 3.78 2.03 1.67
3/8 0.39 3.78 2.03 1.67
1/2 0.55 3.78 2.22 1.77
3/4 0.75 4.76 2.46 2.22
1 0.94 4.76 3.01 2.32
1-1/4 1.19 5.94 3.37 2.85
1-1/2 1.50 5.94 3.70 3.09
2 1.95 6.30 4.33 3.70
2-1/2 2.44 8.07 5.16 4.59
3 2.99 8.07 5.94 4.98
4 2.99 8.07 6.50 4.98
Solid ball 1/4” to 3/4”
1
Hollow ball 1” & larger
1
1 1/4” & 3/8” only
Cv & Weights
Size Cv Wt. (Lbs)
1/4 6 0.34
3/8 7 0.30
1/2 19 0.40
3/4 34 0.70
1 45 0.97
1-1/4 75 1.63
1-1/2 180 2.17
2 210 3.83
2-1/2 400 6.69
3 650 9.88
4 650 12.51
DOC: FNWX41513 Ver. 8/2013
© 2013 - FNW. All rights reserved.
The FNW logo is a trademark of Ferguson Enterprises, Inc., PL Sourcing, PO Box 2778, Newport News, VA 23609
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as
warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability.
conditions, which are available on request. We reserve the right to modify or improve the designs or specications of our products at any time without notice. Always
verify that you have the most recent product specications or other documentation prior to the installation of these products.
All sales are governed by our terms and
Loading...